memory problems after installing the network card passthrough.

Similar Questions

• Error 0X0000007E Stop after installing the new card mother and CPU.

  Original title: Stop error after installing the new card mother and CPU.

  After I installed a new motherboard and CPU I got a stop error 0X0000007E (0XC0000005, 0XB77EA756, 0XB84C742C, 0xB84C7128) and it restarted immediately. It always starts in safe mode, but I can't understand what is wrong. The old processor is a pentium 4 3 ghz, not sure what the motherboard was, new processor is AMD Athlon 64 X 2 Dual core 4200 + and I only know that the motherboard is an ASUS socket AM2. Device Manager does not recognize the CPU correctly, it shows just two entries called processor. As far as I can tell, it's almost certainly a driver issue, but I don't know how to diagnose or fix this. I am running windows XP home, I removed my video card, running 2 hard drives at 120 g (M) and 200 g (S), a DVD drive (M) and a reader of CD (S), and a stick of RAM to 1 GB.

  If you have made the change without having to reinstall XP, you will be taking and Pray H@ll. the best thing to do would be to reinstall XP and make sure you have the drivers available for your motherboard available so that you can update the installed chipset. In addition, be aware that if you have an OEM of Windows version, the license is dead when you changed the mother/CPU card.

  I hope this helps.

• Drawing objects in Firefox and Thunderbird after installing the graphics card MSI R6850 of AMD

  After installing the new graphics card (MSI R6850 CYCLONE 1GD5 PE/OC), pilots the latest on Windows XP 32-bit, I frequently meet with Mozilla Firefox 8.0 and Mozilla Thunderbird 8.0 drawing artifacts. The problem presents itself as a horizontal black bands or model checker color scattered. It occurs especially when the child (like the Download Manager) passage of another application for Firefox or Thunderbird or when to switch to a window for Firefox. It affects the entire application or only some rectangular (region clearly who was redesigned due to change of application). Then repaint (such as switch between Firefox tabs) usually solves the problem. This is just visual, the behavior is not affected. The problem never happened to any other application so far. Any ideas? Any who have experienced the same problem? Thanks in advance.

  Zbynek

  P.S. Here's the screenshots for the two problems:

  http://astrofoto.euweb.cz/tmp/black_stripes.jpg
  http://astrofoto.euweb.cz/tmp/color_boxes.jpg

  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  If disable hardware acceleration works then check if there is an update available for your graphics display driver that corrects these problems.

• long beeps after installing the video card

  Hello

  I recently bought a HP 500-223w.

  I wanted to install a power supply a video card.

  Here's the problem: everything works fine without the installed video card.

  If I install the video card then at startup it gives me a series of long beeps.

  I turned it off after the long fourth beep assuming they would UST go on and on.

  The power supply is more than enough to power the video card.

  The video card should not be bad, because I just moved it from another system. (system currently does not, bad mobo)

  I was wondering what the infinite long beep on startup?

  Thanks and regards, TJames.

  Hello:

  Product for your PC specifications indicate that it comes with Windows 8.1.

  To install a video card no HP on PC shipped with Windows 8 or 8.1, you must change both settings of the BIOS before installing the card.

  Please see this document for the BIOS to change settings...

  http://support.HP.com/us-en/document/c03653200

• Problem after installing the driver VGA for HP Pavilion 1212TX g4

  Hello. I just bought a new HP Pavilion 1212TX g4.

  I install Win7 Ultimate Pro in it and no problems found. But after I installed the VGA driver (ATI Catalyst) the problem occurs.

  The error occurring on the screen is something like this: Access Violation (0xc0000005).

  Cannot run multiple applications installed once the error occurs (for example: iTunes, Nokia Suite, Adobe Reader).

  I am looking for the AC VGA driver for HP Pavilion 1212TX g4 but the problem still occurs.

  Please someone help me. I can't use my new laptop

  Thanks in advance

  Herry

  If you have installed the drivers from various sources I start over with a clean install of Windows 7 at this point and use the specific drivers for your model >& drivers starting first with Chipset and AMD graphics card, driver Intel Rapid Storage Technology and all other cases.

• The program monitor is black, no video after installing the new card chart

  I bought a graphics card PNY Nvidia Quadro 2000 a few days ago, and since that it is been installed, I was unable to watch videos in my program, the source or the same reference monitor.

