Computer HP won't sleep when wrt54g connected

Similar Questions

• I have problems connecting to the House. Online (IE), after that my computer goes into mode 'sleep', when I wake it back my connection is lost.

  After awakening, when I still work online I get box to "Diagnose connection problems", click on it and I get three options.

  1. ' autmatcally get a new IP address for the network card. Connection to the local network

  2. a problem with your modem router or broadband network (suggest I unplug everything and then back on after 10 sec.) I did it.

  3 reset the network connection local network adapter. I did this and log back, it does not solve the problem.

  Hi Twindaddio,

  A. are you using a cable or a wireless connection?

  B. when it last work very well?

  C. What is the exact error message?

  Try this step in the meantime.

  1. click on Start.

  2 type devmgmt.msc in the start search box and press on enter.

  3. click right network adapter and click Properties.

  4 Select the power management tab, and uncheck the option to save energy.

  I hope this helps.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• HP 2311 x monitor won't sleep

  I have my system my computer Setup will put my monitor to sleep after 10 minutes if the computer is idle.  The problem is that my monitor will not fall asleep.  It shows the system status menu, scan for input device, said so he'll sleep, power light goes Orange and a few seconds later he wakes. Then start the whole process again and again.  If I put the system to sleep monitor goes to sleep (didn't at first when I got until I updated the driver of HP).  I connected it to the DVI plug.

  It seems that I found my own solution and I'm posting so it can help others.  Although my computer is about 3 1/5 years it has a DVI and VGA connections for the monitor.  The HP2311x monitor has DVI, VGA and HDMI connections.  I got the screen hooked up using the DVI connection.

  I changed and hooked it up to the VGA connection.  Set the computer up so the monitor going to sleep in a minute and waited.  Monitor went to sleep and not wake up until I moved the mouse.  Tested several times more and no problem.  So apparently there's something with connections DVI monitor won't sleep when you use this connection.

• XPS 8500 won't sleep automatically

  Computer will not fall asleep by himself. Windows 8 Professional 64 Bit is the operating system.  Parameters of sleep = sleep after 10 minutes.   Suspension selective USB = on.    Drive hard sleep = 9 Minutes.    Wake timers are disabled.   We suspended suspect Applications and the computer still won't sleep.    If you have any suggestions it would be appreciated.

  Hi supersystem1121,

  Please try the mentioned below as follows:

  1. Click the Start button, select Control Panel, click System and security, and then click Power Options.
  2. On the select a power plan page, click on change settings for the plan for the plan you want to change.
  3. The parameters of change for the plan of the page, click on change advanced power settings.
  4. On the Advanced Settings tab, expand sleep, expand allow hybrid sleep and select IT.
  5. Under the Advanced Settings tab, expand sleep, Allow wake timers, select activate.
  6. Under the Advanced Settings tab, expand USB settings, under USB settings USB selective suspend settings, select Enable.
  7. Select apply then OK to save the changes.

  Check if the above steps work and that it respond.

• computer not automatically standby (formerly titled "impossible computer automatically sleep when it is connected to the internet with modem cable")

  Hi, I noticed recently that my computer (Windows XP Media Center Edition 2005) is unable to sleep automatically when it is connected to the internet with a cable modem. Change the settings for my current power mode and try a different feeding regime (diagrams of Windows XP default power and power management, I created) only solves the problem for 2 days at most. I also tried to change the settings for the other power plans mentioned, and yet once again, the problem was only set for two days at the most. I also tried turning off my computer, restarting my computer, recording Powercfg /Restore Default policies in Run, saving sfc/scannow in Run, and again, I got the same result. Reset and power cycling the modem cable is not helped either. To help you better understand the problem, for example, if I had the date set for the screensaver set to 1 minute, the time for the monitor to turn off set to 2 minutes and time for your computer set to 3 minutes, the screen saver activate after 1 minute, the monitor turns off after 2 minutes, but the computer would not sleep mode after 3 minutes , even after an hour or more. I tried to check the Task Manager, and I have not noticed any process that would be interrupting the day before. However, I noticed that when I turned on the monitor by moving the mouse, even when the computer was unable to sleep and unplugged the ethernet cable from the cable modem and waited, the computer has entered standby as it should have.  I tried to find a solution for more than a week, contributions for this issue would be greatly appreciated. Thank you for taking the time to read my post. (Update: it seems that the problem is something else then my cable modem.)

