Cisco VCS - C keeps filling in Purge on MSDS systems

Similar Questions

• Windows Vista PC keeps filling the disk space

  Windows Vista PC keeps filling the disk space, but programs like Treesize and Windows Explorer are not all of the additional files.

  The disc has about 45 GB of files, but the 220 GB drive is almost full. I suspect that a program will create orphaned files. CHKDSK is currently suspended from the second pass. Will try to run until the end of the day to the next.

  I turned on the hidden files and protected, it is not that I can't see the files. What can account for 150 + GB of invisible disk space?  Indexing of Windows seems to be active, although the C drive was marked to not be indexed.

  I know that a temporary internet file (content.ie5) is doubly hidden. Who had only 50 MB in it, so it's not the culprit. Any other hidden super-fichiers that everyone knows.

  Running Trend Micro PC-Cillin. The history of this creation of orphaned files?

  All the tools that look right at the MFT to see what is using the disk space and the avoidance of the directory tree?

  This isn't a matter of a few directories being wholesale, or clean old files. The space used is not anywhere to be found.

  Already run cleaning ccleaner and disk. Empty temporary files, Recycle Bin, etc. Only restore point. Registry clean with ccleaner.

  Never did anything on computer that could use 150 GB of space.

  If you look at just the computer, you can see disappearing disk space (maybe 1 GB an hour).

  Always seems to happen if you disconnect from the internet.

  Friend PC, so I did not have immediate access to it.

  Whence the free number 'space '? I'm just that an orphan file will not be displayed in a search in directories or with Treesize, but will use up to 'free space '?

  No sign of a virus.

  Hello

  Were there any changes made on the computer before the show?

  I suggest to refer to the article and try to defragment the hard disk:

  Improve performance by defragmenting your hard drive

  I understand that you have already scanned the hard drive with anti-virus software, although I suggest you try to run an online scan and check if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Let us know if it helps.

• Drive hard keeps fills, using CC Cleaner & Deffrag for a few weeks now. I do go down, & then it fills again! Help, please.

  I'm running Vista 64, SP2 and my hard drive keeps filling.

  I used CC Cleaner and Deffrag program for a few weeks now.

  (just the CC Cleaner on its own takes me awhile because I don't want to delete everything I shouldn't)

  I have moved away from home to the office and checked to see if there are "too many connections (?)" just in case it's something in the process.  Honestly, I can't say if there are too many?

  I know that I don't want to lose the ability to remote into my office... so I leave them alone.

  I wanted to delete some 'hidden' files $Recycle... but am concerned that my operation files original files are mixed in the files?

  Is there a way to return to the top... few of the restoration copies?

  AND... How can I stop this from happening?  I spent hours trying to manage it.

  It comes down, then it fills again!

  Help, please.

  Hello MetisLight,

  Here is a link to another user having the same problem.  Have you tried to try the steps listed?  Please let us know status.

  Microsoft Answers:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/harddrive-filling-up/e9b60b0c-6b9d-4e12-85d9-9a875cc1aa8a

• disk hard drive keeps filling

  I got a new computer a few months back, and lately the hard drive has been fill up very quickly for no reason that I can see. I loaded a few games on and that's it, but it keeps fill in at a pace of about 5-10 GB per week. I tried ccleaner and that had no effect. It's a hard drive 1 TB and up to present its used 350 GB even if when I open the files on the c drive and highlight everything and go into propertys the total amount that I can see in there are about 74 GB.

  its an inspiron 3847 running windows 7 pro

  I have no idea what's going on so any help would be appreciated! Thank you

  Take a look at this. The article provides information on how to set the amount of space system restore uses.

• Restricting calls between a subarea and specific extensions on Cisco VCS

  Hello, I use Cisco VCS 8.5.3, my goal is to restrict calls between a subarea and specific extensions.
  I tried following solutions:

  1. Download of XML strategy
  2. Use of political appeal web interface in order to limit calls

  XML file:

  
   
   

  
   
     
     

  
     
     

  
     
     

  
       
     

  
     
   

  
  
  

  But when I apply the XML file, or try using the web simple rule (for example: 11111 12222 destination source, dismiss the action) I'm still able to place the call to 11111 to 12222.