  Similarly, if I designate one of my monitors soley for video playback, the screen is all black, and as the timecode to advance my calendar I only hear.

  My project is using "The Mercury Playback Engine GPU acceleration" for first Pro CS6.0.1

  I went to use a graphics card with two graphics cards and installed a third-party monitor. I spent these days around trying everything I could think of, I even uninstalled and reinstalled the first.

  Hardware specifications:

  Windows 7 ultimate (64 bit)

  HP Pavilion h8-1230z

  AMD-FX8150 Ghz 8 core processesor 3.59

  16 GB OF RAM

  PS 600W

  EVGA Nvidia GeForce GTX 550Ti

  PNY Nvidia Quadro 2000

  I use a PCI x 16 for the Quadro 2000

  I use a PCI x 1 adapter w / x 1 - x 16 slot for the 550Ti

  Could be the problem?

  More information

  Vectorscope, all scopes, YC - waveform Display modes all work.

  I downloaded the latest Nvidia drivers for both of my cards.

  I did not receive messages error or had problems in After Effects CS6, as video playback works fine in my other adobe applications.

  Since you have very recently purchased the Quadro, try to return it and replace it with a nVidia GTX 670. Approximately equal to the price, but the GTX 670 is much faster and it supports up to 4 monitors, so you can remove the Ti 550 and sell.

  I guess your problem is configuring dual video card that use different drivers. Double video cards is possible, even if PR can use the main map, but drivers must be the same for both cards and this is not the case.

• IdeaPad 100 s-11IBY problems after installing the update of Windows 10 anniversary (aka version 1607)

  Yesterday, my 11IBY-100 s installed update 10 birthday Windows (aka Windows 10 Version 1607). Now, it has multiple problems and is unusable.

  1. the keyboard (Yes, the built-in keyboard) does not work. None of the keys (letters, numbers, 'actions' as BACKSPACE) work not at all. If I plug in a USB wireless keyboard, it works fine. So maybe there is a problem with the device driver for the built-in keyboard with the update of the anniversary. The keyboard works perfectly until Windows Update installed upgrading birthday.

  2. the trackpad is not working. If I plug in a USB wireless mouse, it works fine. So maybe there is a problem with the device driver for the trackpad with the update of the anniversary. The trackpad has worked very well until Windows Update installed upgrading birthday.

  3. the Kingston 32 GB microSD card plugged into the microSD port is not recognized by the file Explorer. If I plug the 32GB Kingston microSD card in a USB microSD card reader and plug the card reader into a USB port, microSD storage is recognized in the file Explorer, so the microSD itself is fine. So maybe there is a problem with the device driver for the port microSD with the update of the anniversary. The microSD port works great and the micro SD card has been recognized in the file Explorer until Windows Update installed upgrading birthday.

  4. There is no audio data, Windows now indicates that no audio hardware is installed. So maybe there is a problem with the device drivers for the builtin microphone and the built-in speaker with the update of the anniversary. They worked fine until Windows Update installed upgrading birthday.

  I tried to do a RESET, but unfortunately although the reset worked, it resets Windows 10 Version 1607 (aka anniversary update) not an earlier version of Windows 10 and I still have all the problems above. Far as I can see, the Windows settings now say there is no history of update and no previous version of Windows, so I can't use any method of recovery which is available on the PC itself to go to an earlier version of Windows.

  Please can someone advise how to reset my PC (and where I can get the 32-bit Windows 10 appropriate ISO file or other) Windows 10 Version 1511 (i.e. before the update of the anniversary)?

  Or, Alternatively, device drivers are valid for Windows 10 Version 1607 for builtin keyboard, trackpad, port, microSD, microphone and speaker available somewhere? I can't see on the Lenovo Web site.

