Computer description not found when I go to the network view

Similar Questions

• Error 'nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll is not found"when you connect to the computer.

  Original title:

  Problem: I use DeLL Desktop.When I connect, these messages appear on my screen: nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll not found. Re-installing the application may fix the problem. Pls help. Thank you.

  Hello
  1. what version of Windows is installed on the computer?
  2. are you aware of any changes made to the computer, before the show?
  Assuming you have Windows Vista or Windows 7, follow the steps mentioned below.

  Method 1:
  

  Step 1: Perform a boot minimum troubleshooting and check which application reports this error
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Step 2: reinstall the application.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 2:
  Run an analysis of auditor of system files on your computer and check for the issue.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• "Row not found" when you call setCurrentRowWithKey on a view 'offline '.

  Hello.
  I use JDeveloper 10.1.3.4. I can see 'offline' with lines populated by program, not based on a query. It has an attribute of type number marked as Key attribute and this.setManageRowsByKey (true) in the Create method of the ViewObjectImpl class. When I try to call setCurrentRowWithKey I get the ' oracle.jbo.RowNotFoundException: Houston-25020: line of sight from the main oracle.jbo.Key [23540] not found in PozitiiIntrariVwIterator) "exception.
  When there is no key atrribute this point of view and not setManageRowsByKey (true), I don't get this error, however, when you run the following code, I get an error:
  Set of keys to the value = this.getTblPozitiiIntrari () .getSelectionState () .getKeySet ();
  Iterator keyIter = keySet.iterator ();
  While (keyIter.hasNext ()) {}
  _Key key = (Key) keyIter.next (); -> java.lang.ClassCastException: java.lang.Integer
  
  What I am doing wrong? What can I do to get the app works on both cases?

  change key (Key) = keyIter.next (); = (Integer) keyIter.next () key whole;

  tableComponent.setRowKey (_key);

  Object ViewObjectClassName = tableComponent.getRowData ((ViewObjectClassName));

• for some reason any my itunes on my computer does not start when I click on the itunes I have con

  even when I go to the start menu and click the itunes icon it starts

  Hello
  ·         Did you the latest changes on the computer before the show?
   
  You can follow the steps in troubleshooting the link and check if it helps.
  iTunes for Windows XP: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues
  http://support.Apple.com/kb/TS1421

• Another computer is not accessible in Windows XP over the network.

  . DETA transfer isn't dan

  Shows network and sharing Center is connected, but the computer is not available in windows xp.

  Hey akhil,.

  Looking for a conflict between two computers browser. I'm not
  talk about Internet Explorer here. The browser is the program that allows any computer see any another computer on the local network. On a local network with two computers, you must run a browser on a single.
  Make sure that the browser service runs on one of the computers.
  Control Panel - Administrative Tools - Services. Ensure that the computer, browserand support TCP/IP NetBIOS, services the two show with status = Started.
  Stop and disable the service browser on the other computer.
  After checking / deactivation / activation as described above, two off computers, then turn them both back.

  The program Microsoft Browstat will show us what are the browsers (I'm not
  talking about Internet Explorer) you have in your domain / workgroup, to any
  time.

• After deployment got "404 Not Found".  How to find the correct URL?

  For the experienced:
  
  Preparing to deploy my application, I use JDeveloper 10.1.3.4 to deploy the application on the server standalone oc4j included in JDeveloper. After deployment, I get the error "404 Not Found" when trying to invoke the application in a browser. The deployment seems OK, because the log in JDeveloper window showed no error executing deployment from inside JDeveloper. So I guess the question is how to find the correct URL to invoke the application. Here are the steps I took to make the deployment.
  
  First, I installed the standalone oc4j by running the .bat < jdev_home > \jdev\bin\start_oc4j file. Installation is OK because I have deployed the application SRTutorial and invoked successfully in a browser.
  
  The WAR file has been created by right-clicking on the ViewController project and select this option to create a WAR file. At the root of the application its own name, I typed "ZB" in the area of the root of context.
  
  Then in ViewController-> resources, right_click the deployment file (ZBOV.deploy) and chose ' deploy to "the local_standalone_oc4j. Messages in the Journal of JDeveloper window for deployment are all nice and clean without errors.
  
  I then used this url to invoke the application deployed in a browser:
  
  http://localhost:8888/ZB/faces/staff/login.JSPX
  
  But I got an error "404 Not Found". Immediately, I tried citing the application of SRTutorial, and it works fine.
  
  Login.JSPX is one of the pages of the application. In the browser of the application, it is with other files in the content of ViewController/Web/personal folder, so I used /staff/login.jspx after ZB/faces.
  
  What could be wrong? If the deployment is really successful, how to find the correct url to invoke the application?
  
