Laptop screen turns off during an update of the windows system

Similar Questions

• Computer DV7-1825dx laptop screen turns off at least connected to the HDMI

  I have a Pavilion dv7-1825dx running Windows Vista Home Premium 64-bit.  The other day, I simply closed the laptop into hibernation.  At the time, it was only connected to a printer and a wireless mouse.  The next day, I opened the laptop and it turned on but the screen stays off.  I shut down the computer by holding the power button and then turned back on.  The screen appeared and asked me if I wanted to start Windows normally.  Then, I got the loading screen for Windows.  As soon as he was done loading, the screen turns off and the chime sounded for the login screen.  I repeated again than having the same problem.  I typed my password, but the screen stays off.  Because I often hang my computer to our TV via HDMI, I thought I would try it, and that is, both screens lit.  I then disconnected the HDMI cable and the computer screen exploded again.  Plugged into the HDMI and activated.  I went into options for NVIDIA and noticed that there is an analog display with the screen of television and laptop (up to three screens on the list).  I restarted in safe mode, and the screen of the laptop works great.

  Any ideas on how to solve this problem?  That I can not connect my laptop to the TV whenever I want to use.

  Thank you advance!

  http://www.nvidia.com/object/notebook-Win7-WinVista-64bit-285.62-WHQL-driver.html

  Save the driver on the desktop and install it from there, not in a temporary folder.

  Create a Windows restore point before starting.

  During the installation of the new driver, click on "Custom" and there will be a link to uninstall the old drivers and all of your current settings, this before you install the new driver.

• Laptop screen turns off during a rotation to 90 degrees. OK, less than 90.

  The laptop screen will be empty to a blank screen when the screen is rotated about 90 degrres or more. (a ususal viewing angle)  If the sc reen turned 30 degrees, the laptop works very well and the screen is fine. Unfortuantely I can't work with the screen almost completely closed.  Microcenter computer says it is the logic board but the problem seems so mechanical in nature.  MAchine works fine otherwise. Logic board of expensive repair for a 4 year old laptop. Any suggestions or ideas.

  Replacement of the resolved display cable problem

• My computer turns off during an update to windows xp and now windows xp will not load.

  My computer turns off during an update to windows xp and now windows xp will not load.  It gives me the option of last known good configuration and safe mode startup and normal startup, but it just goes back to the loading screen then flashes a blue error screen then back to display boot options.  I don't have a recovery disc as the laptop does not have a CD-ROM drive or a floppy drive.  I have the product key, but I don't know where or how repair the operating system.

  Contact the manufacturer of your laptop as there must be a way to restore the computer. There may be a hidden restore partition.

• the phone screen turns off during a call... No control over the phone

  My Defy screen turns off during the reception or to make a call... Impossible to control the phone... need to take out the battery to turn off the call... Help! PS this could be a software issue or user?

  Do you have a case on your phone? It seems that the proximity sensor is processing the phone as if it were close to your face. A case or a screen protector can cause problems if it includes the proximity sensor - near the earpiece.

• Two problems that seem to be related. The screen turns off suddenly and reappears when the mouse is clicked. At the same time, the cursor insertion point disappears.

  The cursor disappears during the strike. It is blackened and cursor disappeared three times during the typing of this sentence. Very frustrating! I'm running Windows 7 Pro on a Dell Inspiron.

  Hi Ed,

  Thanks for posting your question in the Microsoft community.

  I understand that you have 2 problems on your Windows 7 computer.

  1. The screen turns off when you click with the mouse.
  2. The cursor on the screen disappears while typing.

  Let me know if this interpretation is erroneous. To better understand the issue, let me ask a few questions.

  1. What is the brand and model of the computer?
  2. You did changes to the computer before the show?

  I am here to help you and I suggest these methods to solve the problem.

  Method 1:

  Start the computer in safe mode and check if the same problems occur. Safe mode allows only a minimum set of services to load, this will help us to know if a service is causing the problem.

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Method 2:

  If the problem does not occur in safe mode, and then perform a clean boot, this will turn off non-Microsoft services and therefore to determine if any non-Microsoft service is causing a conflict for the problem to occur.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once the diagnosis is made, follow the steps in the article to configure the computer to start the Normal start.

