To control the shutter SC10

Similar Questions

• Frozen opening control and shutter button after the firmware update.

  I've updated my sony nex 6 to the latest version of the firmware 1.01. After that, I noticed sometimes my camera froze. The opening is indicated as - and the shutter button does nothing. I have to remove the battery and put it back to make it work again. Sometimes with my zeiss lens and more often with my goal of 18200LE. Not sure how to work around this problem and what is the problem. I've reached a point of almost fed up with my camera. Need help!

  The exact model is SEL24F18 zeiss 24mm f1.8 on the latest firmware. Camera and the lens are on the latest firmware. Sometimes, the camera shows the f-stop and I have to remove and replace the battery to operate.

• Volume up button does not work like the shutter of the camera

  I have an iPhone 5 with iOS 9.2.1 (13D 15). The volume up button does not work on it like a camera shutter. I think that it used for, and iPhone to my wife 6 with the same iOS version works fine. It is a problem, because I am using this phone with a stick of selfie, which triggers photos by simulating the volume press up button, so it doesn't work at all for me. The physical button works - I can control the volume with her settings. And when I try to use the stick selfie, I get the volume until the display on the phone, so I can see that the signal of the selfie stick is received correctly by the phone. And the stick of selfie works with my other phone that is not a problem with the volume up button.

  Work began after restarting the phone. So it's a bug to Apple report, the solution is to reboot the phone.

• order of the shutter with APT driver

  Hello

  I'm quite new to Labview. I want to remote control a SH1 shutter with controller of tsc001 within a Labview VI.

  I have seen that we can use activex objects to insert a driver APT in a Labview VI (thorlabs drivers for control of the movement, see http://www.thorlabs.com/images/TabImages/GuideToLabVIEWandAPT.pdf, and http://www.thorlabs.com/tutorials/APTProgramming.cfm). Unfortunately, there are a lot of activex objects (APT Chopper / laser / motor / tec controls) but not the order of the shutter I need.

  can someone help me please? Thank you very much

  Damiano

  Thorlabs gave me the answer, it's here if anyone should face the same problems: to communicate with a solenoid tsc001 control shutter use the activex MG17motor, instead of APTPZMotor. Then everything works perfectly.

  D

• Can you turn off the shutter sound on the factory unlocked iPhone to the Japan 7?

  Can you turn off the shutter sound on the factory unlocked iPhone to the Japan 7?

  I am going to Japan November 2016 and plan to buy unlocked (no sim) iphone to use in my country (Thailand) 7.

  However, I have read some post on 'mode of politeness' in Japanese phone but the conclusion is not clear whether you can disable shutter sound (without sim) unlocked iphone 7 or not. Then, someone could share on the current situation?

  Thank you

  No, its required by Japanese law shutter. Even if the iPhone is

  is no longer in Japan, you will not be able to turn off the shutter sound.

  You should also check with the seller to be sure you can get the

  iPhone unlocked from the Japanese wireless provider to use with your

  carrier in Thailand. And check that the iPhone is unlocked before leaving the

  retailer.

• How can I use my watch to snap the shutter on my iPhone?

  How can I use my watch to snap the shutter on my iPhone?

  Click here > https://help.apple.com/watch/

  Then click on: Remote Camera on the left.

  You'll see instructions.

• How to disable the shutter sound in the screenshot

  OSX El Capitan

  iMAC 27 inch Retina 5 k end of 2015

  Is there a way to disable / mute the shutter sound when you make a screenshot?

  Use the F10 key

• Cannot control the volume

  I have an Apple TV 4 (tvOS 9.2.1) with a Philips BDM4065UC 40 '' monitor (not TV) connected via HDMI. Everything works OK, except that I can't control the volume with the Apple Remote.

  In the volume control settings, I can choose between 'Auto', 'TV via IR' and 'Off '. Obviously 'Off' does not work. But not more than the other two.

  I asked Philips support if the BDM4065UC supports the HDMI-CEC, that I understand to be a sine qua non for Apple TV, and I'll make their response when I get it. However, I understand that the options 'Auto' and 'TV via IR' would not be displayed if HDMI-CEC was not taken in charge for the monitor.

  I can't form a new setting because the BDM4065UC is not a remote control to train with.

  I tried to use Apple's HDMI cable and the HDMI supplied with the BDM4065UC.

  Any thoughts?

  Steve

  I'm waiting for the volume of a computer screen (if it has speakers) to be flown by the device to which it is connected. The monitor is equipped with a remote control, otherwise I think he won't have the receivers to receive a signal from one.

• Why is it not possible to use SIRI on my apple TV remote to control the HomeKit products? I should be able to control all the devices with my Apple TV remote and SIRI HomeKit!

