Cisco VCS VCSE H323 Support LAN2 missing
Hello community,
After the upgrade VCS to 8.7.1 I see below the H323 config just LAN1 is activated it. I use LAN2 for external connections. So, for this interface, that there is no possible connection with calls H323 1720 from the outside. Have they changed it? There are always two interfaces active in SIP.
Now they dial-in can´t us on H323 like
Can we do a downgrade and restore the config? Is there a known change? Nothing in the Release Notes. Thanks for help. Have you tried to call your VCS-E from the outside and to see if it's actually not accessible, or by using SSH check the State of H323 with command: xStatus H323? I saw no bug on this topic. I would downgrade to the previous version you are running, if the second address lan reappears, Sue to get it looked at TAC. It could be a bug or just a cosmetic problem. Tags: Cisco Support License VCS\VCSE of virtual machine hardware migration. Hi all I want to migrate my hardware to virtual VCS\VCSE. Both servers are covered by the active maintenance contract. How licenses work in this case? What is the procedure of transfer? Any cost? Thank you. Hello About Cisco VCS, you want to migrate virtual machine hardware, you will need to purchase a new license to make the transfer. These are the partnumbers you need: R-VMVCS-C-M-K9 HW migration to E - Delivery Virtual VCS only controls R-VMVCS-E-M-K9 HW migration to E - Delivery Virtual VCS Highway only Please contact your Cisco representative for more information. After purchasing the license, the license of the VM device rehost will be made by a specific Cisco team, not the team of global license, it is a process different rehost. You will need to send your request to [email protected] / * /, this team will provide instructions to rehost your VCS license correctly. I hope this helps. Concerning Paulo Souza Please note the answers and mark it as "answered" as appropriate. Do we need to purchase the license to upgrade the VCS, VCSe and TMS? Hello We need to get a new license when upgraded version of VCS, VCSe and TMS? Hi Kelvin, xxx. OVA files are package files to deploy the VCS on virtualize platforms. Release key are required to upgrade the VCS for major updates. for p. ex. upgrade of x 6 x 7 software version worm. However for improvements minor as x7.2 to x7.2.2 these are the released hotfix version or bux fixes release and you don't need a license for this upgrade. in any case if you your devices are less covered by valid contract you can get the license key anytime just contact cisco license team on "[email protected] / * /" and they should be able to provide the necessary license. Rgds Alok My help and Support is missing from my Vista My help and Support is missing from my Vista, and I'm in trouble. I write articles in this Forum. This question is not the healing of my problem; It's curiosity, because every time I'm looking for help and Support, I see a list of users, but my article is never seen; where they is gon? Admitted that I am a new enterent but my items are not! Hi Tali432hus, 1. are you referiing to this post, that you created in the Web site of the answer? If so, you can check your profile page and see if it is listed. You can also see the response to your message. Hope this information is useful. Restricting calls between a subarea and specific extensions on Cisco VCS Hello, I use Cisco VCS 8.5.3, my goal is to restrict calls between a subarea and specific extensions. XML file: But when I apply the XML file, or try using the web simple rule (for example: 11111 12222 destination source, dismiss the action) I'm still able to place the call to 11111 to 12222. What can be the cause of the problem and what else can I try to be able to prohibit calls between a particular Subzone and exentions? Attached, is an example of CPL script that should work. Using this script, CPL, I was able to block calls to a subarea set to a destination alias located in the subzone of default and was always able to call any other end point in the default subfield without problem. Note that you must enter the name of the subarea, as you have configured on the VCS, including spaces if they exist. The scenario is based on the example of CPL "limiting access to a local gateway" X8.5 VCS Administrator's Guide on pg 413, other documents of CPL reference and examples can be seen starting on pg 410. Cisco VCS and MCU - Conference does not Dear community members I have problems in the VCS configuration to work with the MCU to join to several endpoints in a conference. The components that I use: -Cisco VCS control v8.7. -Cisco 5300 MCU 5310 v 4.5 (1.72) -3 x SX20 end points I recorded every endpoint and MCU on VCS, but I'm not able to do a conference call 3-way, the only option is 1 video and 1 audio (I disabled the Multisite option). It seems that VCS does not yet call the MCU in the game. Kindly help us with it. Can you tell us how you set up the Conference and how you have configured MCU and endpoints? From the sounds of it, you call each end point of one of the SX20s, but you must call simply directly in the Conference on the MCU. If you want to have a conference point to point between two end points and then degenerate into a multipoint conference on the MCU, you must configure Multiway. Vcs Tandberg and Cisco VCS control Hello I have a client with an old would invest video and new servers. Old video servers Control system Tandberg video