Color laserjet 2500 HP device

Similar Questions

• Color HP Color Laserjet 2500 problem

  Helloo!

  I have a problem with my HP Color Laserjet 2500. I use Windows 7 Professional 32 bit computer. Installed the driver from the hp support, because the CD that came with the printer, is only for XP / 2000/me etc. I've tried both, the driver PC5 and PC6, still the same problem.

  I can print, but I have a problem and a few questions.

  Problem: Sometimes it only prints yellow, sometimes only magneta. Sometimes, it combines blue and magneta and black and yellow on the leaves. And sometimes, it prints all colors. I could tell that almoust 50% of the time, it prints normally. When it doesn't, it prints as I have highest desicribed, in all the different possibilities, sometimes does not print Yellow not, magneta, blue or black. Sometimes it does not print two colors, rearly prints only 1 color and even more rearly (happened about 2 - 3 times) it does not print anything. He has for years a problem since I have it connected to the computer with Win7, but initially, it worked great. Then sometimes he screwed 1 document for a moment, then 2, then 3 in a week. But now it has little more than 50% of the documents that it messes up.

  ABOVE 1: it seems that when I choose printing preferences in the computer, it displays a different language, I think it is Arab! Written from right to left. How can I change this?

  Qouestion 2: I can't find my product serial number. When I print the configuration page, it says printer serial number: CNHDD06356, but when I post in the HP Chat Support, it gives me error. What am I supposed to do?

  If solve you my problem, I buy you a beer when we meet!

  PS. what I tried:

  Cold reset.

  Different drivers.

  New wireless USB from the printer to the computer.

  All cartridges have more than 40% of ink in them. Black 44, 97, 76 and yellow magneta 97% cyan.

  Imaging drum is practically new, shows 93%.

  Clean the printer inside.

  Added a little WD40 on the moving parts.

  Now, I hope you can help me...

  Hello again!

  I SOLVED IT!

  Who has ever, when the function will have the same problem, here is how I fixed it (sorry for my English not so good):

  I googeled a little more and found a topic in a forum:

  http://www.fixyourownprinter.com/forums/printer/68382

  http://www.fixyourownprinter.com/forums/printer/63372#1

  And then I saw a video here:

  https://www.YouTube.com/watch?v=9BoxmagIjhg

  What I did:

  Taken apart from the printer. All the plastic covers. I think that I had to only take 2 screws, at HEC, blankets. I not only took down of it where you put the paper in the coverage, I have has no need of.

  Coverage where you put the color inside was tips. The cover communicates with the other gear, so you have to remove it. To remove it, there is this small black gear inside the printer. In the center of the gable, there is a buttonish thing, you'll have to push in the side, from the Center to the periphery to remove the sprocket and then you will be able to remove the plastic cover.

  Then I did as it is shown in the video:

  https://www.YouTube.com/watch?v=9BoxmagIjhg

  You will need to clean this thing "solenoid". I used a small knife to scrape two parts index. He was supposed to be a felt, but I don't have it anymore, and it is wat was caousing it.

  IMPORTANT: My feelings of the solenoid was cone so I replaced it with Ribbon. I cut a little drops out of an adhesive and clued/wrapped ribbon around the solenoid. It is recommended, however, that you idea a little felt back in there, but I didn't, so I used Ribbon.

  Then I put all the pieces together and it worked!

  You can not believe my happiness, when he began to print each document correctly. I had this problem for a while, and incredibly, it worked.

  If you have the same problem, I hope that this trick of yours will also solve.

  

• Horizontal lines on any page on color Laserjet 2500 l

  I was given this 2500l several years ago and he has had this problem since I got it - it prints dark lines of color on the entire page, in all four colors. The distance between the lines indicate a problem with the roll of T2 (it is the one that is built into the cartridges), but all four? And the strange thing is that I have printed a page, then open the printer and looked the roller, where I could see the extra toner that was originally the lines on the page. But when I marked the position of the line at the edge of the roll, and then printed another page, the line was to a different position on the roller, which indicates that the roll itself is fine.

  I tried to replace a couple of toner with brand new cartridges, but it has not changed a thing. Help!

  Thank you!

  I did a quick search and found the following link:

  http://www.feedroller.com/store/service%20Manual/color%20LaserJet%202500%20SM.PDF

  On page 226 is information on ordering parts and a list of the part and patterns.

