Cisco VPN problems after installing the 506e

Similar Questions

• Problem after installing the driver VGA for HP Pavilion 1212TX g4

  Hello. I just bought a new HP Pavilion 1212TX g4.

  I install Win7 Ultimate Pro in it and no problems found. But after I installed the VGA driver (ATI Catalyst) the problem occurs.

  The error occurring on the screen is something like this: Access Violation (0xc0000005).

  Cannot run multiple applications installed once the error occurs (for example: iTunes, Nokia Suite, Adobe Reader).

  I am looking for the AC VGA driver for HP Pavilion 1212TX g4 but the problem still occurs.

  Please someone help me. I can't use my new laptop

  Thanks in advance

  Herry

  If you have installed the drivers from various sources I start over with a clean install of Windows 7 at this point and use the specific drivers for your model >& drivers starting first with Chipset and AMD graphics card, driver Intel Rapid Storage Technology and all other cases.

• Satellite P100 - display problem after installing the Samsumg software

  Hello

  I have a Toshiba P100-PSPA3 and just bought a new external monitor Sincmaster from Samsung. I installed it yesterday and everything works fine, I just plug in and the laptop recognizes it as a second monitor. Then I noticed the monitor comes with a CD and they recommend you to install the components of this CD.

  I installed the driver and still works fine but then I installed a software called * Magic money *, it is said that I should make a new start, I did and the image comes in the second monitor, * my laptop screen is black.*
  Then I begin to try all the possible solution I had in my head. I open this Magic Tune, and he says that it s not compatible with my computer, so I uninstall it. I have downloaded the drivers from Nvidia, Toshiba, installed again and again doesn´t work.

  I prove with the nvidia settings and the West without change. NVIDIA doesn´t recognize my laptop as a monitor, screen it recognizes just the Samsumg Sincmaster.

  I looked for people with the same problem in other forums and a possible solution was to turn off the computer, remove the battery and press the power for a few seconds, trying to carry out the computer. I did and it didn t work.

  Someone here could give me a light? I m totally lost now and I have to work with my computer in the next few days!
  Thank you very much
  Ivan

  Hello

  This software is not known to me and it is important to say that notebook manufacturers may not support some third part software.

  I put t know if this software must be preinstalled but I'm sure you can use your external display without it. When the external display is connected, you can switch between the LCD and external monitor by using the FN + F5 key combination. If you want to extend the display outside a use Windows display settings. It should work. I tested several laptop Toshiba with a few different monitors in my office and I n t noticed no problem.

  Have you already solved your problem or you are still looking for the solution?

• Problem after installing the new drive on Pavillion G6-2320

  The original hard drive on my old book of 8 Windows Pavillion G6-2320 3 months crashed and I sent to HP and got the replacement of the hard drive (laptop still under warranty). They gave me support online printing that I just need to install it in the laptop and would not need the disc to install the operating system. (I had originally bought my own replacement hard drive and had error messages so chatted with online support who took care of the hard drive replacement confirmed that indeed one supplied with the laptop has been damaged)

  After you install the new hard drive and turn on the laptop, the following message appears on the black screen:

  Not found boot device

  Please install an operating system on your hard drive

  Hard drive (3FO)

  The F2 System Diagnostics).

  I went to F2 and test the hard drive. Everything was made. Help please!

  Thank you

  Hello:

  You will need to call HP support and ordering of a set of recovery disc for your model in order to install the operating system and the programs provided with your laptop.

  HP is not delivered replacement hard drives pre-configured with any software.

  They should also ship you the free of charge from the PC recovery discs is still under warranty.

• Problems after installing the second SATA drive in Windows 7

  I just install a second SATA hard drive in Windows 7. Currently, I use only a processor AMD Athlon X 2 4800 with 3 GB of RAM, Windows 7 64 - bit, installed on a 400 GB Samsung SATA drive and have two (a pioneer and a Liteon) DVD burners.

  System worked fine until I put in the new drive. Previously, I had hung as such discs: SATA1 was the existing 400Go drive, SATA2 and 3 were two DVD burners (don't ask me why, I have 2, will remove one of them, if that's the problem).

