Commissioning: flashing, thick slider, f8 is not Vista Home Premium safe mode

Similar Questions

• lovely better does not work with windows vista home Premium what another program removes LSO and HOW to prevent the trackers?

  Question
  better privacy does not work with windows vista home Premium that another program removes LSO and HOW to prevent the trackers? Edit
  Details

  In current versions of Flash you can also do this via the control panel.

  • Control Panel > Flash Player, click on remove and erase data

• Windows Update does not work on Windows Vista Home Premium Service Pack 2

  I have a 32-bit Dell Inspiron 1525 laptop running Vista Home Premium Service Pack 2.  I also have Norton Internet Security, which expires on 27/02/2015.  I do not often use this laptop, but when I do I update and make sure that all is correct and up-to-date.  When I went to check my updates installed there not.  When I checked Windows Update update selection has been disabled.  I choose Check For Updates and a message came that it could not, because the service is not running.  I checked MSCONFIG and depending on whether the program was running.  There is no error code!  Then I ran the Microsoft Fix It program.  The main problem was not fixed, but have some unknown minor problems.  Computer laptop operating system has been pre-installed and never put.  Norton's anti-virus program used only on the computer!  Although I tried three times I couldn't send a troubleshooting report!  Before you run the difficulty this program I disabled the Smart of Norton Firewall and Antivirus so that there would be a problem!

  It was suggested to delete all folders and files in the folder C: / / windows/C:\Windows\SoftwareDistribution.  I am wary to do this, while others said that it worked for them.  Since it is a Windows folder, I'm not sure that there is not a better way to go!  I appreciate your help!  Marlene

  Internet Explorer is version 9.0.6.

  Note: The computer must NOT be connected to the internet or local networks (i.e. other computers) for an extended period (i.e. more than a few minutes) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself. Chances are that the "remains" of Norton here is your troublemaker.

  Roll up your sleeves & cross your fingers...

  ACTIONS

  [You may want to print these instructions for reference offline. IMPORTANT => NO SKIP & perform all the steps in a 1 uninterrupted session!  [If a step said to restart, restart! ]

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall Norton Internet Security and LiveUpdate and all Norton Add ons via Start | Control Panel | Programs: Programs and features.

  4 IMPORTANT! -Online make sure that the Windows Firewall is activated immediately after the reboot!  [Should be automatic, but I want you to check again.]

  NB: Now you're "working without a net": do not to ANYTHING else online (e.g., navigation reading E-mail; cat) until you have finished step #7 below!

  5. right click on the file that you saved in #1 above and select run as administrator to run the utility, and then reboot again.

  6. do a clean install of Norton Internet Security v21.x (using your product ID, if need be) & reboot. CF. https://support.norton.com/sp/en/us/home/current/solutions/kb20090708112600EN_EndUserProfile_en_us?ct=us&entsrc=redirect_pubweb&lg=en&product=home&pvid=f-home&version=1

  NOTE: do NOT activate or install Norton modules or toolbars (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a "not more than updated" or similar prompt.

  8. right click on the following link and SAVE the download to your desktop: http://iefaq.info/attachments/133/ie8-rereg.zip [1]

  Note: Good for IE9, too.

  8B. do a right-click on the file downloaded in # 9 a above (that is, ie8 - rereg.zip) and EXTRACT its contents to the desktop. This will create a new folder on your desktop named ie8-rereg.

  8. close all open applications (that is, anything with an icon on the task bar), open the new folder created in # 9 b above, double-click on the file ie8 - rereg.cmd to run the script and restart.

  9. reset Internet Explorer settings according to the instructions on this page: http://support.microsoft.com/kb/923737

  Note => for best results, check the option Remove personal settings .

  10. open Internet Explorer (only!) to http://support.microsoft.com/kb/946414 [ignore the title & symptoms].

  10 b. ignorant of the "not recommended" or similar warnings, run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [2]

  11 restart test once more and then launching a manual check of updates & see if updates all security related offered (e.g., KB2925418, KB2929961, KB2930275, KB2916036, KB2893294, KB2892075, KB2901674, KB2893984, KB2887069) allows you to install now. Follow all the instructions.

  12. in response to this post with a status report.

  Good luck!

