CMD lost

Similar Questions

• ERRORLEVEL lost during the passage of new cmd.exe command

  Hello

  When I run the following commands in a command prompt errorlevel Windows 7 11 is returned:

  % ComSpec % /C "EXIT 11" & IF 1 EQU 2 DIR

  ECHO %ERRORLEVEL%

  11

  If I run the first command in a new cmd.exe I get errorlevel 0:

  % ComSpec % / c "% ComSpec % /C"EXIT 11"& IF 1 EQU 2 DIR"

  ECHO %ERRORLEVEL%

  0

  Why the two lines of command do not return the same errorlevel?

  Kind regards

  Michael

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Just lost hours of retouching accidentally hitting CMD-W?

  I worked on a project for 8 + hours and I accidentally hit CMD W instead of CMD S to save any changes in the scenario disappeared and I couldn't CONTROL Z it back... so am I screwed because of a simple mistake or I can get my calendar back? Help, please.

  Go in your project Panel and double-click your sequence to reopen in the timeline panel. Cmd - W is the shortcut to close a Panel. When you try to close the project, first always will ask you to register (if not already registered) before its closure.

• Disk space lost after the restoration of Bootcamp - El Capitan

  Hello

  I've created a Partition of Windows 49 GB using Bootcamp and then tried to restore the partition after. To restore the partition that I got a message error "your drive could not be restored to a single partition. Since then, I have "lost" the 49 GB of space.

  I checked the similar thread, but I'm not sure on what to do to fix this. Outputs of suggested controls are as follows:

  

  

  

  

  

  I can see on the screenshot on the bottom the 49GB, but do not know how to release.

  I tried running in Recovery Mode and diskutil repairDisk disk0 disk utility but this has not resolved.

  Any help would be appreciated!

  Thank you

  You will temporarily lose the HD recovery. Please backup OS X.

  1. merge the HD recovery in OS X. The order of the disk slices is essential in the following command.

  diskutil mergePartitions jhfs + "Macintosh HD" disk0s2 disk0s3

  2. in disk utility, expand the new OS X partition to cover the entire disc.

  3. re-install OS x and recover your Recovery HD.

  If you are comfortable with the Terminal commands, then

  1 backup OSX and all of your files - use Time Machine to back up or restore your Mac - Apple Support .

  2. boot into Internet recovery (CMD + Opt + R) - OS X: on OS X Recovery - Apple Support .

  3. click on Utilties-> disk utility and erase your entire internal drive.

  4. restoration of OSX and your files - use Time Machine to back up or restore your Mac - Apple Support .

  This requires another external drive that can accommodate TM backup - backup disks that you can use with Time Machine - Apple Support .

• Early 2011 MBP 15 "dual SSD - lost with boot camp edition

  Hello community!

  I lost my mind with boot camp troubleshooting during the last week. This is going to be confused reading, but I'm afraid I got worse... So please try to face me.

  Starting point - of course I can install Windows 10 on my MBP 2011 early!

  Material

  Early 2011 MBP 15 "with Intel HD 3000 and AMD Radeon HD 6750M

  and the optical drive, replaced by an other SSD with a caddy

  Of course, I didn't have an optical drive on the spot so I realized that I need to install to get the option to boot from USB - I did find. I managed to make a bootable USB from. ISO with UNETBOOTIN. First of all, I got score of huge problems with that I finally managed to Dodge with diskpart - software on Windows Installer USB after NVRAM reset before each attempt to install with CMD + Option + P + R, I had to also remove the OSX SSD during the installation of VICTORY for everything the world some boring as Windows could not update the configuration to start the computer. Unable to continue installation -problem.

  After all:

  -> I managed to install WIN10 on my MBP education

  -> A lot of festivities fun! < 3

  -> After installing the bootcamp drivers all active windows went to "invisible desktop on the left" (I closed the other workstations...) where I managed to lift one of the windows on the central office with lucky and "move" action (I have no idea...)