  Hello

  Thank you for the update.

  This behavior can occur because of possible conflicts of third-party software, which includes the third-party security software.

  You can also temporarily disable third-party security software and firewalls installed on the system and check the issue.

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: be sure to enable the security software on the computer after checking the issue.

  Note: When you perform a clean boot, you can activate services for the modem, network card and disable third-party services to check the issue.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• The internet connection is lost when the computer puts itself to sleep after that idlen too long time needs to restart to re-establish the connection.

  I lose the internet connection

  Window vista Home premium intel core 2 quad CPU q6600 @ 2.40 ghz, 3.00 GB ram the System 32-bit

  The internet connection is lost when the computer puts itself to sleep after that idlen too long time needs to restart to re-establish the connection

  Hello

  Control Panel - device - network - manager double-click the used network - power management device
  Tab - uncheck the computer to allow him to turn off the device.

  Control Panel - Power Options - check at each change of diet Plan - change Plan settings - advanced
  Power settings - check the settings there.

  You may reset the default power Plans and and then change them as needed.

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• my computer would not wake from sleep when the cover iclose & open again?

  When I close the lid on my computer & open it again, the computer does not wake up, it shows just a black screen!

  Hi George,.

  From the description of the problem, it seems that the computer would not wake from sleep when you close the lid and open it again. I understand the inconvenience.

  Let us, try to perform the following methods and check if it helps.

  Method 1: Run the troubleshooter of power

  Open the troubleshooter of power

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  For more information, connect to:

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  Method 2: Troubleshoot wake the computer from sleep mode

  http://support.Microsoft.com/kb/266283

  Method 3: Update Chipset drivers

  Download and install the latest version of drivers for chipset for the computer on the computer manufacturer site and check if you are faced with the same question.

  Method 4: Run the BIOS update

  I would say as you perform the update of the BIOS by contacting the manufacturer of the computer, check if it helps.

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you

• I have a desktop computer and a laptop. When I change a bookmark on one, it does not change on the other, even if I am connected to sync

  I have a desktop computer and a laptop.
  When I change a bookmark on one, it does not change the other even though I am connected to the sync.

  Sync is meant to do?

  Most probably one of the two computers has corrupted data which does not allow the sync complete.

  Refresh (called "Reset" in older versions of Firefox) can solve a lot of problems in restaurant Firefox as his default factory while saving your bookmarks, history, passwords, cookies, and other essential information.

  Note: When you use this feature, you will lose all the extensions, toolbar customizations, and certain preferences. See article Firefox Refresh - reset modules and parameters for more information.

  Refresh for Firefox:

  1. Open the troubleshooting information page using one of the following methods:
     • Click the menu button

       

       click Help

       

       and select troubleshooting information. Should open a new tab containing your troubleshooting information.

     • If you are unable to access the Help menu, type Subject: support in your address bar to bring up the troubleshooting information page.
  2. At the top right of the page, you should see a button that says 'Refresh Firefox' ('reset Firefox' in older versions of Firefox). Click on it.
  3. Firefox closes. Once the update process is complete, Firefox will display a window with the imported information.
  4. Click Finish and reopen Firefox.

  This corrects the problem? Please report to us!

  Thank you.

• When I connect to another computer, office, I can't access my favorites. Only available bookmarks are the other owners of computers.

  If Mozilla is server-based, why are my bookmarks/favorites not available when I connect to my account? Thanks for any help!

  This must be provided. Firefox is not based on server it is installed on your device.

  It is possible to synchronize the devices using Firefox Sync, but it is not appropriate if you use someone elses computer.

  You might consider taking a copy of your bookmarks with you or placing them available somewhere on the web (or on a medium such as a memory stick).

