Code simple signature for deployment on a single device

Similar Questions

• Code 80070241 in Windows update and "Windows cannot verify the digital signature for this file" when you try to run any program.

  Windows Update has appeared today when we started one of our machines, informing us that there are some installed updates. After reviewing the updates, we clicked on the "Install now" button, and immediately, it failed with the above error code.

  I tried to run regedit a reason unrelated, and it came with a dialog box error with "Windows cannot verify the digital signature for this file. A recent hardware or software change might be installed a file that is signed incorrectly or damaged or maybe it's a malicious software from an unknown source. »

  After researching here and elsewhere on google and did not find anything suitable, put us in the Win7 disk, recovery tools and tried to go back to a previous system restore point (3 days).

  The restoration went well, restarted, but the problem persists.

  Then, we just tried to install anti-malware software, but when trying to run the installer, we get a different error message indicating 'ShellExecuteEx failed; Code 577 "and then the same message on the verification of the digital signature.

  The computer is running fine all yesterday and has worked very well since just after the new year when he has been upgraded to Windows 7. No material changes have been made, and no software changes were made by users in the course of last week.

  The computer is an AMD Athlon II X 4 with 4 GB of RAM on a motherboard Asus M4A78-EM, linking a 64 GB SSD, with a 250 GB drive SATA data/programs. GPU is a Nvidia 260, and it has a CD and DVD player as well. It is connected to our router using the gigabit ethernet interface motherboards.

  It was under windows 32 - bit XP SP3 up just after the new year. When we put in place the new SSD to replace a hard drive older than we have did a new install of XP (slipstreamed with SP3) and then used the upgrade 32-bit W7 Home premium DVD version to upgrade the system. Since then, the system runs flawlessley.

  On the machine is MS office XP, Firefox 3.6.3, AVG 8.5 and a few games such as the Turbine DDO.

  The main user account used to try to solve these problems and to run Windows Update and try installing programs is a member of the Administrators group.

  Firefox works fine, serve, and he plays the games installed very well also. AVG reports to date, with no problems and has detected no threat.

  However, try to view the registry with regedit, or start Viewer event or compmgmt.msc that all do appear the message "cannot verify the digital signature.

  ***************************************************

  Can anyone offer an opinion on what might be wrong with this facility please, and how we could do to solve?

  Cannot run chkdsk/scandisk as he bought the message "cannot verify the digital signature" etc etc.

  This morning, the machine began to behave differently - stop playing back badly, refused to start Device Manager, open Control Panel correctly etc.

  So, I reset the BIOS to boot from the CD-ROM, slapped XP SP3 in reinstalled, then upgraded to Win 7 again.

  Still have no idea what caused the problem, but it seems to be gone now - reinstalled the same applications, AV / programs anti-malware, games, etc and everything seems to go fine now.

  * shrug *.

  Computers.

• The new XP installation error. The signature for the family Windows XP Setup is not valid. The error code is fffffc0d

  I'm doing a fresh install of Windows XP Edition family on a new hard drive.  I get the same error message indicating that the product catalog can not be installed. I reformatted and retryed with the same result. I tried a different HARD disk, but got the same trouble. I also tried installing XP Pro after a reformat and got the same error. The first error window says "the signature for the family Windows XP Setup is not valid. The error code is fffffc0d", and the second says" error: the system cannot find message for message number 0xfffffc0d text in the file for syssetup.dll fatal error messages: Setup failed to install the product catalogs. " Any directive or ideas would be greatly appreciated. THX

  Hello

  I suggest you try the steps from the link below and check if it helps.

  http://support.Microsoft.com/kb/307153

  Hope this information is useful.

• Error: "Windows cannot verify the digital signature for the drivers required for this device (Code 52)"

  Original title: Wireless cannot verify the digital signature for the card driver from son - after an automatic update of the software.

  We downloaded an automatic update of our HP Pavilion laptop running Windows 7.  This disabled somehow the wireless network adapter.  Readings of the error; "Windows cannot verify the digital signature for the drivers required for this device.  A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or that might be malicious from an unknown source. (Code 52) ».  We tried 2 system restore - problem persisted.

  I solved this problem to roll back the driver to that before the driver that is currently installed.  The wireless activated immediately when done.

• Whith USB Device error: "Windows cannot verify the digital signature for the drivers required for this device...". (Code 52) »

  Original title: open usb drivers problem

  My Dell laptop stops working with USB storage drivers. The removable driver icon is displayed in the devices window and printers with a yellow triangle around!
  I've tried different USB drivers and the problem persists. I tried troubleshooting, and it does not help.
  In the Properties window, I get the following message:

  "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) »

  I don't remember making any hardware/software changes and do not know how to solve the problem.

