Cisco VPN Client to authenticate to Active Directory

Similar Questions

• Cisco VPN client v5 and integration Active Directory 2008

  Hi all

  I need to know if I can integrate Single Sign On for my Cisco VPN Client v.5 with my Active Directory which run on windows 2008

  THX in advance

  No, unfortunately, Single Sign On is only supported on Clientless SSL VPN (WebVPN), not on the IPSec VPN Client AnyConnect VPN Client.

• Client pix VPN how to authenticate with Active Directory

  Hi all, I've just set up my first Client VPN on a Cisco PIX. Everything works very well so that hitting the correct subnet and logon. However, I would like to see how I can get my connection of remote users with there active directory accounts. Right now I use the local connection for the pix for testing purposes. Sounds easy, but I'm missing something

  We use:

  Cisco Pix 515E version 6.3 (3)

  Thank you

  Dan

  Unfortunately the PIX 6.3.3 version does not support Active Directory authentication. V6.3.3 PIX only supports authentication to the server database, radius, and Ganymede local PIX.

  If you want to authenticate to active directory, it is support for PIX v7.x go.

  Here are the different types of authentication support for PIX v7.x leave for your reference:

  http://www.Cisco.com/en/us/docs/security/ASA/asa70/configuration/guide/AAA.html

  Hope that answers your question.

• MS RADIUS and Cisco VPN client

  We currently have with a Server Windows RAS and IAS authentication with PPTP to users.

  I want to move a hub (we have two not used) and the use of the Cisco VPN client with IPSEC 3005, also using the RADIUS (IAS) in Windows to authenticate against Active Directory.

  I have a config to work for the client and it performs authentication, but I'm afraid that you can't configure IAS to work with IPSEC, unless you configure the policy for

  "Unencrypted authentication (PAP, SPAP).

  on the Authentication tab

  and

  "No encryption".

  on the encryption tab.

  Are encrypted with IPSEC credentials to establish the tunnel of the Cisco VPN client?

  For RADIUS PAP authentication, the user name is clear and the password is encrypted with the RADIUS shared secret.

  To maximize security, you would use GANYMEDE + or IPSec transport mode and isolated VLAN. But for most of us, strong passwords and physical security prevents the RADIUS PAP to a significant weakness.

• Problems to connect via the Cisco VPN client IPSec of for RV180W small business router

  Hello

  I tried to configure my router Cisco of RV180W as a customer VPN IPSec, but have encountered a problem that I hope someone can help me with. "" I managed to do the work of configuration so that the Cisco's VPN IPSec client authenticates successfully with the XAUTH user, I put on the router, but during the negotiation, the client ends with the following, which appears several times on the router error message: ' Mar 20 Oct 19:41:53 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [34360] has no config mode.

  I've read around the internet and a number of people seem to say that the Cisco VPN Client is not compatible with the router, but the same thing happens to my iPhone VPN client.

  Is it possible that this can be implemented? Below, I have attached the full configuration files and the log files. Thank you much in advance.

  Router log file (I changed the IP addresses > respectively as well as references to MAC addresses)

  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: floating ports NAT - T with counterpart > [44074]
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] WARNING: notification to ignore INITIAL-CONTACT > [44074] because it is admitted only after the phase 1.
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT - D payload does not match for > [4500]
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT - D payload does not match for > [44074]
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: received unknown Vendor ID
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: received Vendor ID: CISCO-UNITY
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT detected: is located behind a device. NAT and alsoPeer is behind a NAT device
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: request sending Xauth for > [44074]
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: ISAKMP Security Association established for > [4500] -> [44074] with spi =>.
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: receives the type of the attribute 'ISAKMP_CFG_REPLY' of > [44074]
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: login successful for the user "myusername".
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: myusername XAuthUser connected from the IP >
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: sending of information Exchange: Notify payload [10381]
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: receives the type of the attribute 'ISAKMP_CFG_REQUEST' of > [44074]
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: ignored attribute 5
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: attribute ignored 28683
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no mode config
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: attribute ignored 28684
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no mode config
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: remove the invalid payload with doi:0.
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: purged-Association of ISAKMP security with proto_id = ISAKMP and spi =>.
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: myusername XAuthUser Logged Out of the IP >
  Mar 20 Oct 20:03:16 2015 (GMT + 0000): [r1] [IKE] INFO: ISAKMP Security Association deleted for > [4500] -> [44074] with spi =>