  What can be the cause of the problem and what else can I try to be able to prohibit calls between a particular Subzone and exentions?

  Attached, is an example of CPL script that should work.  Using this script, CPL, I was able to block calls to a subarea set to a destination alias located in the subzone of default and was always able to call any other end point in the default subfield without problem.  Note that you must enter the name of the subarea, as you have configured on the VCS, including spaces if they exist.

  The scenario is based on the example of CPL "limiting access to a local gateway" X8.5 VCS Administrator's Guide on pg 413, other documents of CPL reference and examples can be seen starting on pg 410.

• Cisco VCS and MCU - Conference does not

  Dear community members

  I have problems in the VCS configuration to work with the MCU to join to several endpoints in a conference. The components that I use:

  -Cisco VCS control v8.7.

  -Cisco 5300 MCU 5310 v 4.5 (1.72)

  -3 x SX20 end points

  I recorded every endpoint and MCU on VCS, but I'm not able to do a conference call 3-way, the only option is 1 video and 1 audio (I disabled the Multisite option). It seems that VCS does not yet call the MCU in the game.

  Kindly help us with it.

  Can you tell us how you set up the Conference and how you have configured MCU and endpoints?

  From the sounds of it, you call each end point of one of the SX20s, but you must call simply directly in the Conference on the MCU.  If you want to have a conference point to point between two end points and then degenerate into a multipoint conference on the MCU, you must configure Multiway.

  With the help of Multiway with Cisco TelePresence systems

• Vcs Tandberg and Cisco VCS control

  Hello

  I have a client with an old would invest video and new servers.

  Old video servers

  Control system Tandberg video Communication Server - part number = 117500

  Application of Tandberg video Communication Server Expressway - part number = 1163402

  New video servers:

  VCS License Control - Part Number - R-VMVCS-CTRL-K9

  VCS Expressway License - Part Number - R-VMVCS-EXPWY-K9

  According to Cisco x8.2 Clustering:

  -Each peer runs on a hardware platform with equivalent functionality; for example, you cannot cluster one
  peer running on one core 2 average VM with peers running on base 8 large virtual machines

  Means that the physical old VCS cannot be grouped with new virtual VCS.

  Thank you.

  Hi zizou.

  You can include a device VCS with a VCS VM as long as their matches of software and their hardware platforms have equivalent capabilities.

  Device VCS clustered with VCS VM running on core 2 MediumVM = YES

  VCS machine clustered with VCS VM running on 8 cores LargeVM = No.

  "you can even cluster that are running on the standard devices with peers running on core 2 Medium VMs, but you can not group a peer running on a standard unit with peers running on base 8 large virtual machines.

  (p.4)

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/VCs/config_guide/x8-7/Cisco-VCs-cluster-creation-and-maintenance-deployment-guide-x8-7.PDF

• integration of lync 2013 with cisco vcs - c

  Hello

  I found a lot of documentation on integrating to Lync 2010 with VCS - C, but can't find much on the integration of Lync 2013.  Could someone shine some light on this for me?
  Thank you!

  Hi, David,.

  It would be preferable that you contacted Cisco re: integration

  https://supportforums.Cisco.com/thread/2181356

  Cisco PDF

  Or try to repost your question to the TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/ocsinterop/thread/319f9e94-f7ec-4c6e-994C-f5412e345e2e

• Cisco VCS and integration Lync2013

  Hello!

  Could you tell me please, when CISCO officially support Lync2013 - free new software for VCS - C and documentation on integration?

  The main interest is the possibility of transferring video between CISCO/MCU and Lync endpoints on the H.264 Protocol, who hails from Lync2013.

  Right now, I've got VCS - C and RTM Lync2013 X7.2. During the video call without AMGW appeal established as audio only.

