Color scheme changing based whenever I plug in the power cable

Similar Questions

• MS A30 - battery charging when I plug in the power cable

  Hello

  I'm having some problems with (I think) on my A30 power management utility. When I am running on battery power and I plug in the power cable, the battery continues to discharge even if the laptop 'knows' that it runs on the power grid (ie the utility says "current generator: alternating current.") "Online, discharges: 82%. Strangely, if I put the laptop in mode 'sleep', then resume, she goes back to normal (i.e. working on current alternative, the battery charges).

  It is true, I think that this began after I installed "PC Pitstop optimize Scan" www.pcpitstop.com (please, not conferences - I used a couple of their public services before and they were very good, so I thought it would be too much), so I guess it's some sort of configuration problem, but I have no idea where to go from here. I went through all the options on the power management utility, but they all look sensitive. Any ideas (other than do not install software stupid, doubtful)?

  Kenny

  Hi Kenny,

  I experienced this behavior on my A30 where the system says it works on current alternative, but still drains the battery and stops eventually.

  In my case the problem has proved to be a loose DC Jack that sometimes cuts off contact with the socket on the back of the laptop. This momentary loss of power DC seems to provoke the power management utility switch to battery power, even though the DC power is restored. The only way out of this situation is to Hibernate / restarting the laptop.

  I think that it is a problem with the power supply subsystem in the laptop that does not react properly when it encounters a momentary loss of DC. Then the Toshiba power management utility is no longer responds correctly and switches to the battery power.

  My only solution to this was to anchor the DC cable to the back of my A30 so that there is now no chance of the plug DC moving in its socket. This has proved to be very effective for my A30 and I've had no recurrence of the problem.

  HTH

• HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  The battery is dead. When I try to turn on the laptop by plugging the AC adapter does not charge or led power LED does not turn on. But when I press the power button, the power, the indicator flashes and turns off (when power adapter connected).

  (1) I tried the press and holding the power button for 30 seconds after removing the battery & AC adapter / CC.

  (2) I tried to change the power adapter too.

  The problem is that it is.

  Your advice is very much appreciated.

  Thank you best regards &,.

  Zia

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  It seems that you are not able to turn on the laptop and tried to solve the problem

  Please perform steps listed to find out if it is a hardware or software problem below:

  1. remove all cables and devices, disconnect them and try to turn on the device

  2. check the LED light situation and ensure the action of the spring button / stop is normal

  3 Exchange with a well known power cord and the AC adapter

  4 Pack no adapters are available, check if the power adaptor is slightly warm

  Note: This will give us an indication that the power adapter could be good

  5. do you know if the laptop was in battery or power adapter when you used the last time

  Note: Make sure that there is no spill of liquid or cutting

  6. check if the Port of the AC adaptor is loose/broken

  Note: If the laptop is not on even with a power adapter well known, this confirms the hardware failure with the system board or power DC Circuit

  Hope this helps for other queries to answer the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• Presario CQ20-320TU: my notebook (presario CQ20) directly turn on when I plug in the power cord without battery

  My laptop (presario CQ20-320TU) turn directly every time I plug the power cord without battery. What is the solution?

  Hi there @emonsonjaya,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that your notebook is turn on/off automatically when it is plugged. I'm happy to help you.

  I would recommend that you look at your BIOS, especially in power options and check if your BIOS has a setting option on automatically. If yes it change at your convenience.  Another option would be to update your BIOS and see if that solves it.

  Here is the page of support for your model and, if necessary, give it a try, it will automatically download the file if you click on the link. You then need to run the executable file of your current download folder.

  HPQFlash for HP Notebook System BIOS (68PHU) - Microsoft Windows-Based

  If you are having problems with an update of the BIOS, you can always restore it, using the following:

  HP Notebook PC - restore BIOS

  I hope this helps.

• Satellite L750 slows after plugging in the power supply

  Hello everyone

  It's almost a year since I have TOSHIBA L750-12 model q PSK2YE-05P00RPL.
  Since the beginning, I noticed strange shares: when the battery becomes low at 10% and I plug the power supply everything starts to work slowly (for example I can see frames when using the webcam)
  also, web sites load very slowly or not at all. It's doing my work on laptop almost impossible.
  When this problem occurs, there are a few bugs in Event Viewer:

  Event 37, kernel-processor-Power
  "The speed of the CPU 0 in group 0 is restricted by the system firmware. The processor is in this state of reduced performance for 71 seconds since the last report. »

  I thought it was the power supply problem or motherboard to power so I sent the laptop to the service. Technical support only changed the BIOS to version 3.60 [there is not an another atm version] and he has not solved anything.
  I searched the internet and I found that this failure can occur because of the Enhanced Intel SpeedStep Technology option, but unfortunately I can not disable it in the BIOS.