  You are welcome.

  Something seems not quite right so contact the store can be a good idea.

  Back to the initial problem as I understand it, is that when you insert an external drive, you get the error 'code 52?

• Windows cannot verify the digital signature for the drivers - code 52

  original title: driver sata code 52 ts-h653t

  My CD/DVD drive has stopped working today.  Getting a code 52:
  Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)
  Have run Microsoft FIXIT and resolving issues that have been of any help.  Tried to uninstall the driver and restart the computer, nothing.  The CD player is factory installed and worked for nearly 2 years without any problem.  Model driver is TS - H653T SATA.  Did not bring any changes to the computer today before what is going on has begun.  Thanks for your help!

  Also, try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer after

• Hello, I recently created a website for a client. I also created a brochure with a QR code that automatically redirects visitors to a single page in the site. Well, I had to make changes to the site and I had to change the name of the page in which t

  Hello, I recently created a website for a client. I also created a brochure with a QR code that automatically redirects visitors to a single page in the site. Well, I had to make changes to the site and I had to change the name of the page in which the QR code pointing to. Is it possible to keep the current name of the page but create a page of automatic redirect named like the QR code? Basically, the brochures have all been printed already, so I need the QR code when analyzed in order to continue working. Now, it is not the case.

  Nevermind, I figured it. I've reproduced the page, renamed the QR that indicates the code of the page, and then he hid in the menu of page properties.

• error code - 40 in teststand deployment

  I just got a new laptop and installed all the products NOR including TestStand I had in my old laptop. Using the same deployment file I had on the old laptop, I run the deployment utility and get the following errors.  What I am doing wrong? :

  From newspapers.
  Done processing environment file
  Analysis completed
  Building...
  15:34
  An installer is being created.
  Loading information of product deployment
   
  **************
  Error: Internal error. (Error code - 40)
  There was a problem, the information on the source of product 'NOR DataFinder Destop Edition' distribution
  Final report of the error
  **************
   
   
  WARNING *.
  Deployment information of a product not identified to jump because the-40 error code occurred while loading file: C:\Program NIUninstaller Instruments\Shared\MDF\Manifests\NI, Destop DataFinder edition {7D5297CE-E2B6-458C-91F4-47F674A94A8F} .xml
   
   
  **************
  Error: Internal error. (Error code - 40)
  There was a problem, the information on the source of product 'NOR DataFinder' distribution
  Final report of the error
  **************
   
   
  WARNING *.
  Deployment information of a product not identified to jump because the-40 error code occurred while loading file: C:\Program NIUninstaller Instruments\Shared\MDF\Manifests\NI DataFinder {D6B1E623-A952-421A-9C50-1958A056C63B} .xml
   
   
  **************
  Error: Internal error. (Error code - 40)
  There was a problem, the information on the source of product 'NOR DIAdem' distribution
  Final report of the error
  **************
   
   
  WARNING *.
  Deployment information of a product not identified to jump because the-40 error code occurred while loading file: C:\Program NIUninstaller Instruments\Shared\MDF\Manifests\NI tiara {2C52C774-1B40-4848-95EF-735D22EF9203} .xml
   
   
  **************
  Error: Internal error. (Error code - 40)
  There was a problem, the information on the source of product 'NOR DIAdem' distribution
  Final report of the error
  **************
   
   
  WARNING *.
  Deployment information of a product not identified to jump because the-40 error code occurred while loading file: C:\Program NIUninstaller Instruments\Shared\MDF\Manifests\NI tiara {3CB2BF3F-9C33-477B-8D99-251491541ED1} .xml
   
   
  **************
  Error: Internal error. (Error code - 40)
  There was a problem, get information on the source of product 'SignalExpress Steps' distribution
  Final report of the error
  **************
   
   
  WARNING *.
  Deployment information of a product not identified to jump because the-40 error code occurred while loading file: C:\Program NIUninstaller Instruments\Shared\MDF\Manifests\SignalExpress steps {84172037-613A-4B72-B797-E36C04BA5D17} .xml
   
   
  **************
  Error: Internal error. (Error code - 40)
  There was a problem obtaining information on distribution product source 'SignalExpress_App '.
  Final report of the error
  **************
   
   
  WARNING *.
  Deployment information of a product not identified to jump because the-40 error code occurred while loading file: C:\Program NIUninstaller Instruments\Shared\MDF\Manifests\SignalExpress_App {8169D9AA-A2DE-4EA0-BF27-2E7D1CF52D87} .xml
   
  Adding files to install
  Makes adding files
  Preparing to build the deployment
  Copy of the products of distributions
  Deployment of building
  Copy of the configuration files
  Merged configuration database information
  Definition of product information
  Information for the developer settings part
  Final construction of departure
   
  **************
  Internal error: A tool or the library returned an error. (Error code - 21)
  Error messages
  Error: Party to the path "c:\documents and settings\all users\application data\national instruments\mdf\productcache\ni c interface to labview [1.0.1]\lvcinterface\lvcinterface.msi" was registered by 2 products: "NI LabVIEW C Interface" and "NI LabVIEW C Interface.