• Windows 7 and HP Laserjet 2500 L won't print in color

  I can't get Windows 7 to print in color on a HP Laserjet 2500 L.  I tried to download the driver again and re - install the printer and no luck.  I can get color printing using other printers (Canon and HP Deskjet).  Any ideas?

  It's the work around installing Windows 7 for the HP Color LaserJet 2600n printer driver (I don't know if it will work for the 2500, but maybe worth a try)

  Follow these steps.

  Download driver 64 bit vista for the 2600n. On your desktop, it should say 'clj2600n-HB-pd-win64-fr', do not download the plug-and-play installation, which she usually the first option on the download page.

  Right-click on it and select "Properties". Select the tab at the top that says 'compatibility', then check the box "run this program in compatibility mode for: windows xp sp3 (this does not install but to).
  Download the files extracted, granting of a permit).

  Also, I checked the box "Run this program as Administrator". Click OK to close the dialog box.

  Double-click the Zip file that you just modified. (clj2600n-HB-pd-win64-en)

  You will get a security warning, choose run then you will get the WinZip Self-Extractor. Now be careful, don't forget the location (see below).

  Default location would be in temporary files. I recommend that you type "C:\HP" and then unzip. It should tell you that two files have been unzipped successfully.

  Then you should see the "hp color LaserJet 2600n HB - InstallShield Wizard" (be patient more slow computers may take a few seconds)... It will be by default save files in 'C:\Program Files (x 86) \Hewlett-Packard\color LaserJet 2600n drivers' when it's done, click Next.

  Now, you go through the normal steps to add a local printer (note No LOCAL network) via the Control Panel , then select "existing use and port: LPT1:", and then click Next.

  You should be installing the printer driver box, select have disk at the bottom on the right and go to "C:\Program Files (x 86) \Hewlett-Packard\color LaserJet 2600n drivers" that you have just installed the files. You should see a "CLJ2600" file, select it and finish.

  The HP Color LaserJet 2600n printer should now be in your printers folder.

  Right-click on it and select properties from the printer,

  Click on the tab at the top of the printer for the 2600 properties page that says 'Port', add a Port and add "Standard TCP/IP Port", click New Port. A wizard to add a TCP/IP port is displayed, click Next at the bottom.

  Now, type the IP address of your HP 2600 in the top box and click Next. It should detect your printer and then create a port on the ports of the printer properties box tab. Your new port must be verified, otherwise check it and click on the general tab, select print a test page, it should now display.

  Please note there are minor variations, you can do that always gets the same results, this was as close as I could remember having spent an hour and a half on the online chat with a great technician of HP.

  Good luck.

• Color LaserJet MFP M477fdn Pro: M477 Software Installation fails at 99%

  Like others who have posted here, I have been unable to get the printer software to complete the installation. The printer is a Color LaserJet Pro MFP M477fdn, 3 months. I'm trying to install the software on a new workstation HP Z240 performing Windows 10 (64-bit). The connection is via USB cable. The printer and the software have been previously used with a Windows 7 machine without problem.

  I tried, repeatedly, to install the software from the disc supplied with the printer and also a 126.6 mb download HP Color LaserJet MFP printer M477 Pro series full software and drivers. The results are the same with a source - installation apparently progresses up to connect it the indicator product of progression from screen reached 99%, how it gives an error message "a Setup operation took too long to run. It is a fatal error, preventing the use of the product. Restart your computer and run this installer again. If the problem persists, please visit the web site of product support for your product. "It takes about 20 minutes for the phase of installation to go from 0 to 99%, and then later hooked up to 99% for 2-5 minutes, the error message is displayed.

  I am able to print to this printer, but at least do not have the ability to scan from the computer there is no indication that the I.R.I.S. OCR software is installed.

  I had care of do not connect USB until you are educated.

  I tried repeating the installation without uninstalling first and get the same result.

  I used the uninstall contained the disk feature, and have deleted the printer to the computer using the Panel between the installation attempts.

  I tried to do a right click to run the installer as administrator and get the same result.

  I tried to install after clean boots with turned off Windows Firewall and all functions of the software Norton Internet Security including its function of firewall turned off.

  The event viewer displays none error entry at all and no entry identifies HP as the source of an event.

