How mod an image after loading it?

Similar Questions

• Communication failure USRP 2952R after loading image

  Background

  I recently started working with the NOR-2952R (X 310) and I'm trying to contact her on the 1 GB NETWORK card on a Linux server.  I am very familiar with the USRP N-210 and I'm looking to use it in a similar way.

  Problem

  My host uses UHD 003.007.001 so when I first performed a uhd_usrp_probe, I got the standard incompatibility message shown below, so I reimagee with the X 310 bit file comes from uhd_images_downloader.  The little-used file was usrp_x310_fpga_HGS.bit.

  Error: RuntimeError: number of firmware compatibility 0x3 WAITED, but had 0x4.0

  After loading the new image, I received x 300 errors of communication/fw as follows:

  [user@host ~] $ / usr/bin/uhd_usrp_probe - addr = 192.168.10.2 args
  
  Linux; GNU C++ version 4.4.7 20120313 (Red Hat 4.4.7 - 4); Boost_104100; UHD_003.007.001 - 0-unknown
  
  UHD error:
  
      x 300 failure communication fw #1
  
      EnvironmentError: IOError: x 300 poke32 fw - answer has expired
  UHD error:
  
      x 300 failure communication fw #1
  
      EnvironmentError: IOError: x 300 peek32 fw - answer has expired

  After a repair this problem for a few hours, I think I have bricked my device and I train using the JTAG interface to reimage the appliance.

  Question

  What is the right image to load for the UHD 003.007.001 driver and how to fix the failures of communication?  My server using a Broadcom NIC and I saw another post, suggesting that users had issues with Realtek NIC.

  Thank you.

  As a follow-up, my camera was indeed bricks by a corrupt charge.  I initially loaded (and subsequently recovered) my camera with the command below.

  [user@host ~] $ sudo/usr/bin/usrp_x3xx_fpga_burner - addr 192.168.10.2 - fpga-path /usr/share/uhd/images/usrp_x310_fpga_HGS.bit

  I was able to retrieve my device via JTAG with the same bit file and persisted in my image with the same command above.

  Go Hoos.

• Position an image after it is loaded

  I have placed an empty movieclip on the stage and use the following AS2 to randomly load an image inside of an xml file. What I can't understand, but (and Yes, I've spent hours Googling it) is to know how to position the image on the stage at the top right. I know it must be picture_mc.x = Stage.width - picture_mc._width; or something like that, but where to put this code so that it is the width * after * the image is loaded?

  xmlImages = new XML();
  xmlImages.ignoreWhite = true;
  xmlImages.onLoad = geeklog;
  xmlImages.load("..) ("/ flash/people.xml");

  function Loadimages() (loaded) {}
  If {(responsible)
  xmlFirstChild = this.firstChild;
  imageFileName = [];
  totalImages = xmlFirstChild.childNodes [0].childNodes.length;
  for (i = 0; i < totalImages; i ++) {}
  imageFileName [i] = xmlFirstChild.childNodes [0] Sublst.ChildNodes(1).ChildNodes(0) [i].attributes.title;
  }
  randomImage();
  }
  }
  function randomImage() {}
  If (load == filesize) {}
  var ran = Math.round (Math.random () * (totalImages - 1));
  picture_mc.loadMovie (imageFileName [a], 1);
  }
  }

  If you do not know the dimensions of the image beforehand, then you must use MovieClipLoader.loadClip () instead of loadMovie.  The reason being, loadMovie can't have a listener events to detect when the loading is complete, but MovieClipLoader.loadClip () don't.  If you look to the top of the MovieClipLoader class in the Flash help files and then look at this category addListener method, there is an example that will help you get it coded for your situation... you can use the onLoadComplete rather than uses of examples (onLoadInit)

• Why my dvd player on my computer will display file after loading adisc stop mode

  my dvd on my computer drive show that stop mode file after loading on it does not show movies

  Hi Carolina,.

  (1) this only happens with some specific DVD?

  (2) if it works well before?

  If I understand correctly you want movies to start playing as soon as a DVD is inserted, if please correct me if I misunderstood or provide additional information to help you better.