  Ron

  On the Lenovo site, in "Drivers and software" for this unit, there was a "Chipset" called driver «Intel platform driver for Windows 10 (32 bit) - Ideapad 100 s-11IBY» I downloaded and installed, then after being invited, rebooted the device. I am pleased to announce that

  the keyboard now works

  (b) the trackpad works now

  (c) the microSD card is now recognized by the file Explorer

  (d) the audio now works

  Ron

• Problems after installing the new disk in the Satellite M70 151

  I have a Satellite M70-151 the hard drive gave up and was unreadable, before that I was using with my desktop via a router, that it worked very well. I had no option but to install a new hard drive now in System Manager, I get of the yellow question marks against:
  Other features:
  ? Mass storage controller
  ? Network controller
  ? Modem PCI
  ? Video controller (VGA compatible)

  I searched and searched, but can not find the drivers for these 4 things

  I have sound but only weak, I don't have a WiFi Yes feature I tried to install the good (as advised by Toshiba) Lan Driver [link to driver | http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?ID=58122&OSID=10&drive rLanguage = 42 & selectedLanguage = 13 & driverCountry = 41 & selectedCountry = 8]

  When I try to install it says "the device may not be present or could have been ejected/disconnected from the system.
  Insert or reinsert now. "
  I know I am being thick but I was under the impression that the Lan has been integrated into the laptop? :_|

  I would be sincerely grateful for all of the advice of my peers. :)

  Stuart

  First of all, we should start with basic information;
  The M70-151 Sat belongs to the series of PSM71E that's why you should choose this issue of the European driver Toshiba page if you want to download the correct drivers.

  _You will need these drivers: _

  Mass storage controller I think it is a cardbus driver
  Controller - s network a LAN or WLan card computing. First, check which driver is already installed
  Modem PCI driver modem ;)
  Display video Controller (VGA compatible) driver

  Greetings

• Satellite P100 - display problem after installing the Samsumg software

  Hello

  I have a Toshiba P100-PSPA3 and just bought a new external monitor Sincmaster from Samsung. I installed it yesterday and everything works fine, I just plug in and the laptop recognizes it as a second monitor. Then I noticed the monitor comes with a CD and they recommend you to install the components of this CD.

  I installed the driver and still works fine but then I installed a software called * Magic money *, it is said that I should make a new start, I did and the image comes in the second monitor, * my laptop screen is black.*
  Then I begin to try all the possible solution I had in my head. I open this Magic Tune, and he says that it s not compatible with my computer, so I uninstall it. I have downloaded the drivers from Nvidia, Toshiba, installed again and again doesn´t work.

  I prove with the nvidia settings and the West without change. NVIDIA doesn´t recognize my laptop as a monitor, screen it recognizes just the Samsumg Sincmaster.

  I looked for people with the same problem in other forums and a possible solution was to turn off the computer, remove the battery and press the power for a few seconds, trying to carry out the computer. I did and it didn t work.

  Someone here could give me a light? I m totally lost now and I have to work with my computer in the next few days!
  Thank you very much
  Ivan

  Hello

  This software is not known to me and it is important to say that notebook manufacturers may not support some third part software.

  I put t know if this software must be preinstalled but I'm sure you can use your external display without it. When the external display is connected, you can switch between the LCD and external monitor by using the FN + F5 key combination. If you want to extend the display outside a use Windows display settings. It should work. I tested several laptop Toshiba with a few different monitors in my office and I n t noticed no problem.

  Have you already solved your problem or you are still looking for the solution?

• Cannot access bios after installing the video card

  I have a PC HP 800 G1 tour.  When I install an EVA GT 520 external video card I can access is no longer the first screen to get the bios unless I get out the video card.  I want to change the bios to use only the external card, or at least to see the initial splash screen, but cannot access it.  It is running windows 8.1.  I updated the bios to the lasest version and still the same.

  Hello:

  You may need to change some BIOS settings - even if you add an external video card...

  http://support.HP.com/us-en/document/c03653200

• Help! I lost his PC after installing the video card. The software installed its HDMI audio driver. How can I get sound on PC speakers?

  To watch TV on the big screen, I installed a video card with HDMI output. (Sapphire Radeon HD6450)
  The software installed its own device driver (AMD Hi definition audio) but disabled my PC speakers (and the headphone jack).
  (The sound is displayed on the TV very well, via HDMI, in which I can not type)
  I tried to re - activate the driver Legacy in the management of the computer, but the field enable is gray.
  The PC is a hp Pavilion a1630n
  It is essential for me to get a sound on my regular speakers to work on the PC.
  How?