  The router configuration

  screen_shot_10-20 - 15_at_09.00_pm.png

  

  IKE policy

  screen_shot_10-20 - 15_at_09.00_pm_001.png

  

  screen_shot_10-20 - 15_at_09.01_pm.png

  

  VPN strategy

  screen_shot_10-20 - 15_at_09.02_pm.png

  

  screen_shot_10-20 - 15_at_09.02_pm_001.png

  

  Client configuration

  Hôte : < router="" ip=""> >

  Authentication group name: remote.com

  Password authentication of the Group: mysecretpassword

  Transport: Enable Transparent Tunneling; IPSec over UDP (NAT/PAT)

  Username: myusername

  Password: mypassword

  Please contact Cisco.

  Correct, the RV180 is not compatible with the Cisco VPN Client.  The Iphone uses the Cisco VPN Client.

  You can use the PPTP on the RV180 server to connect a PPTP Client.

  In addition, it RV180 will allow an IPsec connection to third-party customers 3.  Greenbow and Shrew Soft are 2 commonly used clients.

• How to create a VPN file .pcf for the CISCO VPN CLIENT software profile

  Dear all

  How to create a VPN file .pcf for the CISCO VPN CLIENT software profile

  Concerning

  Hi Imran,

  Can't do much about that because it depends on what authenticate you the VPN server and how the settings. But let me introduce you to the memory layout. Once you install and open a VPN client. Press it again and it opens up a new page for the VPN config.

  Example of configuration as it is attached. But it differs depending on the configuration of your vpn server.

  Once you create and save this profile. Your FCP file is stored.

  Please assess whether the information provided is useful.

  By

  Knockaert

• All necessary licenses on ASA 5510 for old Cisco VPN Client

  We're trying to migrate our firewall Watchguard to a Cisco ASA 5510, who bought some time ago. For some reason, all of our users have already installed the old Cisco VPN client. I think it will work. Are there licensing issues on the 5510 I had to be concerned with?  No matter what special config that needs to be done on the 5510?

  Fix. You don't require licensing of AnyConnect of any type of configuration and the use of IKEv1 IPsec remote access VPN (which use the old Cisco VPN client).

  You will be limited to 250 active IPsec peers (remote access more no matter what VPN site-to-site) by the platform (hardware) device capabilities that are enforced by the software.

• Cisco VPN Client behind PIX 515E,-&gt; VPN concentrator

  I'm trying to configure a client as follows:

  The user is running Cisco VPN Client 4.0. They are behind a 6.1 PIX 515E (4), and I need to connect to a VPN concentrator located outside of our network. We use PAT for address translation. As far as I know, to allow ipsec through Firewall 1 tunnel, I need to upgrade the pix to 6.3 and activate "fixup protocol esp-ike.

  Is there another way to do this? I am also curious to know how much more easy/better this will work if we were dealing with pptp.

  You don't necessarily need to fixup protocol esp-ike active. The remote Hub there encapsulation NAT - T enabled so that clients behind the NAT can run?

• Cisco VPN client 3.5.1 and Cisco ASA 5.2 (2)

  Hello

  I have a strange problem about Cisco VPN client (IPSec) with Cisco ASA. The Cisco ASA runs software version 5.2 (2). The Cisco VPN client version is 3.5.1.

  The problem is the customer able Cisco VPN to authenticate successfully with Cisco ASA, but could not PING to any LAN behind the Cisco ASA. In any case, the problem disappeared when we used the Cisco VPN version 4.6 or 4.8 of the customer. All parameters are exactly the same. What has happened? What is the cause of this problem? How can I solve this problem?

  Please advice.

  Thank you

  Nitass

  I understand your problem, I never used 3.5.1 so I thought that maybe nat - t is not enabled by default as 4.x.

• Cisco VPN Client is blocking incoming connections

  Hello

  I somethimes (not always) a problem with the Cisco VPN Client.

  As soon as the CISCO VPN Client is installed (it must not be running) it blocks inbound connections from the local network.

  The problem is that I use Ultra VNC SC to support some of my clients. Another client is supported by Cisco VPN. With UltraVNC SC customer clients try to connect to my PC.

  But if I installed the cisco VPN Client, no incoming connections are possible.

  How can I change this behavior?

  This behavior is not always the same. Last incoming connections of two months were possible, but from one day to another is not possible more.