  Final report of the error
  **************
   
  Deployment of the completed building
  Internal error code-21 a Setup program is being created.
  The Setup is completed
  Construction is completed
  15:35
  Abandoned

  HPatel,

  I found more information about your error code.

  When you generate a deployment, you have the option to cache information about the installation additional programs that include you in your deployment, if you do not have to insert the disc every time.  This error code means that the deployment utility is looking for cached information to add to your additional installers, but it is not.  Clear all your records of cache (C:\Program NIUninstaller Instruments\Shared\ProductCache or C:\Documents and Settings\All Users\Application Data\National Instruments\MDF\ProductCache) and build again.  The deployment utility must ask any disk must be added to the installer, and it will create a new cache.

• Windows cannot verify the digital signature for the drivers required for this device

  I get this error from a specialized device that uses a usb/network card connection built-in.  It is with windows 7 Home premium.  Now I know that the source of the driver.  It is the latest driver and labeled for use with Vista.  I need to override this security check, so I can use this equipment.  It is an integral part with me a living. It is likely absolutrly nothing wrong with the driver.  I downloaded from many sites without modification.  This equipment worked well under Vista.

  Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

  I found the answer by looking for other sites, it's probably here somewhere as well.  Restart the computer.  During restart, press "F8".  Select Disable Driver Signature Enforcement in the start menu.  This fixed the problem of driver in my case.

• Error downloading: digest of invalid signature for main manifest file assigns System.exit unauthorized calls!

  Hello fellow sufferers!

  I am trying to download my first application at BB appworld. While trying to download the file * .bar, I get this error:

  Digest of invalid signature for main manifest file assigns System.exit unauthorized calls!

  What does this errormessage?

  It's my MANIFESTO. MF file:

  Archive-manifest-Version: 1.1
  Archive-created-by: BlackBerry Tablet OS Elf BAR Packager 1.3.1

  Package-Type: application
  The author of the package: -.
  Package name: de.helex.clipmanlite
  Package version: 1.0.2.0
  Package-Architecture: armle-v7
  Package-author-certificate hash: _QCY8j3bSpt-67mhJLED-4xZooXxA7vZBMu2MbHI97SYlh5aoRxaHi44Ie-WMfh9-AGPG2YnwlW7X-AJ-A7xPQ
  Package-author-Id: gYAAgEPQ7F7MvQXnpyTXcW_b9KQ
  Package-Id: gYABgFYDI7fyWoGVx88_tVwB_Ic
  Package-Version-Id: gYACgHvOOTEXtanI-HRmZlA82u8

  Application name: ClipManLite
  Application Description: Clipboard Manager
  Application version: 1.0.2.0
  Request-requires-system: Tablet OS/1.0.7.0
  ID of the application: gYADgFZI5L0DEfspLgVvaOJ8kK0
  Application ID-Version: gYAEgIravTIRSld3gfNygimA3qI

  Name of the entry Point: clipmanlite
  Entry point: QML_IMPORT_PATH = app/native/import QT_PLUGIN_PATH = native/app/plugins LD_LIBRARY_PATH = lib/native-app app/native/clipmanlite - blackberry - platformpluginpath ./app/native/lib/platforms platform
  Entry-Point-Type: Qnx/Elf
  Entry-Point-icon: native/icon.png
  Entry-Point-Splash-Screen: native/splashscreen.png
  Entry-Point-focus: auto
  Entry-Point-System-stocks: run_native

  Archive-asset-name: native/clipmanlite
  Archive-asset-SHA-512-Digest: EgIFzXisCdbgWHASq7sSPYjSDWRzzl77_hw-TYnopqUjV9JDbRORwzCruReZOG2iq3SQv-Yi50NcD7XPHqz_Jw
  Archive-active-Type: Qnx/Elf

  Archive-asset-name: native/icon.png
  Archive-asset-SHA-512-Digest: MFqIlfKgqTrhI3yZkGZyv0l1YUubJblUMc6mhcZuhJfktqX5x-NwfWL7m-McGoKUMjgCTbFBSW1e3voCcZoBGg

  Archive-asset-name: native/splashscreen.png
  Archive-asset-SHA-512-Digest: CNzXgezPb8oKHCJ_4Zqk2_Fb1D6tkMVGEn3mhPQFRD7REdRG0ZnELLdu0gkM1pVvyObc0bH2ouv84_QwJ7kuLg