  -> after reboot apparently drivers Intel HD 3000 went haywire and I got black screen on black with details in black (black screen Uni)

  Conclusion: I try Windows 8.1 (pro) because at least he is supported by my Mac AND it has same installation and should work.

  At one point I tried to use my old drive via USB to install Windows 7 and 8.1 pro

  -> PROBLEM CDBOOT: couldn't find the BOOTMGR

  -> I moved along back USB and WIN8.1

  8.1 Windows Pro was installed easily, with the same procedure. When running boot camp display drivers turns black during the "Intel - graphic" installation period. I can confirmed that starting mode safe mode when the screen works, but I can't install Catalyst drivers-> so I can not play games that was the only reason for dual boot. In addition, there is no sound. So lack of drivers: no picture, no sound.

  There... I think I forgot to say something. I was hoping just that if someone could help me with this problem. I lose my head here. I have not really direction where to go next, but I have a few options I can try after that I understand my morale of my troops.

  1. Remove my boot OS X SSD, switch my SSD Windows instead of him and put my Superdrive. So I would basically just install windows. Earlier, I had 8 windows work via the DVD and bootcamp.
  2. Try to play with the drivers on Win8.1 more
  3. Reinstall windows. There may be something wrong with my. ISO or USB?
  4. Delete the EFI to correct CDBOOT?

  Thank you in advance!

  You must use Bootcamp Assistant for everything, including the form/partitioning implementation and the removal of partitions...

  I would like to reformat the second SSD (on which should be installed W10) with diskUtility. Then start bootcampassistant on SSD1 and do all this.

• CMD d (insert new bookmarklet) is GONE... some add-on has messed up itup

  Hello:

  Ive been adding a lot of new add-on during the Christmas period.
  now lost my favorite SHORTCUT

  CMD-D to add new bookmark

  How can I get that back?

  Now, what does Cmd + D?

  You will need to check which the extension took this shortcut if you can't find it.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  If it works in Firefox Safe mode and then disable all extensions (Tools > Modules > Extensions) and then try to find out who is causing by allowing an extension at a time until the problem reappears.

  Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

• I lost the bar at the top of the screen, tools, edit, Favorites, tools, help view, historical, how do I get it

  Hi, I lost the bar at the top of the screen, which has file, edit, view, Favorites, tools, help, history, how can I get this back please, will be br gratefull fo all the answers.

  Press the Alt (Cmd for Mac) key to display the Menu bar, then open view > toolbars and select menu bar, so it has a check mark.

• Files missing after moving iMovie events from local disk to external HARD disk. Are they lost?

  Hi all

  Tonight, I tried to clear up little space on my local HARD drive and wanted to spend my events/projects of the iMovie local library to an external HARD disk, which I connected via firewire 800.

  I opened iMovie (v10.1 - current version with all updates installed). I clicked on an event to highlight and then the FILE--> COPY OF LIBRARY of selected EVENTS.

  There, I sailed on the external drive and created an iMovie new library called ReWatch2015. I copied successfully eight different events, including files from my external hard drive.

  The ultimate goal is to get rid of them on the HARD drive internal, I highlighted the 20 remaining events I wanted to move and then used the FILE--> MOVE of EVENTS at the LIBRARY and specified ReGen_2015.

  It seemed at first glance to move. In fact, he seemed to move too darn fast in my opinion. When I looked at home in the library of the external drive, they were nothing more than a string of question marks, with a message telling me that particular item is not found and re-import the original clips. It's impossible because I have not kept the original source material on my internal drive. I had asked before if they are preserved in the library of iMovie and told me Yes, so I that's why I deleted the original source material.

  Don't see no activity on the disks, I did the cmd - Z to go back. Events have now shown upward into the iMovie library internal. HOWEVER, they still have the question mark, with msg on reimport. What is scary, is that if I go to ALL projects of them have visible thumbnails. Yet, when I click on any of these thumbnails to load the project into the editor, I am back to the page of question mark again.

