client vSphere 4 cannot connect to ESXi3 3.5

Similar Questions

• Client Windows 2000 cannot connect

  Hi all

  I have a Pix515 and am trying to get windows 2000 to connect VPN to L2TP over ipsec. I get the following message from the PIX debugging

  IPSec (validate_transform_proposal): proxy unsupported identities

  Anyone have this problem?

  Thank you

  Christian

  Check your crypto accesslist.

  http://www.Cisco.com/warp/public/110/L2TP-IPSec.html

  With certs, but shud give u an idea.

  THX

  AFAQ

• VSphere Web Client cannot connect to the server vCenter Single Sign On.

  I'm running the virtual appliance of the trial 5.5.0.20400 build 2442330 on ESXi 5.5.0, 2068190

  While I try to log on to the Web Client, I get this error.  VSphere Web Client cannot connect to the server vCenter Single Sign On.

  I put fallow the steps to disable SSO by changing the webclient.properties line add file and ad sso.enabled = false .    Then on the vCenter Server Appliance, restart the vSphere client service by typing service vsphere-client restart .

  I enclose the reference files.

  All ideas will be useful

  
  

  This answer was simple, all I had to do was remove the # in front of the statement in the file.   and SSO has been disabled after the restart of the service.

• VSphere Web client and client heavy cannot connect to Vcenter server 5.5, web client fails with 2032 error before the connection, then the work after one minutes ferw.

  Hi all

  I really need help here.  I have a new installation of Esxi5.5 and installed the server vcenter build 5.5.0.5201 device 1476389.

  I have host files properly configured for DNS and Server 2008 R2 running that I use to connect with the client or web client heavy.

  Initially, I get an error with the web client to connect, he began to paint Vmware and when it comes to 'r' in the name it fails with #2032, so I can no longer

  access the page at all, he says: connection refused for the page. If I wait a while I can connect again.

  heavy client vSphere fails at this time as well.  However, I cannot communicate directly with Vsphere client to server esxi host and it works all the time.

  There seems to be a problem with the device of vcenter server because the thick client fails, and does not open a backup program using vcenter server

  inventory when this happened.

  Please help, it drives me crazy...

  Dan

  Hello

  Since I found the solution to the problem of connecting to the device of vcenter.  It is a conflict of IP address on the network.  There was a machine with the same IP address virtuall

  as the vcenter server.  This caused intermittent problems etc.. Why web client would still work if I have the vmware client open I do not know

  so thank you for your help.

  Dan

• Cannot connect directly to Esx via the vSphere Client.

  Hello

  I can not connect directly to ESX through the le VSphere client. I have the following message:

  "Can not connect to "xxx"vSphere Client. Un unknown connection error has occurred. (

  The customer not able to send a complete application on the server. (Underlying connection was closed. An unexpected error has occurred when sending.)). »

  
  

  Le ESX reply to ping et name resolution are correct. They are seen by the vCenter and sshh connection to ESX is possible.

  
  

  Version: Esxi, 5.5.0, 1892794

  VSphere Client 5.5.0, 1880841 on Windows XP SP3
  

  
  

  Thank you for your help

  Have a look here: vSphere Client 5.5 and WindowsXP/Windows2003 & #8211; Unknown connection error & laquo; Mike Landry & #8230;

• English (Singapore) on Window XP SP3 - CRM outlook client cannot connect to the CRM system

  original title: English (Singapore) on Window XP SP3

  We have an error on the CRM. CRM outlook client cannot connect to the CRM system. This question because of the language English (Singapore). We cannot locate region & language English (Singapore) on Window XP SP3.

  Hello

  ·         Do you have English (Singapore) installed on the system?

  ·         What exactly are you trying to do?

  ·         What is the exact error message, are you trying to change the system language to English (Singapore) or what?

  ·         What version of the Microsoft CRM client is installed on the system?

  To access the parameters of language and the region on the system, I suggest you to check the below link.

  Regional and Language Options overview

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/int_pr_custom_workspace_regionalsettings.mspx?mfr=true

  I suggest you to post your query in then the link mentioned below.

  https://community.dynamics.com/product/CRM/f/117.aspx

• WAG-120N and static ip - wireless and wired clients cannot connect to the internet

  Greetings,

  I use the N WAG-120 AP and switch for 3 computers laptops and 2 Office. Our Department is assigned only a what IP static of our server, as well as a pc can connect to the server and the internet. I use the first lan port of the 120N Wag as a WAN port and I attribute the static IP address, and the subnet, default gateway, and DNS addresses. Connected clients receive an ip address from the DHCP (192.168.1.10x) router, but cannot connect to the internet. How can I configure my router to allow clients to connect?

  Thank you in advance!

  The default LAN IP of the WAG subnet is 192.168.1.0/255.255.255.0 belongs to 192.168.0.0/255.255.0.0. This means that 192.168.1.0 IP addresses exist side WAN and LAN of the WAG. What makes this configuration completely cannot be routed.