  I recently installed the Client, but it takes no effect :-(

  I have NOT activated the firewall Cisco on the VPN Client and the behavior is NOT only if the Client is activated. This is the behavior even if it is NOT active and just installed.

  Hi Chris,

  Zone alarm is installed on the PC that is defective?

  Try to restart the Cisco VPN service and launch the vpn client.

  I remember having a similar problem with the Cisco VPN Client. Some conflict between the VPN client and Zone-Alarm, installed on the same PC.

  The problem was with VSDATANT variables in the registry key.

  Please see the following mail took from another forum:

  http://www.OutpostFirewall.com/Forum/showthread.php?t=9917

• Cisco VPN Client 5.0.0 does not connect

  Hello

  I am trying to establish the VPN session the firewall to 5525 X Cisco ASA crossing 9.1.1 Cisco VPN Client. Although AnyConnect is the way to go, the inherited method must always be supported for some time as part of a migration. I tried two VPN users (authenticated by ad) on two client computers running Windows 7 64 bit and Cisco VPN Client 5.0.07.0440. Both users are able to establish a session to a computer at the ASA, but not the other. Entering credentails evil, the login popup will appear immediately. On the combination of username/password correct name, the following VPN client log messages are generated and the session drops that is "not connected" in the status bar. The PCF file is the same on both client computers.