  Are the file on drive HARD internal, and they just disassociated projects, or two-thirds of my library of events of 2015 are now toast? I was not under any type of backup Time Machine to be able to recover them, and frankly, if they left, it is not the end of the world since I was of the .mp4 displayed on Vimeo. But, I would just assume the iMovie library intact if possible.

  Suggestions on how to recover are greatly appreciated!

  Robert

  Hi Robert

  Am having exactly the same problem on a new iMac 2016 running El Capitan: when I want to MOVE events such as you describe it, they sometimes get lost in the original library, both in the target library. Like you, I noticed that a such attempt to move just a very short time even if several GB of data play a role. Sometimes however, iMovie is able to move successfully. I my case, I had to re - import events so lost since an additional backup, I got on another external drive that I couldn't find the clips 'lost' on the HARD drive more. Very scary!

  I think it's an iMovie/El Capitan question which could be corrected with future updates. The only solution I've found is to the events of the FIRST COPY, and then check if the target is really OK and only then select the MOVE option, which will remove the original library to free up space. In addition, I plan to copy on a regular basis my library full iMovie on an extra disk to backup using the finder.

  Did you find anything in the meantime?

  Morgy

• can not update; "" Windows or windows defender ' more and I lost my; "' help and support ' file system on startup. Need help to get all that, please.

  I can't update "windows" or "windows defender". Followed the steps described by Microsoft help, tried to download manually, have asked Microsoft to help (no response yet) these first two things didn't work. I even had something like; change setting.that message security came for "Windows update", I have change the security setting, did not just well, still nothing.
  Windows Defender gives me an error code that looks like this;
  Error Code 0 x 80070005
  That's all I can get, and it will not update.
  and on top of it, I've lost my "Microsoft Help and support (it) when I click Start and click Help and support, I get a (?) all help options or when I click on it nothing there is totally 'empty '.
  I have one more problem.
  I tried to defrag my computer, and I can't do it either. I get a grey screen and if I click on anylise or defragment, it does nothing, no error message or anything else. Tried to manually defragment Traore does not work, tried to load a defrag on the web program, wouldn't let me load it.
  Nobody knows what happens here? why I'm having these problems all of a sudden? I do nothing but send E-mails and read my emails and I do not browse the internet or enter sites that are safer. So, what can I do? How to make everything return to normal? can someone help me with this?
  Also let me tell you right now, I'm not an expert on how to do things on the computer, so I'm scitish when it receives or sounds complicated. I don't want to lose my entire system because of these unfortenate none of the work programmes.

  Hello shessy49, welcome.

  I would recommend that we run a SFC (System File Checker) first scan to see what he finds. Try this:

  1. click on START
  2 type "msconfig" (without the quotes) and press enter
  3. go to the "Startup" tab and uncheck all the entries displayed
  4. click on 'Apply' at the bottom right
  5 restart your computer

  ---
  After the reboot
  ---

  1. click on START
  2. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.
  3. type "sfc/scannow" (without the quotes) and press enter

  If the question started very recently, you can try a system restore:

  1. click on START
  2. click on "all programs".
  3. click on "Accessories".
  4. click on "system tools."
  5. click on "system restore."

  6 follow the prompts shown to restore your system to a date before the problem started. Although the system restore does not target the personal data, it is recommended that you back up all data such as music, photos and documents in case something is not bad.

  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unknow administrator created, whereby I lost my administrative privileges

  Original title: Unknow administrator created,.

  I have an account administrator created without my knowledge in the computer, thanks to which I lost my administrative privileges. When I log in in safe mode, I see the administrative account and my account. But when I log into normal account I can't and it takes me directly on the desktop. In normal mode, I can not see the information system and cannot see the control panel. An error message appears and says "please contact your system administrator. But when I log in safe mode and the account administrator I can see table control and information system. I want to get my loss of administrative privileges. Please do what is necessary...