  Next step: making sure that Java, Flash & Adobe Reader are fully patched.

  ===============================================================
  [1] source: http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en

  [2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• Windows Vista Home Premium and try to install Adobe Flash Player 11

  Windows Vista Home Premium and try to install Adobe Flash Player 11 to play video news/sport.  Cannot install - can be found in the list of prorgams but no size data indicated so it does not seem to have downloaded?  Any suggestions?  Running Winows Vista on ACER 5735 laptop.

  Jim SharpPM

  Hello

  This can help you:

  Download and run the Flash Player uninstaller program.

  http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

  Then download and install Flash Player; After unchecking installing Chrome and Google toolbar option:

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  If the problem persists, you may want to ask in the Forums of community Flash Player:

  http://forums.Adobe.com/community/flashplayer

  See you soon.

• I have a laptop Toshiba Satellite L305-S5894 with Windows Vista Home Premium installed (32 bit). Unable to get a backup to a flash drive. Error: 0 x 81000029

  Original title: I have a laptop Toshiba Satellite L305-S5894 with Windows Vista Home Premium installed (32 bit).  Unable to get a backup to a flash drive.

  After back back, very many updates of windows, my computer is full of problems and it is not representative of the restore points far enough back to correct.  I want really to save my data and programs for flash drive (s) and then go for a full recovery of the system (return to factory).  When you try to do the backup on a 4 GB USB key I get an error including 0 x 81000029.  I have seen posted answers to this.  Everything is included to aid Vista disk from the window which was not included when I bought my computer. Any help would be appreciated.

  Hello

  The following article should be useful. To use system recovery options, you have Vista installation disc. OEM (Original Equipment Manufacturer) repeatedly will install on the computer Windows recovery environment. To cross check if it is installed, try the following steps.

  1 start the computer and press the F8 key continuously to get advanced boot menu options.
  2. on the menu advanced startup options, check if the Startup Repair tool is in the list.
  3. If so, select it and press ENTER.
  4. If not, then you should organize a Vista installation disc.

  You may receive error messages when you try to perform a backup operation on a Windows Vista-based computer
  http://support.Microsoft.com/kb/950167

• Why are external USB drives not considered "Devices with removable storage" by Microsoft Windows Vista Home Premium?

  Readers USB Flash RAM, CD drive USB, readers of CD - RW USB, USB DVD +-RW drives and DVD-ROM USB readers are all handled by Microsoft Windows Vista Home Premium as "devices with removable storage".  To check this, look under the "Computer" entry in the menu 'start '.  However, if one uses as a USB external hard drive, that one is listed under 'hard drive '.  Programs noticed this, and some of them refuse to use it as a removable media drive, even if it is technically removable media, with its electronic and all.  It's kind of weird, because you can't remove the RAM on the USB Flash memory drives either.  Is there a way to get readers to external USB hard drive listed under "devices with removable storage"?

  -Yekta

  USB hard drives do not seem material RMB (removable media bit) bit set.

  I tried to format my external drive scratch NTFS (it has been formatted in this way, but I have re-formatted to ensure that), and it always happens as "Local Disk".  Also, I put the "Optimize for quick removal" option on the parameters of the disk driver hard software.  Which doesn't change anything either.  It came even as "Local Disk".  Finally, I formatted the drive with the FAT32 file system (use some flash drives).  The drive still shows as "Local Disk".  In the tests described above, I still "withdrew safely" the disk first and then re-connected.

  Thanks for the help, I now know it is a bit material in the electronic control unit which controls special registration of the drive in the operating system.

  -Yekta

• My desktop under Vista Home Premium does not connect to the internet.

  I have an Acer Aspire X 1200 desktop equipped with a NVIDIA NForce network controller. About 1 week ago I was browsing the internet, Norton anti-virus popped up and told me to renew my subscription. Now, I've never had Norton on my computer and when you click Remind Me later, my internet crashed. Now the whenever I plug my ethernet cable in the box, it connects to my router Motorola 5BS101 surfboard, but it does not connect to the Internet. I am running Windows Vista Home Premium. I tried to run malware programs remover, thinking it was a malware, nothing done. I tried to run to remove virus and nothing. I tried to change the IP address to my my laptop was broadcasting, because the internet runs on it, but no results. When using the command prompt to find out what the problem is, it says the active IP routing: routing WINS unactivated: No. looking at the stats of network adapters, it says active DHCP: No. address IPv6 local link: fe80::15f9:58e2:c2d8:66e7 10%
  Autoconfiguration IPv4: 169.254.102.231. Also using ipconfig / renew, said the message DHCP is not enabled.

