Color HP Color Laserjet 2500 problem

Similar Questions

• Transfer Kit HP color laserjet 5550dn problem

  When I recently replaced my image transfer kit on my desktop HP color laserjet 5550dn printer, I had a slight problem.  The left hook that contains the transfer kit is stuck in vertical position instead of at an angle of 45 degrees outward.  How should I do?

  Kind regards.

  Take a screwdrver a gently down to the "open" position.

  Kind regards

  SD-86

  I work for HP

• Color laserjet 2500 HP device

  Color HP laserjet 2500 - is there a driver for Windows 7?

  It is compatible with Windows 7 and you can download the driver:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=81956&prodTypeId=18972&prodSeriesId=81954&swLang=8&TaskID=135&swEnvOID=4062

• 100 M175nw MFP Color LaserJet printing problem

  When I print a page, there is a separate area on the printed page that looks like a plastic clip or other object blocking the toner onto the paper. It does in black and color.  I want to know if it is likely to beinside the cartridge toner or some other problem before replacing the cartridge. It is fairly constant in the location on the page.   I printed a blank page with lid open and the image was all black except for the object that resembles a plastic clip. It is about 1 inch long on each side and U-shaped. It looks like a big plastic clip.  The plate is clean and nothing on the glass.

  I disassembled the printer and found a piece of paper stuck on the drum. That's what I suspected, but didn't know if it was a piece of plastic or paper.  She was part of a score of postum old and sticky to fix on the drum.  He is currently working.  Thank you

• Horizontal lines on any page on color Laserjet 2500 l

  I was given this 2500l several years ago and he has had this problem since I got it - it prints dark lines of color on the entire page, in all four colors. The distance between the lines indicate a problem with the roll of T2 (it is the one that is built into the cartridges), but all four? And the strange thing is that I have printed a page, then open the printer and looked the roller, where I could see the extra toner that was originally the lines on the page. But when I marked the position of the line at the edge of the roll, and then printed another page, the line was to a different position on the roller, which indicates that the roll itself is fine.

  I tried to replace a couple of toner with brand new cartridges, but it has not changed a thing. Help!

  Thank you!

  I did a quick search and found the following link:

  http://www.feedroller.com/store/service%20Manual/color%20LaserJet%202500%20SM.PDF

  On page 226 is information on ordering parts and a list of the part and patterns.

• Color laserjet 4600 - problem with one color (yellow) for the most part does not print

  Colors look purpleish when printing photos.  It turns out that this is a problem with yellow print.

  We tried to replace the yellow toner cartridge, and it was not fixed.

  PQ troubleshooting, the yellow page is empty except for a thin (16th of an inch) to 99% a horizontal line at the top of the page.

  In the configuration page, all the different areas that should have the yellow are mostly empty, with the exception of the same sort of thin horizontal line at the top of each of these areas.  After updating the firmware from 03.001.0 to 03.016.0: in addition to what is described on the configuration page, some of the fields in the configuration page that should be yellow, have a pale magenta and more this yellow line.

  Our technician came several times and has so far tried to replace the hvps, scanner laser, toner alignment and trainer kit Board.  Nothing has improved the question.  Then for the replacement is the regulator dc ($1000).

  Anyone here have an opinion on what could cause this problem?  It seems they are just throwing parts at home and we're about to tell them to give up.

  It wasn't the dc controller.  I figured out well out - somehow, there was a spring missing behind one of the speeds in the train of drum roll.

• M277dw MFP: color laserjet pro problems of m277dw mfp with access LAN on Mac OX El Capitan

  Impression on the local network with MAC OS causes problems with intermittend. Somethimes it works, often if you use after the first impression of another pc or lap top no printing is possible. Sometimes the errormessage "oder impression was not accepted" takes place. The same problem exists with the option of analysis.

  If the printer is connected via an Ethernet cable, then:

  1. On the printer, click Setup.
  2. Click on network settings.
  3. Click on restore by default.
  4. Turn the printer off and on again.

  Please let me know if this can help with your network issues.

• HP Color Laserjet CP2025 print: color printing problem

  Had the printer listed above for several years and love it.  Have just started having problems with the printer does not print not not in color.  Have a recorded document that needs to be printed every month and have had no problems with it, until yesterday when it is printed in black only.  Another document word also printed in black only.  I printed a test page printed correctly.

  Don't know if there is a definition in the document, or is it a printer problem.  Help!

  Welcome to the community @mwillis HP

  I came across your post about the color printing problem and wanted to answer to help with my suggestions. Please see the guide below to resolve this issue.

  HP Color LaserJet - cannot print in color or impossible to Auto-Duplex (two-sided printing fails) after the installation of the UPD

  Let me know if you have any questions.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

• Can I solve the problems of alignment is to have my Color LaserJet CP1518ni? Red will not line up.

  Can I solve the problems of alignment is to have my Color LaserJet CP1518ni?  Red do not line up, I installed the latest updates, etc.  Calibration does not help.  The printer is only a few years old.  What gives?