  First of all, make sure that you really have lost your administrator privileges.

  Open a command prompt window:

  Start-> Run-> "cmd".

  then enter the command:

  net localgroup administrators

  This will give you a list of all users with administrator privileges.  If you open a session name is on the list, then you do not have administrative privileges and your problem is probably a corrupt user profile.  If it is not on the list, you can put it back on by opening a session as administrator (in SafeMode as before), bring up the command prompt window, then type in the command:

  net localgroup administrators username / add

  where you replace "username" with your own username to login.  This will add you back as an administrator.

  If your problem was a damaged user profile, try the following:

  "How to recover damaged Windows XP user profile"

  <>http://support.Microsoft.com/kb/555473/en-us >

  HTH,

  JW

• lost my card character, not in the system 32 folder, how can I get that back?

  lost my card character, not in the system 32 folder, how can I get that back?

  lost my card character, not in the system 32 folder, how can I get that back?

  It's a pretty good trick, considering that charmap.exe is one of the files that Windows File Protection is supposed to protect.

  Do a full disc search for charmap (without extension), making sure to look into the hidden files and system.

  If charmap.exe is not in C:\Windows\system32 (where it belongs), he probably is not in C:\Windows\system32\dllcache (where it also belongs).

  If you have a directory (which is common for systems with Windows) C:\i386 pre-installed, you should find charmap.ex_, which is a compressed version of the file.  You must use the EXPAND command from a command prompt window (start > run > cmd > OK) to decompress:

  Expand c:\i386\charmap.ex_ c:\windows\system32\charmap.exe
  copy c:\windows\system32\charmap.exe c:\windows\system32\dllcache

  Don't forget the space before the c:\ at two locations in two lines

  You will also find the charmap help files in C:\i386 and can expand those as well if necessary.  The expanded files should reside in C:\windows\help

• Entry of "missing; RunDLLEntry"but lost disc cuz KatrinaPLEASE help :-) How to replace?

  We put things in stock when we moved a little after that Katrina.My Win XP disc was in there. Aftr move I couldn't afford 2 pay 4 storage and things lost in the units. How can I download the file or get the disc? The computer works, but slow. It was beautiful, but then 'missing entry C:\WINDOWS\System32\Spool\DRIVERS\W32X86\3\DLCGtime.dll; RunDLLEntry"began coming all of a sudden when I start. Can U help please? I would be grateful. Thank you :-) I got aprciate! E-mail Anne * address email is removed from the privacy *

  Hello

  1. don't you make changes on the computer before this problem?

  2. What is the full and exact error message?

  You may contact this online storage support team to recover these files.

  Step 1: Try the steps below to fix the dll error message:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, type the following line and press ENTER:
  regsvr32 DLCGtime.dll

  Step 2: You can also try the SFC scan currently running on the computer and check.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.

  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, the following line, and then press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  See the bottom of the articles that might help you improve the performance of the computer.
  How to make a computer faster: 6 ways to speed up your PC
  http://www.Microsoft.com/atwork/maintenance/speed.aspx
  Slow PC? Optimize your computer for peak performance
  http://www.Microsoft.com/athome/Setup/optimize.aspx

• Positions lost during the shutdown desktop icon

  The positions of the icon on my desktop are lost each time that I reboot so everything ends in a jumble on the left side of the screen.  In the control panel under Options, display - the "Remember each folder view setting" option is checked if this should not happen. I am running Vista. Sites online support suggests to change the registry, but does not provide any instruction on how to do it. What can I do?

  Make the folder and Menu settings.

  Explorer

  Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

   

  To see if a fix is available

  In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution.

  You can also right-click and choose Details for more information. Post these details here. The name of the Module fault is important information.

  If the problem affects Panel press the Windows key + R and type wercon (or type it at a command prompt).

