my hp photosmart c4680 will not print over the network

Similar Questions

• LaserJet P2055DN - do not print over the network

  Configure the printer last night as a network printer (which replaces a former 2300dn LJ). It would not print a test page. To verify that the printer was good, I have loaded the drivers on my laptop and connected via usb.  Was able to print a page of test via USB.  Disconnected usb and reconnected power cable. Released and reset the ip address.  Verified the ip address in scathing of the host.   When I ping the printer I usually lose half of the packages.  There are two other HP printers on the network, a P2015dn and a color 2605dn LJ. Ping their IP back to 100% with a ttl = 255. Ping the p2055 produced 4 packets sent, 2 packets received, 2 lost packets, ttl = 64 2 returns.  I changed the printer cables and exchanged the network switch ports (verified the network switch ports by printing to the LJ 2605) with the same result. I can't get the internal web server to mount, or it partially displays or combinations of these.  If this was the old style removable print server as in my lj2300, I could swap out, but it's not like I can do with this model.  When I send a test page to the printer, it displays "printing", the green light on top flashes, the activity on the network card light flashes, but nothing happens. Finally, I get a «this document failed to print "notification on the host, but the printer still says 'printing' and the lights are still flashing.»  Anyone have any ideas?  I think I'm looking at a bad network/print the server maps in the P2055.

  I also had problems printing over the network to the hp p2055dn. There was no problem via USB printing. All the network settings were ok. Can ping, etc...

  Number of days of bickering, finally found that the Config.Security Network should be reset on the physical control of the printer Panel.

  Press Ok on the Control Panel printer--> press down arrow, you get to Setup Menu Network Config--> press Ok--> a number of arrows down you get to Config network. Security--> press Ok--> you have two options - keep or reset--> choose Reset... Network printing should work fine.

• HP Photosmart C4680 will not print or copy

  Hi all

  My printer does not print (the document is sent to the print queue, but is never printed) and either copy (it just says: "copy" on the screen, but it never does).

  It has been a few months since I use it, but it worked perfectly the last time I did...

  Any suggestions?
  Camy

  Hi Camy_A,

  Thank you for your answer!

  I would try first with our HP print and Scan Doctor .

  So, please take a look at this guide. Printer does not print after upgrading to Windows 7.

  You see another error message when you try to print or copy?

  Hope this information helps and have a great day!

• Photosmart P6350 will not print, but the computer analysis. Have 'Error' on the print monitor

  The two HP1300 Photosmart inkjet machines and displays the same error message and print, however the Photosmart P6350 scans and copies. Scan indicates the all-in-one is online, but I send a print command and the print monitor responds with 'Error' and no other information. I'm puzzled. I tried all the remedies support hp; same result. iMac OS 10.6.8 recognizes two printers but simply shows them "idle".

  Download and install this: http://support.apple.com/kb/DL907

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Photosmart premium will not print from the main tray

  I have a HP Photosmart Premium.  It won't print or copy from the main tray.  Despite the fact that I specifically designated main tray settings, he continues to try to print from the photo tray. How can I fix it?

  My recommendation would be to define the default values for what you do most often.  You can assign the parameter of the bins to automatic and the printer should draw the correct tray based on the other parameters of size and type of media.  If you experience problems with the automatic selection of tray for a particular document or a picture, you can specify the drawer wished for this print job.

  I'm a link the User Guide for your printer.  Click here  I thought you might find useful.

• Photosmart C7280 will not communicate with the network. The diagnosis says that the Radio does not

  Photosmart C7280 C5582A work through a MacBook via a Mac (OS 10.5.7) wireless router was working fine last week.  Today when I tried to print, the printer was stuck in the "printing page 37%.  When I checked the Print Manager, the printer was "slowed" and since I had a lot of trouble with this printer connection before losing, I did what HP told me the last time which was to remove the printer and then recharge it.  Except that this time, once the printer has been deleted, he could not find the printer even after I restarted the wizard and reinstated the SSID and WPA many times.  I have reset the printer and the router by turning off and disconnect power provided, but he still had the same problem.  When I ran the diagnosis, he told me: 'Pass on Radio, Radio work on failure, not plugged cable Ethernet-Pass' the rest of diagnosis is "not run" and other data on diagnostic tests are the Mac addess.  The Diagnostic says the "wireless radio does not work.  Contact HP support.  Unfortunately, it's evening Sat and HP support is closed.  Any help or is this printer dead?  (I spent a fortune on ink cartridges)

  It is indeed a hardware problem then.  I'm sorry.

  I always believe that repair costs would be better put towards buying a new printer.

  However, there may be options that I'm not aware where do not have access to.  This document has some support listed options.

  However, I recommend you contact HP support at the 1-800-474-6836 (to the United States and Canada).  Phone support can provide that more than an estimate on the repair or replacement of the printer with HP and you could compare this with the cost of a new printer.

  A new printer is under warranty and most likely to be an improvement on an older printer.

• HP Photosmart 2610 says that it will not print, because the transport is stuck, but it is not

  my HP Photosmart 2610 all-in-one, said that he will not print because the transport is blocked. Well, he is not stuck. Yet, I can't print. I printed close to 20 000 cards because I bought and installed printer. What should I do? can you recommend a printer to buy. Looks like it's ready for the 'OS' yard HELP.  PAUL LACNY * address email is removed from the privacy *.

  Hello

  Perhaps he is worn and requires little (routine) maintenance (20,000 sheets is a lot of printing).

