Horizontal lines on any page on color Laserjet 2500 l

Similar Questions

• Horizontal lines in any type of video file exported into Elements 9

  I spent 4 to 9 items items for my video production, and I have not been able to get rid of the horizontal lines in ANY type of file or with any setting.  I tried everything I read so far on these forums.

  Many comments say that export to WMV is the problem, but I export hundreds of videos to WMV with 4 items on my computer XP 32-bit.

  That or XP 32 bit on my new super powerful computer to Windows 7 64 - bit, Elements 9 makes lines with movement. The screenshot shows a typical example.  Butterflies as lines of flight and the edge of a tree, as I panned, possesses a shading along he made many lines.

  I was never really happy with first elements WMVs. I usually have a Premiere Elements, DV - AVI output and then use Windows MovieMaker to create a really nice WMV.

  But here are some options:

  When you go to computer/share/WMV, try clicking on the Advanced button and,.

  In the advanced settings, go to the video tab, and then assign the Codec Windows Media Player 9 Advanced Profile. (You will be prompted to save a new preset when you click OK - so you can reuse it any time that). See if that makes a difference.

  If not, there other things you can do for the DeInterlace your video on your timeline - but you shouldn't need to do this.

  Or you can use my method. Windows MovieMaker is much cleaner WMVs!

• Color HP Color Laserjet 2500 problem

  Helloo!

  I have a problem with my HP Color Laserjet 2500. I use Windows 7 Professional 32 bit computer. Installed the driver from the hp support, because the CD that came with the printer, is only for XP / 2000/me etc. I've tried both, the driver PC5 and PC6, still the same problem.

  I can print, but I have a problem and a few questions.

  Problem: Sometimes it only prints yellow, sometimes only magneta. Sometimes, it combines blue and magneta and black and yellow on the leaves. And sometimes, it prints all colors. I could tell that almoust 50% of the time, it prints normally. When it doesn't, it prints as I have highest desicribed, in all the different possibilities, sometimes does not print Yellow not, magneta, blue or black. Sometimes it does not print two colors, rearly prints only 1 color and even more rearly (happened about 2 - 3 times) it does not print anything. He has for years a problem since I have it connected to the computer with Win7, but initially, it worked great. Then sometimes he screwed 1 document for a moment, then 2, then 3 in a week. But now it has little more than 50% of the documents that it messes up.

  ABOVE 1: it seems that when I choose printing preferences in the computer, it displays a different language, I think it is Arab! Written from right to left. How can I change this?

  Qouestion 2: I can't find my product serial number. When I print the configuration page, it says printer serial number: CNHDD06356, but when I post in the HP Chat Support, it gives me error. What am I supposed to do?

  If solve you my problem, I buy you a beer when we meet!

  PS. what I tried:

  Cold reset.

  Different drivers.

  New wireless USB from the printer to the computer.

  All cartridges have more than 40% of ink in them. Black 44, 97, 76 and yellow magneta 97% cyan.

  Imaging drum is practically new, shows 93%.

  Clean the printer inside.

  Added a little WD40 on the moving parts.

  Now, I hope you can help me...

  Hello again!

  I SOLVED IT!

  Who has ever, when the function will have the same problem, here is how I fixed it (sorry for my English not so good):

  I googeled a little more and found a topic in a forum:

  http://www.fixyourownprinter.com/forums/printer/68382

  http://www.fixyourownprinter.com/forums/printer/63372#1

  And then I saw a video here:

  https://www.YouTube.com/watch?v=9BoxmagIjhg

  What I did:

  Taken apart from the printer. All the plastic covers. I think that I had to only take 2 screws, at HEC, blankets. I not only took down of it where you put the paper in the coverage, I have has no need of.

  Coverage where you put the color inside was tips. The cover communicates with the other gear, so you have to remove it. To remove it, there is this small black gear inside the printer. In the center of the gable, there is a buttonish thing, you'll have to push in the side, from the Center to the periphery to remove the sprocket and then you will be able to remove the plastic cover.

  Then I did as it is shown in the video:

  https://www.YouTube.com/watch?v=9BoxmagIjhg

  You will need to clean this thing "solenoid". I used a small knife to scrape two parts index. He was supposed to be a felt, but I don't have it anymore, and it is wat was caousing it.

  IMPORTANT: My feelings of the solenoid was cone so I replaced it with Ribbon. I cut a little drops out of an adhesive and clued/wrapped ribbon around the solenoid. It is recommended, however, that you idea a little felt back in there, but I didn't, so I used Ribbon.

