Computer will not recognise TomTom and does not connect. A message appears MFC stopped working and Windows had to close.

Similar Questions

• Application that created on another computer will not connect usb-camera

  Hello, friends!

  I have a problem:

  My application that was created on my computer does not connect usb-camera on the other computer. I installed the LabView run-time engine and the runtime of vision on this computer but it is not useful :-(application is open, but the usb device not running.

  I'll be thanked for any help with this problem!

  Thank you very much!

  It's the solution to the problem:

  Solution:
  To run an exe containing NEITHER-IMAQ for USB functions, follow these steps on the computer that is running the EXE file:

  1. Install the following execution engines:
     • LabVIEW Run - time Engine (same version that was used to develop the VI)
     • Execution of vision engine (same version that was used to develop the VI)
       • One Vision single-seater deployment license is required for each computer target on which you install the runtime of the Vision. See all the related links for more details.
  2. Copy the following dll files to the directory on your development computer system, usually C:\Windows\system32 directory of your target machine system.
     • ImaqDirectShowDll.dll
     • ImaqDirectShowExport.dll
  3. Register at ImaqDirectShowExport.dll by the Windows Start Menu , click run. Type regsvr32 C:\WINDOWS\system32\ImaqDirectShowExport.dll, and then click OK to register the DLL.

     If you are on a different operating system or if the system folder is different and that you want to copy the path instead of typing all the way, you can drag the file to the command line at the prompt to run it, highlight the path, right-click and select it copy.  Paste in the command prompt by right-clicking and selecting window block.

     The ImaqDirectShowDll doesn't have to be registered.

  Once these steps are completed, and the DLL is registered successfully, your EXE will work.  Vision Acquisition software or Vision Development Module must be installed on the target computer.

• my computer will not connect to wireless internet

  I got a bad virus on my computer and I had somone who knew what they were doing to clear my computer.  Once they wiped it they put all the disks provided with the computer back on, but I can't conect to wireless internet. When I go to connect to a network, it is not see the same there is wirless avalible. I know the router is working because my phone can pick up the signal. I don't know what to do?

  Hello

  Turn off the router (unplug power cord), wait a few minutes and then turn it back on.
  Restart and try to sign in.

  1 do these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------

  2. your router could be suspicious here, you have successfully updated its firmware as a possible solution? And
  I would update your WiFi drivers on computers. How you are positioned in the router?
  Are there obstacles in the path?

  Actually try updating your driver and disabling the network logon. You can use a wired connection
  If possible or download drivers on another computer and transfer them via removabler
  media.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver-
  Note the version - click on update driver (can't do anything as MS is far behind certifying)
  drivers). Then right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver
  stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other updated drivers Vista
  love the updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE like
  they are almost always old, and you can search for drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - define the network locations
  page - down left click on merge or delete network locations - REMOVE all instances of your network
  (and all the others you no longer use)-RESTART. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an address IP of certain routers or from certain non-Microsoft
  DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• My computer will not connect to the internet. I have wireless explore 6. System displays all NICs with a yellow warning sign. Icons at the bottom of the page are all gone along the bars indicating connection strength.

  Error code 39 on all network adapters
  Recently released the Fix - It professional. The program runs and updates to ensure that spyware and viruses are not on the system. This time something came and said 'this will change some programs and may affect the way your computers run' (something like that) then it poped out and the deed has been done.
  I reinstalled all the drivers for wireless cards
  Still no connection and no bar at the bottom right of the screen.

  Help, please

  Thank you
  Tony1989

  Hello V-ness,

  Thank you for your message.  Please follow the steps below and provide feedback so that we can better help you get this issue resolved.
  Click 'Start' > select 'control panel '.
  Double-click "network connections."
  Do you see your wireless connection?  If so, does say disabled?  Can you do a straight and click enable?
  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• My IPad is connected to the WiFi router but will not connect to internet. My Internet works on my IPhone and Mac Book

  Since last night, my IPad connecting to my WiFi router, does not connect to the internet.

  Internet connection works for my IPhone and MacBook.

  Hello

  Go to settings resets the network settings on iPad.

  After reset, enter your key wireless router.

  See you soon

  Brian

• iPhone will not connect with iTunes on a Sony Vaio laptop (Windows 7)

  I can't connect my iPhone to iTunes on my Sony Vaio laptop. I tried uninstalling and reinstalling iTunes several times, as recommended on the Apple Support communities, nothing helps. I also deleted and set my phone from scratch. The device is recognized as a storage device, but not iTunes. Can someone please advise as to why this would be the case? As far as I know, everything on my laptop is up-to-date and the phone will not always be recognized.

  Thank you.

  You've probably seen this already, but if not - http://support.apple.com/kb/TS1567 and http://support.apple.com/kb/TS1538 peuvent help (helped when my iPod is not in the same way).

  If no joy, as a trial of test creates a new user account and see if it can connect to that?

• My Photosmart 5520 will not connect on my laptop after I updated to Windows 8. 1

  Hello, I stress a lot because my printer connect via wifi. I started University last week and I'm going to use my printer almost every day when I start getting homework and what not. The problem started when I upgraded my Sony Vaio Windows 8.1 since that day I couldn't get my printer to work. I really DIND'T pay much attention because I was on vacation and I had no use for it, but now I need more than ever. I had tried all the solutions desconecting and tries to connect but I have no chance. 'The printer could not connect to the network' this is the error I get.

  When you upgraded to Win 8.1 you would update the software and drivers to Win 8.1?