  • Use bookmarks HTML
    • Export your bookmarks as HTML. Open this file with Firefox. Try it first on your local computer.
    • See Export Firefox bookmarks to an HTML file for backup or transfer bookmarks
    • Noticing no need to import the file it will be readable in Firefox. It is not not searchable from the address bar or bookmarks manager, but it should be a useful list of usable and searchable.
  • Use a Firefox profile on the other computer.
    If you have Firefox installed and the permission of the owner of the other computer (it can be your own additional machine), you will be able to synchronize or migrate the profile details, including bookmarks. Or just restore a set of bookmarks from the other machine.
    • See How can I set up Sync on my computer?
      Profiles - where Firefox stores your bookmarks, passwords and other user data
      Backup and restore Firefox profiles information
      Restore bookmarks from a backup or move them to another computer

• Computer to sleep when it should not.

  I used the following command:

  sleep of sudo pmset - a displaysleep 15 disksleep 0 0

  The intention was to make sure my computer would never sleep and would be able to continue long downloads like my dropbox synchronization.

  Always when I go home, the computer is asleep and interrupted downloads.

  How can I diagnose this? Is there a tool to monitor what the computer is doing and why when I'm missing?

  Thank you!

  Why not go to system preferences/Energy Saver and define sleep ever?

• My iPAD asks me to update to OS 9.3, but the update fails because it says that the iPAD is not connected to the internet and when I connect to my computer iTunes it say my OS is up to date.  Help, please.

  My iPAD asks me to update to OS 9.3, but the update fails because it says that the iPAD is not connected to the internet and when I connect to my computer iTunes it say my OS is up to date.  Help, please.

  I'm surprised to hear that for an iPad 2 that the issue had apparently been set for 2 s. Please see this for more details as I know them. Maybe the servers at your site have not been updated yet for the new version of the iPad 2.  ???

  Apple released the update iOS 9.3 for older devices (air of iPad and previous iPhone, 5 s and previous) due to problems with Activation. See the following for details and possible solutions.

  http://www.IMore.com/Apple-working-iOS-93-fix-older-iPhone-iPad

  https://support.Apple.com/en-us/HT206203

  A new version for the iPad 2 is now available which does not require the activation step. A new version for other devices is not yet available.

• When I connect my Ipad or Iphone to my computer via a USB cable, I can open the storage folder without using a password. How can I avoid someone else do the same?

  When I connect my Ipad or Iphone to my computer via a USB cable, I can open the storage folder without using a password. How can I avoid someone else do the same?

  This storage folder are you referring? If you are referring to the film, what happens because you have accepted a trust between the iOS device and the computer. If the device has been connected to another computer, it must be unlocked and establish a relationship of trust as well. If you are referring to something different, please explain.

• I use a Toshiba Windows 10 computer to manage my Itunes account.  I have an Iphone with IOS 9.2 6.  When I connect to Itunes and connect my phone to the computer, it does not appear in the list of devices.  Help?

  I have a 6 Iphone with IOS 9.2 and when I connect it to my computer Toshiba P75-A7200 with Windows 10 - and I connect to my Itunes account, my Iphone does not present as a listed device.

  Can someone help me?

  http://lmgtfy.com/?q=iPhone+not+recognized

• How can I configure my computer to sleep when left inactive Aero

  My computer has just been repaired and it the technician has not set a time for the computer to sleep when idle for several minutes

  Hi Phill,

  What version of Windows is installed on the computer?

  You can check these items to create a power plan or choose one.

  If you have Windows Vista.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-create-or-delete-a-power-plan-scheme

  http://Windows.Microsoft.com/en-us/Windows-Vista/power-plans-frequently-asked-questions

  If you have Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme

  http://Windows.Microsoft.com/en-us/Windows7/power-plans-frequently-asked-questions

  I hope this helps.

• Error 'nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll is not found"when you connect to the computer.

  Original title:

  Problem: I use DeLL Desktop.When I connect, these messages appear on my screen: nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll not found. Re-installing the application may fix the problem. Pls help. Thank you.

  Hello
  1. what version of Windows is installed on the computer?
  2. are you aware of any changes made to the computer, before the show?
  Assuming you have Windows Vista or Windows 7, follow the steps mentioned below.

  Method 1:
  

  Step 1: Perform a boot minimum troubleshooting and check which application reports this error
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Step 2: reinstall the application.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 2:
  Run an analysis of auditor of system files on your computer and check for the issue.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  I hope this helps.