Close / sleep on vista computer functions to restart instead

Similar Questions

• Vista home PR., after that "sleep" mode, the computer wakes up not (dell inspiron 530)

  Dell inspiron 530 vista PR. House, after the "sleep mode" the computer doesn't wake up. The mouse works fine. (the computer is set to wake you up at a mouse click)  When I click the mouse fan goes up like to spend awake mode, but fan and the power light continues to blink.  I press the power button once and stop the computer, then the computer says recovery and gets stuck again. Then I turn it off again and it completely restarts and the power led will stop blinking and I'm back in business. -arg... Help! Thank you.

  Hello

  You did changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Follow the steps mentioned in the links below.

  The problems of wake the computer from sleep mode

  http://support.Microsoft.com/kb/266283

  A Windows Vista-based computer resumes the mode not sleep if you move or click a USB mouse as the computer is switch to sleep mode

  http://support.Microsoft.com/kb/930091

  Method 2:

  Refer to the section "Why doesn't my computer go to standby or hibernate as expected, or why he wake up suddenly?" the link mentioned below.

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

• When I close a session, the computer turns off completely, but restarting said closing innacurate?

  When I close a session, the computer shuts down completely.  When I run again, I have the closure inappropriate message, why is it like that?

  Hello

  If I understand correctly the computer automatically stops when you close a session / program and displays the message "incorrect closure.

  is that correct?

  Please follow the links below to solve the problem.

  Start your computer in a clean boot to avoid conflicts with third-party software.

  Method 1

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: When you have finished all necessary troubleshooting steps, please follow step 3 of the article mentioned above, to start the computer in normal mode.

  Run a SFC system analysis

  Please post the SFC scan results, you can find the results of the analysis to the following location.

  C:\Windows\Logs\CBS\Cbs.log

  Method 2

  Description of the error event ID 41 core Windows in Windows 7 or in Windows Server 2008 R2: "the system has rebooted without stop properly first.

  http://support.Microsoft.com/kb/2028504

  Method 3

  Please scan the computer for infections by using the links below.

  Reference link:- http://www.microsoft.com/security/pc-security/default.aspx#Safety-products-and-scans

  Microsoft antivirus software: -.

  http://www.Microsoft.com/security/PC-security/malware.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  It would also help if you provided more information.

  1. What is the full error code / exact / message?

  2 is specific to an application or a program being closed the question?

  3. what version of the Windows operating system do you use?

  4. What were the recent changes of hardware or software that are performed on the computer before the question?

  Please provide the information requested to receive specific troubleshooting steps.

  I hope this helps.

• my HP Vista computer cannot start and stay sleeping mode.

  my HP Vista computer cannot start and always stayed at the sleeping mode. Help...

  Hello

  1. is it a desktop or laptop computer?

  2 have you made any changes to the computer before the show?

  3. what happens when you tried to wake the computer from sleep mode?

  Method 1:
  
  Step 1: Safe Mode

  Start your computer in safe mode and check the number.

  
  To start your computer in safe mode
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  
  Step 2: Clean boot
  
  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  
  http://support.Microsoft.com/kb/929135
  Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.
   
  I hope this helps.

• My vista computer keep trying to restart loop error - driver_irql_not_less_or_equal "stop 0x000000D1"

  Original title: my vista computer keep trying to restart loop.

  He came once with the driver_irql_not_less_or_equal. blue screen exports also "stop 0x000000D1 0x00000002, 0x00000000, 0x87dfb395.» I tried to use the vista repair, but it does not start even. I can't go anywhere because I can't even use a limited boot option, is not to happen.

  Hi AllanHolland

  (1) remember to make changes?

  (2) what happens when you try to run the Startup Repair tool?

  
  Step 1: disconnect any external devices (printers, scanner, USB (universal serial bus) drives, etc...)  Except the keyboard and mouse and then start.