  I tried to connect via USB 2.0 and 3.0 ports.

  I cleaned recycle them and temporary folders.

  I have updated the firmware of the printer to the 20160331 version.

  Printed printer configuration report will not display any errors, nor that the printer itself indicates something is wrong and confirms the update of the firmware.

  I deselected the optional software, the devices experience HP and I.R.I.S. OCR, trying to install only the required files two more program scanning HP.

  Thanks for any help solving this.

  I think I understood the question, 10 windows installs its own driver, and the installation program expects the hp driver to install.

  DO this FOR THE HP INSTALLER PROCESS (when the percentage meter goes)

  1. go into the Device Manager and find the printer in the list of devices

  2. right click on the printer and select "Update Driver software"

  3. click on "Browse my computer for driver software".

  4. choose "Let Me pick one...» »

  5. Select the named driver: HP Color LaserJet MFP M477 PCL-6 Pro (make sure it's one with a dash between the pcl and 6!)

  6. click next and back to the installation of hp box and must now see the printer and continue the installation.

  -Alex

• HP Color LaserJet 4550: HP Color LaserJet 4550 PCL XL error

  I use this printer for years.  It works beautifully.

  Windows 10 has just done an update & the printer driver disappeared.  I use this printer with a HP Jet Direct J4135A usb card.  Now any driver or what I do I try to install or use, I get the same error message.

  I am trying to use the printer driver's upd-pcl6 - x 64 - 6.3.0.21178.exe.  The printer driver appears in the settings & is by default we & they say that everything works correctly.

  Can you help me please?  I don't want to go out and buy another printer.

  PCL XL error

  Subsystem: KERNEL

  Error: UnsupportedProtocol

  Operator: 0x0

  Position: 0

  Found the solution for everyone that might have this problem.

  Just right click on the printer icon in the Device Manager and select printer properties / Advanced / change & driver driver HP Color LaserJet 4550 PCL6 ranking to HP Color LaserJet 4550 PCL6 and click OK.  That's all there is to it.

  Now, it will work with USB (HP Jet Direct J4135A Card) that is not supported, instead of just supported network.

• HP Color LaserJet Pro M177 MFP: HP Color LaserJet not able to connect to connected HP

  Hello

  I try to activate my printer (HP Color LaserJet M177fw MFP Pro) ePrint and much more, but I'm not able to do it cause connection problem, I guess.

  When I'm trying to 'print the information sheet', for example, the printer is not able to connect (stay on 'Sign in' loop indefinitely).

  My printer is less than a Vodafone EasyBox router, with firewall disabled and no specific barriers defined by me.

  Should I set some port forwarding (even if they should apply to ignore the firewall, when turned on) or any other specific configuration in the router?

  the same connection problem, of course, it happens when I do touch printer and console web administration, of course.

  In addition, I'll let you know that my router is not blocking access, for example, to-from the web (i.e. I am able to manage my NAS from the outside, since he admitted to a DDNS) and other local devices

  I alreay set 8.8.8.8 and 8.8.4.4 as DNS pri/sec and had an output of cycle after the series of DNS.

  My printer also has a static IP address (defined by the DHCP protocol, based on the MAC address), so not a problem, I think.

  Thanks in advance for your help,

  Lorenzo

  Hi Lorenzo,.

  To enable Web Services fumctionality, you'll need to install the latest firmware on your printer (version 20160525)

  You can locate the current version of your printer by selecting configuration > reports > Page of Configuration, the firmware version is listed under the information section on the printer.

  Updated the firmware on Linux by following these steps, but I don't know if the latest firmware is available for Linux or not, try:

  http://hplipopensource.com/hplip-Web/tech_docs/man_pages/firmware.html

  If the latest firmware is not available for linux, temporarily install the printer on a Windows PC or a my and install the latest firmware:

  http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-M177-series/5303438/model/5303443

  Kind regards

  Shlomi

• Can I solve the problems of alignment is to have my Color LaserJet CP1518ni? Red will not line up.

  Can I solve the problems of alignment is to have my Color LaserJet CP1518ni?  Red do not line up, I installed the latest updates, etc.  Calibration does not help.  The printer is only a few years old.  What gives?

