Configuration network/questions redundency

Similar Questions

• Configuration network LaserJet P1606dn

  Hello world

  I have a problem with establishing a new LaserJet P1606dn on our network. The installation software provided with the printer assumes the environment uses a DHCP server to obtain an initial IP address and then you can evaluate the printer through the web interface and change it. My problem, we do not have DHCP on our network and I need to set up an IP address on this printer. My question, is there any other utility that can be used to find the printer, and then set the printer with a static IP address.

  Thank you in advanced for assistance.

  Steven

  Too bad. I found another way to access the printer. It seems to have assigned the printer an IP 169.254.x.x wherein I changed my desktop to the same subnet and then access the printers web interface to configure networking for the correct IP subnet.

• Configuration VPN 3000 - redundancy - management

  We have two hubs configured as a redundant pair.

  I realize there is no automatic method of synchronization config but wondered which is the easiest and fastest way to copy changes throughout.

  Is it possible to save the config and just edit the IP addresses for the public and private interfaces before loading it on the backup device?

  All done and managed?

  Other advice - we do not have a box of ACS btw?

  Thanks in advance.

  The simplest is that you have suggested, copy the config from the original, and load it in the backup. Restart the backup and it will come to the top with the exact configuration as well as the original, so it is wise to disconnect it before restarting network, change IP addresses via the console port, and then plug it into the network.

  Otherwise, if you feel comfortable, you can copy the config from the original, edit it using any text editor, search for all occurrences of the original IP addresses and change them for backup, save this file, copy it to the backup and it reboot. It should come with the same exact configuration, just different IP addresses.

  I use this second technique each week when visitors send me their configuration files for troubleshooting, I just change their IP addresses to my hubs ones, copy the file to the top and restart my hub, sometimes with their config but my IP addresses.

  The only catch is to make sure the hubs are of the same type. For example, don't just edit a config file 3080's and copy it into a 3005, cause, they are different. Similarly, make sure that the versions of the software are the same, different versions SW to write different things in the config file. If your in are a redundant pair, then it should be OK if.

• How can I configure network server in blackberry phones smart blackBerry bold 9700

  How can I configure network server in blackberry bold 9700

  I want that my third-party applications to access the organization intranet using your organization's network.

  When I tried to change the permissions of third-party application, it shows RIMconnections, interactions, data from the user... don't allow, deny permission is there.

  How can I set thesehttp://docs.blackberry.com/en/smartphone_users/deliverables/23895/Third_party_application_connection...

  Yes, if you read the link you posted, these settings are for OS6 and higher devices.

  Not for OS5 and you're on OS5.

• Strange host Networking question

  I have a vmware host in a cluster. The strange thing is that all of a sudden when I go to configuration-> network-> vsphere standard switch, I'm not able to see the VMkernel Port with the IP address assigned to the vmkernel port used to connect to the host to the cluster.

  I have attached two files. screenshot1 comes from other vmware host in the cluster which seems correct that screenshot2 however is the host that is not look right. I can always ping the address which does not appear in the vmkernel port and I can connect to this address using the vsphere client. WTH?

  A help is appreciated.

  Thank you very much

  as you go to the standard switch configuration:

  configuration--> network--> switch vsphere standard

  There you have a tab with distributed switch:

  http://everythingshouldbevirtual.com/wp-content/uploads/2012/07/Create_Distributed_Switch_VMK-Ports_iSCSI.PNG

• Networking question in VMware Workstation / nested ESXi network configuration problem

  Hi guys,.

  I am trying to set up a virtual lab, I setup a domain, a vcenter server and up to 1 ESXi host controller.

  I am really struggling with the network aspect in establishing a vmnic for storing shared, please see the attached screenshots and a few questions:

  1. Is a vmnic a real network map? or vmnic correspond to "network adapters" that you put in place since the setting of your virtual machine?

  I followed a tutorial and implement 3 NICs on the ESXi host, in Bridge mode, I tried this in my configuration of vmworkstation and I lose the connection to my server vcenter to the ESXi host.

  See screenshot attached to how I configured my ESXi host, screenshot is called 'screenshot2esxihost network', I run got each of the maps defined on NAT network.

  

  See also the screenshot of how I have my configuration of network settings in my VMWare Workstation, screenshot is called "screenshot1. the tutorial does not show how it has its editor of the virtual network configuration, but it puts its ESXi host NICs in BRIDGED mode, and I'm guessing that you can set this time within the virtual network adapter. If someone could tell me what changes should I make in there and on the network cards in my ESXi host, which would be really useful.

  

  My domain controller, server ESXi hosts and vcenter are currently on the 192.168.86 range, which currently stood at NAT

  See also a screenshot from the vsphere client - I don't see a vmnic "vmnic0", my goal is to be able to add a "vmnic2" for a separate storage network.