  Are you sure you never had a Norton trial subscription on your computer?

  Norton will do strange things.

  http://www.Symantec.com/Norton/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN

  Try to use the Norton removal tool.

  The computer you are using now if you have an Internet connection with the other > download / save > copy to Flash Drive > transfer / install it and launch it on the other computer.

  See you soon.

  Mick Murphy - Microsoft partner

• Foxtabs does not. Using firefox 23.0.1. Vista Home Premium

  When I open a new tab I get a vacuum and my foxtabs are gone, I want to say foxtabs does not work.
  What can I do? Please, please help.

  I use firefox 23 and foxtabs 1.4.9. Windows vista Home premium.

  To better help you with your question, please provide us with a screenshot. If you need help to create a screenshot, please see How to make a screenshot of my problem?

  Once you have done so, attach the file to screen shot saved to your post on the forum by clicking on the button Browse... under the box to post your reply . This will help us to visualize the problem.

  Thank you!

• Satellite P200: Screensaver does not start on Vista Home Premium

  Hi people!

  I tried to apply the option on my laptop screen saver (Satellite P200), equipped with Vista Home Premium, but it does not; the laptop everything continues to run after the game of elapsed time. Is this a known problem with Vista? All suggestions received with gratitude, thank you!

  ChrisB

  Hello

  Can I ask you if you use the Microsoft wireless mouse?
  I discovered that this may affect the functionality of the screensaver on Vista OS.

  Strange!

  Then maybe you should check out this MS article:

  + The screen saver does not work when you use a pointing device on a Windows Vista-based computer Microsoft wireless +.
  http://support.Microsoft.com/kb/911895

  Feedback would be appreciated.

• Pavilion dv5020ca sound does not work after upgrade from xp to vista Home premium

  HP Pavilion Dv5020ca windows vista Home premium

  After the transition from xp to vista will not install the drivers for my sound card and the error message I got was

  cannot find media any help would be apperciated

  Hello:

  See if the works of audio driver XP installation...

  Download and run this driver.  If it automatically installs audio, very well.  If it's not... close any Windows error.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-42513-1&cc=us&DLC=en&LC=en&OS=228&product=3223544&sw_lang=

  Go to Device Manager and click on the multimedia audio controller needing drivers.

  Click the driver tab.  Click on set to update driver.  Select Browse my computer for driver and at the bottom of this window software option, select Let me pick from a list of drivers for devices on my computer.

  Select disc and go to: C:\SWSetup\sp33443\CPL30A5a and select the Conexant High Definition Audio from the list and see if the driver will install.

  Then restart.

• HP Compaq d530 SFF DIMMs do not recognize. Windows Vista Home Premium 32 bit - BIOS version 02.44

  Hello HP community!

  I recently got a HP Compaq d530 SFF of the company, where I had my work experience.

  Fortunately, I took their offer and took the PC at home, everything was going well until I bought myself some new DIMM from ebuyer.com.

  I again for a fact, the computer must DDR 333 MHz, PC2700 and it must be in DIMM format, so I went and bought 3x1Go modules. A few days later they arrived and I have them inserted in the computer, ensuring that two DIMMs was in blue locations and others (I wanted to keep a 256 MB module to) in the black sites.

  I have re-inserted power cable and tried to boot the PC, he showed me a BIOS message, showing that the amount of memory has changed, since the last boot. Once the configuration is presented, he acknowledged only the 256 MB module. I then turned off the computer, and then remove the 256 MB module, to see what would happen. So, I restarted the PC, and it gave me an error (not shown) tone. To which I then tried (needles) each DIMM different to see if one of them was vice. They are all gave me the same error tone. Since then, I've been running Windows Vista Home Premium, with 1 GB (4x256MB DIMM).

  Maybe someone has a suggestion how to fix this?