Communication Server - part number = 117500 Application of Tandberg video Communication Server Expressway - part number = 1163402 New video servers: VCS License Control - Part Number - R-VMVCS-CTRL-K9 VCS Expressway License - Part Number - R-VMVCS-EXPWY-K9 According to Cisco x8.2 Clustering: -Each peer runs on a hardware platform with equivalent functionality; for example, you cannot cluster one Means that the physical old VCS cannot be grouped with new virtual VCS. Thank you. Hi zizou. You can include a device VCS with a VCS VM as long as their matches of software and their hardware platforms have equivalent capabilities. Device VCS clustered with VCS VM running on core 2 MediumVM = YES VCS machine clustered with VCS VM running on 8 cores LargeVM = No. "you can even cluster that are running on the standard devices with peers running on core 2 Medium VMs, but you can not group a peer running on a standard unit with peers running on base 8 large virtual machines. (p.4) Cisco VCS - C keeps filling in Purge on MSDS systems Hello I have a very weird question that is quite difficult to explain. We had a few failures of Fan on my Cisco VCS - C and we did a RMA number and received a new one. I installed this VCS in April this year. I start then notice every time we add a new system to their MSDS ID TMS is of the order of 2860. We have only 42 systems at this stage. Then I noticed when I'm in the systems tab Purge TMS keep my new Cisco VCS - C, populating the name of the system and the type of system, this product about 2800 times. Someone else experiencing something similar to this? I'll try to purge these systems, the only thing is that this happen, what can I do else do I completely purge my VCS of TMS and readd it? TMS system IDs are generated by TMS and increases when you add several systems. You might be able to change the ID of the SQL database, systems are stored in the dbo.objSystem table, but I do not recommend because the ID of the system could be used elsewhere and you can potentially break TMS and make things worse. Cisco VCS Expressway / Starter Pack = part number / Option key Hello I m a bit confused about ordering cisco information. My document: http://www.cisco.com/c/en/us/products/collateral/unified-communications/... -set up a new environment VCSE only for remote workers. -ensure the video service just over the internet for Jabber and SIP/h.323 conference systems -only the MCU as a peripheral local registerd to provide several conferences Our plan: VCSE: R VMVCS-EXPWY-K9 (comes with the Cisco telepresence video Communication Server(OVA file) Network Interface feature, characteristic of the motorway, gateway functionality, 1800 TURN relay Option, VCS-Dual) Options: LIC-VCSE-50, LIC-VCS-OCS Now the thing of Jabber: We want to connect on WAN Jabber clients. This is why the VCSE STRATER PACK has the nice feature of 50 video of Jabber Cisco TelePresence licenses with management in there. But if we get that the CTI-VCS-STPAK-K9 instead of the VCSEVM, we have a limitation of 50 records and 10 calls trasversal, right? Only then the VCSE is intresting (culture and systems to support), but we want the Jabber options on it without buying an MSD. Or do we buy the CTI-TMS-SW-K9 with LIC-MOVI-25 (the different today: LIC-JAB-MOB-25, LIC-TMS-EP-25) Thanks a lot for answering One of the first things I would consider on VCS Starter Pack is that it is almost end of sale, first of September 2014, so think of this forward. / EOS-EOL-Notice-C51 - 731300.html
Make use of crossing call instead of Non-traversal on Cisco VCS - C Hello I have a test of Cisco's VCS running non-traversal 20 and 100 license course. I need once I have start a session of Cisco's Jabber client to one of the cameras (Studios). I want the VCS to consume a license of traversal appeal? Is - this possibe? Hello If you enable interoperability and call Jabber on sip to H323 endpoint. <->SIP h323 will consume a crossing
Lisence. / Magnus Sent by Cisco Support technique iPhone App Cisco VCS and integration Lync2013 Hello! Could you tell me please, when CISCO officially support Lync2013 - free new software for VCS - C and documentation on integration? The main interest is the possibility of transferring video between CISCO/MCU and Lync endpoints on the H.264 Protocol, who hails from Lync2013. Right now, I've got VCS - C and RTM Lync2013 X7.2. During the video call without AMGW appeal established as audio only. When using with Lync2010, it worked on Protocol H.263 and CIF resolution. Evgeniy salvation, We are currently investigating the possibilities to achieve interoperability between Lync 2013, VCS and video devices on the side of the VCS standards-based, it is a work in progress and at this stage, it is to early to provide any factual information on when interop will be available. In contrast to Lync 2010, Lync 2013 does not support H.263 for video and it so that will remove the OCS/Lync integration. I do however think that you should be able to make a two-way video between Lync 2013 and VCS-joined endpoints if you use an AMGW tried that yet? Thank you Andreas Hi guys,. Are there any chance to get r6250 to support the vlan in update close? The specifications of this router is excellent, good speed - memory support for usb 3.0 everything is cool. But I miss a lot of support of vlan. My fiber optics connection request 10 for ppoe and vlan VLAN 20 for iptv. Already tried fw custom (like dd - wrt and tomato that