Code 43 and wifi adapter does not

Similar Questions

• Laptop HP Pavillion 15-n003T: WiFi adapter does not

  My wifi has suddenly been turned off and now it does not. When I troubleshoot it shows an error "there could be a problem with the driver for the wireless adapter. Windows could not automatically bind the Protocol IP on the network card stack. »
  Help, please!

  Hey @Nidhi_Verma,.

  Welcome to the Forums of HP Support! This is a great question other clients may also wonder; Please click the accept as a Solution, if you feel helps you to this post, or could help others.

  My first suggestion would be to use the wireless network troubleshooting and Internet tool. At the bottom it will ask you questions to help you diagnose the problem.

  Have you tried to restore the BIOS?

  How long it has spent for?

  Have you tried to do a system restore to a time when there is no present problem?

  I understand that you receive an error message that says: "there could be a problem with the driver for the adapter Wi - Fi. Windows could not automatically bind the Protocol IP on the network card stack. »

  Please try to uninstall the driver in Device Manager by using the following steps:

  • Go to the Device Manager.
  • Expand network adapters.
  • Right-click on all NICs individually.
  • Click on uninstall.
  • Restart the laptop twice.

  If so far, none of these steps have helped, I suggest that you take a look at the document troubleshooting wireless network and Internet and follow each step from end to end.

  Please use the HP Support Assistant network diagnostics or tool Internet and Windows network and if you need help, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems. Please remember that you can show your appreciation by clicking thumbs-up.

  Thank you!

• WiFi adapter does not work correctly

  I want HP 4-1204TX with Windows 8 operating system and I always had the same problem with the connection using my wifi adapter. When I opened the Device Manager to search for the status of the wifi card, it says my "ralink RT3290 802.11bgn"... ". "Microsoft Wi - Fi Direct virtual adapter"... everything has the same error code which is Code 45.

  How can I solve this problem?

  Hi @FLFOO ,

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question on your HP ENVY 4-1204tx Ultrabook and issues with WiFi adapter is not working properly. Error codes in the Device Manager in Windows 8.1 could be fixed by removing any additional drivers. So I want to uninstall everything that is listed in the network drivers in Device Manager, reboot the laptop. Here is a list of the options in the Device Manager, it might help.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that requires an upgrade or reinstall.

  I hope this helps.

  Thank you.

• WIFI adapter does not work and can not be detected

  Hi guys,.

  I use HP Pavilion Dv4 3106tx. I don't know what happened, but out of no where my wifi sort adapter stopped working. whenever I have activate my wifi button, bluetooth doesn't work and does not display the icon of wifi which usually shows at the bottom right of the taskbar. I also checked Device Manager > network adapters, the wifi card is not there. I also tried "Search the hardware changes", but still there is not Wifi adapter appears.

  Right now I'm just connect via ethernet for internet connection because my wifi does not work.

  Can you help me out here guys...

  Thank you!

  Hi @pooroontong

  Welcome to the Forums of HP Support!

  I understand that your wireless network is most obvious in your systray or in Device Manager. I'm happy to help you.

  The first thing to do is to take a look at this page which deals with the problem you describe. Try it and let me know if you need help most.

  Universal solution WLAN, Wireless and Wi - Fi errors

• M70: WiFi adapter does not connect to the wifi Lan

  Hello
  I have the Satellite M70-122 with an Intel PRO set wireless adapter 2200BG Driver version 9.0.2.25. ConfigFree radar screen correctly identifies the wifi router of my Motorola, but when I click on and get the router on the icon of the laptop, no connection is established and there is a message that says:
  "Sell another application is controlling the wireless card."

  I disabled the "use Windows to configure my wireless" box under settings to connect wireless but no luck.

  In addition, there is no wifi adapter icon in the status bar, or I can get to a window with the settings of the adapter to enter the SSID and WEP details.

  Any help will be appreciated.

  Hello

  Have you used a tool of connectivity like Atheros WLan client utility?
  On WEP:
  PC card encryption is hardware specific. Maybe if it of not possible to use WEP encryption, because the card doesn t that supports.

  Please also see this page:
  http://support.Intel.com/support/wireless/WLAN/pro2200bg/index.htm

  Good bye

• HP 15-f039wm: Re: qualcomm-atheros wifi adapter does not work with windows 8

  Hello HP support.

  I have a HP 15-f039wm, product J8X12UA #ABA, running Windows 8.1.  I like it, but I thought I could improve it by upgrading to 8 GB, installation of a 240 GB SSD and move the 500 GB HARD disk to an external USB adapter.  So far, so good, so very jolly good.