  Hi threre, I just work on HP CP1518ni a client with this same alignment problem as most of you are describing. I went through some process and I think I found one that works... If all goes well it will work for

  You too.

  Things I tried before hand... also this machine has all the toners brand HP 90 + life on each of them.

  -Calibrate - has not fixed the problem (tried once)

  -reset the NVRAM - did not problem

  -removed and inspected print cartrides (no problem found), re-installed - fixed no problem

  The 'fix '...

  First, go to the HP website and download the firmware, make sure you only select the right operating system

  you are using. (for me it was Windows XP) Also the requirements of course read, I think you have to

  have with XP SP2 if it perhaps questions, always read the instructions before doing the firmware.

  Here is a quick link to the CP1518ni...

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3422472 & LC = on & CC = US & DLC = in & lang = to & CC = US

  Then, assuming you have the appropriate printer driver installed, double-click the utility you just downloaded and select the CP1518ni from the drop-down list. Now, press the button 'send the firmware '. It will be

  Take a few minutes so just let it do its thing. After that she did try to print something, for me it was NOT fixed.

  Now you want to calibrate the device, maybe 2 or 3 times, on the control panel scroll to the right until

  you see "systemsetup" press ok and scroll to the right again until you see 'print quality' and press ok.

  the first item in this menu is press "calibrate color" ok, now he's going to say 'calibrate now' and press ok one

  last time. It will start the calibration process. Then he did print something new to see how he does.

  for me I had to do the calibration process twice before the quality was normal again.

  Good luck, hope this helps some, I read that some printers still presist even after this process.

• Driver for HP Color LaserJet MFP Pro M PCL 6

  64-bit driver for HP Color LaserJet Pro MFP M477 PCL 6: I have one of these printers, which is able to print double-sided automatically.  The new driver (64-bit) will not accept when I switched to a new laptop, manual duplex printing.  Does anyone else have this problem?  I updated the driver, but the problem persists.

  I managed to find the solution... it is a lot harder than I imagined composed I don't remember clearly how I found it.  But I think it's what you do... Use the control panel to get to the devices and printers, right-click for properties of the printer, then select device settings, then select installed in the duplex unit.  Yes... complicated.  How the average dumb guy like me never to solve such a problem?

• Color LaserJet CM6040 MFP: A3 manual duplex Duplex on Color LaserJet CM6040 MFP taken in charge?

  Hello

  I hope someone can help to answer this question. I am trying to print a newspaper on the double-sided A3, but I get no prompt to reinsert the paper to print on the other side, as I do when I print A4.

  The parameters have been triple checked and still the A3 prints out sequentialy on one side.

  My question is the Color LaserJet CM6040 MFP support manual duplex Duplex A3?

  Thanks in advance

  JEAN

  The CM 6030 / 6040 CM User Guide manual States:

  «Duplex printing: provides printing automatic duplex (print on both sides of paper).» The range of paper size for automatic duplex printing is 175 to 320 mm (6.9 to 12.6 in.) x 210 to 457 mm (8.3 "to 18"). Media weight range is from 60 to 220 g/m2 (16 to 58 lbs.)"

  If you use manual duplex because the printer driver does not offer the automatic duplex option, it may be that the driver does not know that a duplex unit is equipped.

  The function "automatic detection" used by some drivers on the install (or update) does not always; make sure the driver knows that a duplex unit is present on the printer (assuming that a single is present):

  • For the instance of the printer in question, bring up the printer properties dialogue.
  • Select the device settings tab.
  • Make sure the duplex unit is set to installed and not installed.

  You will probably need to be logged in with administrator credentials in order to change the settings of the device.

• Unable to print on Windows 8 with Color Laserjet 1600

  I installed DOT4x64.msi on my new laptop HP Windows 8, since this seems to be the only average current to connect my Color Laserjet 1600. The printer will now appear in the section "Devices and Printers" Control Panel.  But when I try to print something, I get an error message that says that I can't print to the printer. I spent nearly an hour on the phone with HP support with no resolution - in fact, after all this time, I was told "this Department does not support this printer!.» Any ideas on a solution here? Thank you!

  PS - I initially posted on a different picture, I hope someone here can help.

  For this device, the driver of windows 8 will not release until the end of January. Please bookmark this site and refer to it for more information up-to-date.

  Can I 8 supported for LaserJet printers

  In the meantime, drivers windows 7 should work for this device.