  When using with Lync2010, it worked on Protocol H.263 and CIF resolution.

  Evgeniy salvation,

  We are currently investigating the possibilities to achieve interoperability between Lync 2013, VCS and video devices on the side of the VCS standards-based, it is a work in progress and at this stage, it is to early to provide any factual information on when interop will be available.

  In contrast to Lync 2010, Lync 2013 does not support H.263 for video and it so that will remove the OCS/Lync integration. I do however think that you should be able to make a two-way video between Lync 2013 and VCS-joined endpoints if you use an AMGW tried that yet?

  Thank you

  Andreas

• Cisco VCS - server certificate

  I get the warning "certificate unsecure: this cystem uses the default server certificate.". We recommend... "On my VCS' are

  1. is there something that I have to take into consideration related to endpoints or other VCS (this is a cluster) before you download a new certificate?

  2. communication between endpoints will affect?

  Hello

  If you are looking to get your certificates signed by yourself or a public certification authority I would first make sure that your servers have host names and configured DNS records. In addition, if you plan to use the edge of the collaboration (MRA) you should take a look at the additional without required for this:

  http://www.Cisco.com/c/dam/en/us/TD/docs/voice_ip_comm/Expressway/config...

  You shouldn't have issues with endpoints being affected, in my experience, the certificates have affected only edge of collaboration.

  Thank you, Simon

• History of calls Cisco VCS 7.0.2

  Hello

  I have a cluster of Cisco Telepresence Video Communication Server x7.0.2 and disappear every week we'll restart devices for maintenance but the call history when the devices is restarted.

  I'm trying to find this call history, but I couldn't find it.

  Do someone know where this call histroy is or is deleted as soon as the devices is restarted?

  I need the call history for statistics, as a Manager (or Unified Communication Manager) Call CDRs

  Thanks in advance.

  Best regards

  Hello

  You can try to access the VCS as root and go to/mnt/hardisk/logs and then search for journal of the 'messages' for the date that you are interested in. Open it with a text editor and try to filter out them on h225.setup and method = invite messages - these are your calls. There are also a lot of other messages.

  Best regards / / Andrey

• Make use of crossing call instead of Non-traversal on Cisco VCS - C

  Hello

  I have a test of Cisco's VCS running non-traversal 20 and 100 license course. I need once I have start a session of Cisco's Jabber client to one of the cameras (Studios). I want the VCS to consume a license of traversal appeal?

  Is - this possibe?

  Hello

  If you enable interoperability and call Jabber on sip to H323 endpoint. <->SIP h323 will consume a crossing

  Lisence.

  / Magnus

  Sent by Cisco Support technique iPhone App

• Cisco VCS does not show the user account option

  Hi team,

  We have 7.2 VCS server control, I'm not able to see the option of user account under maintenance-Login accounts. Please advise.

  We don't have find me and TMS provisioing Extension service license, don't you think that's the reason.

  I just started my first deployment of VCS, MCU and TMS and I must add customer movie, cisco Jabber video for Ipad and integrtaion with CUCM. CUCM has some end points of polycom and C40 and C60.

  You precious advice will give me comfort during this deployment.

  Irfan

  BR

  Hello

  It's probably because that VCS runs in TMS PE commissioning mode, in which FindMe is managed by the portal user in TMS, meaning there is no need to set up the maintenance > logins on the VCS.

  Edit: You added information that you do not have the keys option Device Provisioning and FindMe. Because user names relate directly to FindMe, the absence of an option key FindMe would explain also unable to see maintenance > login accounts > user accounts.

  -Andreas

• Cisco VCS Expressway / Starter Pack = part number / Option key

  Hello

  I m a bit confused about ordering cisco information. My document: http://www.cisco.com/c/en/us/products/collateral/unified-communications/...

  First what we want to do. Quick and short: LAN-MCU -/- DMZ-VCSE VM -/-

  -set up a new environment VCSE only for remote workers.