  Change the address LAN IP of the WAG to an IP outside the corporate network, for example using IP addresses private 172.16/12, for example to set the address LAN IP 172.16.1.1 with 255.255.255.0 subnet mask.

  The alternative would be to use the WAG as a point of easy access only, and not as a router. However, due to the 255.255.0.0 subnet in your network company you will not be able to access the web interface except from an IP address corresponding to the LAN IP address subnet of the WAG. Of course, this does not affect the wireless or wireline customers connected to the WAG...

• Windows 7 Edition home premium error "Windows cannot connect to the Group Policy client service."

  Original title: guest for Windows 7 Home Premium account

  Hi all

  I would like to aid which has had to face the problem below and how it was fixed.

  I have Window 7 Edition home premium and created a guest account with normal privileges that is turned on but cannot access with the error "Windows could not connect to the Group Policy client service" I think that the main problem is related to a policy because when put on the account to administer it in pop, error message says 'Cannot connect to a windows service' Please check group policy log.

  Thank you very much in advance

  Hello

  Thank you for your time and effort to get back to us, and I apologize for the delay in responding.

  Method 1 step number d makes reference to the present Details tab on the event viewer, where you can get the details of the error. First, search for the error which will be something like Windows cannot process extension Client Strategy Group-side and click on the error and then click the Details tab and make a note of the GUID (Globally Unique Identifier) for the extension defective client-side. For reference, see the screenshot:

  

  Now come to step f number , it indicates the location of the Group Policy Extensions so that you can check if the extensions shown in the case log and the Registry Editor extension have a difference. The path of the GPExtension is HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon\GPExtensions. For reference, see the screenshot:

  

  Let us know if the steps are clear to understand now. If this isn't the case, we will be happy to help you further.

  Thank you.

• VWC plugin using sdk 5.1 is broken if running on the web client 6.0 with port 9443 - out could not connect to the Web Client vSphere. Contact your administrator to resolve this problem.

  We did a vwc with sdk 5.1 plugin, now, we want to make it work on the web client 6.0. before the race, we have changed the MANIFESTO. MF and services-config. XML responses such as the following:

  2 important reminders for your plugin 5.5 is compatible with the Web Client 6.0

  After that, we deployed our plugin on web client 6.0

  If access us using the URL with port: https:// < ipaddress >: client/vsphere-9443 /? csp, our plugin arises, our plugin function is also ok.

  If access us using the URL without port: https://< ipaddress > / vsphere client /? csp, our plugin is present, the function is broken (error occurred when flex user interface by calling the java service: "Could not connect to vSphere Web Client.) Contact your administrator to resolve this problem. »).

  Thank you very much

  Please change the CHANNEL_URL in your proxy classes to use 'amf' instead of 'amfsecure '.

  private static const CHANNEL_URI:String = "/" + YOUR_MODULE.contextPath + "/messagebroker/amf"
  

  This should solve your problem.

• Cannot connect Vsphere host

  Hi all

  Until now, I was able to connect to the vsphere host, but some do not know how his disconnected, am able to ping the host vsphere 4.0, but when I try to connect client vsphere it gives me error attached.

  A cam in all of these question, is there any tobe need to service restarted on the console directly.

  

  Concerning

  Riadh Gunnal

  http://tech2solution.blogspot.com

  I guess, you must restart the ssh (putty) session management services: -.

  service mgmt-vmware restart

  service vmware-vpxa restart

  Wait 2 - 3 minutes after that and try again.

• Cannot Connect to Host ESXi 4.1 with browser or Client VI

  Hi, I have a strange problem which has persisted since I first installed ESXi 4.1 on a server. First my setup:

  • ESXi Installable on a HP DL380 G6 server, 32 GB of RAM, 4xEmbedded NETWORK ports, Port NIC, 2 iSCSI x QLogic QLE4060C HBAs 1xDual adapter

  • HBAs configured for Jumbo and static IP frames but except that all the settings are default

  We have installed ESXi 4.1 with only the built-in port #1 connected to the switch. Everything went well and we were allocated the only active NIC (vmnic0) as the management interface. Once installation is complete, we were able to connect to the management interface using a browser and the VI client.

  We then connected NETWORK card and remaining HBA ports to the switch without loss of connectivity to the management interface. During our next restart we could no longer connect directly to the host using a browser or the VI client but could still ping the IP.

  We tried to restart the management agents, but it did not help.

  Here are the different startup scenarios, we tested and the results:

  Scenario #1 - Boot with built-in NICs, DP adapter cards, network and HBAs connected to the switch.

  • Can we ping the IP of host of Mgmt? = Yes

  Can • we consult to the IP host of Mgmt or connect using the VI Client? = NO

  Even if we try to unplug the adapter DP and HBA ports after starting we still cannot connect to the management using the Explorer or the VI Client interface. A reboot is required, and the script #2 or #3 must be followed.