  I read that there was problem simillar with for example Portege R835-P84 and new BIOS helped and solved this.

  Please help :(

  PS Sorry for my English.

  I also imagine that new and modified BIOS can help with this, but if Toshiba doesn't offer it there is nothing you can do, especially with the SpeedStep technology options.

  Maybe stupid question now, but when you connect the battery change the plan power high performance is a laptop s performance difference?

• NB200 abandoned wireless connection when the power cable is plugged

  ALL ideas welcome, my notebook NB200 drops Wi - Fi when it's attached power alternative, on another forum, someone suggested I could change the power settings to avoid this problem, but not how, all ideas welcome, thanks
  kazz45

  > I found the power options, but all that it gives me a choice of power management, which is energy-saving Toshiba which corresponds to the current setting, I see nothing wireless on the tabs it?

  You must discover the power plan that is used when the power adapter is attached.
  Then, you click on change the power plan settings

  New window would be open where you will find an extra option called change advanced power settings

  Now you will see further options. Scroll down the settings of the wireless adapter and make sure both options are set on the performance

• Satellite M30X: fans do not stop if plugged into the power supply

  Hello

  I have a M30X and months fans when I'm connected to the power supply do not stop. It's also stopping often enough. However, the laptop is not hot. Do you have any idea?
  Kind regards

  Armando

  Hello

  If you connect the adapter to the laptop of Toshiba power saver change consumption patterns. Maybe the power mode with a different setting in the a? Basic setupa?. Please check the cooling method and change it to lower the level.

  But of course, the dust and debris could have a bad influence on fan behavior.

• My iPod stop now, it won't turn even after be plugged into the power supply for more than an hour

  IiPod touch than 64 GB itself now cut an hour plug into the current af it starts

  Press the sleep/wake and home buttons and keep them for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Trying to find the plug and the power upgrade in a HP Pavilion Elite m9177c

  First time posting here so I hope I chose the right place for my question.

  I currently have a HP Pavilion Elite m9177c as a tempoarily computer until I can build my own. He was works fine but I found that this computer for all its good specs has only a 8500GT no idea why parent obtained through costco and gave it to use when my dell power supply gone bad and must be replaced.

  So I chose an EVGA 9800 GT

  http://www.Newegg.com/product/product.aspx?item=N82E16814130534

  But I discovered that my HP probably has just one power 350 watts (checked online still need to open the case to be exact, before buying it) while the card requires 400 watts accoring to the details.

  I tried to call HP support for dimensions and wattage supply type, but it was a chore. One guy said all the power supplies have the same size (maybe he meant the hp ones for my computer, but he never said so), another guy told me that without a guarantee that he could not even tell me the power and the third Lady said my dimensions are 9.6 inches by 9.6 inches or 24 centimeters. (do not know if she was trying to give me a microatx measure and I misunderstood the 3 as a 9 or what.) And the first guy claims it was a micro-ATX Power Supply, while the other comes from say atx.

  So after some googling I found these links

  1. http://www.censuspc.com/HP-Hewlett-Packard-5188-2859-350-Watt-SIRAH-350-Replacement-Desktop-PC-Power... - this seems to be what I have but he calls it the ATX 12v version

  2.http://www.911forpcs.com/5188-2859.html - this seems to be something I could go too, but I don't know if I might be better off with a full-on name brand like Corsair.

  3.http://support.hp.com/us-en/document/c01736200 - this is a different model of Pavilion Elite but so far it looks like mine how. The same video, for some reason any does not exist on the page for my model.

  I found two feeds that seem to fit the same dimensions as in link #1, but a larger 0.1 inch on a measure, but I hope that my hp case allows a slight wiggleroom.