  Hi threre, I just work on HP CP1518ni a client with this same alignment problem as most of you are describing. I went through some process and I think I found one that works... If all goes well it will work for

  You too.

  Things I tried before hand... also this machine has all the toners brand HP 90 + life on each of them.

  -Calibrate - has not fixed the problem (tried once)

  -reset the NVRAM - did not problem

  -removed and inspected print cartrides (no problem found), re-installed - fixed no problem

  The 'fix '...

  First, go to the HP website and download the firmware, make sure you only select the right operating system

  you are using. (for me it was Windows XP) Also the requirements of course read, I think you have to

  have with XP SP2 if it perhaps questions, always read the instructions before doing the firmware.

  Here is a quick link to the CP1518ni...

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3422472 & LC = on & CC = US & DLC = in & lang = to & CC = US

  Then, assuming you have the appropriate printer driver installed, double-click the utility you just downloaded and select the CP1518ni from the drop-down list. Now, press the button 'send the firmware '. It will be

  Take a few minutes so just let it do its thing. After that she did try to print something, for me it was NOT fixed.

  Now you want to calibrate the device, maybe 2 or 3 times, on the control panel scroll to the right until

  you see "systemsetup" press ok and scroll to the right again until you see 'print quality' and press ok.

  the first item in this menu is press "calibrate color" ok, now he's going to say 'calibrate now' and press ok one

  last time. It will start the calibration process. Then he did print something new to see how he does.

  for me I had to do the calibration process twice before the quality was normal again.

  Good luck, hope this helps some, I read that some printers still presist even after this process.

• HP Color LaserJet MFP M177 Pro: Problems of analysis between iMac and HP Color LaserJet Pro M177fw MFP

  Hello

  I had no wifi problems between my Imac and HP Color LaserJet M177fw MFP Pro to scan until recently - it can be related to operating system update to OSX 10.11.4 which was done yesterday however.

  I can scan is no longer docyuments from the top of the charger page - scan starts but just hangs and then I can not re - activate the scan function until I have to force it to quit.

  Can you suggest appropriate corrective measures to try please?

  Thank you very much.

  Hello

  Make sure you have the latest drivers installed:

  In the Apple menu, click about this Mac, and then software update.

  Click on the main menu store reload the Page, and then select allow for the update check completed and install any publicly traded Apple / HP update.

  Then install problems with the products HP LaserJet on OS X El Capitan of scanning HP Software Update to address documents (ADF) automatic feeder:

  http://FTP.HP.com/pub/softlib/software12/OSX/HP_Easy_Start/Essentials/S/HP-printer-Essentials-S-4_5_0.pkg

  Kind regards

  Shlomi

• HP Color LaserJet 4600 PS: Driver HP Color LaserJet 4600 PS printer Windows Server R2 2012 problem

  Hello team HP,

  We used the driver 32 bit printer "HP Color LaserJet 4600 PS" to write the PDF file using Acrobat Distiller in Windows server 2003 operating system.

  But now, we have migrated our production environment for Windows Server 2012 R2 64-bit operating system and using the 32-bit printer "HP Color LaserJet 4600 PS" driver in the operating system Windows Server 2012.

  Is the driver support 32 bit printer "HP Color LaserJet 4600 PS" Windows Server 2012 R2 64-bit operating system?

  If it is not supported then what printer driver will support the Windows Server 2012 R2 64-bit operating system?

  Help us to this problem as soon as POSSIBLE and its very high priority for us.

  Kind regards

  Gaudin. B

  Hello

  CLJ 4600 is not supported on Windows Server 2012. However, you can use HP Universal Print Driver (UPD) for print on CLJ 4600 of Win Server 2012.

  Here is a list of the printers supported with the UPD: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04324001#N106AD

  Specification of the UPD: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04380141

  Thank you

• Color LaserJet Pro 200 M27nw MFP - problem scanning ADF

  Seems to me a new Color LaserJet Pro 200 M27nw MFP running on a PC with Windows 8 and have come to realize that whenever I scan from the ADF Document (CAD), no output file is generated. The original document is drawn in by the document successfully feeder and the printer display indicates that the scan is ready. However, no analysis file is generated. This happens regardless of know if I send the output to USB or to e-mail and if the original document leaves simple or multiple.

  Interestingly, the ADF works fine if I try to produce paper copies, in other words, the printer is able to pull in the leaves o FRENCH original of the document in the ADF (as this either alone or several sheets) and to produce copies of the original successfully. Furthermore, I have no problem to scan multiple or single sheet documents when the original document is loaded by the Scanner flat, rather than the document feeder Scanner.

  Appreciate any help. Thank you

  Stephen

  HI @StephenScerri ,

  I see by your post that when scanning from the ADF there is no output file containing the scan which is generated on USB or e-mail. You can copy the ADF and scan successfully of the bucket. I would like to help.