  Scenario #2 - start with only the embedded and DP adapter NIC connected to the switch.

  • Can we ping the IP of host of Mgmt? = Yes

  Can • we consult to the IP host of Mgmt or connect using the VI Client? = NO

  If disconnect us the two ports of adapter DP we can then connect to the host via the browser or the VI client without having to restart. We can reconnect them and we continue to have access to the host, and everything is fine.

  Scenario n ° 3 -Boot with only the NIC integrated, including the Mgmt NIC connected to the switch.

  • Can we ping the IP of host of Mgmt? = Yes

  Can • we consult to the IP host of Mgmt or connect using the VI Client? = Yes

  Then we connected the DP adapter and the adapter port HBAS to the switch and all the connectivity was very good. This scenario is our solution for now.

  Other information

  The QLE6xxx ESXi module takes about 5 minutes to load during startup, when the HBAs are connected to the switch, but it loads successfully. Not sure if this is normal or not.

  Thank you in advance for your help!

  Paul

  This looks like a very unusual network for me configuration.

  Could you post a screenshot of virtual network configuration and add a few comments on the different configuration of the vSwitches and uplink connected.

  If I understand correctly that you have at least 3 vSwitches (management, virtual machines, and iSCSI), however, from what you wrote so far I do not completely understand how implement you.

  André

• vCentre Server 2.5 cannot connect to the VSphere host

  vCentre Server 2.5 with VMware 3.5 host work well, but it cannot connect to VSphere host.

  On step 4: ready to perform, there is an error message:

  Cannot access the specified host. He either does not close, the server software does not respond, or there is a network problem.

  In fact, I can see all the virtual machines on the host vSphere on phase II: summary of the host. So, I do not suspect the problems to which the error message mentioned above. I really want to know how vCentre 2.5 Server can work with vSphere well.

  Thank you!

  George

  Hello

  vCenter Server 2.5 is not compatible with vSphere 4.x host. I think that VMware announced document compatibility matrix (between hypervisor host ESX and vCenter Server or other components). Please see below URL:

  www.VMware.com/PDF/vSphere4/R41/vsp_compatibility_matrix.pdf

• vSphere cannot connect after time on the host change

  I am a relative noob when it comes to virtualization.  I did a lot of research for the response, but can't find it.  Maybe you guys can help.

  Connected to the host (VMWare vSphere for ESXi 4.0) management console, I changed the time on the host because he was distant.  After that, the vSphere console has become very slow, and when I clicked on another tab it has expired.

  I closed vSphere and tried to reconnect and now I have a message that says:

  vSphere could not connect with the server vCenter Server "[host IP address] '.

  Details: A connection failure has occurred (unable to connect to the remote server)

  I went directly to the physical console machine and press F2 to enter the system setup.  I restarted the management agent.  I can ping the IP address.  I can not connect via puTTy, but I do not think that I never activated the SSH access.

  Has anyone ever encountered this?  What should I do?  I can't restart the host right now because the production servers are running on the VMWare.  If I have to restart later, what is the correct procedure for this? (close the BONES of the VM, and then restart the host?)

  I had this happen before. I was unable to restart the services or navigate from the console. I waited until hours off-peak and connected directly in the less critical guest OS and stop them. I had to stop several before I could get access again vcenter. Once I had access i vMotioned the rest of the guests to other hosts and restarted the ESXi host. It's a risk, because if you cannot close machines you have to powercycle. You seem to have access, so you can be able to stop them from the CLI on the host.

• client vSphere 4 connect to ESX 3.5

  I did some research but can find no definitive answer.

  How to use my client vSphere 4 directly manage an ESX 3.5 host without it forcing me to download and install the VI 2.5 client?

  Thanks in advance!

  Yes, you can connect to a host with the customer vSphere4 VI3, but if you do not have the VI3 Client it will install it.  Once it's done you can just use the vSphere4 Client connect to VI3 or vSphere4.

• Cannot connect to one or more systems of vCenter server: 5.5 DEVICE VCENTER

  Hi all

  Please help me.

  I installed with the new v 5.5 Center device in my environment.

  I connected with external oracle db.

  enabled embedded SSO.

  connected with windows AD.

  in the screen configuration .the entire state of the service are running. Ok

  https://x.x.x.x:5480 /.

  After web client loggin

  https://x.x.x.x:9443 /.

  HAD an ERROR.

  "Cannot connect to one or more systems of vCenter server:

  https://x.x.x.x:443 / sdk

  

  Note:. I reboot my device vcenter and try... got same error.

  I created the new group for vcenter advertising and tried... got the same error.

  When connecting with the Vsphere client: error below.

  "Connection unknow error (this only happens because of a logon failure." (Unable to connect to remote server")

  

  Please help me on this.

  Browlin

  Hello P.,

  After re install and follow the previous step the problem is resolved.

  Thank you

  Browlin