Computer sporadically stop alone.

Similar Questions

• I closed and put my computer in its case after use. 3 hours later, when I went to use it again once I took the case and it was hot. It's on and he said "your computer was stopped because of a problem. Anyone had this happen?

  I shut down my computer and put it in its case after use. 3 hours later, when I went to use it again once I took the case and it was hot. It's on and he said "your computer was stopped because of a problem. Anyone had this happen?

  No. I have not experienced this before, after having turned off. It seems that your Mac was not completely extinguished before you he packed. Make sure that it is actually stopped before closing the lid.

• I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  Hi Happyrockgeek,

  Welcome to Microsoft Windows 7 answers Forum!

  This problem occurs if the Windows security .dll files are incorrectly registered.

  To resolve this problem, you can perform the two methods of troubleshooting, check if the problem is resolved.
  Method 1:
  Run (Checksur.exe) system update readiness tool.
  To do this, follow these steps:
  1. download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/default.aspx/KB/947821
  2. try to install the updates again.
   
  Methods 2.
  Reset the Windows Update components.
  1. to reset the Windows Update components automatically, click the fix button in the link below.
  http://support.Microsoft.com/kb/971058 
  2. click run in the file download dialog box and follow the steps described in the fix it Wizard.

  I also suggest you to install the latest version of Windows Installer 4.5.
  Follow the link below to download:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
  and you can also try to install after you turn off the firewall.
   
   
  It will be useful.
   
  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum.

• My computer has stopped downloading of updates due to an era 8007000 b. What does that mean?

  MY computer has stopped downloading of updates due to an era 8007000 b. What does that mean? Donald strickland

  Hello donaldstrickland,

  Thank you for using Microsoft answers Forums.

  Solution:

  Windows Update, Error 8007000 b

  If you receive the 8007000 b error when you try to install updates for Windows 7, the Windows file system transaction log is damaged. The transaction log is used by the Windows file system to recover when a file error occurs. To correct this error of update, you clear the log. Here's how:

  To clear the file system transaction log

  1. click on the Start button and in the search box, type command prompt.

  2. in the list of results, right-click Guest, and then click Run as administrator.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. at the command prompt, type the following command and press ENTER. (This command assumes that drive C is the drive where Windows 7 is installed. If Windows is installed on another drive, change the drive accordingly letter.)

  true fsutil resource setautoreset C:\

  4. you should see a message saying that the operation was completed successfully. If this is not the case, check your spelling and try again.

  5 Type Exit and press ENTER to close the administrator: command prompt.

  6. restart your computer.

  7. download and install the update again.

   

  That should solve the problem.
  

  
  Thank you.

   

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

• My computer has stopped responding to the parameters in my power options tool.

  My computer has stopped responding to the parameters in my power options tool. "IE I settled on 'disable the monitor in 15 min', turn off hard drives in 20 minutes" and "mode standby in 25 minutes.  But it does not follow these parameters. He just continues to run.

  original title: Auto standby until the day before

  You can try to change the settings, see if they meet the new settings and then change back to your desired configuration.

  Please give some more information:

  brand and model of the pc

  current antivirus

  Operating system and service pack

  Also this system to be free of infections:

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  After return with results and INFORMATION.

• whenever I connect to my facebook account to play chesslive or Zynga poker, my computer keeps stopping during my games, please tell me why? Someone.

  My computer guard stop whenever I play games of chess or Zynga poker games in my facebook account. Can someone help me solve this problem?

  Hello

  ·          Is it the computer restarts or a stop?

  ·          You receive an error message or error code when the computer shuts down?

  ·          Is the behavior only when you work when playing games on facebook?

  ·          Have you installed the latest version of flash player?

  ·          You use Internet explorer to connect to facebook?

  ·          If so, what is the version of internet explorer, you have installed?

  ·          Do you remember any recent changes on the computer?

  Check is it y of error codes and error message appears in Event Viewer: how to view and manage the event logs in Event Viewer in Windows XP: http://support.microsoft.com/kb/308427

• My computer has stopped recognizing the HP7450 printer, although showing the connection to the USB "ready".

  My computer has stopped recognizing the printer plugged in usb port

  Hello

  ·        You are able to print a test page for your printer?

  You can try the suggestion given in the article below and check if that helps get the printer to work.

  http://support.Microsoft.com/kb/308028

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer has stopped recognizing my DVD burner.

  My computer has stopped recognizing my DVD burner. It will still read and write to a CD. I don't remember adding something new to the computer, but am not sure when it stopped to work with precision. The Device Manager shows his work; I tried updating the driver but it says that it is the most up to date; I uninstalled and reinstalled; I checked regedit and there are no filters; It is recognized in the BIOS. The store said it is not the hardware and you want to reformat the computer. What can I try before taking this step? Thank you.

  Hello Allisonjak,

  Thank you for your message.  You said try to update the drivers.  You go to the computer manufacturer's website and download/install the latest driver for your computer?  If this isn't the case, it is the recommended method for updating your drivers.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• My computer guard stop and when I return the said "STOP: 0x0000007F.

