Compaq dc5800 format microtour: Compaq dc5800 format microtour - 4 TB hard

Similar Questions

• Installation of restore in Compaq Presario V2000 after replacing the hard drive disk

  I have a Compaq Presario V2000, I had the hard drive replaced at CompUSA.  The drive is a 250 gig to replace the original HD 40 gig.  When you load the restore of the operating system (Windows XP) disc nothing happens just a note on the ethernet controller and the media test failure then exit ROM PXE.  How to load the operating system.  I follow the procedures on the Web site?

  Thank you very much.  After a discussion at CompUSA, they decided to try another HD concert 160 instead of 250. Wallah... OS began the installation of restore disc program.  It is a problem with the new hard drive.

  Help a what to do CompUSA actually tech the problem finally.

  Thanks again!

• Format a new external hard drive

  I have a new external HD to format for OS X.

  http://www.wdc.com/en/products/products.aspx?ID=1490

  I'll use for the backup of photos (in addition to other backups I have).

  1. do I need to do a Partitions (TLE say to choose a single Partition and perhaps other documents coming in another Partition)?

  Or I can make 2 folders: one for photos and other documents - both on the same a Partition? If no necessary partition...

  2. If I have to make a Partition (s), can I have them before deleting the disk or after?

  Thank you.

  

  If you erase the disc you will erase all partitions and volumes of storage on the disk.  You don't need to create separate partitions for images and documents, but you can if you wish.  Think of it as a drawer inside a closet - you want to store your photos in two separate drawers or in the drawer?  When you allocate space in a partition of that space is reserved for that specific partition.

  A partition is logically a storage device is divided into separate storage parts.  When a partition is formatted with a file system, it becomes a storage volume.  You need at least one partition formatted in order to at least have a single storage volume to store files on a storage device.

  There are a lot of resources are you can read: http://www.howtogeek.com/184659/beginner-geek-hard-disk-partitions-explained/ or search Google to learn more.

• Compaq elite 8300 all in 1: Compaq 8300 allin 1 bought with HARD drive erased

  HARD drive is completely wiped and no information system have also tried the keys F11 and it too is not go... can I get HP restore disks

  You can buy all of the surgeons computer recovery discsHERE. Just put the model number - need a more complete than all in a single desktop Compaq Presario.  Is HERE IS a SAMPLE for model number CQ1-1130.  For the model that you own should be the same price.

• Formatting and divide the HARD disk

  Hello
  Could please tell me how to format my hard drive (Toshiba 40 m - 184 AR) and divide it more than the drive C, D, E...
  Do I need a special CD for this?

  Thanks in advance

  Hi Mohamed,

  You can partition your hard drive for a full installation of the operating system using the recovery media provided by Toshiba, when you bought your laptop. However, this will cause the re-installation of your system.

  If you have already installed your system and wish to keep it, you will need a software product to handle the repartitioning without crashing your system for you. These products are available commercially (Norton Partionmagic for example). Try Googling for them.

  HTH

• Problems of formatting of the new hard drive in Macbook Pro

  Hello

  My internal hard drive in my MacBook Pro mid 2012 broke down. So I installed a new hard drive a ST1000LM014 of Seagate 1 TB hybrid discs which according to IFIXIT.com must be compatible.

  I then boot the server Apple Macbook and party in disk Utillity to format the hard drive. The hard drive is visible and I'm then in the partition, choose the 1 partition, Mac OS X (journaled) + GUID. But while the partition that I get the error message failed to file system format.

  I tried different options in disk Utillity and I am able to format the disk using FAT or ExFat. But it does not help me to use my mac hard drive.

  Does anyone have any ideas on what to do? And it does not seem like a problem with the functionality of the hard drive?

  Thank you

  You must select the disk of material-name (upper, outermost level descriptor), not Volume name.

• HDD Recovery format all the drive HARD Equium P200-178

  Hello

  I need to reinstall Vista on my laptop.
  The question is: is the recovery of a partition option erases all partitions of data?
  Both with bones and the other with the data?

  I've been trying to find out on the forum.
  Some say the recovery cd to clean all partitions, but drive HARD recovery has the option to format only partition C

  Hello

  Well, as far as I know the HARD drive recovery procedure is the same procedure as the use of the Recovery DVD.
  In both cases the laptop will be set to factory settings which means that you will get the same data on the HARD drive as on the first day of purchase
  So it need to format the HARD drive and should restore again uses the image of Toshiba.

  But if you want to know if the second partition will be deleted and then created again and then store a small file on the second partition and then perform the procedure of HARD drive recovery.

  After installing the OS has finished go to the second partition and check if the same file that is always present on the second partition.

• Presario CQ5110F: COMPAQ Presario CQ5110F adding a second hard drive and...

  Good so I took the lead when writing my original post on how to combine the two computers successfully.
  Not enough research, no question, just a little say aloud... Sorry about that.
  http://h30434.www3.HP.com/T5/desktop-hardware-and-upgrade-questions/HP-Pavilion-slimline-s3505f-amp-...