  Installed the new HARD in the SATA4 drive. Booted up, saw the new drive in the BIOS, but Windows does not see it until I went to disk management, a drive letter assigned and formatted etc. Also, I swapped the drive letters so I had all of the HARD drive (I have my 400 GB split into two readers via the partition) and C: D: E: F: and G:, DVD players.

  Started, began to transfer data from D: to the new E:, and Windows crashes. No message error, everything freezes. Need to reset, and then allow Windows to check for errors etc. Return to Windows, same case again. I swapped the SATA cables so that SATA1 and 2 are the HARD drives and SATA3 and 4 are DVD players. Reboot, same case.

  What I am doing wrong? Or what should I do? I don't even have to start the transfer of data I just let WIndows running for 2 minutes and it automatically hangs again.

  If someone could help me as soon as POSSIBLE please, it would be fantastic. Thank you!

  I've been in contact with the provider, and Yes, that will take it back for Exchange. They gave me some ideas to try first, I'm going to do tonight; They asked me to check if the HARD disk is running on series complete ATA (SATA) mode and to enable the DMA if he asks me to. Otherwise, they said, try the fail-safe mode. Don't know if any of them are currently enabled etc but will find tonight.

  All else fails, I take that back! Simply means a 3 hours trip to Melbourne to make...

  Thanks again guys for your help.

  Michael.

• Problems after installing the new disk in the Satellite M70 151

  I have a Satellite M70-151 the hard drive gave up and was unreadable, before that I was using with my desktop via a router, that it worked very well. I had no option but to install a new hard drive now in System Manager, I get of the yellow question marks against:
  Other features:
  ? Mass storage controller
  ? Network controller
  ? Modem PCI
  ? Video controller (VGA compatible)

  I searched and searched, but can not find the drivers for these 4 things

  I have sound but only weak, I don't have a WiFi Yes feature I tried to install the good (as advised by Toshiba) Lan Driver [link to driver | http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?ID=58122&OSID=10&drive rLanguage = 42 & selectedLanguage = 13 & driverCountry = 41 & selectedCountry = 8]

  When I try to install it says "the device may not be present or could have been ejected/disconnected from the system.
  Insert or reinsert now. "
  I know I am being thick but I was under the impression that the Lan has been integrated into the laptop? :_|

  I would be sincerely grateful for all of the advice of my peers. :)

  Stuart

  First of all, we should start with basic information;
  The M70-151 Sat belongs to the series of PSM71E that's why you should choose this issue of the European driver Toshiba page if you want to download the correct drivers.

  _You will need these drivers: _

  Mass storage controller I think it is a cardbus driver
  Controller - s network a LAN or WLan card computing. First, check which driver is already installed
  Modem PCI driver modem ;)
  Display video Controller (VGA compatible) driver

  Greetings

• IdeaPad 100 s-11IBY problems after installing the update of Windows 10 anniversary (aka version 1607)

  Yesterday, my 11IBY-100 s installed update 10 birthday Windows (aka Windows 10 Version 1607). Now, it has multiple problems and is unusable.

  1. the keyboard (Yes, the built-in keyboard) does not work. None of the keys (letters, numbers, 'actions' as BACKSPACE) work not at all. If I plug in a USB wireless keyboard, it works fine. So maybe there is a problem with the device driver for the built-in keyboard with the update of the anniversary. The keyboard works perfectly until Windows Update installed upgrading birthday.

  2. the trackpad is not working. If I plug in a USB wireless mouse, it works fine. So maybe there is a problem with the device driver for the trackpad with the update of the anniversary. The trackpad has worked very well until Windows Update installed upgrading birthday.

  3. the Kingston 32 GB microSD card plugged into the microSD port is not recognized by the file Explorer. If I plug the 32GB Kingston microSD card in a USB microSD card reader and plug the card reader into a USB port, microSD storage is recognized in the file Explorer, so the microSD itself is fine. So maybe there is a problem with the device driver for the port microSD with the update of the anniversary. The microSD port works great and the micro SD card has been recognized in the file Explorer until Windows Update installed upgrading birthday.

  4. There is no audio data, Windows now indicates that no audio hardware is installed. So maybe there is a problem with the device drivers for the builtin microphone and the built-in speaker with the update of the anniversary. They worked fine until Windows Update installed upgrading birthday.