  I've already updated the version of the BIOS at 02.44 (later I could find).

  Thanks in advance!

  Yours sincerely Simon Cahill

  Beatsleigher,

  Not all memory is the same, even when picking PC2700. Did you buy non ECC?

  Here is a guide on the configuration of the memory for the D530SSF

• can someone tell me how to disable the guest account. I do not have the password and the administrator. my pc is vista Home premium

  can someone tell me how to disable the guest account. I do not have the password and the administrator. my pc is vista Home premium

  Hello

  Enable or disable the guest account the
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-the-guest-account-on-or-off

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Why a game not load in Vista Ultimate but in Vista Home Premium?

  Hello
  First time user form. I need help! I just bought the new Need for Speed Undercover PC game.
  I bought my son the game, so that we could play together online. His system has XP Pro installed on it.
  The game works very well. I have Vista Ultimate and will not go beyond the screen of the installation directory. I tried to install it on the new laptop from my wife who uses Vista Home Premium and it worked fine. So what would be the difference between these systems two vista? Am I missing something here?

  My Info system is as follows:

  Computer:
  	Operating system	Microsoft Windows Vista Ultimate
  	Operating system Service Pack	Service Pack 1
  	DirectX	4.09.00.0904 (DirectX 9 .0c)
  Motherboard:
  	Type of processor	CPU #0 AMD Athlon (tm) 64 X 2 Dual Core 6400 processor + 3.22 GHz CPU #1 AMD Athlon (tm) 64 X 2 Dual Core 6400 processor + 3.22 GHz
  	Name of the motherboard	ASUS M2N-E SLI motherboard ID

  Motherboard chipset

  Unknown

  System memory

  4 GB

  Type of BIOS

  Award BIOS Message ASUS M2N-E SLI ACPI BIOS Revision 1102 (11/09/07)

  Display:

  Video adapter

  GeForce 9600 GSO

  Monitor

  Reference Dell E207WFP [NoDB] (641806B9223L)

  Storage:

  IDE controller

  Double standard PCI IDE controller channel

  SCSI/RAID controller

  Microsoft iSCSI initiator

  Floppy drive

  Floppy drive

  Hard drive

  320 GB WDC WD3200AAKS-00SBA0 ATA Device

  Hard drive

  320 GB WDC WD3200KS-00PFB0 ATA Device

  Optical drive

  PLEXTOR DVDR PX-800 a ATA Device

  Optical drive

  PLEXTOR DVDR PX-800 a ATA Device

  Thank you for your help

  Is your drive E:\ where you install the game from? (e.g. CD or DVD)

  If so, the media may be bad.  The disk might have scratches or other problems, or the drive itself could be dirty.  A can of compressed air which will usually clear upward.

  The fact that the file is named autorun.dat is odd.  Any possiblilty that installation runs two times at the same time?
  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista Home Premium will not read/recognize/burn HD videos taken with my Canon camcorder HDD21/AVCHD (MTS format). Results in the message stating "Windows Media Player may not supported file type or the codec that the file compressed.

  I have a Vista Home Premium 64-bit, Service Pack 2 Dell.  He read/won't recognise no videos HD taken with my Canon camcorder HDD21/AVCHD (MTS format).  Each attempt generates a message stating "Windows Media Player may not support the file type or the codec that the file compressed.  I used a Windows 7 PC, which allowed me to play the video from the camcorder and burn a DVD of the video to share with the family.  I'd appreciate any help.  Thank you

  Information on the types of media files that supports Windows Media Player
  http://support.Microsoft.com/kb/316992

  For better support please try the Microsoft Vista for photos and video forum instead. http://social.answers.Microsoft.com/forums/en-us/vistapictures/threads

• I updated my Vista home Premium to Windows 7 Ultimate but my Nvidia GeoForce 9600 m GT does not work

  Hello

  I updated my Vista home Premium x 64 Windows 7 Ultimate x 64, but my Nvidia GeoForce 9600 m GT does not work. It says Version Missmatched.

  I have HP HDX X 18 - 1180US laptop.

  Is there a link for update or fix this problem?

  Thank you

  Chance

  Hello

  Please use driver for Windows 7 of this:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=3860290#N256

  Kind regards