  I had little time today messing with both ' puters and discovered...
  They need a good cleaning and had.
  The noise of the Presario is indeed the fan on the radiator, it's just old and tired. Who cannot be strong in a music room; new fan may not be too expensive.
  So I decided the Presario is my starting point.

  I would add the hard drive of the Slimline as slave; they have different connectors tho.

  (1) if I just unplug the V2000 CD reader (that has the straight plugs) and use them to connect the second hard drive will I just lost my CD player? It is very good.
  (2) what parameters of rider (if any) do I need to have on each disc? Do not see outside the car Slimlines.

  I looked closer 2 slots for RAM and noticed that beside them there seems to be 2 places in addition to the Board of Directors, unused with no present holders plastic.

  (3) is it possible to add more slots and double the RAM? I would get 8 + GB and a 64-bit system end by ;~)

  Neither office seems to have the ability to run 2 monitors as is. No problem 29 "should do for now.
  Can't see a way to take the card out of the Slimline wireless and put it in the Presario. Internet not immediately necessary, hard connection cable always an option.

  All the other tips and advice on how to optimize my sytem are also welcome.
  Thank you for your time and helping an old guy handyman.
  See you soon!

  COMPAQ Presario CQ5110F (2008ish)
  Processor AMD Athlon X 2 7550 Dual Core 2.5 GHz = Socket: AM2 +.
  Card mother = Narra5 M2N68 - THE Chipset: NVIDIA GeForce 6150SE nForce 430 Socket: AM2 +.
  Memory RAM = 4 GB RAM DDR2 DIMM PC2-6400 MB/s
  = Video/graphic card nVidia GeForce 6150SE integrated graphics
  Sound/Audio = Audio integrated Realtek ALC888S
  Hard = 320 GB SATA 7200 RPM drive
  CD/DVD Player = DVD +/-R / RW 16 X SuperMulti SATA drive
  OS = Vista Edition Windows Home Premium SP1
  Power = 300w
  Case = Mid size 38cmHx17cmWx43cmL ATX

  Hard drives has no different connectors if they are both SATA specifications like other post indicated.

  There is no adjustment to make on hard disks of the rider SATAS. According to me, that one can think of the old school the IDE drives.

  ) If I just unplug the V2000 CD reader (that has the straight plugs) and use them to connect the second hard drive will I just lost my CD player? It is very good.

  The image below is a diagram for your motherboard. You have enough SATA ports to be used for the second and even a third hard drive.

  

  DDR2 memory modules can be a little difficult to source. The current generation of add-on memory is the DDR3 specification.

  Perform a Google or any search engine is your preference in the memory of the source by using the update of Compaq presario CQ5110F RAM as keywords.

• How to format an old drive hard second with XP OS on it?

  I upgraded my PC from XP to Windows 7.

  I have 3 HARD disk attached to the motherboard.

  However I forgot to disconnect all HARD drive I want to install Win7 on when I started the installation, Windows 7 has been installed on a HARD drive that had no operating system installed on it.

  I want to reformat the old HDD XP wit on it now, but can't do.

  I tried disk management and get the error message

  "Windows cannot format the partition on the disk system.

  I have even tried using the XP Installation disk to force a format but kept see a BSOD.

  I can't believe that it may be difficult to format an old HARD the OS drive?

  Can anyone help?

  Thank you

  Disconnect the drive that has installed XP, disconnect from the other readers of Ant and leave only the drive which has Windows 7 installed on it. Then try to start, the following, you should message or white screen. Follow the list of instructions below;

  BOOTMGR is missing, message or black screen with cursor flashing
  This error message appears when the bootmgr file is damaged or missing or the BCD (Boot Configuration data) is damaged or missing.

  Follow the steps described in this article from Wiki:
  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-system/Bootmgr-is-missing-message-or-black-screen-with/73fef5b7-5a7f-4910-a2b0-7219e9ec1646

  After completing the steps described in the Wiki article, you should be in charge of Windows 7. Shut down the PC and connect the XP disc. Turn on the PC and after loading Windows 7 try to delete the partition on the drive with XP installed. After the deletion of XP partition try to restart the PC to make sure that Windows 7 still load. If it isn't ready to reformat and use the old XP drive for other purposes. If Windows 7 does not start, repeat the step in the Wiki article.

  J W Stuart: http://www.pagestart.com

• I formatted the disk.how hard to recover data?

  In my laptop one disc has been formatted there.i and he did two partitions at this point I do not copy some files. How to recover files?

  Hi jadunathhota,

  There is no Microsoft recovery tool to recover the lost data. However, you can use your favorite search engine and download any third-party data recovery software.

  
  Note: software use of third parties, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope the helps of information.

• try to format 1 terabyte external hard drive to fat32

  I have a 1 external terabyte I want to format it for use with my ps3.

  Impossible to find a program that would create a large partition so I created a large NTFS.

  run the command from command line format using fat32.

  He ran for more than 13 hours. When I came home I got a message saying that the drive was great to format in fat32.

  What is the largest size I can format the drive using fat32? is it possible to format all?

  See: http://windows.microsoft.com/en-US/windows-vista/Convert-a-hard-disk-or-partition-to-FAT32-format

  If you have more than one partition of 32 GB.  Personally I keep the 1 TB for Windows 7 drive and buy a lot harder for a PS3.