  Is this printer the Pro 200 M127nw MFP Laserjet

  I have provided a document for how Scan: Windows 8

  When you scan from the magazine, you get an overview of the analysis of the computer software?

  What is the scan preview, but do not save it to the computer?

  What software are you using to scan?

  Try saving the scan on the computer, if you get a preview, to see if it will save the scan it.

  Please provide detailed results if you're still having problems.

  Have a great day!
  Thank you.

• Color Laserjet Pro M476dw MFP: HP Color Laserjet MFP printing problems M476dw Pro

  Only, we installed our printer HP Color Laserjet Pro MFP M476dw yesterday and I noticed once it is published a PCL XL Error report instead of what I was printing.  I don't think that anything from him, but today, it happens almost all the time.  I tried to find possible solutions and stumbled upon everyone says to disable AVG...  We do not use AVG, we use MSE.  Is it a driver problem or else?  Any help would be appreciated.  Nothing more annoying than to try to use a new printer and it is not working properly.

  I went to the site HP dl had the HP Universal 5 driver and installed it and now it's printing even more crazy.  I enclose a photo of what he does.  It is not fair to Quickbooks, it does also in PDF, Word, and Outlook.

  

  I shouldn't have as many problems with ANY NEW MACHINE!

  The trainer would be relatively easy to replace, from what I've read your machine should be guaranteed if you need to contact HP support and they can send you another.

  You might even be able to find an authorized service provider who will come out and fix it.

  And if its brand new and you bought it in a store to resume.

• Problem with Printer Color LaserJet 2600n of printing. Thin strips Magenta on the printed Pages

  I have a Color LaserJet 2600n, on which I replaced both magenta and yellow cartridges a week ago. Both cartridges are genuine HP. The printer cleaned and calibrated.

  Today, the thin magenta strips about 3 "apart began to appear on my printed pages. Print pages, but there is a 'click' stable, audible about 2 seconds apart from from the inside of the printer. Even after a cleaning several times, the bands are less bright, but they are still there. They also appear on the printed test page and on the page of troubleshooting print quality. Is there something wrong with this new magenta cartridge? This problem has never happened before in the 6 years, I've owned this printer.

  Here a link to the document that addresses the issues of print quality for your printer model. It will give you the different troubleshooting steps to try to resolve the problem. One of the steps in the document will guide on inspecting the print cartridge and see if the replacement is in order. I hope this helps.

• Windows 7 and HP Laserjet 2500 L won't print in color

  I can't get Windows 7 to print in color on a HP Laserjet 2500 L.  I tried to download the driver again and re - install the printer and no luck.  I can get color printing using other printers (Canon and HP Deskjet).  Any ideas?

  It's the work around installing Windows 7 for the HP Color LaserJet 2600n printer driver (I don't know if it will work for the 2500, but maybe worth a try)

  Follow these steps.

  Download driver 64 bit vista for the 2600n. On your desktop, it should say 'clj2600n-HB-pd-win64-fr', do not download the plug-and-play installation, which she usually the first option on the download page.

  Right-click on it and select "Properties". Select the tab at the top that says 'compatibility', then check the box "run this program in compatibility mode for: windows xp sp3 (this does not install but to).
  Download the files extracted, granting of a permit).

  Also, I checked the box "Run this program as Administrator". Click OK to close the dialog box.

  Double-click the Zip file that you just modified. (clj2600n-HB-pd-win64-en)

  You will get a security warning, choose run then you will get the WinZip Self-Extractor. Now be careful, don't forget the location (see below).

  Default location would be in temporary files. I recommend that you type "C:\HP" and then unzip. It should tell you that two files have been unzipped successfully.

  Then you should see the "hp color LaserJet 2600n HB - InstallShield Wizard" (be patient more slow computers may take a few seconds)... It will be by default save files in 'C:\Program Files (x 86) \Hewlett-Packard\color LaserJet 2600n drivers' when it's done, click Next.

  Now, you go through the normal steps to add a local printer (note No LOCAL network) via the Control Panel , then select "existing use and port: LPT1:", and then click Next.

  You should be installing the printer driver box, select have disk at the bottom on the right and go to "C:\Program Files (x 86) \Hewlett-Packard\color LaserJet 2600n drivers" that you have just installed the files. You should see a "CLJ2600" file, select it and finish.

  The HP Color LaserJet 2600n printer should now be in your printers folder.

  Right-click on it and select properties from the printer,

  Click on the tab at the top of the printer for the 2600 properties page that says 'Port', add a Port and add "Standard TCP/IP Port", click New Port. A wizard to add a TCP/IP port is displayed, click Next at the bottom.

  Now, type the IP address of your HP 2600 in the top box and click Next. It should detect your printer and then create a port on the ports of the printer properties box tab. Your new port must be verified, otherwise check it and click on the general tab, select print a test page, it should now display.

  Please note there are minor variations, you can do that always gets the same results, this was as close as I could remember having spent an hour and a half on the online chat with a great technician of HP.

  Good luck.