  I also wanted to upgrade the Wi - Fi adapter to a faster power adapter with Bluetooth 4.0, but instead to get the AC7260 from Intel, I settled for a Qualcomm Atheros AR9485 with the Bluetooth BT3012 device, which belongs to a HP, I think.

  I shouldn't have paid.  Too late, I learned that the Atheros AR9485 has major compatibility problems.  Microsoft compatibility survey shows that some 530 speakers, 357 note as incompatible AR9485.

  This pair Bluetooth adapter and connects with my cell phone, but it remains connected for less than a minute before it disconnects.  It does not connect with something else I have.  It does not recognize my Bluetooth phone earpiece, and he recognizes that rarely my Bluetooth keyboard, with which it will pair but it never connects.

  The keyboard is a deal breaker - a must - have - and something really nice.  I tried the same Bluetooth keyboard sold by comb and Arteck jelly and a similar one by the EC technology, which has the top two rows of keys merged into one.  They connect immediately with an IPhone 4, but none of the three would be in contact with the BT3012 in my HP 15 - f039wm.

  Microsoft recommends the most recent drivers as a fix for incompatibility issues.  I downloaded the NIC drivers and card with Bluetooth Bluetooth drivers for the AR9485/BT3012 of http://www.station-drivers.com .  That updated the Qualcomm Bluetooth driver version 8.0.1.273, date from mid-2013, that came with the BT3012 (AR9485) Microsoft version of the driver 8.0.1.344 card, day 23/04/15.  Even still, it connects to my cell phone but nothing else.

  "Allow Windows to turn off this device to save power" is not checked for the adapter.  I also ran the 'netsh' command to clear the TCP/IP stack and reset the Winsock Catalog.  I have no intend to restore Windows to the factory; before that I would, I would get the Intel AC7260 more expensive card - that I probably do anyway, given the record of the incompatibility of the Qualcomm Atheros AR9485/BT3012.  I do not expect to change this folder, no matter what I do.

  But I'm open to suggestions.

  Thank you in advance for taking the time to investigate this problem.

  Hi @gospelmidi,

  Thank you for your inquiry.

  I take that you have swapped the hard drive and replaced the original card wireless and Bluetooth with the Qualcomm Atheros AR9485 with the Bluetooth BT3012 device and cannot associate with something other than your cell phone.  You tried to reset the TCP/IP stack, but there was no change.

  Did you run HP Support Assistant to ensure you have all the updates from HP?

  Have you tried to run the troubleshooter in Windows?

  Alternatively, you can try the following steps.

  Step 1. Go to Device Manager
  Step 2. Right click on "Bluetooth device" you want
  Step 3. Select "update driver software... »
  Step 4. Choose "Browse my computer for driver software".
  Step 5. Choose "Let Me pick from a list of drivers for devices on my computer.
  Step 6. Select "Ports (COM & LPT)"
  Step 7. Select "Microsoft" to the list of "manufacturers".
  Step 8. Finally select "Standard series via a Bluetooth connection.

  If you are unable to connect to a Bluetooth device, try the following:

  Step 1. Search for 'Change device' in the start menu in Windows 8.
  Step 2. Click on where it says change device installation settings.
  Step 3. Select No, let me choose what to do option.
  Step 4. Check the automatically get the device app option
  Step 5. Click on save changes to save the settings that you select

  So, you can try this

  Step 1: Go to RUN (Windows Logo + R) and type "services.msc" and Enter
  Step 2: Now find 'Bluetooth Support Service' and double click it
  Step 3: Now click on the Log on tab and type "Local Service" without the quotes
  Step 4. Click on "account".
  Step 5: Now remove any authorization of passwords the password field blank
  Step 6: Below the upper left title should be a hyperlink 'Start' click

  If the problem here is a link to HP 15 Notebook PC Maintenance and Service of Guide for your laptop.  Please note Chapter 3, page 17, section 17 for recommended replacement cards.

  To say thank you for answering, please click on the thumbs up icon below.

  If this fixes your problems please let know in choosing the solution to other people.

  Good luck!

• WiFi adapter does not light

  recently my wifi adapter just stopped turning, the small white light is from the key on the keyboard, when I press on it is no longer lights up like it used to if I accidentally pressed it. There's just red. I tried to restore my computer to an earlier point like the computer suggested (as a month earlier) but still no luck. Other devices in my House still not connected to the internet, so I know it still works, and when I plug it using an ethernet cable, it connects (what I'm using now) but I would like to be able to walk away, please help!
  systems

  HP Pavilion dm4

  Intel core i5
  Windows 7

  Hi ellstray,

  Follow the steps in The HP supporttroubleshooting. If you are unable to activate the wireless card, it may need to be replaced.