  I tried to do a RESET, but unfortunately although the reset worked, it resets Windows 10 Version 1607 (aka anniversary update) not an earlier version of Windows 10 and I still have all the problems above. Far as I can see, the Windows settings now say there is no history of update and no previous version of Windows, so I can't use any method of recovery which is available on the PC itself to go to an earlier version of Windows.

  Please can someone advise how to reset my PC (and where I can get the 32-bit Windows 10 appropriate ISO file or other) Windows 10 Version 1511 (i.e. before the update of the anniversary)?

  Or, Alternatively, device drivers are valid for Windows 10 Version 1607 for builtin keyboard, trackpad, port, microSD, microphone and speaker available somewhere? I can't see on the Lenovo Web site.

  Ron

  On the Lenovo site, in "Drivers and software" for this unit, there was a "Chipset" called driver «Intel platform driver for Windows 10 (32 bit) - Ideapad 100 s-11IBY» I downloaded and installed, then after being invited, rebooted the device. I am pleased to announce that

  the keyboard now works

  (b) the trackpad works now

  (c) the microSD card is now recognized by the file Explorer

  (d) the audio now works

  Ron

• I can't sync my iPhone 4S with my Macbook Pro more. It became a problem after installing the latest update.

  A couple of weeks ago, I upgraded my iPhone version 9.2 and iTunes on my Macbook Pro version 11.4, and now I can't get my iPhone to sync with my Macbook Pro. Whenever I connect the two devices, I get an error message that says: "the 'IPhone of John' iPhone cannot be used because it requires a newer version of iTunes. Go to www.itunes.com to download the latest version of iTunes. "

  I tried a lot of things, starting with resets hard and finally erase all data and settings of my phone, but without success. I would use an iTunes backup, but he refuses to communicate with my iPhone.

  Is anyone familiar with this problem? Thanks for your time.

  You you make sure that you run version 12.x iTunes on your Mac? If your OS x cannot run iTunes 12, you cannot synchronize your phone more set to update to iOS 9.x

• memory problems after installing the network card passthrough.

  First of all, Thanks for the help.
  I installed a network card passthrough directly to a Windows machine on ESXi 5.1 and start the machine when I get the error:
  
  Group VM.6791: invalid parameters for VM memory allocation vmm0: XXX. () min: 3670016, max:-1, minLimit:-1 actions:-1 units: pages)
  Group VM.6791: cannot Admit VM: memory admission check failed. Asked booking: 3716761 pages
  SharedArea: Unable to find 'testSharedAreaPtr' in SHARED_PER_VM_VMX domain.
  
  I looked at articles and don't see that only the value parameters Backup of the RAM, but If I change these settings, I get the following error:
  
  Not valid parameter memory: memory reservation (sched.mem.min) must be equal to memsize () 14336) .
  
  Thanks for the help.

  What is the memory you have allocated for this machine?

  Can you increase the amount of memory reserved for this virtual machine to its configured memory size and try to turn it?

• problems after installing the latest version of Camera Raw

  Hello

  After Camera Raw update (now I n 8.4.0.199 version), I no longer see the command:

  ("Open in Camera Raw Image" in the right-click inside the bridge controls)

  Also, when I use Camera Raw in Photoshop, I do see the effects in Bridge

  can you help me please?

  Thank you

  Replace the existing plugin of camera for photoshop cs6 with the one you can download from the link above

  Once you might have to purge the cache for all folders you displayed with the old camera raw plugin.

• Problems after installing the new hard drive

  It has just been put again hard drive and I already made a backup to, it doesn't seem to be
  microsoft ripheriques of work .no I also did get back on two front disc

  * original title - it was just put the new hard drive *.