  

  any help would be received with gratitude, I VCP510 review at the end of the month and really hope to be able to get my lab setup as soon as possible.

  The vmnic is the rising 'physical' of an ESXi host. So with the 3 network cards that you configured for the host in VMware Workstation you will see under "Network adapters" and you can use them to vSwitches in the section "network".

  André

• Configuration of network management redundancy

  Hi all

  I'm new in vCenter (we have v 4.1).

  Now, I try to create the HA cluster, but my servers get warning that 'my management network has no redundancy' - I want to solve this problem.

  I have two nic, the two are connected, but only on a management network is configured.

  I found a lot of information - how to create clusters, disable this warning, etc, but anyone describe how to create a management network redundancy.

  Can you give me some advice or a link to the doc?

  Thank you.

  Marc Alain

  Enjoy http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004700

  If you have found this information useful, please consider awarding points to 'Correct' or 'Useful'*.

• configuration of the redundancy of the network management issues

  I have configuration problems: Please see attachment.

  When you take a look at additional information on the adapters, you will find that they are declining.

  I guess that the drivers all went well, but they are down.

  I looked around everywher (I think) to get them to the top, so I can continue my setup.

  I think this will help me solve my problems of configuration.

  Can you tell me how to show my NIC?

  Thank you!

  Hello

  have you checked all cables if they are connected well?

  If Yes, reboot the host and check if the vmnic back!

  MCP, VCP

• Network questions and caused by the Apple TV 4

  My apologies for the long post...

  I bought a new Apple TV 4 this week an upgrade to ATV3. The main reason for this is to get proper access to my subscription of Apple's music on my living room AV setup - it would have been nice to get just a small update on the ATV3 to work well with Apple music!

  In any case, the addition of this innocuous little device seems to have caused all sorts of questions about my home network.

  I have connected the ATV4 using ethernet to my Virgin Super Hub, made the simple configuration via iPad and has proceeded to explore - everything seemed fine. Even downloaded the speedtest excluding interest and who reported a healthy 90 + MB. Made the usual check for updates and this 9.0.1 installed.

  First of all, we noticed the following aspects with the ATV itself:

  1. During the operation, she would bring "no network connection.
  2. By looking at the network settings it shows connected Ethernet but had lost it's previously that would deal with DHCP and DNS details
  3. It does not recover
  4. Just physically remove the cable disconnected and reconnected would force it to find an address - done interesting a different each time. Other devices on the network tend to have the same address (as is usually the behavior, I expect), but he may then lose later
  5. In addition, when it is connected to the speed sometimes fall causing stuttering/buffering of the same Apple music / local libraries
  6. If the ATV4 is awakened from his "sleep" he also still not address
  7. I removed the Ethernet and tried the same thing with Wi - Fi - it presents a similar loss of address - so I conclude its not related to the transport

  I did the usual restart/re-Multi-Power of router, switches and access points - I have an Apple Time Machine (in switch mode + providing a WiFi access point second across the House), over a gigabit 8 ports switch with the Virgin cable router. In no case a network complicated and so far I've had NO problems with the internal network - before the addition of ATV4 we had several wired (Macs, PS4, PS3, Smart TV, home automation) and wireless (ATV3, Blu - ray, another PS3, MacBook, iPads, iPhones, etc.) ANY abnormal behavior of customers well. But still the problem persisted. I had to leave the investigation, but left the ATV on and connected via ethernet.

  Now, here's the next interesting issue. My son said that it could not connect to the WiFI network with his iPhone 6. The phone would see the ads these two WiFi networks, but on the selection or just would not get an address never (even with reboots, restorations, etc.), to the point where he thought the phone had a problem with the hardware (also proposed by the Apple Support). Other devices seemed (at this time) to connect OK, even more reboots to network equipment does not solve this problem. So iPad (already OK) my wife had the same symptoms. A little Google and look on this site of the updated support various complaints about the networks ATV4, slow speeds, etc. - and including an addition can cause the ATV4 hitting on questions to other devices that you try to use the same network. So I turned off the ATV4 and ' hey presto' the phone that don't would not connect worked immediately, iPad & other devices connect and can access the internet + LAN in quick as they did previously.

  Now, of course, this probably isn't a big problem for everyone (otherwise this forum would be full of only those complaints), but I can only conclude that the Apple TV 4 (9.0.1) is at fault. If I just keep the same and pop my old ATV3 instead I get NO such problems.

  That's all very boring, because I also bought a second ATV4 as a Christmas gift for one of my sons. Is it really £300 + in the sewers?

  The other people in this community, see some or all of these questions? Permanently or intermittently? Has anyone received all responses support who can help me? I will of course follow up with Apple myself.