  1. http://www.newegg.com/Product/Product.aspx?Item=N82E16817139028 - a 600 watt Corsair

  2. http://www.newegg.com/Product/Product.aspx?Item=N82E16817153151 - a 530 Watt Thermaltake

  Was just curious to know if anyone has better info on what exactly is in my case, and what is the best food to buy. I still intend opening the case before buying but just moved and such and call help tech kind of wore out me. I wanted to anyway just say that the computer has been much less the thing of the graphics card. Thank you

  Hello

  Type HP power supply (PSU) dimensions for cabinets mid-turn are: 5.9 by 3.4 by 5.5 inches.  If you get a power supply that is longer you might have problems of space between the PSU and the optical drives.  In addition, there are a stabilizing latch that cannot secure the PSU of stirring. This is a minor issue you should aware of your PC should be buy a power supply which is longer than the typical POWER HP block.

  The Corsair and both Thermaltake excellent food.  I would give the go-ahead for the CX600 Corsair ($50 after rebate) based on the cost, the total power available and the efficiency rating.

  This power supply is typical for your PC based on the part number indicated by HP PartSurfer.

• B40-30 screen fades on W10 when the power cable is plugged

  Hi all!
  Couple B40-30 weeks bought it y a. upgrade to Windows Home 64-bit 10, then did a clean install of W10. Installed all the drivers required from the Lenovo site.
  After that (I don't remember what it was like before the clean install) I faced the problem: when I plug in the adapter the screen turns black (gray). When I unplug the cable screens becomes visible. Laptop is not actually usable while it is on the power grid.
  I suspect that there is something wrong with the power management settings.
  Any help would be kindly apreciated!

  Thanks in advance!

  Well, updated the BIOS. Problem ended. However - Thanks for the help and good luck!

• Windows Vista 32 on Netbook MSI, I plug in the power adapter and a few minutes later get blue screen and restarts of netbook.

  I installed windows vista on my MSI Netbook and I did all the updates of windows.  After the 2nd service pack if I unplug the power and plug it later back I get the blue screen and restart. Let the blue screen so quickly I can read just debug USB driver or something. I tired it in safe mode, and it does not occur in safe mode. Can someone help me?

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack <=you want="" this=""> ). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Not plugged into the HDMI cable between the PC and the TV for watching movies, but it has no sound and the image.

  Original title: high speed HDMI does not.

  I plugin the HDMI cable between the PC and the TV for watching movies, but it has no sound and the image.

  Hi lisa,

  Try these steps and check the result.
  Step 1: Manage audio devices
  a. Click Start and then click Control Panel.
  b. click hardware and sound.
  c. under sound, click on manage audio devices.
  d. click on the playback device you want to output sound. Right-click in the empty space and click on see the disabled devices to see other devices.
  e. Select the device and click on set as default and then click OK.

  See http://support.Microsoft.com/kb/953500

  Step 2: Graphics output to monitor
  a. right click on the desktop, click chart options.
  b. output to monitor.

  Step 3: Adjust graphics hardware acceleration
  a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
  b. click Advanced settings, click the Troubleshooting tab and then click on change settings.
  Note: Some video card drivers do not allow allows you to change the settings.
  c. move the hardware acceleration slider at different levels and check the result.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• T520 display blanks and blinks when plug/unplug the power

  the subject says it all.

  brand new t520 with optimus (nvidia + intel) display adapter, display of 1920 x 1080.

  whenever I have more in or unplug the power, the white for about 2 seconds, then flashes back on.

  the problem occurs if the bios setting is integrated, discreet, or optimus and th problem occurs even if the display settings are the same in the profile of AC and battery power.

  is this normal? It's very BAD.

  Thanks in advance.

  George

  Looks like he made the 50 Hz / 60 Hz switch...

• installation a hp deskjet f4480, when I plug in the usb cable, my computer cannot find the printer.

  I have an hp computer, product number NY545AA #ABA, with windows 7, 64-bit and a hp deskjet F4480 printer. During the installation of the printer, I get to the screen that you can plug USB cord say printers and after about 2 minutes. It says no device found. The USB cord is plugged into the printer and the computer, the printer is on. Finally, I have checked, add a device later. I fight the computer and printer together, about 3 years, the printer never worked. I have downloaded new software and the HP driver for my printer, 1 week ago, it did not help.

  Try to use the other USB cable

• color scheme changes automatically

  whenever I restart my pc game of colors changes from a previous version of windows.

  Taskbar, startmenu and other things look like as if it was windows 95.
  so I have to manually change to windows 7

  Hi ShobhitJoshi,

  If another user account behaves as expected, it is possible that your user account is damaged. Follow the steps in this document to recover a corrupted user account.

  Let us know if that helps.