  I had my HP for 4 years and never a problem, then the other day, that he said that I needed a new activation key so I rebooted with the recovery disk and which corrects this problem, now my computer guard stop and when it restarts, it asks start in safe mode, or start windows normally the error message says STOP : 0x0000007F (0x00000000, 0 x 80503130, 0x00000000, 0x00000000) help please, I have no idea whats going on!

  Hi Doc,

  I suggest you to follow the steps and check if it helps.

  Run the memory diagnostic tool and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

  You can also check out the link below.
  http://support.Microsoft.com/kb/137539
  Note: This link is also applicable to Windows Vista.

• My computer Guard stops running

  My computer guard stop while usage - the screen empties and says offline, but the Tower remains on everything to freeze me.  When she did this, I can not yet turned off the computer completely without closing the power bar (which I know is not good for the computer).  It happens more and more frequently.  My virus scans show nothing, but I'm afraid my computer/IP address is used by an outside source.  What should I do?

  Hi Jim,.

  ·         You receive an error message when the screen goes black?

  Method 1: Start in safe mode and check for the issue. Report of the results.

  Method 2: Run the next Fixit tool to see if it helps.

  Automatically diagnose and repair common security settings on Windows

  Also, check Event Viewer for detailed information on the problem.

  Open event viewer

  What are the information in event logs? (Event Viewer)

• Windows vista update 3 of 3 will not set up, computer continuously, stop and restart; Unable to access computer

  Windows vista update 3 of 3 will not set up, computer continuously, stop and restart; Unable to access computer

  The link below has options to solve your problem of loop.

  http://support.Microsoft.com/kb/949358>

  04:17:0407/17/11

• my computer guard stop and I get an error FFFFFFFE...

  my computer guard stop and I get an error FFFFFFFE...

  Hi kppee,

  Thank you for writing to Microsoft Communities. The problem description, I understand that your computer shuts down randomly. Before you start the troubleshooting steps, I need the required information:

  ·         Did you do changes on the computer before the show?

  ·         What is the brand and model of the computer?

  ·         What is the full error message?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Step 2: If the problem does not persist in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 2: Follow the steps in the articles.

  Optimize Windows 7 for better performance

  Method 3: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  If please follow the methods and let us know if you need more assistance. We will be happy to help you.

  Thank you.

• computer randomly stops... no blue screen, everything stops and goes to sleep

  I have a HP 64 bit, the computer randomly stops, no screen blue, everything stops and goes to sleep... I had 2 technicians to look at, but since it is random, they have been unable to find something that would make this...?

  Select Start, Control Panel. Action Center, click on the down arrow to the right maintenance, click view reliability history. In the chart, you will see red orbs, click on one and it gives details and to the right are another link saying see technical details. You can copy and paste the description in a new message to. Repetition of reports are more relevant than the one off of problems.

• The company went bust DV-7 computer laptop, stop and webcam problems

  Having some problems with my HP laptop bought UK and society, I bought it, disappeared, try to return it or fix the problem with the help

  HP DV - 7 6153ea

  Windows 7 64 bit

  Webcam has just stopped working

  Stay, the screen flashes and the computer simply stops

  Hello

  You are welcome

  What you describe, I would say that it is almost certainly a hardware problem.

  All the best,

  DP - K

• Satellite X 200-line appear on the screen and the computer to stop responding W7

  Hello

  I installed windows 7 a few days ago. I have download all the drivers, but:

  After starting the computer and connecting to windows, if I run an application too quickly (perhaps outlook, google chrome, internet explore explore...), it seems that the pilot does not display (and windows try to restore), and lines appear horizontally on the screen (only have 3/4 left of the screen, the right 1/4 is normal: S). after 30 seconds the screen goes black, and 15 seconds later, a beep comes from the laptop. After that, the only solution is to stop via pressing 5 sec the power :(button

  My graphics card is a nvidia geforce 8700 M GT. I have trid the drivers on the toshiba site (but this is for vista, W7 those not released... for this laptop). It changed nothing, so I download them from the nvidia site (one graduate and Beta 1), same result, it has not changed anyting... (I precise that I uninstall all drivers before reinstalling the new)
  So, I have updated the bios, nothing better.

  I read a solution on the microsoft Web site (for example to remove 5 keys register HKEY_USER /.) DEFAUT/control panel/Desktop and HKEY_CURENT_USER/control panel/Desktop), but these keys did not exist on my system, it couldn't be that.

  So, I'm in the wall.
  Someone has an idea?

  Thank you

  Post edited by: noescape69

  After many internet research, I found an interesting answer, and it was my solution!

  On the nvidia site, you can go the archived drivers.
  For mine (geforce 8700M GT), there are 179, 185, 186 and 195 immediate release. I have download the 179 (oldest), and... everything works great!

  My problem is solved.

  Hope this will help other people!