  Now, of course, this probably isn't a big problem for everyone (otherwise this forum would be full of only those complaints), but I can only conclude that the Apple TV 4 (9.0.1) is at fault. If I just keep the same and pop my old ATV3 instead I get NO such problems.

  That's right, that is not a problem for the vast majority of users, in fact I'll go far as to say that I only saw one or two messages with 'Similar' issues. May I suggest you try in another place (maybe a friends or preferably to an Apple store), I'm inclined to think you will find it works perfectly, if it isn't taking it back for a replacement.

• A web site with the IIS configuration network location

  Is there information on how to set up a web site to a network location.  I have a shared directory of Mac that I have access to my Windows Vista pc.  I have a Server IIS Web on this PC and want to test the Mac files with the IIS Web server on the Windows computer.  I created a site in IIS and pointed on the shared drive, this resulted in an error: cannot read the web.config configuration file.  I tried a different approach: create a local site to wwwroot, then create a virtual directory.  This brought the same error: the requested page cannot be accessed because the configuration data of the page are invalid.  I have IIS 7 on Windows Vista Business Edition.

  Hello

  Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the forums of IIS. Please post your question in the following link for assistance:

  Link to the forum:

  http://forums.IIS.NET/1047.aspx

• VMWare Oracle network question

  We currently have an Oracle server, that has a connection LACP on 4 network cards to 1 GB for a netapp FAS2040.   Unfortunately it is a failure then we will create a virtual machine.  We have it online right now, but I have a question.  VMWare server has 4 1 GB NICs to shared resources on a single VMXNET 3 NIC will be able to push as much traffic that may 4 NICs trunked?  Or do I need to create a similar configuration?  Has anyone else made something like that?

  Thanks in advance.

  Vmxnet3 supports up to 10 Gb/sec transfer rate. So you can have your uplinks on LACP certainly and present 1 virtual nic VMXNET3 virtual machine speeds, even if your bottleneck will most likely be that you'RE Ops / s disc.

  See this document for more detailed information on the performance of VMXNET3

  http://www.VMware.com/PDF/vsp_4_vmxnet3_perf.PDF

  Kind regards

  Rick

• The correct configuration on the redundancy help

  Hello

  We have a VMware ESXi 3 hosts 4.1 with two Equallogic ps4000 infrastructuer, an AIRLOCK and one with SATA drives.

  It is connected with 2 switches, where everything is connected, so redundancy "should" work.

  On ESXi server, we have 8 network ports, in vCenter, we used 2 NICs for the management and vmotion, 2 for iScsi traffic and 2 for network access VLAN.

  Some time ago, one of our switches failed, and all the VM rebooted because they lose the connection, 2-3 minutes later they came back on the use of the other switch, but it should not happen. I did a little research and discovered that perhaps consolidation of NETWORK cards has not been configured no doubt.

  On vSwitch 2 where will my Iscsi traffic, I used a VMkernel port on both network adapters, it should work, right? What have I done wrong? Someone has an idea, what configuration should be placed on the consolidation of NETWORK cards to do this work.

  After a bit of trouble, I clicked on change properties on vSwitch 2, clicked VMkernel port ISCSi, hget to exepotions political in nic teaming configuration. Failover detection network: Link status notification only, switches: Yes, the failback: No.

  When I disconnected the cable, vmwares worked, when I unplugged the swich, RM of vm. I heard when using network cards, should I create the vmkernel ports on this vswitch using redundancy, is this true? I also thought that the ISCSI port group traffic would inherit the rights of the nicteaming, but this happens for some reason any. Someone has an idea of this network which is the best practice, when you configure the redundancy with multiple cards in vCenter?

  Thx for all the help.

  Bit of an old thread, but in the possibility it has not been resolved, here's your answer:

  With Equallogic units, you will need to configure a vmkernel by physical uplink port.

  1 vSwitch

  2 unique physical network (vmnic3, for example vmnic4) cards

  2 vmkernel ports

  -vmk1-> override set failover of vmnic3 active and vmnic4 unused

  -vmk2-> override unused vmnic4 set failover active and vmnic3

  Bind the vmkernel ports to the iscsi hba software and configure storage.  To improve the performance set up frames on all vswitches, switches and vmk.

• VMware Workstation 7.1.2 - Linux networking questions

  I am on Windows 7 and I have a Ubuntu 10.10 I can't accept an IP address. I don't know if my question is Ubuntu configurations or VMware. I have a NETWORK adapter that is set to Custom (VMnet7) which I configured with DHCP. My goal was to implement a custom network (VMnet7) so that they can communicate without an external connection. I added Windows clients and receive DHCP addresses without problem. When I add my Ubuntu box, he does not get the IP address. I have the set eth0

  Auto eth0

  iface eth0 inet dhcp

  When I restart the network interface, he seeks an IP address by sending a DHCP request to 255.255.255.255, but never received an answer from, and finally abandoned. This machine has been downloaded from another system and pulled upwards. Any suggestions on the place where to proceed to diagnose the problem?