   

  Close the browser and start a command prompt

  • Close Windows Explorer
  • Start - All Programs - Accessories - right on command prompt and choose run as administrator.
  • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
  • Press Ctrl + Alt + Delete then Task Manager.
  • Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.

  Then to restart the Explorer after trying all of the following

  • Press Ctrl + Alt + Delete and choose Task Manager
  • In the Task Manager, click the file menu and then click new task (run) and enter explorer

   

  If you cannot start the Explorer at all

  • Press Ctrl + Alt + Delete and choose Task Manager
  • Under the processes tab, click Show processes from all users to elevate to administrator
  • In the Task Manager, click the file menu and then click new task (run) and type cmd
  • Other things you can try typing
    

    Explorer
    Explorer c:\
    Explorer/e, c:\
    wercon
    control
    Iexplore
    Rstrui

  If you cannot start a folder window you can use the Browse button in the new task dialog. Don't forget that you must right click and choose Open rather than double-clicking.

   

  Reregister the shell registry entries

  It is important that each order is accepted. If the command fails it means the file is damaged and must be repaired.

  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  regsvr32 /i shell32
  regsvr32 /i urlmon.dll
  regsvr32 RPCRT4.dll
  regsvr32 PROPSYS.dll
  regsvr32 MSCTF.dll
  regsvr32 cscui.dll
  regsvr32 rsaenh.dll
  regsvr32 timedate.cpl
  regsvr32 ATL DLL
  regsvr32 OLEACC.dll
  regsvr32 actxprxy.dll
  regsvr32 USERENV.dll
  regsvr32 msshsq.dll
  regsvr32 NaturalLanguage6.dll
  regsvr32 thumbcache.dll
  regsvr32 WINTRUST.dll
  regsvr32 MMDevAPI.DLL
  regsvr32 audioses.dll
  regsvr32 audioeng.dll
  regsvr32 ExplorerFrame.dll
  regsvr32 msi.dll
  regsvr32 FirewallAPI.dll
  regsvr32 netshell.dll
  regsvr32 pnidui.dll
  regsvr32 QUtil.dll

  
  regsvr32 c:\windows\system32\wpdshserviceobj.dll
  regsvr32 WINHTTP.dll
  regsvr32 C:\windows\system32\qagent.dll
  regsvr32 C:\windows\system32\portabledeviceapi.dll
  regsvr32 wbemprox.dll
  regsvr32 wbemsvc.dll
  regsvr32 fastprox.dll
  regsvr32 imapi2.dll
  regsvr32 wshext.dll
  regsvr32 gameux.dll
  regsvr32 msxml6.dll
  regsvr32 vbscript.dll
  regsvr32 jscript.dll
  regsvr32 wshext.dll
  regsvr32 wshom.ocx
  regsvr32 wshcon.dll
  regsvr32 scrrun.dll
   

  Delete the folder and the settings of the Menu

  This will remove the settings are saved for each file that you visit. Also the order of the start menu.

  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  Reg delete "HKCU\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StuckRects2" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\MenuOrder" /f

  Delete the thumbnail and icon Caches

  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  attrib - r s h '% userprofile%\AppData\Local\*.db '.

  attrib - r s h '% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db '.

  del "% userprofile%\AppData\Local\*.db".

  del "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db".

  Disable thumbnails and previews

  Damaged documents and particularly corrupt pictures or videos, can cause Explorer crash all trying to generate a thumbnail or an overview. This miniature and previews active option off.

  If you can start the Explorer, previews is Union on the command - folder and Search Options - framework of tasks use classic Windows foldersbar.

  Thumbnails are organized on the command bar - folder and Search Options - view tab - and check under Advanced settings - always show icons, never thumbnails and uncheck Show icon file in the pictures.

  If you cannot start the Explorer close Explorer as above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000001 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000000 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000000 f

  Turn around after testing the Explorer.