  Archive-asset-name: native/lib/libQtCore.so.4
  Archive-asset-SHA-512-Digest: 9gnZ149YG3kPs8ZFbHoZ6kFrL5dj4yW40urXd-uZPDrif0zYMzI29TUsp794U4GBiQUXaKKlbZOWUqIZlEHI9A

  Archive-asset-name: native/lib/libQtGui.so.4
  Archive-asset-SHA-512-Digest: EgYpcFf7xItFiqQ_PDm8FFVFu5vdbIrg4-h2d3sB-3FfPuAlnZasR_UQ45yNxzZoIwowtdaNVstIvVZXd7j1AA

  Archive-asset-name: native/lib/libQtOpenGL.so.4
  Archive-asset-SHA-512-Digest: is9HkVzh6mFpVs0N7LkYCH1Aps3pt-Q20XHP37jLnLPnoME4kl3hl9sCkCU1XCm-PchfoX51GxjMS9wBkSuMgA

  Archive-asset-name: native/lib/libQtNetwork.so.4
  Archive-asset-SHA-512-Digest: pP6tPwXFGmFQnYTuHn80aFV7xh8pG4y6wOWIIvGGlp4UXl570Gq5W3lbOuCGtCQKyPwPLc7bVOPuK3Ur8hf6SA

  Archive-asset-name: native/lib/libQtDeclarative.so.4
  Archive-asset-SHA-512-Digest: W2wS_9_9Cqqqio2w6251fhFnxnQm4ZY2COFm5xQQVCQwcMCvly2KmGxVruZO2yc_WN65MGeEOvH4cAAt1rOznQ

  Archive-asset-name: native/lib/libQtSql.so.4
  Archive-asset-SHA-512-Digest: 7H8cJrn5yhG3p4K3G4oYO8XWr_D_AZcLD5T9Zfn6mc8lUiyJ4o6mXouXmFC9imoMeUmq4KsTVM2AdhZStXA7gQ

  Archive-asset-name: native/lib/libQtSvg.so.4
  Archive-asset-SHA-512-Digest: dJk9FYrRJGqPeaEG17LWTKC_ogV6Few2BzK4t-WlcXUg0MJxinKp5jigsCHzFm6SJiFJLHDj3jRS16bTV12qgQ

  Archive-asset-name: native/lib/libQtScript.so.4
  Archive-asset-SHA-512-Digest: 809rAuYFWIOxeJuNJcL63URoMKXz6NKrmKOfZZWDjPUVqTJkxL7tBr_joHZR-EVY1mSJ8wBbh64iB6YdbqTmUg

  Archive-asset-name: native/lib/libQtXmlPatterns.so.4
  Archive-asset-SHA-512-Digest: zVw6F43U2TKa3dbYosygRliRlhdNisb-sdBmzh6AgTyh9GlVCkLLBie781GpQLA-uOyKpDOoT5B6N8h4ulaCBw

  Archive-asset-name: native/lib/platforms/libblackberry.so
  Archive-asset-SHA-512-Digest: uEdFgiXdWMo3MV5szE5vn2EcVXxubMZl4e71PT4z614ONV2ZqcFKzf6CFGzV9mwQGlWKm5Jrra71I2fzASnurw

  Archive-asset-name: native/blackberry - tablet.xml
  Archive-asset-SHA-512-Digest: mzIshm0x0oBMW7T-SlYg5ywvgFSeeHSyx53kkvzaf - WQWDtkbxqqXDldjCQrvYv631_2Q6OCAiYOmZRoslsYg

  Any ideas what could cause this error?

  First I thought maybe it's because the same mistake: what to do if your Package ID was rejected by BlackBerry App World

  But the creation of a new element of product does not help with this problem.

  It is a native application of qml Qt. It does not store the files, need to no write access and uses only simple, free of components created 1.0 QtQuick with no additives. So, it should be the best portable application out of my small collection.

  Unfortunately I have no real device here since I, like many of you, to present one of my tablet at BB App World Applications, first to get a.

  Google was not my friend on this topic, so I hope someone has this kind of error message and could tell me what could bring it. Any kind of advice are welcome.

  Best regards

  HELEx (Ambassador of Qt)

  FYI, a new simpler command allows to sign the 1 step:

  BlackBerry-sign - storepass .bar

  P12 both RDK of passwords must be the same, but this measure will apply to both the two signatures. It should have the same results as the command that you run.

  Kind regards

• Question simple signatures!

  Hello team Cisco,

  I have a simple question for you to do. Why disable most of default signatures? Have no explanation? Why are obsolete? What signature should I allow and what should I disable?

  You could help me, please?

