Computer is not in sleep mode or Hibernate mode

Similar Questions

• Satellite A300-1HP is not in sleep mode after 30 minutes inactivity

  Satellite A300 1HP is not in sleep mode after 30 minutes inactivity.
  Windows settings are OK (I'm an experienced user).
  He goes to sleep, if I do it manually (by pressing the power button) - but not after inactivity,

  Any idea?

  Norbert.

  Hello, Norbert

  Maybe you should check the settings of Vista power again. I have too many A300 and everything works fine.
  I tested it with all three power plans. Have you done the same?

  Usually, I use the BALANCED power plan and enter mode standby 20 minutes correctly.

• Computer will not stay in mode 'sleep'

  Computer won't stay in mode 'sleep' when I put on standby manually. I have Windows 7 Home Premium. Sometimes, he won't sleep as set of power management.  Thank you!

  Hello

  Maybe this will help:

  Windows 7 is not going to sleep<-- check="" this="" link="" which="" might="" offer="" some="">
  http://support.Microsoft.com/kb/976877

  ----------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------

  More that might help.

  References to Vista also apply to Windows 7.

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on
  Modem and so on.

  Windows 7 problem with sleep and Hibernate Options - see the troubleshooting section
  http://www.computerperformance.co.UK/Windows7/windows7_sleep_problem.htm

  Troubleshooting Windows Vista sleep and Hibernate (also Windows 7)
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  (also Windows 7)
  http://support.Microsoft.com/kb/950686

  Sleep and extended: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Standby Mode Vista and a solution (also Windows 7)
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to disable and re-enable hibernation on a computer that is running Windows http://support.microsoft.com/kb/920730

  How to restore the default settings of the power Plan in Windows 7
  http://www.SevenForums.com/tutorials/950-power-plan-restore-default-settings.html

  
  How to change the power Plan settings in Windows 7
  http://www.SevenForums.com/tutorials/778-power-plan-settings-change.html

  How do I change the sleep settings in Windows 7
  http://www.brighthub.com/computing/Windows-platform/articles/60294.aspx

  
  How do I change the sleep settings in Windows 7 (including hybrid sleep)
  
  http://www.brighthub.com/computing/Windows-platform/articles/60294.aspx

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• mouse and keyboard do not work once the computer wakes up from sleep mode

  running Win7 64 bit

  Processor Intel core 2duo
  x 2 corsair 2 GB RAM
  ATi Raedon 4800 series gfx
  all the drivers are up to date.
  no idea why they don't work after the release of the mode not sleep? It is very frustrating as I have either stop whenever I'm done with the computer, or reset when it comes out of sleep mode.

  Oops, ok, so I disappeared for a bit there.

  Yes, I tried that as well.
  OK, so, this weekend, I flashed my bios. and that seems to have solved the problem (woohoo)
  for anyone else reading this, if you are not very savvy with computers, I would say DO NOT Flash your BIOS, but find someone who knows a little about computers to do it. If you do not Flash your BIOS correctly, it can damage your motherboard

• iMac does not enter sleep mode

  Hello

  My iMac will all of a sudden not more "standby". He worked for a long time without problem.

  MAC OS: OS X El Capitan version 10.11.5.

  MAC: iMac mid-2010 27 "

  FileVault is turned on.

  What I tried:

  1. Fix disk problems (first aid function)
  2. Discount to zero NVPRAM
  3. Reset the SMC
  4. The repaired disk permissions
  5. Restarted several times
  6. All updates are installed
  7. Update firmware (interface EFI)

  Hypernation is set to the standard. Value = 0 (not changed)

  Yes, it worked well with active FileVault. If this isn't the problem.

  The computer will not be simple go to sleep or self according to setting Energy or actively by selecting mode 'sleep'.

  In the console of the system log, I constantly see these errors when the iMac try to go to sleep:

  06/18/2016 19.15.21,941 WindowServer [311]: device_generate_desktop_screenshot: authw 0x7f8ecc869c00 (2000), shield 0x7f8ecc0ab000 (2001)

  06/18/2016 19.15.21,941 WindowServer [311]: device_generate_lock_screen_screenshot: authw 0x7f8ecc869c00 (2000) [0, 0, 0, 0] shield 0x7f8ecc0ab000 (2001), dev [2560,1440]

  06/18/2016 19.15.22,068 WindowServer [311]: no sleep for WillPowerOffWithImages image

  Especially the last of them worry. And there is no/private/var/vm files if it must be that.

  Is there a simple and understandable way to solve this problem. Don't just suggest to just turn everything off as he worked and I did not change any settings.