  -ensure the video service just over the internet for Jabber and SIP/h.323 conference systems

  -only the MCU as a peripheral local registerd to provide several conferences

  That share and option key is therefore the best choice?

  Our plan:

  VCSE:

  R VMVCS-EXPWY-K9 (comes with the Cisco telepresence video Communication Server(OVA file) Network Interface feature, characteristic of the motorway, gateway functionality, 1800 TURN relay Option, VCS-Dual)

  1. what inscriptions? There are 2500 built-in?
  2 what of interoperability feature for h.323/SIP? CAN´t find in the list options.

  Options:

  LIC-VCSE-50, LIC-VCS-OCS

  Now the thing of Jabber:

  We want to connect on WAN Jabber clients. This is why the VCSE STRATER PACK has the nice feature of 50 video of Jabber Cisco TelePresence licenses with management in there. But if we get that the CTI-VCS-STPAK-K9 instead of the VCSEVM, we have a limitation of 50 records and 10 calls trasversal, right? Only then the VCSE is intresting (culture and systems to support), but we want the Jabber options on it without buying an MSD.

  1 can we install the CTI-VCS-STPAK-K9 key as an option on the VCSEVM and Jabber use 50 records without losing other features of Highway?
  2 or is it possible to install the CTI-VCSE-SPUPG-K9 key as an option to enable Cisco Jabber 100 user on this VCSEVM?

  Or do we buy the CTI-TMS-SW-K9 with LIC-MOVI-25 (the different today: LIC-JAB-MOB-25, LIC-TMS-EP-25)

  Thanks a lot for answering

  One of the first things I would consider on VCS Starter Pack is that it is almost end of sale, first of September 2014, so think of this forward.

  / EOS-EOL-Notice-C51 - 731300.html

  • What these records? There are 2500 built-in?
    • A single VCS will support up to 2500 records out of the box with a valid key.
  • As for the functionality of H323/SIP Interworking?
    • Interoperability is supported out of the box as long as no separate option key not required.
  • Options: LIC-VCSE-50, LIC-VCS-OCS
    • LIC-VCS-OCS is necessary only if you plan to integrate with Microsoft OCS/Lync VCS, otherwise it is not necessary, especially for the video of Jabber.
  • Can we install the CTI-VCS-STPAK-K9 key as an option on the VCSEVM and Jabber use 50 records without losing other features of Highway?
    • The VCS Starter Pack is a separate server from the VCS control and highway.
  • Or is it possible to install the CTI-VCSE-SPUPG-K9 key as an option to enable Cisco Jabber 100 user on this VCSEVM?
    • It is possible to upgrade a VCS Starter Pack for VCS control or a highway, but you will lose the original pack starter call licenses and Jabber video optoins, like they are not transferable.  The licenses or options you have purchases on top of the basic starter pack will however is transferable.
  • Or do we buy the CTI-TMS-SW-K9 with LIC-MOVI-25 (the different today: LIC-JAB-MOB-25, LIC-TMS-EP-25)
    • If you buy the VCS Starter Pack, it will manage the delivery of Jabber video for you.  If you buy a highway of VCS, you can also buy MSD and install Extension of provisioning of TMS is free.  To use TMSPE, you will need provisioning option keys installed in TMS, the difference between the start-up option keys are simply the types of devices you can fund, all kind of do the same thing really, but for the video of Jabber, you want to ICA-MOVI-XX.

• OpenSSL with 'Cisco VCS Certificate Creation and use - deployment guide. "

  Hi team,

  To prevent users to log on with the VCS Highway, we want to use OpenSSL (version: 1.0.1p 9 julio 2015), but I am facing the following problem:

  1 - I can't implement the command "touch index.txt".

  2 - I can´t implement the command "openssl genrsa-aes256-out private/cakey.pem 4096"; and when I apply these commands I get "OpenSSL is not recognized.

  I did all the steps that says "VCS certificate creation and use Cisco".

  What could be the matter?

  Thanks for your advice.

  Kind regards

  Bill

  Already explained why touch does not, simply create the .txt through windows command file.