  Kind regards

  Rodrigo Alves

  My thoughts without order.

  set to disable by default signatures

  a. a few signatures are vulnerabilities that are very old. Signatures would be necessary only in rare cases. Affecting the default signature can save resources to the IPS.

  (b) the quality of a signature is perhaps not very high. If the signing is enabled, a large number of false positives generated may be creating frustration for the admin.

  I could go on, but I think you get the idea.

  What signatures need to be activated?

  Signatures that meet your environmental requirements must be enabled. If you are a shop all Windows, you don't need signatures Unix oriented. In addition, you must enable the signatures that match your organizations security policies.

  I would start with the signatures of what Cisco has enabled by default. Feel you comfortable alerts, false positives tune and address problems, allow more signatures.

• The laptop recovery Toshiba Satellite L505-S5997 problem error: Windows cannot verify the digital signature for the drivers required for this device

  I have a Toshiba Satellite L505-S5997 computer laptop and my hardrive recently crushed, impossible to restart.  I installed a SEAGATE 500 GB/sata/GO 16 MB of Cache, 7200 RPM hard drive. I ordered recovery for the computer disks and many of the drivers will not update or install without error that tells me that "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) "error.  Also, when I try to update Windows 7 I get the ' Windows Update cannot currently check for updates, because the service is not running. "  You may have to restart your computer. "When I try to download the service pack from the Web site it is usually interrupted with another error.  I tried to go to the Toshiba website and download the drivers needed and utitilities but nothing seems to work.  I am at a loss to try to seek and find a solution.

  Are you sure that the original problem was caused by a failure of the HD, did you test that the hd with the utility bootable disk from audit?

  As if you reinstalled to a new HD using that the required all defined recovery Tosh disk drivers would have been installed in this process.

  Assuming that Tosh then rebooted successfully after recovery, windows update would have run some important updates automatically. If that failed then it would seem that something is happening with your system.

• Bulletins of update error: ' error: failure of the verification of signatures for: message XML Update SQL.

  Hi all

  I get this error when when looking for Windows newsletters (Patching-> Windows-> news-> news-> control upgrade). Looking at the Task Manager, I see "error: failure of the verification of signatures for: message XML Update SQL.

  I use the latest version vCM 5.8.2. I found another post here on this subject, which mentioned that the KB 2050220 fixed the problem, but it does not work for me .

  You have any other ideas I could try? Where would the real logs that could help me understand what the problem?

  Thank you.

  Well, what it fixed.  Looked in the debugging information, and indeed it was related to the KB 2050220:

  Level: error

  Time: 17/04/2016 10:53:43:460

  ClassName: clsPatchVerification

  FuncName: VerifyPatch

  MSG: (0) downloaded the file: C:\Program Files (x86)\VMware\VCM\Sum\Collector\SUM2_postxml.sql.cab has not a signature of trust manager of Configuration of VMware. Certificate IssuedTo: The issuer of the certificate VMware, Inc.: SHA2 DigiCert assured ID Code signing CA

  SourceDesc: UI

  RequestId: default

  JobId:

  JobMachineName:

  The problem with the added SQL KB is it is old... is no longer reflecting the reality, as the certificate of the cabin has now SHA2 DigiCert assured ID Code Signing CA, and not DigiCert assured ID Code Signing CA - 1 as written in the query SQL attached to the KB.

  That's why we:

  Original VMware KB:

  SET QUOTED_IDENTIFIER ON

  SET ANSI_NULLS

  IF NOT EXISTS

  (

  SELECT *.

  OF dbo.ecm_sysdat_certificate_configuration_settings_ui

  WHERE configuration_name = "DigiCert assured ID Code Signing CA - 1"

  )

  BEGIN

  INSERT INTO dbo.ecm_sysdat_certificate_configuration_settings_ui

  (

  configuration_name,

  configuration_description,

  is_subject,

  is_issuer,

  is_configuration_allowed,

  last_modified_by_id,

  last_modified_datetime

  )

  VALUES

  (

  "DigiCert assured ID Code Signing CA - 1",

  NULL,

  0,

  1,

  1,

  NULL,

  NULL VALUE

  )

  END

  GO

  FIX:

  SET QUOTED_IDENTIFIER ON

  SET ANSI_NULLS

  IF NOT EXISTS

  (

  SELECT *.

  OF dbo.ecm_sysdat_certificate_configuration_settings_ui

  WHERE configuration_name = "SHA2 DigiCert assured ID Code Signing CA"

  )

  BEGIN

  INSERT INTO dbo.ecm_sysdat_certificate_configuration_settings_ui

  (

  configuration_name,

  configuration_description,

  is_subject,

  is_issuer,

  is_configuration_allowed,

  last_modified_by_id,

  last_modified_datetime

  )

  VALUES

  (

  "DigiCert assured SHA2 Code ID signing CA",

  NULL,

  0,

  1,

  1,

  NULL,

  NULL VALUE

  )

  END

  GO

• Correct portgroup self-selection for deployment

  I do a workflow deployment where the workflow itself decides many of the InputParameters (InputParameters) for deploying effective, based on selections from presentation-entries like 'Security Zone', 'Type of environment', etc. of redundant storage required.