  Cisco Systems VPN Client Version 5.0.07.0440
  Copyright (C) 1998-2010 Cisco Systems, Inc. All Rights Reserved.
  Client Type(s): Windows, WinNT
  Running on: 6.1.7601 Service Pack 1
  119    22:49:16.933  06/23/13  Sev=Info/6          IKE/0x6300003B
  Attempting to establish a connection with 203.99.111.44.
  120    22:49:16.939  06/23/13  Sev=Info/4          IKE/0x63000001
  Starting IKE Phase 1 Negotiation
  121    22:49:16.942  06/23/13  Sev=Info/4          IKE/0x63000013
  SENDING >>> ISAKMP OAK AG (SA, KE, NON, ID, VID(Xauth), VID(dpd), VID(Frag), VID(Nat-T), VID(Unity)) to 203.99.111.44
  122    22:49:16.973  06/23/13  Sev=Info/5          IKE/0x6300002F
  Received ISAKMP packet: peer = 203.99.111.44
  123    22:49:16.973  06/23/13  Sev=Info/4          IKE/0x63000014
  RECEIVING <<< ISAKMP OAK AG (SA, KE, NON, ID, HASH, VID(Unity), VID(Xauth), VID(dpd), VID(Nat-T), NAT-D, NAT-D, VID(Frag), VID(?)) from 203.99.111.44
  124    22:49:16.974  06/23/13  Sev=Info/5          IKE/0x63000001
  Peer is a Cisco-Unity compliant peer
  125    22:49:16.974  06/23/13  Sev=Info/5          IKE/0x63000001
  Peer supports XAUTH
  126    22:49:16.974  06/23/13  Sev=Info/5          IKE/0x63000001
  Peer supports DPD
  127    22:49:16.974  06/23/13  Sev=Info/5          IKE/0x63000001
  Peer supports NAT-T
  128    22:49:16.974  06/23/13  Sev=Info/5          IKE/0x63000001
  Peer supports IKE fragmentation payloads
  129    22:49:16.977  06/23/13  Sev=Info/6          IKE/0x63000001
  IOS Vendor ID Contruction successful
  130    22:49:16.977  06/23/13  Sev=Info/4          IKE/0x63000013
  SENDING >>> ISAKMP OAK AG *(HASH, NOTIFY:STATUS_INITIAL_CONTACT, NAT-D, NAT-D, VID(?), VID(Unity)) to 203.99.111.44
  131    22:49:16.977  06/23/13  Sev=Info/6          IKE/0x63000055
  Sent a keepalive on the IPSec SA
  132    22:49:16.977  06/23/13  Sev=Info/4          IKE/0x63000083
  IKE Port in use - Local Port =  0xCA7C, Remote Port = 0x1194
  133    22:49:16.977  06/23/13  Sev=Info/5          IKE/0x63000072
  Automatic NAT Detection Status:
  Remote end is NOT behind a NAT device
  This   end IS behind a NAT device
  134    22:49:17.000  06/23/13  Sev=Info/5          IKE/0x6300002F
  Received ISAKMP packet: peer = 203.99.111.44
  135    22:49:17.000  06/23/13  Sev=Info/4          IKE/0x63000014
  RECEIVING <<< ISAKMP OAK TRANS *(HASH, ATTR) from 203.99.111.44
  136    22:49:17.211  06/23/13  Sev=Info/4          IPSEC/0x63700008
  IPSec driver successfully started
  137    22:49:17.211  06/23/13  Sev=Info/4          IPSEC/0x63700014
  Deleted all keys
  138    22:49:23.207  06/23/13  Sev=Info/4          IKE/0x63000013
  SENDING >>> ISAKMP OAK TRANS *(HASH, ATTR) to 203.99.111.44
  139    22:49:23.393  06/23/13  Sev=Info/5          IKE/0x6300002F
  Received ISAKMP packet: peer = 203.99.111.44
  140    22:49:23.393  06/23/13  Sev=Info/4          IKE/0x63000014
  RECEIVING <<< ISAKMP OAK TRANS *(HASH, ATTR) from 203.99.111.44
  141    22:49:23.393  06/23/13  Sev=Info/4          IKE/0x63000013
  SENDING >>> ISAKMP OAK TRANS *(HASH, ATTR) to 203.99.111.44
  142    22:49:23.401  06/23/13  Sev=Info/5          IKE/0x6300005E
  Client sending a firewall request to concentrator
  143    22:49:23.401  06/23/13  Sev=Info/4          IKE/0x63000013
  SENDING >>> ISAKMP OAK TRANS *(HASH, ATTR) to 203.99.111.44
  144    22:49:23.427  06/23/13  Sev=Info/5          IKE/0x6300002F
  Received ISAKMP packet: peer = 203.99.111.44
  145    22:49:23.427  06/23/13  Sev=Info/4          IKE/0x63000014
  RECEIVING <<< ISAKMP OAK TRANS *(HASH, ATTR) from 203.99.111.44
  146    22:49:23.427  06/23/13  Sev=Info/5          IKE/0x63000010
  MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_ADDRESS: , value = 10.2.193.69
  147    22:49:23.427  06/23/13  Sev=Info/5          IKE/0x63000010
  MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS(1): , value = 10.2.5.2
  148    22:49:23.428  06/23/13  Sev=Info/5          IKE/0x63000010
  MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS(2): , value = 10.1.5.2