  
  Method 1: you can follow the steps mentioned in the link below to solve problem of AutoPlay
  AutoPlay does not start when I insert a disk or connect a device.

  
  Method 2: Alternatively, you can play the video files manually. To do this, follow the steps below

  (a) click Start, go to computer, and then open the DVD player

  (b) now, try to play the video file by double clicking it

• Problem loading the images after update of the plugin

  I had installed the following, and code worked great:
  BlackBerry component Pack 4.5.0.14
  BlackBerry JDE plugin for Eclipse 1.0.0.50
  Eclipse 3.4.1

  I've updated the plugin from 1.0.0.67 and copy the following code no longer works:

  Private static final Bitmap _bitmap is Bitmap.getBitmapResource ("splash.png");.

  My classes are in com.bbbj

  My images are in com.bbbj.img

  As I said, it worked before the upgrade and not after the upgrade. No other changes have been made.

  Now, none of my images are loading.

  Any ideas?

  I have re-installed the update and the problem doesn't happen anymore.

• 6 of Lightroom. When I opened to develop &amp; load an image from the image after is removed a pale blue screen.  If I shared the screen I can see the front of the image but the image after rest as a blue screen. Clues please?

  When I opened to develop & load an image from the image after is removed a pale blue screen.  If I shared the screen I can see the front of the image but the image after rest as a blue screen. Clues please?

  Most likely, LR has problems talking to your video card.

  In the Preferences dialog box, tab Performance, disable the use of the GPU.

• GPU acceleration disabled after loading image

  Recently I bought Photoshop CS6. I installed Windows 7 and run updates. I also updated my graphics drivers to the latest version (catalyst 12.8). I have an AMD Radeon HD 7700, which has 1024 MB of RAM. This card is on the list of supported cards.

  When I first load Photoshop I can look in 'Preferences-> performance' and see that the GPU has been detected correctly and "use graphics processor ' is checked.

  But after loading any image, including the use of "File-> new" to open a white blank image, the GPU is disabled. Look back in "Preferences-> performance" he says:

  "no standard available with photoshop gpu option."

  What can I do about it?

  You probably want to go back to pilots 12.6 - 12.8 seems to have problems.

• How to assign a value to a control to display after loading the page?

  I use JDeveloper 10.1.3.3 using ADF.
  
  How can I run a support bean method to populate a control immediately after loading the page. My intention is to populate a control hidden with the session id. The code that I would run is something like this:
  
  FacesContext ctx = FacesContext.getCurrentInstance ();
  ExternalContext ectx = ctx.getExternalContext ();
  HttpSession mySession = ectx.getSession (false) (HttpSession);
  String sessionId = mySession.getId ();
  
  Where would I put this code?
  
  Thank you
  
  John
  
  Published by: John Matozzi, October 28, 2008 15:47

  Hi John,.

  create a method called getSessionId returning a string in your bean support.

      public String getSessionId(){
  
          FacesContext ctx = FacesContext.getCurrentInstance();
          ExternalContext ectx = ctx.getExternalContext();
          HttpSession session = (HttpSession) ectx.getSession(false);
          return session.getId(); 
  
      }
  

  then in your page you can use the link editor to call the method and display its value.

  Brenden

• How can I stop Firefox to jump to the bottom of the page after loading

  the page jumps down to halfway after loading

  Some added addons toolbar and anti-virus are known to cause
  Firefox issues. Disable all of them.

  Does this happen sometimes / much?

  Is the address of something you typed or a link or a bookmark?

• Images not load - but work in preview mode

  HI -.

  I was wondering if someone can help me.  I'm kind new to Dreamweaver and I can't seem to figure this on my own.

  I use Dreamweaver 8.  I developed a web page based on a template in which, everything works perfectly in the "Preview" on all browsers.  But when I downloaded the files on my remote to the accommodation, the base model not load images (found in the 'images' folder) on the page. The pictures I added to the template myself, found in the 'images' folder ($ 200,000 in... and the photo down) load.  If some of the images in the images folder load some aren't.