  Then I put all the pieces together and it worked!

  You can not believe my happiness, when he began to print each document correctly. I had this problem for a while, and incredibly, it worked.

  If you have the same problem, I hope that this trick of yours will also solve.

  

• M3035: LaserJet M3035 Intermittent black lines on any Page, no question of Scanner Laser

  Currently of problems with two of these Multifunction products.

  Machine 1 # started a week ago and a half, intermittent lines that seem to be a problem of HVPS, (power supply high voltage).  Two lines on the page between the longitudinal edges, lines appear blurry.

  There are three printers M3035 in this room, machine #2 is mainly used for file scanning and until about 2 weeks ago was not used for printing.

  When #1 didn't #2 toner cartridge was traded in #1, (and #1 cartridge # 2), number one has always had the same problem so I ordered a HVPS.

  The next day, I was out and another Tech looked #1 and decided that it needed a transfer roller and also decided to Exchange #1 to #3, given that the person using #1 was printing which were to be made where they are not accessible to everyone.

  A few pages of test were performed on #3 and they looked good, so no. 3 has been moved into the Office next to #1.

  When #3 was turned on and tested, it was printed lines across the page!

  Since #3 is running on the power of the cable #1 cable has been replaced with a new cable.  The output has been verified for correct wiring, (tester used wiring available at Home Depot, etc.) and I took out my meter and the good test line and remained strong throughout testing printing.

  An extension has been completed past another outlet to verify that the problem was not gout and #3 failed again.

  #1 has been moved to the office #3 has and has been tested, he had problems, but they were slightly different, there was a grey shading across the entire page, because it was new I swapped the toner with #2 (this replace the original toner # 1) and #1 worked well, but was so #2.

  At this point, it was late on a Friday so that the print was made in another room and the problem put off until Monday.

  (will continue in another post)

  This printer has the same engine as the P3005 and there is a question that has been pretty common on this printer and it's the block of ground on the left side.  There is a mech that when you open the toner door separates a spring load piece since the acutal post that goes against the drum unit on this side of the Earth.  When you install the toner and close the door mechs two-piece flat against them and provide the grounding.  You will see I think that red ground wire that attaches from the bottom.  Most of the time the solution is very easy.  I just take a big piece of cardboard and paste it between the 2 black pieces of the MAN.  It remains in place because of the spring mech that keeps the two pieces together.  Once done, who takes care of the issue.  The lines that you get at least in my experience are caused by a lack of firm ground.  If you can recreate the lines still just have side trim left and just press the black mech and make a test and I do not know that the lines will be gone.  I repaired probably at least a couple of dozen of those printers who had this problem using the same procedure.  You can see the other two printers as it is a very common problem.  According to me, that the parties are called upon to lever earthing contact.  Chances are that supply high voltage was good.

• Color laserjet 2500 HP device

  Color HP laserjet 2500 - is there a driver for Windows 7?

  It is compatible with Windows 7 and you can download the driver:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=81956&prodTypeId=18972&prodSeriesId=81954&swLang=8&TaskID=135&swEnvOID=4062

• Horizontal line going through random pages printed by LaserJet P1102w

  From time to time, I see my P1102w print pages with a small horizontal stripe. This happens only on a single page (not the one just before or just after). I looked in the manual and don't see in the troubleshooting section.

  I doubt that there is toner low, such that it has less than 1000 pages are printed on the current toner.

  Any suggestions?

  
  HP LaserJet p1102w

  Nothing on this page that you linked to, adapted to my problem.

  I just changed a new toner, and after 75 pages or more, I have yet to see this horizontal line randomly. It was printing on pages 5 to 8 or more, then it is a fairly representative sample.

  It is strange, however, assuming that it is the toner. I got about 1000 pages out of it, maybe less, but it is a bit disappointing. I put in when I am done with this new toner, just to get my money, but still...

• Shows HP LaserJet 3330 horizontal lines exactly each 1.5 "when you print a completely blank page

  HP LaserJet 3330 shows seven or eight approximately 3.5 "cloudy horizontal lines spaced exactly each 1.5" even when you print a completely white page. This also happens when copy and fax.

  There are also 2 very thin vertical lines running down the entire page about in the middle. They are exactly 1 "apart.

  However, a scan of a blank page on my computer (not printed) is perfectly clean.

  Windows 7. No change or upgrade.