  149    22:49:23.428  06/23/13  Sev=Info/5          IKE/0x6300000D
  MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SAVEPWD: , value = 0x00000000
  150    22:49:23.428  06/23/13  Sev=Info/5          IKE/0x6300000D
  MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SPLIT_INCLUDE (# of split_nets), value = 0x00000001
  151    22:49:23.428  06/23/13  Sev=Info/5          IKE/0x6300000F
  SPLIT_NET #1
  subnet = 10.0.0.0
  mask = 255.0.0.0
  protocol = 0
  src port = 0
  dest port=0
  152    22:49:23.428  06/23/13  Sev=Info/5          IKE/0x6300000E
  MODE_CFG_REPLY: Attribute = MODECFG_UNITY_DEFDOMAIN: , value = example.org
  153    22:49:23.428  06/23/13  Sev=Info/5          IKE/0x6300000D
  MODE_CFG_REPLY: Attribute = MODECFG_UNITY_PFS: , value = 0x00000000
  154    22:49:23.428  06/23/13  Sev=Info/5          IKE/0x6300000E
  MODE_CFG_REPLY: Attribute = APPLICATION_VERSION, value = Cisco Systems, Inc ASA5525 Version 9.1(1) built by builders on Wed 28-Nov-12 11:15 PST
  155    22:49:23.428  06/23/13  Sev=Info/5          IKE/0x6300000D
  MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SMARTCARD_REMOVAL_DISCONNECT: , value = 0x00000001
  156    22:49:23.428  06/23/13  Sev=Info/5          IKE/0x6300000D
  MODE_CFG_REPLY: Attribute = Received and using NAT-T port number , value = 0x00001194
  157    22:49:23.445  06/23/13  Sev=Info/4          IKE/0x63000056
  Received a key request from Driver: Local IP = 10.2.193.69, GW IP = 203.99.111.44, Remote IP = 0.0.0.0
  158    22:49:23.445  06/23/13  Sev=Info/4          IKE/0x63000013
  SENDING >>> ISAKMP OAK QM *(HASH, SA, NON, ID, ID) to 203.99.111.44
  159    22:49:23.477  06/23/13  Sev=Info/5          IKE/0x6300002F
  Received ISAKMP packet: peer = 203.99.111.44
  160    22:49:23.477  06/23/13  Sev=Info/4          IKE/0x63000014
  RECEIVING <<< ISAKMP OAK INFO *(HASH, NOTIFY:STATUS_RESP_LIFETIME) from 203.99.111.44
  161    22:49:23.477  06/23/13  Sev=Info/5          IKE/0x63000045
  RESPONDER-LIFETIME notify has value of 86400 seconds
  162    22:49:23.477  06/23/13  Sev=Info/5          IKE/0x63000047
  This SA has already been alive for 7 seconds, setting expiry to 86393 seconds from now
  163    22:49:23.477  06/23/13  Sev=Info/5          IKE/0x6300002F
  Received ISAKMP packet: peer = 203.99.111.44
  164    22:49:23.477  06/23/13  Sev=Info/4          IKE/0x63000014
  RECEIVING <<< ISAKMP OAK INFO *(HASH, NOTIFY:NO_PROPOSAL_CHOSEN) from 203.99.111.44
  165    22:49:23.478  06/23/13  Sev=Info/4          IKE/0x63000013
  SENDING >>> ISAKMP OAK INFO *(HASH, DEL) to 203.99.111.44
  166    22:49:23.478  06/23/13  Sev=Info/4          IKE/0x63000049
  Discarding IPsec SA negotiation, MsgID=F3E3C530
  167    22:49:23.478  06/23/13  Sev=Info/4          IKE/0x63000017
  Marking IKE SA for deletion  (I_Cookie=CD65262E1C3808E4 R_Cookie=912AE160ADADEE65) reason = DEL_REASON_IKE_NEG_FAILED
  168    22:49:23.478  06/23/13  Sev=Info/5          IKE/0x6300002F
  Received ISAKMP packet: peer = 203.99.111.44
  169    22:49:23.479  06/23/13  Sev=Info/4          IKE/0x63000058
  Received an ISAKMP message for a non-active SA, I_Cookie=CD65262E1C3808E4 R_Cookie=912AE160ADADEE65
  170    22:49:23.479  06/23/13  Sev=Info/4          IKE/0x63000014
  RECEIVING <<< ISAKMP OAK INFO *(Dropped) from 203.99.111.44
  171    22:49:24.310  06/23/13  Sev=Info/4          IPSEC/0x63700014
  Deleted all keys
  172    22:49:26.838  06/23/13  Sev=Info/4          IKE/0x6300004B
  Discarding IKE SA negotiation (I_Cookie=CD65262E1C3808E4 R_Cookie=912AE160ADADEE65) reason = DEL_REASON_IKE_NEG_FAILED
  173    22:49:26.849  06/23/13  Sev=Info/4          IKE/0x63000001
  IKE received signal to terminate VPN connection
  174    22:49:26.855  06/23/13  Sev=Info/4          IPSEC/0x63700014
  Deleted all keys
  175    22:49:26.855  06/23/13  Sev=Info/4          IPSEC/0x63700014
  Deleted all keys
  176    22:49:26.855  06/23/13  Sev=Info/4          IPSEC/0x63700014
  Deleted all keys
  177    22:49:26.855  06/23/13  Sev=Info/4          IPSEC/0x6370000A
  IPSec driver successfully stopped
  