  Based on all of these contributions, the scripts 'knows' what cluster to deploy on (hardcoded). He selects then automatically a host (randomly), checks its status, and if it is under maintenance, it selects another. Finding it is a store of data appropriate to correct type, selects the one with the most free space, but also takes into concideration that data warehouses will not be filled above 80%. Provisions of the model, and then adds more ram (If selected), cpu (If selected), add additional hard disks, partitions and then inside the machine virtual etc etc.

  The script works very well and ut saved tons of time on deployment. But there is an information boring litte, that I still have to provide, and it is the portgroup. I would like the script to select the portgroup based on only a VLAN ID given when starting the workflow (presentation), because it would make the script more "self-service" friendly and accessible to other people in the Organization and not only vmware admins because they are knowing what exchanges going with wich hosts/clusters etc. Other parts of organizations concentrate more on placement in areas of security and VLAN, type of environment etc., placement no cluster physical and virtual networks.

  I have several clusters/hosts, some of which are connected to vSwitches and are connected to dvSwitches and some connected to both and I also have different dvSwitches. VLAN 600 could be part of several dvSwitches, but under different name - PG for each dvswitch. It could be called 'P_600' on a dvSwitch and PRD_MGMT on another dvSwitch for other cluster host. And it is very easy to make selections at presentation showing the deployment of CLUSTER D1, then by mistake or confusion (at least for nonadmins) select PRD_MGMT instead of P_600, causing the deployment connect the network to a host no visible switch, causing the deployment fails on the operations of jondomain etc. This is the reason I want the script to do this part itself.

  What I need is a piece of code using a cluster or host as an input, find all the switches to which this host is connected (both standard and distributed). Then loop through all the exchanges on these switches and find a portgroup with the VLAN ID and return this portgroup like VC:Network or VC:DistributedVirtualPortGroup based on what move he was found in specified.  But I could find no way to do what I wanted to use the default API availlable.

  I also tried to change my wishes and some automatism be "hardcoded" that would work also, as part of the cluster (but not like fancy) and do a pice of code taking a dvSwitch specified in hard or vSwitch, hollow loop all exchanges and find the portgroup with VLAN ID good, returning ito a VC variable : Network or VC:DistributedVirtualPortGroup, but I couldn't get that to work either. At least not for dvSwitches, which is used to 90% of all deployments... I can't find a way to work to do this.

  Anyone know how this could be done? In short, how can I loop through all of the exchanges on a dvswitch and return one with a specified ID of VLAN? Any help is appreciated!

  From the code above, I changed it to this:

  var dvPGS = VcPlugin.getAllDistributedVirtualPortgroups();
  for each (pg in dvPGS)
                  {
                                 if (pg.config.distributedVirtualSwitch.name == dvSwitch)
                                                 {
                                                                 if (pg.config.defaultPortConfig.vlan.vlanId == vLAN)
                                                                                {
                                                                                                var SelectedPort=pg
                                                                                }
                                                 }
  
                  }
  
  System.log ("The port "+SelectedPort.name+" belongs to "+dvSwitch+" and has vlan id: "+SelectedPort.config.defaultPortConfig.vlan.vlanId)
  

  This code takes an input string (dvSwitch) parameter number (vLAN) and locates a portgroup successfully with the vLAN gave on the dvswitch with his name defined as string dvswitch, this script makes exactly what I look for when it comes to dvSwitches, because I have to hardcode what dvSwitch belongs to each cluster. It is possible to rework it still more to look at actually connected host/parent etc instead of hard-coding the dvswitch name, but with this code I can actually do the work, so that will probably have to wait for the next version of the workflow :-)

  Now, I just have a working for vSwitches solution too :-)

• BEA-160197: ADF Simple application cannot deploy on integrated weblogic

  JDeveloper 11.1.1.6.0
  
  Simple JSF ADF application fails to test locally on integrated weblogic. I have never seen this and don't have a clue where to look for the problem. Anyone?
  