  As OEM HP is responsible for the good operation of the printer and their drivers. Check with
  HP support, their documentation online and drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  There are three models, so enter-> Photosmart 2610 - in the link of the HP driver and select the version
  you have - then select your version of Windows.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Photosmart 6525: will not print in black

  My photosmart 6525 will not print in black ink.  Clean the printheads 6 times. Cartridge replaced twice. Any suggestions?

  Hello

  Welcome to the Forums of HP Support! I see that you are having problems printing in black. I want to help you solve this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Try the following steps to see if it will solve the problem, HP Deskjet 6520, printers HP Photosmart 6520 - printer prints a blank Page or doesn't print in Blac...

  Here is a document to manually clean the contacts of the cartridge, "not compatible ink cartridge" or "specified ink cartridge needs to be replaced" views for HP Deskjet i...

  Do not take into account the title.

  Here is a document for the reset of the printer. Ignore the title, HP printers - solve the 'problem with printhead,' "The printer failed," 'Ink system failure', or ' 0 x. / c0 > »

  Please let me know the result and if there is anything else I can help you. Thank you.

  

• Computer will not print wireless or network

  original title: my computer is anti-social

  It will not print wireless or network with other computers in the House.  any advice?

  Hello

  1. what version of Windows is installed on the computer?

  2. were you able to print earlier?

  3. are you able to print via a wired connection?

  4. What is the brand and model of your printer?

  5. are you aware of any changes made to the computer, before the show?

  Method 1:

  Temporarily disable your antivirus software, and then print.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Runs the computer without antivirus software or firewall is a potential threat to the computer; don't forget to activate the security software after completing the troubleshooting steps and after you have identified the problem.

  Method 2:

  Check out the following link.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  I hope this helps.

• My kodakESP5 will not print all the object I want to print only a part of it

  My kodak ESP5 will not print all the object I want to print only a part of it

  Hi jakenny,

  You may need to replace an ink or toner cartridge. Check the status information in the queue for low ink or toner messages. If the printer has a status or display area, you can also check for low ink or toner messages on the printer itself. For more information, see change an ink or toner cartridge and view the print queue.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  See the link below and check the print settings.

  Choose printing options

  http://Windows.Microsoft.com/en-us/Windows-Vista/choosing-print-options

  Method 2:

  Try to update the printer driver which might help you resolve the issue.

  Click on the link below for more information on the updated printer drivers.

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

  Check whether the problem is resolved.

  For more information, please see the link below.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• HP 2520HC: install the software of the printer over the network

  Hello

  I use the HP 2520HC series at the office. I use a network connection.

  Printing works fine, however I want to be able to scan as well. I downloaded the printing software, but the only option I choose, connect via USB? The printer is connected to another PC, so this isn't an option.

  Please help me.

  Hello

  such a USB printer allow only all features on a directly connected USB computer.

  Sharing a printer over the network allows sharing of a printer, Windows don't offer any scanner, the sharing feature.

  You can print from another PC to a shared printer, you will not be able to analyze such, to analyze the use of the computer connected directly to your printer via a USB port.

  Kind regards

  Shlomi

• New Photosmart 5520 will not print in black

  I have a new HP Photosmart 5520 printer all-in-one.  Black ink ran out so I replaced it with a previously used ink cartridge which is of the same type # 564 but a XL version.  This cartridge has been barely used.  Now, I just can't get anything to print in black.  It will print in color, but not black.  I tried to turn off the printer.  I put the cartridge in my printer and it worked fine.  What should I do?

  edgarlogcabin wrote:
  

  my printer hp 5520 will not print black

  The in the here document troubleshooting steps may help resolve problems with black not not printing on your Photosmart 5520.  Especially make sure to check the events as on the Six Solution.

• Photosmart 5520: Will not print in black ink

  I did an interview on the print head, but it will not print in black. All other colors are fine and the ink is full so please tell us what can I do?

  Hey @Hughes23,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with printing in black of your Apple devices to your 5520 Photosmart e-all-in-one printer. I can help you with that.

  This document describes How to solve print quality problems with your printer. If you access all the steps to ask you to replace the cartridge or the printer service, instead contact the HP support directly. You can do this by clicking on this link and fill out the form below to discuss the options based on your warranty.

  If this allows you to print, please let me know by clicking on accept Solution below my post. Also, I would like to know if you have any other questions. If not, have a great week!

• PHOTOSMART 5520 WILL NOT PRINT BLACK

  I just replaced the cartridges for my PHOTOSMART 5520.

  After that, color printing has no black color.

  All HP cartridges are not new.

  It's very frustrating.

  for some unknown reason, this problem is gone when I tried printing 2 weeks later.

  To summarize:

  I'm in the United States.

  I replaced the 4 cartridges again purchased at HP online.

  After that, the black will not print if I choose to print in color.

  But if I print in "black and white only", black is in fact works very well.

  I tried everything suggested in the web forum such as cleaning, alignment, prower AC cycle,... etc. He has not fixed the problem.

  I stop using the printer for 2 weeks. But yesterday, I try agin, then the problem is gone.

  I don't know what to say. Thanks to HP for assistance.

  Overall, the servie is nice - just called him several times.

• HP photosmart 5515 will not print black.

  HP photosmart 5515 do print not black, but is printed colors (cyan blue yellow). Printer shows full inks on all colors.

  There is a document with steps to help resolve a print quality problem where black ink will not print Photosmart 5515. This document can be found here.

  I hope this helps.