  Hello

  You can check this link:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• Problem after installing the new drive on Pavillion G6-2320

  The original hard drive on my old book of 8 Windows Pavillion G6-2320 3 months crashed and I sent to HP and got the replacement of the hard drive (laptop still under warranty). They gave me support online printing that I just need to install it in the laptop and would not need the disc to install the operating system. (I had originally bought my own replacement hard drive and had error messages so chatted with online support who took care of the hard drive replacement confirmed that indeed one supplied with the laptop has been damaged)

  After you install the new hard drive and turn on the laptop, the following message appears on the black screen:

  Not found boot device

  Please install an operating system on your hard drive

  Hard drive (3FO)

  The F2 System Diagnostics).

  I went to F2 and test the hard drive. Everything was made. Help please!

  Thank you

  Hello:

  You will need to call HP support and ordering of a set of recovery disc for your model in order to install the operating system and the programs provided with your laptop.

  HP is not delivered replacement hard drives pre-configured with any software.

  They should also ship you the free of charge from the PC recovery discs is still under warranty.

• Problems after installing the second SATA drive in Windows 7

  I just install a second SATA hard drive in Windows 7. Currently, I use only a processor AMD Athlon X 2 4800 with 3 GB of RAM, Windows 7 64 - bit, installed on a 400 GB Samsung SATA drive and have two (a pioneer and a Liteon) DVD burners.

  System worked fine until I put in the new drive. Previously, I had hung as such discs: SATA1 was the existing 400Go drive, SATA2 and 3 were two DVD burners (don't ask me why, I have 2, will remove one of them, if that's the problem).

  Installed the new HARD in the SATA4 drive. Booted up, saw the new drive in the BIOS, but Windows does not see it until I went to disk management, a drive letter assigned and formatted etc. Also, I swapped the drive letters so I had all of the HARD drive (I have my 400 GB split into two readers via the partition) and C: D: E: F: and G:, DVD players.

  Started, began to transfer data from D: to the new E:, and Windows crashes. No message error, everything freezes. Need to reset, and then allow Windows to check for errors etc. Return to Windows, same case again. I swapped the SATA cables so that SATA1 and 2 are the HARD drives and SATA3 and 4 are DVD players. Reboot, same case.

  What I am doing wrong? Or what should I do? I don't even have to start the transfer of data I just let WIndows running for 2 minutes and it automatically hangs again.

  If someone could help me as soon as POSSIBLE please, it would be fantastic. Thank you!

  I've been in contact with the provider, and Yes, that will take it back for Exchange. They gave me some ideas to try first, I'm going to do tonight; They asked me to check if the HARD disk is running on series complete ATA (SATA) mode and to enable the DMA if he asks me to. Otherwise, they said, try the fail-safe mode. Don't know if any of them are currently enabled etc but will find tonight.

  All else fails, I take that back! Simply means a 3 hours trip to Melbourne to make...

  Thanks again guys for your help.

  Michael.

• Vista hang up on start up after installing the VIDEO CARD of 680 GTX

  I have installed a 680 GTX graphics card in my system, now Vista will not start in normal mode, it crashes after loading bar, leaving only
  a white screen with a mobile mouse pointer. I can boot into safe mode, try uninstalling and reinstalling the latest drivers for the card, without change.

  I solved the problem by doing a restore of the system in safe mode, remove the old drivers with Driver Sweeper, then reinstall the drivers again. The card works fine now.

• Cisco VPN problems after installing the 506e

  My apologies if this makes no sense, because it is my 1st install of a PIX.

  I distance support external sites and had a Cisco VPN 4.6.00.49 connection through our Linksys router for access, company which worked a treat. We asked to have VPN access to our society, so I replaced the Linksys with a 506th PIX. I ran the Wizards(Yes I heard the gasps from 90% of you then) GUI access Internet out worked, came from e-mail in Exchange server and external users could vpn in our internal network. Great, I thought!

  BUT NOW

  I have a problem with coming out through the 506th pix VPN.

  My client connects to the external site. Authenticates the Logni & assigns a valid IP address. Unfortunately I couldn't make a ping, rdp or anything with the remote network.

  Thanks in advance

  Paul

  Paul

  Sorry, I wasn't clear on my post - that the order was necessary on the remote device. In any case I'm glad to hear his work.