• What is the preferred method of formatting and partitioning a hard drive?

  Format the hard drive... and build a Partition... (question of part 2)

  I finally get my CD with Windows 7 and ready to install... I just thought I would ask the "Perferred" formatting the hard drive method...? Quick format in fat files... a quick format in NTFS... elongated format... What is the formatting the hard drive perferred method... Also... build a partition to install Windows 7 within this partition... It is also the preferred method... ?? You don't computer Pro to always build a partition and install the Windows operating system inside the partition... ?? What is the perferred method... ?? I would like to try this for the first time... !!! Is it easy to do... ??  What size partition can I build... ???

  During the installation process, you can format/delete/create partitions on the disk hard if you perform a custom installation. Data backup before installing Windows.

  Using NTFS with Windows 7 system.

  Most people do a quick format.

  Install Windows 7 on a partition with a minimum of 60 GB. 100 GB or lager is recommended. You can use all the hard disk to the Windows partition if you want to.

  Format/delete/create the partition with the Windows 7 installation DVD, you can:

  1 boot from the DVD

  2. click on install now

  3. in the configuration screen, click Custom (Advanced)

  4. click on Drive Options

  5. you have the option to format/delete/create partitions and choose size during the creation of their

  6. continue with the installation.

  Installation and reinstallation of Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  Activate Windows 7 on this computer

  http://Windows.Microsoft.com/en-us/Windows7/activate-Windows-7-on-this-computer

  Case of failure of the online activation:

  Call Microsoft use the manual phone Activation

  Note: If you always install Windows page enter your product key, do not enter your key and uncheck the "Automatically activate when online" then click OK/next to complete the installation.

  1. open Windows Activation - click on the Start button, right-click computer, click Properties, then click the option to activate Windows now or change your key.

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated phone system.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. dial one of the available phone numbers listed.

  7. do not select all options and wait for a person pick up, then explain what happened.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Compaq 6000 Pro: 6000 pro complete hard drive

  My HARD drive is nearly full, so I'll change it with an SSD on 0ne terabite, how do I transfer my operating system and the programs over to the new drive? Thank you for your help.

  I had a lot of success with Samsung EVO 850 and 840 SSD, SSD Crucial. The sandisk conversion kit will make this simple.

  Hybrid hard drives are certainly not identical to an SSD. They don't have the super speed or the overall coherence of BIOS.

  I got a note that explains this in detail, but HP decided, just over a week, there is or not, to remove our ability to do information and turorial stickies. This is why you don't see many, if any stickies.

  The following illustration shows what works and what's not for your PC.

  

• Compaq presario c795tu model - problem IDE hard drive /disques

  Hello please help me... In my laptop model no presario c795tu, I found some virus a few days ago and I removed it. From here only, my laptop gives error windows repair and SATA / IDE hard disk error.

  Whenever I connect to my laptop. All data are accessible, but it is automatically hidden.

  It gives the error 4 - 5 times this system has a problem in IDE / Sata hard disk. Kindly it reboot and it restarts automatically.

  Please help me how I can solve my problem.

  Diakite says:

  Hello please help me... In my laptop model no presario c795tu, I found some virus a few days ago and I removed it. From here only, my laptop gives error windows repair and SATA / IDE hard disk error.

  Whenever I connect to my laptop. All data are accessible, but it is automatically hidden.

  It gives the error 4 - 5 times this system has a problem in IDE / Sata hard disk. Kindly it reboot and it restarts automatically.

  Please help me how I can solve my problem.

  Press the power button and then press the F10 key to access the BIOS. Run the hard drive Diagnostics. What I saw in my investigation shows it's a 160 GB SATA hard drive.

  There are a few ways that you can use to solve the problem.  You can try the online scanner of ESET.com to remove the offending code or you can try Malwarebytes. MalwareBytes is recommended by some members of the forum, and there is a free version. The ESET online scanner is also free. I prefer the ESET online scanner.

  The simpler but more radical solution would be to make a recovery to factory state using the HP Recovery Manager. You should be able to access the market with the F11 key recovery manager. If this isn't the case, you can use your set of recovery disks. The downside of the HP recovery solution is that you will lose all data and programs you have on your laptop. advantage is that everything works again once you have installed the drivers.

  Best regards
  ERICO

• Compaq presario CQ56 103TU: upgrading laptop hard drive

  Our computer comes with a 320 GB hard drive. I would like to replace it with a larger. How can I find the larger sizes that I can use without going into what anyone other than the typical installation and the complicated transfer system? I saw a hard drive 1 TB, put on sale. Is - too big for my computer? Or maybe something in the order of 500 to 750 GB. Thank you.

  Any laptop that can take a 320 GB drive can also take a 1 TB drive.  The older player size limit was around 120 GB - and that was due to the limits dealing with old BIOS, which disappeared a long time ago.

  Also, a very easy way to replace a drive is to buy an external adapter that can connect the new drive via a USB post and 'clone' of the old drive to the new using a third-party product like Macrium Reflect.  I also use this to "clone" SDD HARD disk when I replaced the drives in laptops.

  Good luck