  Step 2: run the Startup Repair tool after disconnecting all external devices, see them steps mentioned in the link below

  Windows Vista or Windows 7 unbootable and the Startup Repair tool does not resolve the problem
  http://support.Microsoft.com/kb/934540

  If the problem persists,

  
  Step 3: follow the steps mentioned in the link below to access the system recovery tools and then run the system restore
  How to access the System Recovery Options menu?

  For more information, please visit the link below

  Pick up the pieces after a computer crash
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

• Windows vista installation interrupted, click OK to restart the computer, and then restart the installation

  I was doing a reformat of the factory for windows vista on the laptop of my son (packard bell EasyNote LJ 65) when the battery is dead and the computer turned off. When I started it back up it gives the message: the computer restarted unexpectedly or encountered an unexpected error. Windows Setup cannot continue. To install Windows, click OK to restart the computer, and then restart the installation.
  Everything I try, I get no further than this message, I don't know where to go to continue the installation. The computer does not see that the installation was not completed. I tried to enter the menu with F9 where I had to do the reformatting of the factory of windows but it will not give me the option to continue installation, it shows just the vista Windows, but when I click brings back me to the error message
  Help, please!

  http://support.PackardBell.com/UK/

  For questions about the recovery process, contact the manufacturer of the computer.

  This isn't their recovery process, Microsoft.

  See you soon. Mick Murphy - Microsoft partner

• What is the best way to disable Device Manager to correct the State of sleep in Vista

  I understand that the box peripheral to allow my PC Manager stay in State standby, as suggested in the help of the VICTORY of compensation

  could fix my PC, but there are 16 listed different USB files and I don't know if I should delete all.

  I erased the CB modem but the PC wakes up from his sleep in a min. after clicking on sleep. Any help? Thank you

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  How can I enable hibernation on my Windows Vista computer?
  http://support.Microsoft.com/default.aspx/KB/929658
  How to reactivate the lack of Hibernate Option in Windows Vista?
  http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/

  -------------------------------------------

  Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
  similar are not enabled.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  All the default power plans and then set them as you wish.

  I hope this helps.

• Updated since version 7 or 8 during the installation SETUP message - your computer must be restarted to complete a previous update of Firefox. Do you want to restart now?

  Updated since version 7 or 8 during the installation SETUP message - your computer must be restarted to complete a previous update of Firefox. Do you want to restart now? Options are 'yes or no'. Option 'Yes' restarts my computer & the attempts to Firefox, I get the same message. Reboot several times has no effect. The option 'no' closes the file and nothing happens. Running XP Pro version 2002 SP 3. All normal programs have been updated to the current date (Adobe, Java, etc.).

  Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

  Uninstall your current version of Firefox if possible.

  • Do not remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• Frequently, my computer stops and restarts all am surfing the net? What should I do?

  Frequently, my computer stops and restarts all am surfing the net.  What can I do?

  Hello

  1. what type of internet connection do you use? What is a wired or wireless?

  2. you receive messages or error codes?

  2. did you of recent changes on the system?

  Step 1:

  You can check the following items and check if the problem occurs in safe mode with network.

  Start your computer in safe mode

  Startup options (including safe mode)

  Step 2:

  If you do not experience the problem in safe mode with networking, you can perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

• Windows live quickcam pro 9000 when try to record vidio computer shut down restart

  Logitech Quickcam pro 9000 v-ubm46 window live... Quick capture... take a picture Yes... When try to record vidio computer shut down & restart

  Window xp pro served pack 2.2002 quickcam v11.8

  Suggestions appreciated thank you for research

  had no any error message the computer just black screen close

  Sorry, the problem is with the Quickcam capture

  Thank you for your help

• My desktop Dell - Vista - computer does not, the monitor says no entry and have to wake up computer

  I have a desktop Dell Vista computer.  A few days earlier, when I pressed the power button to turn it on, nothing happened.  When I turned on the monitor, he says that he came into power saving mode.  When I checked the monitor once again, he said that there is no entry for the computer and press any key of the keyboard or mouse to wake up.