  I have the console of the system there is also a lot of errors/warning on Itunes if it could be linked to the issue:

  18/06/2016 19.15.39,437 iTunes [738]: entry: _AMMuxedDeviceDisconnected, mux-device: 76

  18/06/2016 19.15.39,437 iTunes [738]: entry: _AMMuxedDeviceDisconnected, mux-device: 71

  18/06/2016 19.15.39,449 iTunes [738]: entry: __thr_AMMuxedDeviceDisconnected, mux-device: 76

  18/06/2016 19.15.39,450 iTunes [738]: tid:45cbb - Mux ID not found in the mapping Dictionary

  18/06/2016 19.15.39,450 iTunes [738]: tid:45cbb - handle cannot disconnect with invalid ecid

  18/06/2016 19.15.39,450 iTunes [738]: entry: __thr_AMMuxedDeviceDisconnected, mux-device: 71

  18/06/2016 19.15.39,450 iTunes [738]: tid:45cbb - Mux ID not found in the mapping Dictionary

  18/06/2016 19.15.39,450 iTunes [738]: tid:45cbb - handle cannot disconnect with invalid ecid

  18/06/2016 19.15.39,454 com.apple.xpc.launchd [1]: (com.apple.dpd [5986]) Service came out with abnormal code: 75

  18/06/2016 19.15.39,000 kernel [0]: PM response has taken 100 ms (81, coreduetd)

  This found ID of MUX is here for a long time.

  Please launch the built-in activity monitor application and select the Select power tab

  Discover ▹ all processes

  in the menu bar, if it is not already selected. Also select

  View columns ▹ ▹ prevention of sleep (or assertion of power)

  Click on the header of the column preventing sleep to sort the table of process. A process which, if any, show Yes in this column?

• Satellite P30 Pro: Will not properly sleep mode

  Hello

  I do not normally use the standby feature, but it hibernates.
  Recently, I started using it, so I keep the supply charge of the power supply of the wireless mouse.
  Unfortunately, he's not exactly going in standby mode it used to - I close the lid and I can hear the fan turns off after a few seconds (about 20) standby red LED flashes and then they come back after 5/10 seconds and stays on.

  The standby light goes green on and in practice, it is, switches the screen off the power and the ADSL connection - that's all.
  I did close the cover of the last night and found this morning with 3 green LEDs on the fans running!

  Any help?
  Please note that the settings are correct - I just checked and it is set to go into sleep mode by closing the lid.

  Thank you
  Mobo

  PS: Lately, I have day a few drivers from the Web from Toshiba site (can't remember which)

  Hello

  If I understand you right, the laptop is on standby and it s is always connected to the local network.

  Well, maybe there is a wake-up on LAN enabled mode who wakes the machine automatically to standby mode.

  Try to access the BIOS and LAN / WLan, settings on the card and if necessary to disable this option.

• Color HP Laserjet Pro 200 M251n does not in Sleep Mode

  Printer: HP color Laserjet Pro 200 M251n

  Firmware: 2014-06-04, Version 20140521

  Problem:

  Since the last update Firmware the printer does not sleep/wake no event (all configured to wake up the printer) will wake up the printer. Even to connect via Webinterfac the printer does not respond. Ping also fails.

  Tried to connect the printer to the printer ports / wall plug changed network cables nothing worked.

  The only solution is to reset the printer (power off / on) to get the printer working again.

  Played a bit with the EcoSmart configuration, but little matter what is selected it its always the same as the printer stuck sleep/sleep mode and don't responde.

  Y at - it somewhere the old FIrmware to download to try a downgrade if it would help?

  I really don't think there is anythink else I could try.

  just to confirm that the last Firmware update solves the problem

  If I remember correctly it when, one day in December when it came out

• Computer constantly wakes from Sleep Mode

  I have a new PC HP Pavilion Elite M9450f waking up constantly from Sleep Mode, even if no one is at the computer or even in the bathroom.

  Sometimes it will stay mode standby for a few seconds and other times, it can stay in this mode for 10-15 minutes, but he still wakes up mode standby by itself.

  I would appreciate any advice you can give me for this problem.

  More than likely, this is your internet connection, it to wake up.  I hope that someone will jump in and explain better than me how to turn off the wake of the lan setting.

• Screensaver freezes and does not wake sleep mode computer using the mouse or keyboard

  Screensaver stops

  Hello

  My screen saver stops working after 2 or 3 minutes and sometimes the computer crashes? Running Vista Home Premium.

  I also 'wake up' the computer from sleep - move the mouse or the keyboard overlay help no problem. What is the right way?
  Nonsense without doubt butannoying me!
  Kind regards.

  SID

  You probably receive faster responses in the forum Vista, Perfromance and maintenance: Repost, please.
  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/threads

  t-4-2

• Computer do not normally sleep wake up and the computer hang when external USB devices are connected

  Hello

  I have a Windows 7 Home Premium 64-bit desktop CyberPowerPC, and there are currently two problems with it:

  1.), I have two USB ports in the front of my case. I am connected to my computer. Then I tried to connect my external hard drive using the USB cable supplied with it, but just at the moment where the end of the USB cable touched the port, the screen is black and automatically rebooted and froze when the display shows the brand CPU that is before the login screen. I actually press the restart on my case button to restart the computer with the hard drive already plugged. Then everything should work normally.

  It's the same thing when I tried to connect my iTouch 2nd generation.

  This problem occurs sometimes, however, but I wonder if someone always has a solution to this?

  2.) whenever I put the computer to sleep and he remains asleep for a while and I turn it on it once again, powers for about 2 seconds then it turns off. I have to turn the power supply and light in the order so he could get out of mode 'sleep'.