  Download and install the full software and drivers here.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=us&DLC=en&sw_lang=&product=5157536#N173

  Try now.

• Set to automatic update ran CHKDSK and my computer will not connect

  Is there an automatic update on demand. When I turned on my computer, it ran a CHKDSK. I saw that he has deleted a file named $I381. When he started to update and got to step 3 of 3, he keeps trying to update. It restarts automatically and goes back to step 3 of 3 screen continuously. I tried closing down and turning them back, but not luck. Me should not be in a journal or anything. It just keeps trying to complete step 3 of 3.  Does anyone have an idea of what past? And how to fix it?

  See if this sugesstion can help you:- http://support.microsoft.com/kb/949358>

• computer will not connect to a computer via bluetooth nother

  I am trying to connect two computers using bluetooth for file transfer, but I get error 0 x 80070057 trying to pair.
  usb bluetooth adapters are about 1 foot away.
  two computers running windows 7 home 64-bit
  Help me please

  Hi Jacob,

  1 do you have Bluetooth devices internal or external connected to the laptop?
  2. have you checked if all the Bluetooth drivers on two laptops are very well installed?
  3. this working fine before? If Yes, are you aware of changes to the computer before the show?
  4. is this a problem only when connecting these 2 computers?

  We will analyze and identify the cause of the problem.

  Method 1:
  

  You can run the Fixit and see if it helps.

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems
   
  Method 2:
  
  I would also say to browse these below items that could help you to fix this problem.

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Note: It also applies to Windows 7

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-in/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Hope this information helps. Response with status so that we can help you.

• Computer will not connect to the printer over the network. How can I configure the fax as well?

  I'm new here and just beyond frustrated trying to get this to work for my office.

  My other printer works by USB because my computer give me a warning throughout the day that the USB is corrupted. Anyway, I got a new printer and I am trying to connect through the network. My iPhone prints through it. My computer OS is Windows 7 64 bit.

  My printer is HP Officejet Pro 8600 all-in-one

  I want to connect from the network, and I want to set up the fax. My phone does not work when I plug the line in the printer then phone ext line into my phone.

  I'm confused! Help someone! Please, I beg you!

  Hi ahagereo,

  To connect the printer to your network, follow the steps outlined in the document below.

  http://support.HP.com/us-en/document/c02886889

  Fax: Make sure you have the telephone line connected to the port of line 1 to the back of the printer.

• My computer will not connect administrator account

  When I get to the home screen, and I try to put my password to open a session in my account (which is also my administrator account) .He told me that user logon Service failed to connect.

  I can connect in all other standard users without problem, but when I try to use the administrator command prompt, I get a message requesting my password--and it does not use the command prompt.

  I also tried to do this in safe mode, but it simply doesn't. What should I do?

  You can try in 2 ways. .....
  Assuming that your full is the error message:
  The user profile service has not logon. User profile cannot be loaded

  1 use this tutorial:
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  2. do a system restore. Choose a date where you did NOT have this problem as your restore point:
  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  t-4-2

• Kodak easyshare will not install a message appears says not compatible

  I can't get my kodak easyshare camera to work on the new computer. message arrives not compatible

  Try right-clicking on the file in question and on the Compatibility tab .exe Vista or XP mode (s).

  See you soon,.
  Jerry

• My iPhone 6plus Bluetooth will not connect to my headset, after having worked for 2 weeks, that has happened on 2 different pairs, now my new pair doesn't connect at all?

  My iPhone more than 6 is running iOS 9.2 where after awhile, it seems not longer connect to my Bluetooth devices. Now I have a new helmet and it won't even find them to connect.

  Replace the BlueTooth devices in pairing mode and they should reconnect.

• Why my computer will not pick up my external hard drive?

  Why my computer will not pick up my external hard drive?
  using Windows 7 sp1

  Original title: usb

  Hello Fred,.

  Windows 7 sometimes has trouble recognizing external drives connected to the USB ports. There are a number of possible corrections for this.

  1. make sure you that the USB port in question works with another device, that you know works. For example, take a mouse that you know doesn't work and plug it into the USB port is connected. The mouse still works? If Yes, go to #2.

  2 do a reset power coercive.

  1. Unplug the power cord. Then (on a laptop) remove the battery.
  2. Unplug all USB devices.
  3. Leave it alone - don't connect or reconnect the devices for several minutes.
  4. After several minutes plug the power supply cord.
  5. Then install the battery.
  6. Turn on the computer and restart as normal without plug any USB device.
  7. Connect your devices one at a time and let them install as usual.

  The external hard drive works now? If not, go to #3.

  3. I have and others have used an application of part 3, the freeware Aomei Partition Wizard, download here: http://download.cnet.com/AOMEI-Partition-Assistant-Standard-Edition/3000-18512_4-75118871.html?tag=mncol;1 (only use the Direct download link). Once installed, you need only browse the external drive and select it, then click Properties. That's all; simply choose the drive is enough to get the drive recognized by Windows 7, no formatting required.

  I would like to know if one of these methods works for you. After back here with your results.

  Kind regards

  BearPup

• My router wrt120n will not connect to my ps3

  My router wrt120n will not connect to my ps3, it was working fine, now it dosnt send a signal, but my computer is connected and works fine. Any suggestions on how to solve this problem. I have tried reseting and leaveing it and the modem unplugged for a while, but did not work.

  So I clicked on the icon of the router in the center of the page. went to "changing wireless protection" and everything I had already reset. Now, it works great!