  [13: 11:01] Application deployment...
  < 23.05.2012. 13.11.01 CEST > < error > < J2EE > < BEA-160197 > < cannot load the descriptor C:\Documents and Settings\drtodor\Application Data\JDeveloper\system11.1.1.6.38.61.92\o.j2ee\drs\TrackingSystem11g/META-INF/weblogic-application.xml of the TrackingSystem11g module. The error is weblogic.descriptor.DescriptorException: Unmarshaller failed
  to weblogic.descriptor.internal.MarshallerFactory$ 1.createDescriptor(MarshallerFactory.java:161)
  at weblogic.descriptor.BasicDescriptorManager.createDescriptor(BasicDescriptorManager.java:323)
  at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:788)
  at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:409)
  at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:759)
  at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:768)
  at weblogic.application.ApplicationDescriptor.getWeblogicApplicationDescriptor(ApplicationDescriptor.java:324)
  at weblogic.application.internal.EarDeploymentFactory.findOrCreateComponentMBeans(EarDeploymentFactory.java:181)
  at weblogic.application.internal.MBeanFactoryImpl.findOrCreateComponentMBeans(MBeanFactoryImpl.java:48)
  at weblogic.application.internal.MBeanFactoryImpl.createComponentMBeans(MBeanFactoryImpl.java:110)
  at weblogic.application.internal.MBeanFactoryImpl.initializeMBeans(MBeanFactoryImpl.java:76)
  at weblogic.management.deploy.internal.MBeanConverter.createApplicationMBean(MBeanConverter.java:89)
  at weblogic.management.deploy.internal.MBeanConverter.createApplicationForAppDeployment(MBeanConverter.java:67)
  at weblogic.management.deploy.internal.MBeanConverter.setupNew81MBean(MBeanConverter.java:315)
  at weblogic.deploy.internal.targetserver.operations.ActivateOperation.compatibilityProcessor(ActivateOperation.java:81)
  at weblogic.deploy.internal.targetserver.operations.AbstractOperation.setupPrepare(AbstractOperation.java:295)
  at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:97)
  at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
  at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)
  at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
  at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)
  at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
  at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)
  to weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$ 000 (DeploymentReceiverCallbackDeliverer.java:13)
  to weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$ 1.run(DeploymentReceiverCallbackDeliverer.java:46)
  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:528)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
  Caused by: com.bea.xml.XmlException: weblogic.descriptor.BeanAlreadyExistsException: bean already exists: ' weblogic.j2ee.descriptor.wl.LibraryRefBeanImpl@86e4fd19 (/ LibraryRefs [[CompoundKey: adf.oracle.domain]]).
  at com.bea.staxb.runtime.internal.util.ReflectionUtils.invokeMethod(ReflectionUtils.java:54)
  to com.bea.staxb.runtime.internal.RuntimeBindingType$ BeanRuntimeProperty.setValue (RuntimeBindingType.java:539)
  to com.bea.staxb.runtime.internal.AttributeRuntimeBindingType$ QNameRuntimeProperty.fillCollection (AttributeRuntimeBindingType.java:381)
  at com.bea.staxb.runtime.internal.MultiIntermediary.getFinalValue(MultiIntermediary.java:52)
  at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType.getFinalObjectFromIntermediary(AttributeRuntimeBindingType.java:140)
  at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalBindingType(UnmarshalResult.java:200)
  at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalDocument(UnmarshalResult.java:169)
  at com.bea.staxb.runtime.internal.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:65)
  to weblogic.descriptor.internal.MarshallerFactory$ 1.createDescriptor(MarshallerFactory.java:150)
  ... more than 27
  Caused by: weblogic.descriptor.BeanAlreadyExistsException: bean already exists: ' weblogic.j2ee.descriptor.wl.LibraryRefBeanImpl@86e4fd19 (/ LibraryRefs [[CompoundKey: adf.oracle.domain]]).
  at weblogic.descriptor.internal.ReferenceManager.registerBean(ReferenceManager.java:231)
  at weblogic.j2ee.descriptor.wl.WeblogicApplicationBeanImpl.setLibraryRefs(WeblogicApplicationBeanImpl.java:1440)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at com.bea.staxb.runtime.internal.util.ReflectionUtils.invokeMethod(ReflectionUtils.java:48)
  ... 35 more
  . >
  < 23.05.2012. 13.11.01 CEST > < error > < hats > < BEA-149605 > < failed to create App/Comp mbeans for AppDeploymentMBean TrackingSystem11g #V2.0. Error - weblogic.management.DeploymentException: Unmarshaller failed.