adds vlan) but the performance is not good as the original (usb share and other things) and wifi speed is far away... BTW, the source code for the firmware is offline or not available. Please add support for vlan ASAP (r6250, v6300 v1 and v2) are missing. To date, group VLAN / bridge is now supported on the latest firmware of the R6250. Here is the link to the release notes. integration of lync 2013 with cisco vcs - c Hello Hi, David,. It would be preferable that you contacted Cisco re: integration https://supportforums.Cisco.com/thread/2181356 Or try to repost your question to the TechNet Forum Cisco VCS Lync Interworking with Lync Server/multiple domains Unfortunately I don't find any reference in the guides of deploymend, if it is possible to master several server/domains on a single VCSE lync. Is there a way to gather environments different lync with a vcs? For example, interoperability with clients a and b, which have completely separated from lync environments. We wanted to master it with VCSE, or is the Microsoft key option only avalible for VCS? Thanks for the reply. The Deployment Guide says you should use a VCS-control, not a VCS-Highway to serve as gateway of Lync. I don't think I have several B2BUAs connect to Lync on a single VCS - you would need to have a separate VCS for each Lync environment (IE, one for the customer) and another for client B and search rules appropriate to direct traffic areas in the right direction. Router Cisco 1941 - crypto isakmp policy command missing - IPSEC VPN Hi all I was looking around and I can't find the command 'crypto isakmp policy' on this router Cisco 1941. I wanted to just a regular Lan IPSEC to surprise and Lan installation tunnel, the command isn't here. Have I not IOS bad? I thought that a picture of K9 would do the trick. Any suggestions are appreciated That's what I get: Router (config) #crypto? SEE THE WORM Cisco IOS software, software C1900 (C1900-UNIVERSALK9-M), Version 15.0 (1) M2, VERSION of the SOFTWARE (fc2) ROM: System Bootstrap, Version 15.0 M6 (1r), RELEASE SOFTWARE (fc1) The availability of router is 52 minutes This product contains cryptographic features... Cisco CISCO1941/K9 (revision 1.0) with 487424K / 36864K bytes of memory. License info: License IDU: ------------------------------------------------- Technology for the Module package license information: "c1900". ---------------------------------------------------------------- Configuration register is 0 x 2102 You need get the license of security feature to configure the IPSec VPN. Currently, you have 'none' for the security feature: ---------------------------------------------------------------- Here is the information about the licenses on router 1900 series: 5.6.2 pages: Pages display side by side Hello Here's my question: how to display pages side by side, as it was a book? Thank you very much in advance for your help. Best wishes Silvia Impossible purchase mlb.tv season 2016 through the application on my appletv. I can't buy mlb.tv 2016 season or every month through the app on my apple tv. He's going round and round of success! You can now watch. Sorry you don't have access, please buy. I called help apple, they thought it was my apple tv. It is not the case. How can I erase card story in iOS 9.2.1? I have a list of recent, but there is no clear button. I tried to drag both ways and it does not delete. What happens in files on iCloud, which account no longer exists I recently changed my internet provider and changed my Apple user ID. I never used the cloud before. Now, when I got to my new user name all together towards the top, the opposition a Division kept popping up sometimes. So, I have backed up this erro Why my windows keep freezing? Why my windows keep freezing? It's funny because it started to happen after I replied to a few things about illuminati on youtube. But after that, it kept saying error post comment. So I disconnected my account and connected to another one of my accoSimilar Questions
I tried following solutions:
peer running on one core 2 average VM with peers running on base 8 large virtual machinesFirst what we want to do. Quick and short: LAN-MCU -/- DMZ-VCSE VM -/-
That share and option key is therefore the best choice?
CA Certification Authority
main activities key long-term
public key PKI components
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Updated Thursday, March 10, 10 22:27 by prod_rel_team
System returned to ROM by reload at 02:43:40 UTC Thursday, April 21, 2011
System image file is "flash0:c1900 - universalk9-mz.» Spa. 150 - 1.M2.bin.
Last reload type: normal charging
Reload last reason: reload command
Card processor ID FTX142281F4
2 gigabit Ethernet interfaces
2 interfaces Serial (sync/async)
Configuration of DRAM is 64 bits wide with disabled parity.
255K bytes of non-volatile configuration memory.
254464K bytes of system CompactFlash ATA 0 (read/write)
Device SN # PID
-------------------------------------------------
* 0 FTX142281F4 CISCO1941/K9
Technology-technology-package technology
Course Type next reboot
-----------------------------------------------------------------
IPBase ipbasek9 ipbasek9 Permanent
security, none none none
given none none none
Technology-technology-package technology
Course Type next reboot
-----------------------------------------------------------------
IPBase ipbasek9 ipbasek9 Permanent
security, none none none
given none none noneMaybe you are looking for