  Thanks a lot for your help!
  
  
  Newman

  Hello

  According to me, there are 2 possibilities (could be more that I'm not aware of if :)).

  1. your deployment profile has been changed to use a different context root.
  2. your request has not been installed correctly.

  To 1, try to create a new deployment profile and leave the values by default as it is the case, run the jspx page, get the root context, deploy the application to a different OC4J instance (using the new deployment profile), and then run the application with the context root, that you received from the embedded OC4J.

  For 2, check the log file and see if you had any error / exception.

  HTH.

  Arun-

• McAfee file is not found when I try to start the services stopped in the Computer Management Console.

  McAfee services ceased.  When I go to Services and try to start I get an error 2, "the file is not found."  I look in the programs and the file seems to be there.  I believe that the services were stopped due to Game Booster (which has stopped some services when you are playing a game).  I had turned on Game Booster, then I shut down the system without return - turn off Game Booster I believe that some of my services won.

  Uninstall mcafee in any case, his despair. Or uninstall it then reinstall it

• When the Admin sign on the office comes to the top, but after that the computer does not respond when the user tries to do anything. There are actually turns off the computer with the power button.

  Original title: user profile

  My administrator user profile does not work properly, but I have a user profile that has activated the parental control that worked well for about a year and yesterday when this user logs on the desktop comes up, but after that the computer does not respond when that user tries to do anything. There are actually turns off the computer with the power button.  I ran a virus scan and spyware scan in my user admin profile and he has not found anything.  I don't know what to check.

  Hello rhunter15,

  There may be a program to interfere with Parental controls so that we can try a few things to see if we can determine the application or program that is causing problems.

  First of all, we run System File Checker to see if you have a corrupt file system.

  • Click Start
  • Click on all programs
  • Click Accessories, and then right-click on the command prompt.
  • Select the Security tab and choose "Run as Administrator"
  • Click on command prompt
  • Type SFC/scannow.

  It will scan and repair any damaged operating system files.

  To determine if there is a program because of a conflict, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base.

  KB 929135 - how to solve a problem of performaing a clean boot in Windows Vista.
  http://support.Microsoft.com/kb/929135

  Once you have finished the clean boot, check again and see if you get the error of parental control.

  If please post again and let us know if that helped pinpoint the problem or if you still need help.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Get a Bluetooth device message"driver is not found when you connect Bluetooth

  original title: Bluetooth connectivity problems

  Hello

  I own both a T-900 of Fujitsu (64-bit Windows 7) and a HTC Rezound and have been using bluetooth to transfer files between them until a few days ago. Out of nowhere, bluetooth does not work anymore and now shows that "Bluetooth device" driver is not found. I tried to uninstall and reinstall it from many different sites, try different, but for some reason bluetooth packages some do not fix the problem of Bluetooth device. My computer can not find other bluetooth devices, and my phone does not recognize my computer as a bluetooth, even with the two device are detectable. If someone had a similar problem or knows how to fix Bluetooth device? Any help is greatly appreciated!

  Hi autumnv92,

  Were there any changes made to the computer before the question?
   
  Check out the following and check:
  Method 1:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
   
  Method 2:
  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device
  http://support.Microsoft.com/kb/2654568

   
  Method 3:
  See the following steps:
  1. turn on your bluetooth device
  2. right-click the icon for the device in the system status bar
  3. choose / click on "show bluetooth devices.
  4. There will be a list of devices you never associate (like your phone, another laptop, etc.).
  5. simply remove from the list.
  And the warning like "(pilote de périphérique Bluetooth périphérique est introuvable) will not show up again."
   
  Method 4:
  Bluetooth devices do not work correctly on a computer that is running Windows 7

  http://support.Microsoft.com/kb/980396

  
   
  Also check these links for more information:
    
  Add a Bluetooth device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Connect to Bluetooth and other wireless or network devices
  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Change settings for a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

   
  Hope this information helps.

• Tab Counter 1.9.3 says not found when apllication downloaded sound

  Tab Counter 1.9.3 said apllication not found when its downloaded, it is there in the downloads but open and work habit

  Well Yes, it works great now thanks a lot

• When he puts an end to Firefox 3.6.6 firefox.exe continues to turn, visible in the Manager of tasks (XP) and stimulates the activity of the CPU up to 60% with the danger of overheating. Have not found an appropriate response with the search term "abnormal

  When he puts an end to Firefox 3.6.6 firefox.exe continues to turn, visible in the Manager of tasks (XP) and stimulates the activity of the CPU up to 60% with the danger of overheating. Have not found an appropriate response with the search term "abnormal termination of the program."