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000000 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000001 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000001 f

   

  A boot is a way to explore

  It can be caused by a shell extension.

  Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

  The Explorer is built on addin programs called Extensions of Shell. The standard is provided by Microsoft, but programs add their own.

  • Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
  • Close Windows Explorer
  • Start Autoruns by right-clicking and choose run as administrator
  • Click on the menu Options - Filter Options and check hide Microsoft entries and disable include empty locations
  • Go to the Explorer tab and uncheck everything to the left.
  • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
  • Press Ctrl + Alt + Delete and choose Task Manager.  Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
  • Click the file menu and then click new task (run) and enter explorer

  If this can help, reactivate ½ at a time to identify those who. If this does not help, restart AutoRuns and go to the all tab and uncheck everything that it and restart. If this can help, reactivate ½ at a time to identify those who.

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see problems explore

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  Recycle Bin
   
  If the problem is the trash bin remove the storage folders. It will be automatically re-created next time you delete a file or open the Recycle Bin. It will remove the trash and the files it contains for all users.
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
   

  RD C:\$RECYCLE. BIN/s/q

   
  then repeat for each drive to change the drive letter, for example
   

  d:\$recycle Rd. BIN/s/q

   

  e:\$recycle Rd. BIN/s/q

   
   
  If the Office does not start
   
  This will create a new empty by user and common desktop computer. This will allow to test if a file on your desktop to start the Explorer.
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
   

  MD "% userprofile%\DesktopTest".

   

  Add reg "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% USERPROFILE%\DesktopTest" /f

   

  MD "% public%\desktopTest".

   

  Tracking Add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" v "Common Desktop" REG_EXPAND_SZ /d "% Public%\DesktopTest" t f

   
  To restore default after having tested if begins to explore.
   

  Set ExpFix1 = % user

   

  Set ExpFix2 = % profile

   

  reg add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/f

   

  Set ExpFix1 = % Pub

   

  Set ExpFix2 = % lic

   

  reg add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v "Common Desktop" /t REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/f

   
  You will need to disconnect then.
   
   

  New entry missing folder

   

  If the above does not help.

   

  Download NewFolder.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121.

   

  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the NewFolder.reg.

    

• How to remove Windows PowerShell 2.0, while all my update lists are lost?

  Hello

  I'm terriblely sorry that I am a Chinese, as China MS can not solve the problem, I ask you for help.

  All my lists update are lost, this means while I opened the update of lists, it's empty, but all my updates are installed on the computer.

  If I can't remove Windows PowerShell, I can not test compatibility of Vista so I can't use the upgrade to repair the operating system.

  Thank you, if you can help, I know how to use CMD to delete PowerShell 1.0 but it cannot be used for 2.0 and msicuu2 cannot remove updates, if using the MS means do not work, I hope you can tell me how to use software from other producers to remove Windows PowerShell 2.0.

  Thanks again.

  Unless you format the drive HARD and then do a clean install of Vista & then get SP2 installed to switch to Win7, your best bet would be a fresh install of Win7.

  In other words, the presence of Windows PowerShell 2.0 isn't your problem - a system infected with hijackware is your problem.

• Xmas lost password help

  I was preparing my old but in good condition the HP Media Center M7070n for a family in need for Christmas. I had pages of notes, password, etc, but my husband has moved the computer & lost the paperwork.  He struggles with the TV remote, so there is no hope of fimding papers.  Several weeks ago, I don't remember the password.  What should I do to participate?  It is so old, that I can not find the recovery disks, either I did in 2005.
  If I can not log on: how to access drive D and I can hard drive bands? Is there a link that will tell me what to download? Since it's 2005, is 32-bit or 64-bit?  How would I tell?  Please send help quickly, Christmas is coming & this GOOSE is cooked alread!

  After more to search here - I'll try the cmd Mode safe thing followed by the password recovery key of the trial Sunday. My fingers are crossed.