  I was wondering if you have solutions to this problem, as well.

  Thank you.

  Original title: new Windows 7 problem

  Ok.. I'll try again...

  The problem is caused by a bad 'ground' between the USB ports of the case and the motherboard. Static electricity is originally the USB device to short on the USB port which is originally the motherboard restart mode.

  I had the same problem and got my computer case exchanged. The problem has not entirely disappeared, and I use the USB port on the front on the card reader, just in case.

  It can also be a problem with the power supply or even the motherboard. It is very difficult to locate the failure without replacing in turn, a process that happens to be a bit expensive.

  The above is the reason why I recommend that you contact the MANUFACTURER. Don't take no for an answer off the manufacturer or supplier. It is a problem annoying which can eventually damage your operating system if it is enough...

• Apple TV Airplay of 4 works is not in Sleep Mode

  Hi all

  I have a problem with my new ATV4 and the use of airtime. If I turn on the ATV with the included remote control, I have no problem using airtime and everything works as it should. However, if I put my ATV in standby mode after a few minutes the Airplay icon will disappear and I am not able to start it by sending the contents of airtime to it (btw the remote for iOS devices app is also not able to connect in standby mode and run it). Now, I've already owned an ATV2 and with this device I've ever had any of the problems noted above. I tried many things such as giving the ATV a fixed IP address, deactivation and reactivation Airplay, restart and finally completely restore the device. After that nothing helps I contacted Apple for support and after several calls which included to restore the device again once they are now trying to tell me that my problem is
  not a problem at all, but it is intentioned behavior of the device. Please can someone of you confirm that you are able to connect to your ATV4 also during the night before and wake up, it? With this information, I would then contact support again.

  I already thank you in advance and best regards

  Oliver

  Yes, I am able to launch an event Apple AirPlay TV 4 sleeping. In my particular case, I have a mixed network (ethernet and wifi) between the two devices.

• Satellite L40 don't stop with power connected and is not in sleep mode

  Hello world. I hope someone can help me. Basically, there are two problems: one with judgment of the laptop (Satellite L40 - 17U (Vista 32 bit Home Premium SP1)) down when power is connected and the other with closing the lid and put it to sleep.

  1. in recent weeks, it all of a sudden won't stop, whenever power is connected. When it's on battery, it will stop. When the power is connected, and I try to stop, it seems that it closed down (all activity stops and the led goes off) for about 1 or 2 seconds, then it goes back.

  2. when I close the lid (all settings in Vista are set to put the laptop in a State of 'sleep' when the lid is closed), the laptop enters a State where it cannot be recovered by stopping by pressing the power button for 10 seconds to close completely. When closing the cover, only the battery LED continues to Flash orange (the way it should be), but apparently the laptop keeps consuming power, because when I restart later (first having to close as described above) tends to be quite an empty battery as it was before the next redΘmarrage it (like go from 100% to 65% in 30 minutes as "standby mode"). Also, when I open the cover, the other LEDS will on new (green), but nothing happens.
  After the restart first by pressing the power button for 10 seconds to close, I often get the message that Windows cannot be started and run the system repair.

  I just do a completely clean install with the product recovery CD (has not installed SP1 yet), updated to v1.90 BIOS, but the problem remains.

  I'm afraid that my only option will be to bring him away for a warranty repair, but knowing that these repairs can take weeks, I'd rather try a solution here could someone recommend me first. If you have any ideas, please let me know.

  Thank you
  Daniel Breslauer

  Hi guys

  Never had this problem on my laptop, but with regard to an other users here in the forum the BIOS might help solve such strange behavior for laptop
  To be honest the closed question is unclear for me I noticed a problem before on my laptop but the update of the BIOS helped.

  This is why I recommend update BIOS first.
  If the problem still appears, the ASP should take a look in the notebook.

  Good luck

• HP Office Jet 8620: Do not print sleep mode

  If I have not used my printer for a while, it goes into mode "Eve".  When working on the computer and try to print something, I always get the message offline printer.  I usually have to restart the printer and then the page will print.  It is a common problem or is there a solution for this.  According to HP and win 10, I have the latest drivers and software available.

  Anyone else having these issues?

  Gary

  Printer is connected to the wall jack of th wireless to the computer, and the trickiness is approximately 1 foot away from the printer.

  Gary

• computer may be in sleep mode and run exxentials scan security

  See above

  Lol when your computer is in any mode power saving without programs are running or can be executed.

• Satellite Pro M30: Computer does not enter standby mode

  Hi all

  I have a Satellite Pro M30...

  When my computer is in stand-by or is closed, the first keeps flashing orange led and it refuses to start. It reboots only when I unplug the connection and remove and replace the battery several times...

  Anyone knows what is the cause of this and what is the long-term solution?

  Longesson...

  Hello

  As far as I know the light glow orange or flashes while the battery is charging. If it of impossible to turn on the device while the battery is charging so in my opinion, there is something wrong with the electronic power to your laptop.
  You should contact the service partner for help.

  Good bye