• Atheros AR9285 802.11b/g/n WiFi Adapter does not connect.

  I have a HP DV6 3049tx windows 7 64-bit, which have an integrated Atheros AR9285 802.11b/g/n WiFi Adapter of the for 1 month I am not able to connect to any network if a list of available wireless networks. the error msg that says is Windows is not wheat to connect to the network. My version of the driver is 8.0.0.238. What can be the solution Please HELP!

  Hello harshsinha,

  Take a look at this page http://goo.gl/7sjsm

  All drivers and updates are found on this page. Check inside the Networking section and you will see an Atheros driver

  This document here http://goo.gl/Vnwiu will give a few wireless troubleshooting steps that will help.

  Please let me know if this helps solve your problems.

• Internal Wifi adapter does not work after the upgrade to Windows 8.

  Title original-wlan-disabled

  I have a hp pavilion g6 and I installed windows 8 pro and since then my internal wifi adapter has been disconnected for a moment I have no wlan

  Method one worked great for me, thanks!

• WiFi adapter does not work

  adapter WiFi shows no available networks. I tried the system restore, but it did not work. I tried updates and that didn't work either. the adapter is ralink rt5390.
  This is a link to my features to laptops
  http://support.HP.com/us-en/document/c03136241

  I have reviewed the linked thread and it seems that the Microsoft experts provide assistance.  For after all this mentioned in the other thread, I perform a recovery and upgrade of Windows 8 again.  How the system has been upgraded to Windows 8 (on-site upgrade or a clean install)?  It would be an option of your time, but the problem seems to have returned and it not be resolved by the same steps it is already resolved.

  Microsoft experts are asking for minidump files and not to necessarily show.  Ubuntu is Linux-based and minidumps of Windows is not supported natively.  A special program is needed to view them.  I am sure that the experts have a program that can display them as long as they have access to the minidumps.

  In Ubuntu, you would access the material where the Windows folder is located.  In the Windows folder, there is a minidump folder.  By default, this is where the minidumps.  Access these files and then download or share them with the experts in the Councils of Microsoft.  Once they have access to them, they will be able to analyze them to provide responses more details.

• Using fault-political with the Ombudsman and db adapter does not work

  Help, please! I am stuck on this during 2 days...

  Hi friends.

  In my project I am trying to give a treatment with the exception of a db adapter executes a pl/sql procedure.

  I'm forcing a raise_application_error in the procedure to handle the exception, and I would fault the police to treat it as "action man".

  The db adapter is wired to a mediator:

  JMS-service-> Ombudsman-> db Jca adapter

  When I'm with the exception of the log says:

  9d8bff56a1 due to: LINK. JCA-12563 []

  Exception occurred when the link was invoked.

  Exception occurred during invocation of the JCA binding: "JCA binding run operations reference 'PersistirODS' has no reason to: stored procedure call error.»

  Error trying to prepare and execute the FORNECEDOR. UPSERTFORNECEDOR API.

  There is an error occurred so that the preparation and execution of the FORNECEDOR. UPSERTFORNECEDOR API. Cause: java.sql.SQLException: ORA-20101: Deu Merda

  ORA-06512: at the 'FORNECEDOR. UPSERTFORNECEDOR', line 405

  ORA-06512: at line 1

  Make sure that the API is defined in the database and that the settings match the signature of the API.  This exception is considered non reproducible, probably due to an error of modeling.  To be classified as reproducible to the contrary to add property nonRetriableErrorCodes with the value "-20101" to your deployment descriptor (i.e. weblogic - RA.Xml).  Auto retry a reproducible fault set composite.xml for this invoke these properties: jca.retry.interval, jca.retry.count and jca.retry.backoff.  All properties are integers.

  ".

  The called JCA adapter threw an exception of resource.

  Please review the error message above carefully to determine a resolution.

  ]]

  and then it looks like it tries to run police of fault, but it says:

  [2014 04-10 T 20: 01:39.667 - 03:00] [AdminServer] [WARNING] [] [oracle.integration.platform.faulthandling] [tid: Workmanager:, Version: 0, scheduled = false, started = false, queue time: 0 ms\n] [userId: weblogic] [ecid: 11d1def534ea1be0:-1fa77a00:145468d59e7: - 8000 - 000000000002801 a, 0] [APP: soa-infra] [RejectedMsgHandling] Impossible to enforce policies on the message rejected with id - 60046 []

  oracle.fabric.common.FabricException: cannot resolve the link to a fault policy [blamed the activity details:]

  Name of activity = null

  The activity Id = null

  Activity lineNumber = null

  Reference name = null

  WsdlLocation = null

  ActivityType = null

  ]