  weblogic.management.DeploymentException: Unmarshaller failed
  at weblogic.application.internal.EarDeploymentFactory.findOrCreateComponentMBeans(EarDeploymentFactory.java:193)
  at weblogic.application.internal.MBeanFactoryImpl.findOrCreateComponentMBeans(MBeanFactoryImpl.java:48)
  at weblogic.application.internal.MBeanFactoryImpl.createComponentMBeans(MBeanFactoryImpl.java:110)
  at weblogic.application.internal.MBeanFactoryImpl.initializeMBeans(MBeanFactoryImpl.java:76)
  at weblogic.management.deploy.internal.MBeanConverter.createApplicationMBean(MBeanConverter.java:89)
  Truncated. check the log file full stacktrace
  Caused by: weblogic.descriptor.BeanAlreadyExistsException: bean already exists: ' weblogic.j2ee.descriptor.wl.LibraryRefBeanImpl@86e4fd19 (/ LibraryRefs [[CompoundKey: adf.oracle.domain]]).
  at weblogic.descriptor.internal.ReferenceManager.registerBean(ReferenceManager.java:231)
  at weblogic.j2ee.descriptor.wl.WeblogicApplicationBeanImpl.setLibraryRefs(WeblogicApplicationBeanImpl.java:1440)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  Truncated. check the log file full stacktrace
  >
  < 23.05.2012. 13.11.01 CEST > < error > < hats > < BEA-149265 > < error has occurred in the execution of the request for deployment with the ID ' 1337771461093 'for task 1'. Error is: "' weblogic.management.DeploymentException: Unmarshaller failed '"
  weblogic.management.DeploymentException: Unmarshaller failed
  at weblogic.application.internal.EarDeploymentFactory.findOrCreateComponentMBeans(EarDeploymentFactory.java:193)
  at weblogic.application.internal.MBeanFactoryImpl.findOrCreateComponentMBeans(MBeanFactoryImpl.java:48)
  at weblogic.application.internal.MBeanFactoryImpl.createComponentMBeans(MBeanFactoryImpl.java:110)
  at weblogic.application.internal.MBeanFactoryImpl.initializeMBeans(MBeanFactoryImpl.java:76)
  at weblogic.management.deploy.internal.MBeanConverter.createApplicationMBean(MBeanConverter.java:89)
  Truncated. check the log file full stacktrace
  Caused by: weblogic.descriptor.BeanAlreadyExistsException: bean already exists: ' weblogic.j2ee.descriptor.wl.LibraryRefBeanImpl@86e4fd19 (/ LibraryRefs [[CompoundKey: adf.oracle.domain]]).
  at weblogic.descriptor.internal.ReferenceManager.registerBean(ReferenceManager.java:231)
  at weblogic.j2ee.descriptor.wl.WeblogicApplicationBeanImpl.setLibraryRefs(WeblogicApplicationBeanImpl.java:1440)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  Truncated. check the log file full stacktrace
  >
  < 23.05.2012. 13.11.01 CEST > < WARNING > < hats > < BEA-149004 > < failures have been detected all introducing deploy application task 'TrackingSystem11g [Version V2.0 =]'. >
  < 23.05.2012. 13.11.01 CEST > < WARNING > < hats > < BEA-149078 > < message 149004 track battery
  weblogic.management.DeploymentException: Unmarshaller failed
  at weblogic.application.internal.EarDeploymentFactory.findOrCreateComponentMBeans(EarDeploymentFactory.java:193)
  at weblogic.application.internal.MBeanFactoryImpl.findOrCreateComponentMBeans(MBeanFactoryImpl.java:48)
  at weblogic.application.internal.MBeanFactoryImpl.createComponentMBeans(MBeanFactoryImpl.java:110)
  at weblogic.application.internal.MBeanFactoryImpl.initializeMBeans(MBeanFactoryImpl.java:76)
  at weblogic.management.deploy.internal.MBeanConverter.createApplicationMBean(MBeanConverter.java:89)
  Truncated. check the log file full stacktrace
  Caused by: weblogic.descriptor.BeanAlreadyExistsException: bean already exists: ' weblogic.j2ee.descriptor.wl.LibraryRefBeanImpl@86e4fd19 (/ LibraryRefs [[CompoundKey: adf.oracle.domain]]).
  at weblogic.descriptor.internal.ReferenceManager.registerBean(ReferenceManager.java:231)
  at weblogic.j2ee.descriptor.wl.WeblogicApplicationBeanImpl.setLibraryRefs(WeblogicApplicationBeanImpl.java:1440)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  Truncated. check the log file full stacktrace
  >
  [13: 11:01] # incomplete deployment. ####
  [13: 11:01] remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
  # Can't run application TrackingSystem11g due to the deployment on IntegratedWebLogicServer error.
  [TrackingSystem11g application stopped and cancelled Server Instance IntegratedWebLogicServer]

  Wow magic ;) Try the resorts of closing and opening Jdev, remove the system directory and see if it helps...
  Alternatively, maybe you can try to delete this file, record everything, clean your project and create a new weblogic application. XML described here - How to change weblogic - application.xml

  Published by: detrilles on May 23, 2012 Sudipto 21:36