  Propbably the toner cartridge, if they are 1.48 "apart that it could be the cylinder in the process of development or the charge roll who are both in the toner cartridge. So a good assumption if you replace the toner cartridge, the problem will disappear. Vertical lines could also be part of this issue.

• Why is my printer HP LaserJet Pro CM1415fnw prints 4 horizontal lines of each color of ink?

  My printer prints 4 horizontal lines of each ink color.  Sometimes it does and sometimes it doesn't.  I tried the recalibration, restart, remove all the cartridges and put in new cartridges.  Nothing works.  What is the drum?  The printer is only 6 months old.

  eswanson,

  This article should cover the problem you are experiencing. Give the steps a shot and let me know if it helps:
  http://goo.GL/KGvSV

  Good luck!

• HP laserjet m277dw: horizontal lines on HP laserjet m277dw

  I have a m277dw HP printer color laser, purchased two weeks ago. After about 10 pages, he began to print horizontal lines 22 and 23 mm. They are better visible on a single color background. Are still visible on the page of demonstration with ball.

  Support couldn't see them on scan I sent by email, but they say it is possible that these lines are ok for this printer (?).

  They are terrible and extremely disappointing, can you confirm that this is a normal operation of the printer?

  I used normal paper and the default settings for printing from my pc. I also sometimes spill toner on a page in different places, sometimes even on the back of the page.

  I tried to clean the drum of imaging with a soft cloth, it helps with spills and also makes lines less visible, but only for a few printed pages next. I also tried to make the calibration and cleaning page, but without success.

  https://www.dropbox.com/s/u4n3y7k67pic6yt/IMG_1426.jpg?DL=0

  https://www.dropbox.com/s/afl549df6cmu23y/IMG_1427.jpg?DL=0

  I see the lines and they are not normal for any laser printer which makes HP.
  
  I suggest trying some different solid color pages that mix the colors as a green page and perhaps a red page.
  
  You can also see the problem in print quality pages that have been mentioned by the previous poster.
  
  You just need to get something where support can see you have a problem and then be insistent that they fix it.
  
  But let's be practical here, you bought less than two weeks, return it and get another, it's probably only a defective cartridge but you should not have to fight the HP support for service.
  
  And I want to return and get a refund then buy the replacement. You want a receipt to go with your new printer clean, clean as in with a good date and anything else on this topic.
  
  If my post is solved your problem and click the accepted as button solution under him.
  
  In order to thank a Tech for a post click the thumbs up button under the post.
  
  You can even click on the two keys...

• HP Color Laserjet: HP Color LaserJet - lines/stripes

  Hello

  I have a HP color LaserJet and I get a lot of lines and streaks on my printed pages.

  I also note toner inside the printer and my printer seems to take cleaning cycles more than before.

  Thank you!

  Although I work for HP, my posts are MY opinion and not those of HP.

  I would recommend some of the things

  First of all, make sure that your firmware is up-to-date, go to the page software and drivers on HP.com download and install the latest firmware available for the printer.

  Then, make sure that the toner collection unit is not complete

  Finally, print a cleaning of the control panel of the printer page, normally, you should select the following text in the menu:

  • Maintenance of the unit
  • Calibration / cleaning
  • Cleaning page

  You can also view this document as well.

  HP Color LaserJet Enterprise M552, M553 and MFP M577 - lines/stripes, toner and cleaning cycles dust excessive

  Hope that helps.

• Color Laserjet M476dw MFP: page in the nonpaged area 'failure' BSOD when you install the latest driver for M476dw

  I just bought a Color Laserjet MFP M476dw for use on my wireless network.

  I downloaded the latest version of the suite of the HP driver: LJPro-MFP-M476-Full-Solution-13302

  for my Windows 8.1 operating system / 64 - bit and listed as version: 10.0.13302.320 - September 25, 2014

  I was connected with a local administrator for the installation level account

  I started installation, the printer was discovered and s/w install went fine until she gets to the point of print test page test page printed but that page was printing the computer locked with his (first) Disconnections:

  "failure of page in the nonpaged area".

  I turned off, restarted and after the connection got an error message that says:

  «The HP printer and Alerts State met and error and can not recover... Please restart...»

  Windows version: Win32NT 6.2.9200.0

  HP printer status and alerts version: 070.040.00169

  I rebooted again and got the same error...

  I started the uninstall program with the hope of just uninstall the printer status s/w and then put it back.

  but the uninstall program seems to have uninstalled the entire suite of s/w...

  Before going to this one more time, I thought that I would like to ask for suggestions...