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• I have a problem after installing, I try to open applications, but I get an error message: "it is impossible to open it properly (0 x 0000022) application, click ok to close the application" anyone of you could help me? I paid the monthly fee

  I have a problem after installing, I try to open applications, but I get an error message: "it is impossible to open it properly (0 x 0000022) application, click ok to close the application" anyone of you could help me? I paid the monthly rate but I can not use any application due to this error

  Hello

  This link may help: the application failed to start properly (0xc0000022).-Microsoft Community

  Kind regards

  Sheena

• Cisco VPN problem with security update KB3057839 for Vista

  Someone had problems with any connection Cisco VPN works after the installation of update of security KB3057839 for Vista? When this update is installed, the pop-up to enter the password and user id not come, need to use the Task Manager to close the program. The first time I went back to the restore point to get my VPN to work, this time I tried to reinstall the VPN but that doesn't work anymore. I started to uninstall updates (had 7 of them), when I got to it, KB3057839, the VPN began working again.

  Mike

  See this on the real issue:

  http://www.chiark.greenend.org.uk/~sgtatham/PuTTY/wishlist/Vista-update-breaks-config.html

  It turns out that the logon dialog box is invisible, but still, it agrees to enter you your password and LOG you!

• [SOLVED] Native Iphone4s Cisco VPN client cannot establish the tunnel (victory clients do)

  Hello

  IPhone 4 s last IOS5 V 5.1.1 installed

  I'm not able to make the native IPSEC VPN connection upset my company Cisco 877

  Instead, all my computer laptop and netbook with Cisco VPN Client work installed fine when they connect remotely to society 877

  Turn debugging 877, it seems Iphone successfully passes the 1 connection ike (actually Iphone wonder phase2 user/pass), but it hung to phase2 give me the error 'Negotiation with the VPN server has no' back

  An idea or a known issue on this?

  This is how I configured my VPN 877 part:

  R1 (config) # aaa new-model

  R1 (config) # aaa authentication default local connection

  R1 (config) # aaa authentication login vpn_xauth_ml_1 local

  R1 (config) # aaa authentication login local sslvpn

  R1 (config) # aaa authorization network vpn_group_ml_1 local

  R1 (config) # aaa - the id of the joint session

  Crypto isakmp policy of R1 (config) # 1

  R1(config-ISAKMP) # BA 3des

  # Preshared authentication R1(config-ISAKMP)

  Group R1(config-ISAKMP) # 2

  R1(config-ISAKMP) #.

  R1(config-ISAKMP) #crypto isakmp policy 2

  R1(config-ISAKMP) # BA 3des

  Md5 hash of R1(config-ISAKMP) #.

  # Preshared authentication R1(config-ISAKMP)

  Group R1(config-ISAKMP) # 2

  Output R1(config-ISAKMP) #.

  R1 (config) # CUSTOMER - VPN crypto isakmp client configuration group

  R1(config-ISAKMP-Group) # key xxxxxxxx

  R1(config-ISAKMP-Group) # 192.168.0.1 dns

  R1(config-ISAKMP-Group) # VPN - pool

  ACL R1(config-ISAKMP-Group) # 120

  R1(config-ISAKMP-Group) max-users # 5

  Output R1(config-ISAKMP-Group) #.

  R1 (config) # ip local pool VPN-pool 192.168.0.20 192.168.0.25

  R1 (config) # crypto ipsec transform-set encrypt-method-1 esp-3des esp-sha-hmac

  R1 (config) # crypto ipsec VPN-profile-1 profile

  R1(IPSec-Profile) # set the transform-set encrypt method 1

  Tunnel type interface virtual-Template2 R1 (config) #.

  R1(Config-if) # ip unnumbered FastEthernet0/0

  R1(Config-if) # tunnel mode ipsec ipv4

  Ipsec protection tunnel R1(Config-if) # VPN - profile - 1 profile

  Profile of R1 (config) # isakmp crypto vpn-ike-profile-1

  R1(conf-ISA-Prof) # match group identity CUSTOMER VPN

  R1(conf-ISA-Prof) # vpn_xauth_ml_1 list client authentication

  R1(conf-ISA-Prof) # isakmp authorization list vpn_group_ml_1

  R1(conf-ISA-Prof) # client configuration address respond

  R1(conf-ISA-Prof) virtual-model # 2

  Then run AccessList 120 for desired traffic ("access-list 120 now allows ip any any")

  I have configured my VPN Cisco "CUSTOMER-VPN" clients and relative password

  Whenever they connect, they are prompted for the password and username phase2 then they join the VPN with an IP address from local subnet released.