  The computer is plugged in and the green light in the back is on.  I don't remember putting the computer to sleep.  I thought I made a stop for a few days in advance.  Press and hold the power button on the computer does not start it or turn it off.  There is no sound (such as a fan).  I unplugged the computer briefly a few times, and then I finally unplugged overnight and is plugged in.  Light lights up in the back, but is not the "num lock" key on the keyboard and the light under the mouse does not light.

  I checked a few suggestions on this site, but they all require that the computer be on and you enter in this form or the screen.  Is the computer dead?

  Thanks in advance.

  Hello

  There seems to be a problem with the hardware, I suggest you to contact Dell support on this subject.

  http://support.Dell.com/

• My Vista computer freezes quite often. I learned that PodData.ll is not part of Msn. What should I do?

  My Vista computer freezes quite often. I learned that PodData.ll is not part of Msn. What should I do?

  Hello

  1. you have any anti-virus installed on the computer program?

  2 - is the computer freezes when running a program or randomly?

  Method 1:

  Step 1:

  I suggest you to check if the problem persists in with clean boot safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  Clean boot:

  This could happen if one of the substantive programmes is in conflict with the proper functioning of your computer. To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7 http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 article to start the computer to a normal startup.

  Method 2:

  I suggest you to download and install Microsoft Security essential and do a full scan.

  Microsoft Security Essentials

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials

  Note: It is possible that some data could be removed if infections are detected.

  For MSN related issues, I suggest you to contact MSN support.

  How to contact MSN customer service

  http://support.Microsoft.com/kb/940784

• Hi, I have a toshiba tecra 5000 I downloaded updates when they try the third phase of the update download the computer stops and restarts.

  I'm a newbie with this stuff so bear with me.  I updated charges, when they get to the third stage of the download the computer stops and restarts. I tried all types of restart, the system is unable to connect. now the hard drive light on the face of the computer won't lite, the laptop won't even consider itself restart any ideas

  Hello

  1. the updates you downloaded?

  2 a successful installation of updates?

   

  Follow these methods and check

   

  Method 1:  If you are still not able to start the desktop computer, you can rename pending.xml and check.
  Renaming or removing the pending.xml file booting from the Windows Vista disc.
  a. Insert the installation disc.
  b. restart your computer.
  c.Press any key to load the disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings.
  d. choose your language settings, and then click Next.
  e. in the System Recovery Options menu, click command prompt
  f. at a command prompt, type the following command below and press ENTER
  CD C:\windows\winsxs

  g. now, type ren pending.xml pending.old , and then press ENTER.
  Restart the computer and check.
   
   
  Method 2:  Once you are able to boot to the desktop, follow this method.
  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7:
  http://support.Microsoft.com/kb/949358
   
   
   
  Thank you

• My Vista computer has ceased to be able to print or use the windows photo gallery, or to be able to perform updates.

  Original title: non-functional computer

  my vista computer has ceased to be able to print or use the windows photo gallery, or to be able to run updates and I can't find any way to put this right - someone had something similar - it custom install service pack 2 for vista and it wont let me download a update Internet explorer 9 - also stop the program index - continues and the print spooler said it works but it doesn't will not print - any ideas?

  Hi John,.

  1. you receive messages or error codes when you try to print or to use the Windows Photo Gallery?

  2. What is the code of error or message that you receive when you try to install service pack 2 and Internet Explorer 9 download?

  3 did you recent hardware or changes to the software of the system?

  You try to perform a restore of the system to a restore point before you have been affected by the problem and check.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following articles:

  System restore

  System Restore: frequently asked questions

• My computer was not restart and I did a restore of the factory system, and it would not load the new screen?

  My computer has been restarted not and I have to click the button 3 or 4 times just so he can work. I use it for school so I really need to work and so I did the system back restore to the factory settings and it did again when the screen would not load but now it works. I left it only after I did 8 hours? that is the problem or do I do it again? I mean restoration?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if you can doot:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the verification and startup repair if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  It will be useful.