  Method 3:

  The question could have occurred because the drivers on your computers are not updated. See the link, follow the steps and update the drivers.

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  You can also check this link for more information.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  View the status of the issue. If the problem persists then let know us, we will provide several methods.

• Laptop screen turns off but the system never sleeps when closed.

  Hello!

  I have a laptop Alienware M14x and quite frequently when I close my laptop, the screen turns off but the system will not. When I reopen it, the screen stays off and the system seems still to go but no matter what I press on, the screen does not turn. To fix it, I just turn it off power then back on the power button. I know that my laptop is still running because the fans are still running and the lights on the front and on the keyboard are lit. I don't know if this is a problem common or not, but it's really annoying.

  Any help would be greatly appreciated! If there are other details that might help, do not hesitate to ask!

  Thank you!

  -S.

  Firstly I find a windows command can tell you if you have something that prevents the mode 'sleep'. Run as administrator command window and use the command: powercfg-query.

  If you have my problem and SRVNET is active, you will see this:

  SYSTEM:
  [DRIVER] \FileSystem\srvnet
  An active remote client recently sent requests for this machine.

  2. to add SRVNET to the exempt list, do the following at the command prompt (EXACTLY as shown below.)  DRIVER MUST be written in capital letters):

  powercfg - requestsoverride DRIVER '\FileSystem\srvnet' system Awaymode

  and for good measure (not sure if necessary but I did anyway)...
  
  powercfg - requestsoverride DRIVER "srvnet' system Awaymode

  3. once all is said and done, it should look like this after you run:

  powercfg - requestsoverride

  [DRIVER]
  \FileSystem\srvnet SYSTEM AWAYMODE
  srvnet SYSTEM AWAYMODE

  4 enjoy again the "sleep mode".

  Credit is to JohnnyN to http://yabb.jriver.com/interact/index.php?topic=79201.0

   

• Computer laptop screen turns off (it returns when the mouse is moved) when the settings say should not

  My laptop screen goes black after a minute, even if I put power to never the brightness options and it stop after ten minutes

  Hello

  Try to run the electrical troubleshooting utility and check.

  Troubleshooting of power allows to solve any problem with the computer's power settings.

  a. press the w key and Windows and type troubleshooting.

  b. press ENTER.

  c. click Show on the left panel.

  d. click Power.

  e. click Next and follow the on-screen instructions to solve the problem using the troubleshooting of power utility.

  Also, try to create a new power plan and check if it makes a difference.

  Go through http://windows.microsoft.com/en-in/windows-8/power-plans-faq

  Hope this information is useful. If you have any questions, please let us know.

• How to set the amount of time before the screen turns off during the slow activity

  Adjust the idle time before the screen saver stops

  Right click on the desktop | Customize | Screen saver | Change the power settings.
   

• Screen turns off during a video session on Sony Bravia TV.

  I have a Windows 7 Home Premium machine. It has Intel DG45ID motherboard with integrated graphics and sound. In use network interface card is Asus PCE - N15-wireless. As a monitor for this system, I use Sony Bravia TV. Its normal resolution is 1920 x 1080. TV is connected with HDMI cable, sound comes from separate computer speakers. This installation of Windows is more than a year now and until very recently it has worked flawlessly. However the screen started having weird outages. System works normally for a while and then all of a sudden comes totally black screen for a second, and after that this system works well again. It seems that this is not a major problem, but in any case, it's annoying to have a black screen during a video session.

  I tried following:
  I uninstalled and reinstalled Adobe Flash Player. It did not help.
  I have updated the drivers for graphics cards. It did not help.
  Original title: blinking display

  I uninstalled my previous antivirus software and replaced it with Microsoft Security Essentials. It did not help

  I do not know what causes this behavior, but I have the feeling that there might be software that is changing display resolution to something that TV does not support.

  Issues related to the:
  Is my correct diagnosis?
  What is the software that is the cause?
  How it can be fixed?
  If you know the solution to this answer please problem. Thanks in advance.