  Any ideas why the second client of Windows 7 does not work?

  Kind regards

  Rick.

  Rick

  Thanks for the additional output. It shows the xauth authentication step, which is good to see. But it does not offer much clarity on what is causing the problem.

  My attention is drawn to a couple of message on the balls that are in line with the two sessions for which you posted newspapers.

  32 00:36:08.178 24/06/13 Sev = Info/5 IKE/0x6300005E

  Customer address a request from firewall to hub

  I'm not sure that we see any answer to this, but it makes me wonder if it is somehow involved in the issue. Is it possible that there is a difference in the configuration of firewall and operating between two clients?

  I am also interested in this series of posts

  48 00:36:08.210 24/06/13 Sev = Info/4 IKE / 0 x 63000056

  Received a request from key driver: local IP = 10.2.193.69, GW IP = 203.99.111.44, Remote IP = 0.0.0.0

  I don't know why the pilot requested a key at this point, and I wonder why the remote IP is 0.0.0.0?

  It is followed by a package in which the ASA provides the value of the life of SA - which seems to be on the path to a successful connection. that is followed by

  55 00:36:08.350 24/06/13 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = 203.99.111.44

  56 00:36:08.350 24/06/13 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:no_proposal_chosen)="" from="">

  during which the SAA indicates that no proposal has been selected. It seems therefore that the ASA is not happy about something.

  If we do not find indications of the client that allows to identify the problem, then maybe we look at the ASA. Are all log messages generated on the SAA during this attempt to establish VPN that could show us the problem? Would it not be possible to run debugs on the SAA in a trial of this machine?

  HTH

  Rick

• Cisco VPN Client causes a blue screen crash on Windows XP Pro (Satellite M30)

  Hello

  I have a Satellite Pro M30 running Windows XP Professional.

  After you start a vpn Tunnel via a customer of Cisco VPN (Version 4.6 and 4.7), the system crashes with a blue screen.

  I see that the key exchange is successful, but immediately after the vpn connection is established Windows XP crashes with a blue screen.

  Someone has any idea how to solve this problem?

  Perhaps by the updated device driver? And if so, which driver should be updated?

  Kind regards

  Thorsten

  Hello

  Well, it seems that the Cisco client is a problem.
  I m unaware of this product because it of not designed by Toshiba.
  I think that the drivers are not compatible with the Windows operating system.
  However, I found this site troubleshooting cisco vpn client:
  Please check this:
  http://www.CITES.uiuc.edu/wireless/trouble-index.html

• Receive message "Validation of C:\WINDOWS\System32\VSINIT.dll failure" error message when trying to run Cisco VPN Client.

  windows\system32\vsinit.dll

  I try to run CISCO "VPN Client" connect from my PC at home for my work PC.

  Then, I get a message:

  Validation failed for C:\WINDOWS\System32\VSINIT.dll

  Any ideas?

  Martin

  Hello

  Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

  Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)

  If the steps above is not enough of it please post your request in the TechNet forum for assistance: http://social.technet.microsoft.com/Forums/en/category/windowsxpitpro

• Professional Windows Vista crashes when you use Cisco VPN Client 5.05.0290

  I have a Dell Latitude E6400 Windows Vista Business (32 bit) operating system. When I go to turn on the VPN client, I get invited to my username / password and once entered, the system just hangs. The only way to answer, it's a re-start. I took action:

  1 disabled UAC in Windows
  2 tried an earlier version of the VPN client
  3. by the representative of Cisco, I put the application runs as an administrator

  If there are any suggestions or similar stories, I would be grateful any offereings.

  It IS the COMODO Firewall with the 5.0.x CISCO VPN client that causes the gel. The last update of COMODO has caused some incompatibility. I tried to install COMODO without the built in Zonealerm, but it is still frozen. The only way to solve it is to uninstall COMODOD. Since then, my CISCO VPN client works again...

• Cisco vpn client minimized in the taskbar and the rest in status: disconnect

  I used 5.0.07.0240 cisco vpn client for 1 month with my pc under windows 7-64 bit. Worked well for 1 month. All of a sudden now when I double click the icon to start, VPN automatically minimizes to the taskbar with the disconnected state. It does not connect the option to hit or anything before it reduced to a minimum. I've not seen this before and no changes... but now it simply doesn't work. All solutions? Windows just patch automatically breaking cisco?
  Unfortunately, cisco does not world class technical service... they called but no use.

  In my view, there is now a published version of the x 64 client, you need to download.
  If you suspect an update of Windows, why not try a system restore for a day, it was
  working correctly?
   
  On Wednesday, April 28, 2010 17:27:46 + 0000, akshay2112 wrote:
   
  > I used 5.0.07.0240 cisco vpn client for 1 month with my pc under windows 7-64 bit. Worked well for 1 month. All of a sudden now when I double click the icon to start, VPN automatically minimizes to the taskbar with the disconnected state. It does not connect the option to hit or anything before it reduced to a minimum. I've not seen this before and no changes... but now it simply doesn't work. All solutions? Windows just patch automatically breaking cisco? Unfortunately, cisco does not world class technical service... they called but no use.
   

  Barb Bowman www.digitalmediaphile.com