  With the same parameters required and confirmed in section ipsec VPN Iphone it does not work.

  It's 877 isakmp debug output after that Iphone wonder name of user and password (then I suppose that phase 1 completed):

  * 14:29:30.731 May 19: ISAKMP (0:2081): received 151.38.197.143 packet 500 Global 500 (R) sport dport CONF_XAUTH

  * 14:29:30.735 May 19: ISAKMP: (2081): responsible for operation of 151.38.197.143 of treatment. Message ID =-1427983983

  * 14:29:30.735 May 19: ISAKMP: Config payload RESPONSE

  * 14:29:30.735 May 19: ISAKMP/xauth: response XAUTH_USER_NAME_V2 attribute

  * 14:29:30.735 May 19: ISAKMP/xauth: response XAUTH_USER_PASSWORD_V2 attribute

  * 14:29:30.735 May 19: ISAKMP: (2081): node-1427983983 error suppression FALSE reason "made with Exchange of request/response xauth.

  * 14:29:30.735 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_PEER, IKE_CFG_REPLY

  * 14:29:30.735 May 19: ISAKMP: (2081): former State = new State IKE_XAUTH_REQ_SENT = IKE_XAUTH_AAA_CONT_LOGIN_AWAIT

  * 14:29:30.743 May 19: ISAKMP: node set 1322685842 to CONF_XAUTH

  * 19 May 14:29:30.747: ISAKMP: (2081): launch peer 151.38.197.143 config. ID = 1322685842

  * 19 May 14:29:30.747: ISAKMP: (2081): lot of 151.38.197.143 sending my_port 500 peer_port 500 (R) CONF_XAUTH

  * 14:29:30.747 May 19: ISAKMP: (2081): sending a packet IPv4 IKE.

  * 14:29:30.747 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_AAA, IKE_AAA_CONT_LOGIN

  * 14:29:30.747 May 19: ISAKMP: (2081): former State = new State IKE_XAUTH_AAA_CONT_LOGIN_AWAIT = IKE_XAUTH_SET_SENT

  * 14:29:31.299 May 19: ISAKMP (0:2081): received 151.38.197.143 packet 500 Global 500 (R) sport dport CONF_XAUTH

  * 14:29:31.299 May 19: ISAKMP: (2081): responsible for operation of 151.38.197.143 of treatment. Message ID = 1322685842

  * 14:29:31.299 May 19: ISAKMP: Config payload ACK

  * 19 May 14:29:31.303: ISAKMP: (2081): XAUTH ACK processed

  * 14:29:31.303 May 19: ISAKMP: (2081): error suppression node 1322685842 FALSE basis "Mode of Transaction.

  * 14:29:31.303 May 19: ISAKMP: (2081): talking to a customer of the unit

  * 14:29:31.303 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_PEER, IKE_CFG_ACK

  * 14:29:31.303 May 19: ISAKMP: (2081): former State = new State IKE_XAUTH_SET_SENT = IKE_P1_COMPLETE

  * 14:29:31.303 May 19: ISAKMP: (2081): entry = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE

  * 14:29:31.303 May 19: ISAKMP: (2081): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE

  * 19 May 14:29:31.303: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)

  * 14:29:31.315 May 19: ISAKMP: (2081): entry = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE

  * 14:29:31.315 May 19: ISAKMP: (2081): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE

  * 14:29:31.623 may 19: ISAKMP (0:2081): received 151.38.197.143 packet 500 Global 500 (R) sport dport QM_IDLE

  * 14:29:31.623 may 19: ISAKMP: node set-851463821 to QM_IDLE

  * 14:29:31.623 may 19: ISAKMP: (2081): responsible for operation of 151.38.197.143 of treatment. Message ID =-851463821

  * 14:29:31.623 may 19: ISAKMP: Config payload REQUEST

  * 14:29:31.623 may 19: ISAKMP: (2081): verification of claim:

  * 14:29:31.623 may 19: ISAKMP: IP4_ADDRESS

  * 14:29:31.623 may 19: ISAKMP: IP4_NETMASK

  * 14:29:31.623 may 19: ISAKMP: IP4_DNS

  * 14:29:31.623 may 19: ISAKMP: IP4_NBNS

  * 14:29:31.623 may 19: ISAKMP: ADDRESS_EXPIRY

  * 14:29:31.623 may 19: ISAKMP: APPLICATION_VERSION

  * 14:29:31.623 may 19: ISAKMP: MODECFG_BANNER

  * 14:29:31.623 may 19: ISAKMP: domaine_par_defaut

  * 14:29:31.623 may 19: ISAKMP: SPLIT_DNS

  * 14:29:31.623 may 19: ISAKMP: SPLIT_INCLUDE

  * 14:29:31.623 may 19: ISAKMP: INCLUDE_LOCAL_LAN

  * 14:29:31.623 may 19: ISAKMP: PFS

  * 14:29:31.623 may 19: ISAKMP: MODECFG_SAVEPWD

  * 14:29:31.623 may 19: ISAKMP: FW_RECORD

  * 14:29:31.623 may 19: ISAKMP: serveur_sauvegarde

  * 14:29:31.623 may 19: ISAKMP: MODECFG_BROWSER_PROXY

  * 14:29:31.627 May 19: ISAKMP/author: author asks for CUSTOMER-VPNsuccessfully group AAA

  * 14:29:31.627 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_PEER, IKE_CFG_REQUEST

  * 14:29:31.627 May 19: ISAKMP: (2081): former State = new State IKE_P1_COMPLETE = IKE_CONFIG_AUTHOR_AAA_AWAIT

  * 14:29:31.627 May 19: ISAKMP: (2081): attributes sent in the message:

  * 19 May 14:29:31.627: address: 0.2.0.0

  * 19 May 14:29:31.627: ISAKMP: (2081):address of 192.168.0.21 assignment

  * 14:29:31.627 May 19: ISAKMP: sending private address: 192.168.0.21

  * 14:29:31.627 May 19: ISAKMP: send the subnet mask: 255.255.255.0

  * 14:29:31.631 May 19: ISAKMP: sending IP4_DNS server address: 192.168.0.1

  * 14:29:31.631 May 19: ISAKMP: sending ADDRESS_EXPIRY seconds left to use the address: 3576

  * 14:29:31.631 May 19: ISAKMP: string APPLICATION_VERSION sending: Cisco IOS software, software C870 (C870-ADVIPSERVICESK9-M), Version 12.4 (15) T7, VERSION of the SOFTWARE (fc3)

  Technical support: http://www.cisco.com/techsupport

  Copyright (c) 1986-2008 by Cisco Systems, Inc.

  Updated Friday 14 August 08 07:43 by prod_rel_team

  * 14:29:31.631 May 19: ISAKMP: split shipment include the name Protocol 120 network 0.0.0.0 mask 0.0.0.0 0 src port 0, port 0 DST

  * 14:29:31.631 May 19: ISAKMP: sending save the password answer value 0

  * 19 May 14:29:31.631: ISAKMP: (2081): respond to peer 151.38.197.143 config. ID =-851463821

  * 19 May 14:29:31.631: ISAKMP: (2081): lot of 151.38.197.143 sending my_port 500 peer_port 500 (R) CONF_ADDR

  * 14:29:31.631 May 19: ISAKMP: (2081): sending a packet IPv4 IKE.

  * 14:29:31.631 May 19: ISAKMP: (2081): node-851463821 error suppression FALSE reason "error no.".

  * 14:29:31.631 May 19: ISAKMP: (2081): talking to a customer of the unit

  * 14:29:31.631 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_AAA, IKE_AAA_GROUP_ATTR

  * 14:29:31.631 May 19: ISAKMP: (2081): former State = new State IKE_CONFIG_AUTHOR_AAA_AWAIT = IKE_P1_COMPLETE

  * 14:29:31.635 May 19: ISAKMP: (2081): entry = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE

  * 14:29:31.635 May 19: ISAKMP: (2081): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE

  Here the Iphone remains unused for a few seconds...