  So, I unplugged the power cable and all other cables and open the folder. Everything seemed to be in good condition. However, it is computer shelf with micro ATX form and therefore, there is not too much space in the case. HDD and DVD drive are in separate removable metal frame and SATA cables are a little tight. Also drives hard cable has been connected motherboards SATA1 connector, and the DVD player was connected to the SATA0 connector. And end drives seemed to be a little loose. I happened to have a spare cable SATA and cable change new hard drives. I also changed the ends of motherboard, hard drive on connector 0 and DVD 1-connector. Then put evrything together and started the machine. First visited the BIOS configuration settings and reset the defaults. And now, the computer works well again! I don't know what really made the tour. Disks hard SATA-cable was perhaps wrong.

  Thank you for your consideration. Good bye. Pekka.

• Screen turns off during the passage of programs (version 38)

  Second time thanks to this... It started yesterday. When I tab (switch) between programs on my desktop, the thunderbird display shuts off. Sometimes, he returned in a few seconds. Otherwise, if I click on the Calendar tab and then return to the e-mail tab, it clears... until I have turn back. This does NOT happen with other open program windows. There is no upgrade for all programs that I know. Very annoying.

  I reinstalled 31.7.0 and the problem disappeared. Had tried the betas v.38 and they did the same thing. Very strange and I was about to go to another client, because it was so boring. Party at the moment. Whatever it is, it has to do with v.38.

• my laptop keeps turn off after my free trail of windows 7? How can I fix it__

  I installed the free trial version of windows 7 to see if I wanted, I decieded to stay with vista at the moment but my laptop that keeps sutting off after 1 hour of use, I can not stop it how can I recover my vista and keep my old information on it?

  I had more time then 90 days

  He said that my time of assessment ended

  I installed in front of him before this happpened

  How to uninstall Windows 7:
  http://support.Microsoft.com/kb/971762 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Satellite 1800 - 752S - the screen turns off

  Hello world.
  I have a satellite 1800 - 752S.
  Since an ew months ithas a weird problem: the screen turns off. If I press and release the button the lid on what it is, but after that turns off again quickly. OT goes off sometimes immediately, sometimes after a few minutes, or even hours. Sometimes it provides be when I run out of battery and bothers me on AC, sometimes against. It works fine, after I turn sleep or hibernation several times, and after a reboot, it bothers me. I've updated his BIOS for the lates on this site, which would not help. I guess it's a hardware problem, because it's the same problem under Linux, and I tried to install different versions of drivers and windows (not only the one of the recovery CD). Anyone have the same problem before. Any help will be appreciated.
  Thank you very much
  Roman

  Hello

  I think you're right, it's a hardware problem. But to be sure, try connecting an external monitor. If it works without problem while laptops, screen turns off, then it must be a hardware failure.

  I guess it's a problem with the FL inverter. You have to give your machine a service partner Toshiba for repair.

  Good bye

• Satellite A200 - screen turns off without reason

  I have a Satellite A200-E530D on Windows Vista Home Premium. For a month, I had something strange happening on my computer, shortly after the start, the screen turns off. without good reason! the only option I have is hard to system boot and everythings... Although a few times after the restart he still went.

  I tried to upgrade to the last poster of drivers (I have an Nvidia Geforce Graphics card 7300 Go with 128 MB of VRAM)

  Another weird thing, Vista SP1 does not install on my machine. tried to uninstall my Anti virus, but that did not help either one.

  Can anyone shed light on my dark screen?

  Hello!

  You have the same problem on an external monitor?
  I m not sure if it s a display problem, mother or software card

  Do you have what display driver installed? You have downloaded the driver from the Web from Toshiba site?
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Screen turns off when the Satellite A45-S250 is moved in the direction of less

  Hello.

  I have a satellite A45-S250. I had no previous problem with this machine. However, when the computer is running too long, or it is moved in the slightest way the screen turns off. I don't even have to type very slowly - or I lose the screen.

  But also, as I have said - sometimes I won't even be near the computer and the screen turns off. When I lose the screen if the light shines on it - I can see, it's always VERY fair Sun. Generally, it will come if I use the FN + F5 button.

  I don't know if it is a screen problem or a connection problem. It occurs with increased frequency. Any suggestion would be appreciated.

  Thank you

  Mindylea1

  Hello

  From your description, I assume FL converter is defective and must be replaced. FL inverter is responsible for the background light and the typical symptom for faulty FL inverter is dimming or blinking display.