  I checked the folder of Images at the remote site, and they all seem to be there.  I also checked for broken links, and I do not receive all (I don't know if it will help w / lack of images or not, but I will try everything I can think of).  I also checked to see if there is a CSS stylesheet and it was not provided with the template (there are some CSS info in the code on the html page).  Image sizes are all pretty small.  Can someone help me with this?

  You can view a page at: http://www.200kin5months.com/squeeze-video.html

  Thanks in advance to anyone who might be able to help!

  Stacey

  PS - I've attached a screenshot of preview of Dreamweaver to show what it is supposed to look like.

  Your Web server runs on an operating system that is case-sensitive. You seem to have downloaded a pictures folder, but not a folder of images.

  You do not have a file here:

  images / squeeze - video_425x344_r9_c6.jpg

  But you don't have a file here:

  Images / squeeze - video_425x344_r9_c6.jpg

  So you'll need either change all your image / links to point to the Images /, or download another folder called images.

  Or, if you want to use a single folder, and if your local file system is not case sensitive, you might be able to do in the DW file panel. Here is a method that you use all have them in a folder called images.

  1. SAVE YOUR FILES IN SITE
  2. Rename some Images of Foo (allow DW update links)
  3. Images and rename Foo (allow DW update links)
  4. Download the images and all the files that have changed the DW
  5. Delete the folder of Images online

  HTH

  --
  Mark A. Boyd
  Keep-on-Learnine :-)

• Firefox Thunderbird 29 24.5. Images not loading on mail entering.

  Why not the images that are embedded in a display of electronic mail entering. Just get an empty box where the image should be.

  If you restart your computer in safe mode the images are displayed.

  Restart the operating system in safe mode with network. This loads only the basics needed to start your computer while allowing Internet access. Click on your operating system for instructions on how to start in safe mode: Windows 8, Windows 7, Windows Vista, Windows XP, OSX

  If the safe mode for the operating system to resolve the problem, there are other software on your computer that is causing problems. The possibilities include but not limited to: AV scanning, virus/malware, background downloads such as updates of the program.

• Tecra A - Toshiba Power Saver error after loading the OS

  I have two problems with my XP Pro SP3 operating system

  (1) immediately after loading the OS, I got this error message

  http://photoserver.WS/images/oCVJ4c25d94898215.PNG

  (2) and my job doesn'r to reboot. Stüch Windows HE is shoting down, and I have to manually to swith out of turn.

  How to solve this problem?

  I don't know much about your model, but I think you should update a powerhouse of Eve:

  [Toshiba drivers | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

• How to map image an image that is 100% up to 100% width?

  How to map image an image that is 100% up to 100% width?

  I have this image that I need to adapt to 100% on any browser, and I don't know how to make image map because it dones not match selected after loading in the browser area.

  Thank you

  You can not.  Contact information for the access point have not re-scale with the image.   If you use an image map, use the height and width in pixels.  Make it small enough to fit in smaller devices.

  Nancy O.

• How long does take to load the Apple Watch?

  Before you buy the Apple Watch, I would like to know how long it takes to load completely.

  See: http://www.apple.com/watch/battery.html

  Charge time

  About 1.5 hours to 80%

  About 2.5 hours to 100%

  Testing conducted by Apple in March 2015 using pre-production Apple Watch and software associated with an iPhone using the pre-production software. Load times are from 0% to 80% and 0% to 100% using the MagSafe inductive charger included. Charging time varies depending on environmental factors; actual results will differ.

  You can restart the watch earlier after the charge, if the battery is not fully charged.  Restart requires at least 10% reserve battery.

  https://help.Apple.com/watch/#/apd2b717523a

• Reset Windows Picture and FAX viewer as the default value for jpeg files after loading of Corel

  I put Windows Picture and FAX Viewer by default to open jpeg, tiff and other pictures, so it appeared as an option in the drop-down list to view attachments that have been downloaded. After loading the software Corel Draw, it is now the only option to open photo files even if Windows Picture and FAX viewer is always defined as the default value. How to restore Windows Picture and FAX Viewer as a choice?

  Have you looked into the Corel software preferences to see if you can cancel these associations?

  There is usually backup keys are created in order to return to the previously used application.