  This has happened

  A few times a week

  is after update of Firefox 3.6.4

  I have the same problem with Firefox 3.6.6 except that it also consumes massive amounts of CPU during the race. This version also adds a new process on your system. I am running XP and in the beginning I tried to disable some plug-ins. Always consumed too much memory. I went back to version 3.6 and the new process went, and the CPU consumption is way down. Something is wrong with the latest version of Firefox, I never saw behave this way. Revert to a previous version (Filehippo) and you will see the difference.

• I come from components to build a new computer. Try to use the Windows XP Pro computer old version but after BIOS and XP installation I get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. "What should I do?

  New components is a new computer.
  Inserted the XP Pro CD in the drive but get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. »
  Rebooted comp 5 times with the same problem after BIOS.

  Hi Milkshake83,

  Thanks for posting. Proceed as follows for this error.

  Method 1: Restore the default settings of the BIOS WARNING: this procedure may involve changing the semiconductor (CMOS) settings of the computer's complementary metal oxide and by changing the BIOS of the computer. Incorrect changes to the BIOS of your computer can result in serious problems. Change the CMOS settings of the computer at your own risk.

  To resolve this issue, restore the BIOS of the computer to its default settings. For more information about the correct settings of the BIOS of the computer and how to check and change these settings, see the computer documentation or contact the manufacturer of the computer.

  In addition, to confirm that the computer's BIOS is current, contact the computer manufacturer to inquire about the last update of the BIOS available for the computer.

  Back to top

  Method 2: Remove the faulty RAM to resolve this issue, remove the memory modules installed in the computer.

  NOTE: you must leave enough RAM for the computer to start and run Windows.

  For more information on the amount of RAM that is required to run Windows, click on the number below to view the article in the Microsoft Knowledge Base:

  304297 configuration (http://support.microsoft.com/kb/304297/) System requirements for Microsoft Windows 2000 operating systems

  If the error message described in the "Symptoms" section of this article appears again after removing the memory module, remove a different memory module. This procedure may ask you to restart your computer several times to identify the specific memory module that is not working properly.

  For more information about how to add and remove RAM to the computer, contact the manufacturer of your computer or see the documentation that came with your computer.

  http://support.Microsoft.com/kb/318729

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error code: 800ccc0d, the server is not found, when I try to connect to servers using Windows Live Mail 2011 news

  Original title: 800ccc0d ERROR FIX

  Hi people, I am getting an error ("the server is not found") when trying to connect to my news server. Œuvres mail (hotmail) ok, but I can't connect to one of my two news servers I use (teranews and broadstripe). I've included the error code I have in the title above. I use Windows Live Mail 2011.

  Anyone has any ideas for patches?

  Hi kb3jlc,

  If this problem occurs only with Windows Live mail, you can post the question in the Windows Live community:

  http://windowslivehelp.com/product.aspx?ProductID=15

  Hope this information is useful.

• HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  The battery is dead. When I try to turn on the laptop by plugging the AC adapter does not charge or led power LED does not turn on. But when I press the power button, the power, the indicator flashes and turns off (when power adapter connected).

  (1) I tried the press and holding the power button for 30 seconds after removing the battery & AC adapter / CC.

  (2) I tried to change the power adapter too.

  The problem is that it is.

  Your advice is very much appreciated.

  Thank you best regards &,.

  Zia

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  It seems that you are not able to turn on the laptop and tried to solve the problem

  Please perform steps listed to find out if it is a hardware or software problem below:

  1. remove all cables and devices, disconnect them and try to turn on the device

  2. check the LED light situation and ensure the action of the spring button / stop is normal

  3 Exchange with a well known power cord and the AC adapter

  4 Pack no adapters are available, check if the power adaptor is slightly warm

  Note: This will give us an indication that the power adapter could be good

  5. do you know if the laptop was in battery or power adapter when you used the last time

  Note: Make sure that there is no spill of liquid or cutting

  6. check if the Port of the AC adaptor is loose/broken

  Note: If the laptop is not on even with a power adapter well known, this confirms the hardware failure with the system board or power DC Circuit

  Hope this helps for other queries to answer the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• Hello! I get the message "File not found" when I try to access my photos

  Hello! I get the message "File not found" when I try to access my photos in lightroom, and I can't find my photos! I had cleaned up my Mac and deleted by mistake in a different location and now only a gray peak appears in LR, along cable message, file not found. I had saved the raw disk backup files, but it won't let me import into lightroom. (Alright will appear in the import box, but it won't let me even click on it to add. Help!

  In the grid, right-click on an image of 'missing', select 'go to the folder in the library.

  If the folder view does not resemble what you show Finder, right-click on a folder and select 'Show the parent' '; repeat if necessary.

  This will show you where LR thinks that the file was originally.

  You can try to put the images where they were, or place them go elsewhere and 'move' the file in LR.