  Why is it not possible to use SIRI on my apple TV remote to control the HomeKit products? I should be able to control all the devices of HomeKit with my SIRI voice remote control and using Apple TV!

  If the new apple TV can act as a concentrator HomeKit and I use SIRI on my iPhone to control my locks, thermostat, lights, etc. Why am I not able to do the same thing with SIRI via voice commands on my Apple TV remote? When is this going to work?

  Also, when Apple will come out with a response to the echo of Amazon? I've tired to wait... do it already! If you build it, they will come...

  Thank you!

  This is a community to a user, and Apple will not see your rant. If you have suggestions about Apple TV, Siri and HomeKit the best thing to do is to submit your comments here. http://www.Apple.com/feedback/AppleTV.html

• How to control the rendering of the tab character in a TXT file?

  When I browse a TXT file, the tab character is rendered in order to look a lot like 8 places. Is there a way to control the apparent number of spaces in the rendering? Yes, I know that things like

                 pre { tab-size: 4 }
  

  in CSS3 could control this number in the rendering of HTML elements, but I want a control similar to a TXT file.

  Or if you want to use CSS, this bookmarklet will insert the style rule on the page:

  javascript:var r="pre{-moz-tab-size:4;}"; var s=document.createElement("style"); s.type="text/css"; s.appendChild(document.createTextNode(r)); document.body.appendChild(s); void 0;
  

  (Note that at least for now, you must prefix-moz - on the size of tabs in Firefox.)

• I want to open links, I click on to appear among the tabs at the end (to the right) of my browser. Is there a way to control the order of the tabs?

  I find it confusing that when I click on a link, the new tab for this link opens somewhere in the middle of my line of tabs. I would have preferred that the new tabs would appear and the (right) end of the alignment of the tab. I see no way to control the order of tabs in Firefox. Is there a way to accomplish what I want?

  Type of topic: config in the URL bar and press ENTER.

  Answer Yes.

  Filter = browser.tabs.insertRelatedAfterCurrent

  Double-click this preference to activate it false.

  Then restart Firefox.

• Cannot find view in the Application settings. You want to control the brightness.

  "Control the brightness of the screen on Firefox OS
  How can I control brightness manually or automatically?

  Adjust the brightness of the display using the display function in the settings app.

     Tap the Settings app and choose Display."
  

  Above are instructions for controlling the brightness in Foxfire. The settings application appears under Options and does ' t have display. I looking in the wrong place?

  Hi TheWeav, the article you mentioned is for the new phones of filed. Is your question about one of those or Firefox on your Windows XP system?

  Versions of Firefox for desktop computers do not have a brightness adjustment. You can adjust the brightness of your display using the global setting for Windows, which may include some special on your keyboard function keys or a Windows Control Panel.

  If you want only to adjust the brightness of the pages in Firefox - to moderate the white backgrounds, for example - you could try an add-on.

  • In this thread, the NoSquint extension suggested: How to change the brightness.
  • Several independently developed modules are marked with the keyword 'brightness' and might be worth a review: https://addons.mozilla.org/firefox/tag/brightness?platform=windows

  You can find a good solution?

• Controls the name of the file that results

  Is there a hidden way to control the file name from QTs made with compressor 4.2.2?  Specifically, I would like to remove the "-" between the name of the original file of the QT interval and the name in the annex of the compressor.

  Currently:

  "movie_100.mov" during the treatment with a custom preset called "_proprie" becomes "movie_100 - _custom.mov".

  I want the resulting name to be:

  movie_100_custom.mov

  Is it possible somehow?

  Thank you

  Hi Jesse.

  If you double-click in the file name field in the batch box to make it active, you should be about to remove the dashboard.

  Russ

• How can I control the list of the available in the message SSL Client Hello cipher suites? I want to ban the MD5 and RC4.

  How can I control the list of the available in the message SSL Client Hello cipher suites?
  I want to limit my browser to negotiate the cipher suites fort. I would like to prohibit, MD5 and RC4.

  Set the SSL3 preferences related to false on the subject: config page (filter: security.ssl3.).

  • http://KB.mozillazine.org/about:config

• Portege M750 - Volume knob does not control the sound

  Hello:

  Just made a new intall of Windows 7 (32 bit). Made from scracth with CD from Toshiba. The drivers that I downloaded from the site Web of Toshiba. Everything is ok, except the volume knob does not control the sound.

  Does anyone know driver I'm missing? All buttons and other functions are active except volume wheel.

  Hello

  Have you installed the VAP (value added package) for Win 7?
  EU from Toshiba are page pilot VAP v 1.2.40