  Color Laserjet 1600

• HP Color LaserJet M553: M553 - cannot print two-sided

  Hello

  We have a new HP Color Laserjet M553 (B5L24A) which is not allowing us to automatic duplex.  He is currently runinng via a Windows 2008 R2 server and is network connected via IP static on the Ethernet cable.

  I tried several steps of troubleshooting so far:

  -Several including UPD PS 6.0 5.8 PS, PS 5.5, PCL5 printer driver

  -Several print on print server objects

  -Confirmed the 'device settings tab' has the duplexer enabled on the local print server and print objects

  -Updated firmware for the last datecode 20150731

  -Tested printing from several applications, word, outlook, pdf, internet Explorer, textfile, etc...

  -The same problem happening to all connected users

  The printer accepts orders for manual, automatic duplex printing simply cannot.  No error messages didn't report on Panel print, printer, client or server.  Trying to get your hands on a 2nd M553 so that I can confirm a double problem or not.

  Feels like a problem with the firmware where he does not understand the command duplexing automatic normal or did not recognize the duplexer is installed.

  Any ideas?

  Your model is not the two-sided model.  The duplex model is B5L25A and will say about this M553dn not M553n who is your model.

• Color Laserjet 2605dn: duplex printing with UPD

  The universal print driver that runs on Windows 10 (64-bit) does not recognize on my Color Laserjet 2605dn duplex printing function. drivers passed under older versions of Windows enabled this setting on the Advanced tab.

  Is there a way to enable or UPD grants only limited functionality and does not support the duplex feature?

  Hello

  in devices and printers click on the right button the printer UPD icon and select printer properties.

  In the device settings tab, verify that the accessory set duplex as installed and check for the difference.

  Please let me know if this can help,

  Shlomi

• HP color laserjet 4550n: HP color laserjet 4550n

  Hello

  There are two issues related to:

  (1) I have a HP Laserjet 4550n and it does not connect via USB.

  (2) when I go to HP to find the drivers for windows 7 64 bit, then click ok... it gives page not found.

  Is there someone on the forum who has made a successful conversion using a parallel to usb cable of IEEE1284c?

  Someone at - it all got the real drivers to make this printer work with windows 7-64 bit?

  Here many lift this situation and running, but I have no other place to ask for help

  wontonsoup

  First off usb parallel cables are hit and Miss.  Windows 7 like also to detect automatically printers so even if you get a good adapter it finds the printer, but then cannot find the driver even if drivers for other LaserJet color work with this printer.  If you have a small home network or a wireless router to open the ethernet port, suggest that buy you a map of EIO Jet direct from ebay.  They cost about 5-10 US.  You can use the 601N or 615N.  Install the card in one of the EIO housing at the rear of the printer.  You just remove the 2 screws that fix one of the dishes of the cover and install the card in the slot with power off.  You connect the ethernet cable to the router or switch, turn on the printer while holding the big green button until cold reset appears in the display of the menu and then release the button.  When the printer is ready, wait 2 minutes and then go to the information on the printer menu and print a configuration page. The second page will have network settings including the ip address of the printer.  This ip address to add the printer.  You go to devices and printers, add printer, then down creates the port and in the drop-down menu, choose standard tcp/ip, and then follow the instructions until you get to the page of decision-makers.  You choose the hp on the left and then on the right scroll HP Color LaserJet 4650 if the list or of any color except 3600 laserjet model.  Top finish and print a test page and it should work.

  http://www.eBay.com/Sch/i.html?_odkw=HP+610n&_osacat=0&_FROM=R40&_trksid=p2045573.M570.l1311.R4.TR3.TRC1.A0.H1.TRS1&_nkw=HP+Jetdirect+610n&_sacat=0

• HP Color LaserJet 2605dn

  I have a HP Color LaserJet 2605dn. It worked very well with the Microsoft Vista operating system. I just bought a computer with operating system Windows 8 home and now my printer won't do the double sided printed (not the manual double-sided, but printing double-sided on its own). Is there a driver out there who can help with this? Your Web site was an option for Windows 8 when looking for drivers.

  The default value is the duplexer is set to "not installed".  Go to the devices folder and printers, right click on the 2605, select printer properties, the device settings and set theduplex "installed" unit, apply.