  Here are my files fault-policies and fault-links:

  <? XML version = "1.0" encoding = "UTF-8"? >

  " < faultPolicyBindings xmlns: xsi =" http://www.w3.org/2001/XMLSchema-instance "

  " xsi: schemaLocation =" " http://schemas.Oracle.com/BPEL/faultpolicy .. / xsd/FaultBindings.xsd '

                       xmlns=" http://schemas.Oracle.com/BPEL/faultpolicy "> "

  < faultPolicy composite = "political malpractice" / >

  < / faultPolicyBindings >

  <? XML version = "1.0" encoding = "UTF-8"? >

  " < faultPolicies xmlns: xsi =" http://www.w3.org/2001/XMLSchema-instance "

  " xsi: schemaLocation =" " http://schemas.Oracle.com/BPEL/faultpolicy .. / xsd/FaultPolicies.xsd '

                 xmlns=" http://schemas.Oracle.com/BPEL/faultpolicy "> "

  < faultPolicy id = "political malpractice" >

  < condition >

  " < faultName = xmlns:medns ' http://schemas.Oracle.com/mediator/faults "" "

  name = "medns:mediatorFault" >

  < condition >

  < Ref action = "by default-human-intervention" / >

  < / condition >

  < / faultName >

  " < faultName = xmlns:rjm ' http://schemas.Oracle.com/SCA/rejectedmessages "name ="rjm:PersistirODS"> "

  < condition >

  < Ref action = "by default-human-intervention" / >

  < / condition >

  < / faultName >

  < faultName >

  < condition >

  < Ref action = "by default-human-intervention" / >

  < / condition >

  < / faultName >

  < / conditions >

  < action >

  < Code action = "by default-human-intervention" >

  < humanIntervention / >

  < / action >

  < / actions >

  < / faultPolicy >

  < / faultPolicies >

  Once again

  Help, please! I am stuck on this during 2 days...

  Guys... My fault...

  Just changed from parallel sequencial and it worked...

• Set up freshly - WIFI system does not

  Hey there,

  After some virus problems, I set my system, formatting the hard drive and reinstall Windows. I also downloaded the update of the Lenovo system, all installed updates and downloaded the center of Solution ThinkVantage. Now the PC is working again BUT the WiFi adapter does not work. It seems to be non-existent, if I press F9 it says I'm supposed to press the switch of hardware. I have a ThinkPad Edge 15, there no such a change at all.

  In the hardware Manager I find a network driver device, so I guess that's it. However, no driver seems to work. I downloaded the dirver (s) of WiFi on the Lenovo site and install, nothing happens. What can I do?

  Here is my card:

  -Thinkpad Edge 15

  -Windows 7 Home Premium (OEM)

  -the driver I installed that did not work: Intel Wireless LAN (bg, abg, abgn) for Windows 7 (32 bit, 64 bit), XP - ThinkPad

  Thank you in advance for help you! I am fairly certain that the works of material, before I set uo the WiFi system was not at all a problem.

  Best wishes

  Tobias

  
  

• WiFi and apple tv does not connect for Colocation

  WiFi and apple tv does not connect for home sharing

  Please give more details about your configuration, the version of the Apple TV and software, home sharing server, etc. Others here know much more about it as I have, but they will need a clear description of the problem. You can also try to search for this site for home, sharing problems and take a look at any recent threads that you present to.

  You use the same Apple ID everywhere? ATV currently sems to have problems with Apple improved authentication protocols, so I hope they are not turned on for your Apple ID. You have enabled sharing House in configuration of the ATV?

• code 511 undetected fan and the fan does not turn or unraced where do replacement or is this question solfware

  code 511 undetected fan and the fan does not turn or did not run where do replacement or this question solfware please help

  [Moved from the community centre of Participation]

  Fan errors are usually hardware problems. There is a fan in the case including detector does not detect that it is available or spinning. This could be a problem with the real fan or the fan sensor.

  Does this have to do with? Are you talking about an error that is displayed by a Windows machine? If so, what version of Windows? When the error take? At boot time? Before or after that Windows allows you to open a session? When you provide no details, it is almost impossible for anyone to help.

• My help and support is does not and same time erorr code 0 x 80070424 shows and I didn't do the fix on erroe code no chance

  My help and support is does not and same time erorr code 0 x 80070424 shows and I didn't do the fix on erroe code no chance

  Hello

  (a) don't you make changes to the computer until the problem occurred?

  (b) when was the last time it was working fine?

  (c) what are the troubleshooting steps you tried to solve the problem?

  I suggest you follow the steps in the KB article below and check if it helps:

  http://support.Microsoft.com/kb/968002

  Hope this information is helpful