  I've owned this phone for 6 months, and it was Cap... it's the first BSOD I did...

  Thanks for any help!

  I wanted to just close this thread:

  I was out of town for a week, but just returned and recalled to HP support.

  The technician did a large manual cleaning of the pilot has failed on my machine.

  and ran two different installers cleaning MSI Windows then with temporarily disabled antivirus s/w

  (which I had also done during initial Setup) we re-installed and everything seems to work.

• HP Color LaserJet CM1312 nfi no print only one page (document)

  Hi all.

  I'm in big trouble with Color LaserJet 1312 nfi (on 2 PC). Printer still print ONLY a single document (regardless of the number of pages) that I can't continue. I have to restart computer or the user to login and I print a new document. Scan OK.

  PC config:

  Windows 7 x 86

  connect via the USB port (but LAN made the same mistake)

  PCL6 driver

  I tried:

  reset to factory default

  the latest firmware update

  connect via LAN instead of USB

  Print via another PC (printer sharing)

  connect the printer to the other PC (USB, LAN)

  install the drivers of PCL5

  turn off Mopier mode (not available)

  Win XP - OK (printer so no problem)

  Any ideas?

  Thank you.

  Hello.

  Installation new version Universal Print Driver for Post Script - no change.

  I tried a thousand ways and WE work:

  install driver of the old school-HP Laser Jet III from Windows Update.

  I hope it helps someone...

• HP color laserjet 2840 printing and copy blank page

  Hi all

  I have hp color laserjet 2840, printing and copy empty, I change the toner and drum but nothing! any idea?

  Sorry for my bed English

  Thank you

  Try this test.

  Printed page in after you get the blank page open the access door and see if you can move the carrousel by hand.

  If the carousel will rotate the carousel latch is stuck.

  The lock can be fixed by disassembly of the valve and clean some foam sticky residue deteriorated and its replacement by a thin piece of material. I use stickers very thin markers of a dollar store.

• Can I solve the problems of alignment is to have my Color LaserJet CP1518ni? Red will not line up.

  Can I solve the problems of alignment is to have my Color LaserJet CP1518ni?  Red do not line up, I installed the latest updates, etc.  Calibration does not help.  The printer is only a few years old.  What gives?

  Hi threre, I just work on HP CP1518ni a client with this same alignment problem as most of you are describing. I went through some process and I think I found one that works... If all goes well it will work for

  You too.

  Things I tried before hand... also this machine has all the toners brand HP 90 + life on each of them.

  -Calibrate - has not fixed the problem (tried once)

  -reset the NVRAM - did not problem

  -removed and inspected print cartrides (no problem found), re-installed - fixed no problem

  The 'fix '...

  First, go to the HP website and download the firmware, make sure you only select the right operating system

  you are using. (for me it was Windows XP) Also the requirements of course read, I think you have to

  have with XP SP2 if it perhaps questions, always read the instructions before doing the firmware.

  Here is a quick link to the CP1518ni...

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3422472 & LC = on & CC = US & DLC = in & lang = to & CC = US

  Then, assuming you have the appropriate printer driver installed, double-click the utility you just downloaded and select the CP1518ni from the drop-down list. Now, press the button 'send the firmware '. It will be

  Take a few minutes so just let it do its thing. After that she did try to print something, for me it was NOT fixed.

  Now you want to calibrate the device, maybe 2 or 3 times, on the control panel scroll to the right until

  you see "systemsetup" press ok and scroll to the right again until you see 'print quality' and press ok.

  the first item in this menu is press "calibrate color" ok, now he's going to say 'calibrate now' and press ok one

  last time. It will start the calibration process. Then he did print something new to see how he does.

  for me I had to do the calibration process twice before the quality was normal again.

  Good luck, hope this helps some, I read that some printers still presist even after this process.

• HP LaserJet Pro CM1415fnw: Horizontal lines

  I get horizontal lines of black soft about an inch and a half out when printing. I ran a cleaning cycle and the lines are still there.

  You must find the ruler of repetitive defects to the machine as we speak. The repetitive defects ruler is a chart that shows what the machine rolls can cause a problem based on the distance between the beginning of a defect in the beginning of the next.
  
  But to make it even more simple since you use a machine of color and the default appears in a color then it is almost always going to be color, in that the default is the toner cartridge.
  
  If my post has solved your problem then please be admitted as button solution under him. In order to thank a technician for a position you can give them congratulations by clicking on the thumbs upwards the button under the post. Hey it's Friday you can click on the two buttons.