  * 14:29:48.391 May 19: ISAKMP (0:2081): received 151.38.197.143 packet 500 Global 500 (R) sport dport QM_IDLE

  * 14:29:48.391 May 19: ISAKMP: node set 1834509506 to QM_IDLE

  * 19 May 14:29:48.391: ISAKMP: (2081): HASH payload processing. Message ID = 1834509506

  * 19 May 14:29:48.391: ISAKMP: (2081): treatment of payload to DELETE. Message ID = 1834509506

  * 14:29:48.391 May 19: ISAKMP: (2081): peer does not paranoid KeepAlive.

  * 14:29:48.395 May 19: ISAKMP: (2081): peer does not paranoid KeepAlive.

  * 14:29:48.395 May 19: ISAKMP: (2081): removal of HIS right State 'No reason' (R) QM_IDLE (post 151.38.197.143)

  * 14:29:48.395 May 19: ISAKMP: (2081): error suppression node 1834509506 FALSE reason 'informational (en) State 1.

  * 19 May 14:29:48.395: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)

  * 19 May 14:29:48.395: IPSEC (key_engine_delete_sas): rec would notify of ISAKMP

  * 19 May 14:29:48.395: IPSEC (key_engine_delete_sas): remove all SAs shared with peer 151.38.197.143

  * 14:29:48.395 May 19: ISAKMP: node set-1711408233 to QM_IDLE

  * 19 May 14:29:48.395: ISAKMP: (2081): lot of 151.38.197.143 sending my_port 500 peer_port 500 (R) QM_IDLE

  * 14:29:48.395 May 19: ISAKMP: (2081): sending a packet IPv4 IKE.

  * 14:29:48.399 May 19: ISAKMP: (2081): purge the node-1711408233

  * 14:29:48.399 May 19: ISAKMP: (2081): entry = IKE_MESG_INTERNAL, IKE_PHASE1_DEL

  * 14:29:48.399 May 19: ISAKMP: (2081): former State = new State IKE_P1_COMPLETE = IKE_DEST_SA

  * 14:29:48.399 May 19: ISAKMP: (2081): removal of HIS right State 'No reason' (R) QM_IDLE (post 151.38.197.143)

  * 14:29:48.399 May 19: ISAKMP: (0): cannot decrement IKE Call Admission Control incoming_active stat because he's already 0.

  * 14:29:48.399 May 19: ISAKMP (0:2081): return address 192.168.0.21 to pool

  * 14:29:48.399 May 19: ISAKMP: Unlocking counterpart struct 0 x 84084990 for isadb_mark_sa_deleted(), count 0

  * 14:29:48.399 May 19: ISAKMP: return address 192.168.0.21 to pool

  * 14:29:48.399 May 19: ISAKMP: delete peer node by peer_reap for 151.38.197.143: 84084990

  * 14:29:48.399 May 19: ISAKMP: return address 192.168.0.21 to pool

  * 14:29:48.403 May 19: ISAKMP: (2081): node-1427983983 error suppression FALSE reason 'IKE deleted.

  * 14:29:48.403 May 19: ISAKMP: (2081): error suppression node 1322685842 FALSE reason 'IKE deleted.

  * 14:29:48.403 May 19: ISAKMP: (2081): node-851463821 error suppression FALSE reason 'IKE deleted.

  * 14:29:48.403 May 19: ISAKMP: (2081): error suppression node 1834509506 FALSE reason 'IKE deleted.

  * 14:29:48.403 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH

  * 14:29:48.403 May 19: ISAKMP: (2081): former State = new State IKE_DEST_SA = IKE_DEST_SA

  * 19 May 14:29:48.403: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)

  It seems 877 comes even to assign a local ip address of LAN for Iphone (192.168.0.21) but then something goes wrong...

  Any idea or suggestion on this?

  Thank you very much

  Hi Federico,.

  Please let us know.

  Please mark this message as answered while others will be able to learn the lessons.

  Thank you.

  Portu.

• After installing the version 36.0 whenever I go to a Web site, I get "server not found" and I have to refresh

  After installing the version 36.0 (yesterday) on the desktop and laptop, whenever I go to a site that I get "server not found" and I update the site to access.

  I checked my firewall and it is configured correctly.

  And I changed the proxy for 'no proxy '.

  Still not fixed.

  Thanks in advance.
  David

  I went back to the 35.0.1 version and it seems to have solved the problem.