  -jyxavier

  I have a NETWORK adapter that is set to Custom (VMnet7) which I configured with DHCP. My goal was to implement a custom network (VMnet7) so that they can communicate without an external connection.

  FWIW VMware Desktop products already have defined VMnet1 for host only then why the need to create a host only VMnet7?

  Make sure that the client's network card is verified connected.

  What Linux Distro do you use?

  If the suggestion of sflanders does not then archive and attach the vmware.log for this virtual machine files and join a response message.

• Configuring network DMZ, internal using Nexus 1000v

  Hello peoples, this is my first post in the forums.

  I am trying to build a profile for my customer with the following configuration;

  4 x ESXi hosts on the DL380 G7 each with 12 GB of RAM, CPU Core X 5650 of 2 x 6, 8 x 1 GB NIC

  2 x left iSCSI SAN.

  The hardware components and several design features, on that I have no control, they were decided and I can't change, or I can't add additional equipment. Here's my constraints;

  (1) the solution will use the shared for internal, external traffic and iSCSI Cisco network switches.

  (2) the solution uses a single cluster with each of the four hosts within that group.

  (3) I install and configure a Nexus 1000v in the environment (something I'm not want simply because I have never done it before). The customer was sold on the concept of a solution of cheap hardware and shared because they were told that using a N1Kv would solve all the problems of security.

  Before I learned that I would have to use a N1Kv my solution looked like the following attached JPG. The solution used four distributed virtual switches and examples of how they were going to be configured is attached. Details and IP addresses are examples.

  My questions are:

  (1) what procedure should I use to set up the environment, should I build the dvSwtiches as described and then export it to the N1Kv?

  (2) how should I document place this solution? In general in my description I will have a section explaining each switch, how it is configured, vital details, port groups etc. But all of this is removed and replaced with uplink ports or something is it not?

  (3) should I be aiming to use a different switch by dvSwitch, or I can stem the heap and create groups of different ports, is it safe, is there a standard? Yes, I read the white papers on the DMZ and the Nexus 1000v.

  (4) is my configuration safe and effective? Are there ways to improve it?

  All other comments and suggestions are welcome.

  Hello and welcome to the forums,

  (1) what procedure should I use to set up the environment, should I build the dvSwtiches as described and then export it to the N1Kv?

  N1KV replace dvSwitch, but there isn't that a N1KV ONLY where there are many dvSwitches N1KV would use the same rising in the world.

  (2) how should I document place this solution? In general in my description I will have a section explaining each switch, how it is configured, vital details, port groups etc. But all of this is removed and replaced with uplink ports or something is it not?

  If you use N1KV you rising the pSwitch to the N1KV.

  If you use dvSwitch/vSwitch you uplink to the pSwitches to the individual dvSwitch/vSwitch in use.

  (3) should I be aiming to use a different switch by dvSwitch, or I can stem the heap and create groups of different ports, is it safe, is there a standard? Yes, I read the white papers on the DMZ and the Nexus 1000v.

  No standard and Yes in many cases, it can be considered secure. If your existing physical network relies on VLANs and approves the Layer2 pSwitches, then you can do the exact same thing in the virtual environment and be as safe as your physical environment.

  However, if you need separation to the layer of pSwitch then you must maintain various vSwitches for this same separation. Take a look at this post http://www.virtualizationpractice.com/blog/?p=4284 on the subject.

  (4) is my configuration safe and effective? Are there ways to improve it?

  Always ways to improve. I would like to start looking into the defense-in-depth the vNIC and layers of edge within your vNetwork.

  Best regards
  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, 2010

  Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security'VMware vSphere (TM) and Virtual Infrastructure Security' [/ URL]

  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]

  Blogs: url = http://www.virtualizationpractice.comvirtualization practice [/ URL] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://itknowledgeexchange.techtarget.com/virtualization-pro/ TechTarget [url] | URL = http://www.networkworld.com/community/haletky Global network [url]

  Podcast: url = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcastvirtualization security Table round Podcast [url] | Twitter: url = http://www.twitter.com/TexiwillTexiwll [/ URL]

• Configuration network problem

  Hello world!

  I have the following Setup: a virtual server with network three ports eth0 and eth2. eth0 is used fpr administration of the VServer.

  eth1 is disabled. Now, I have configured eth2 as a bridge to the virtual machines. For now, it works pretty well with

  exactly one IP configured on the host computer for eth2. Now it is true that there are several more mapped IP addresses

  on eth2. The amount of these IPs may change over time, and I don't want to configure the interface on the host

  whenever I listen to new addresses. These IP addresses are all on the same network using the same program and

  subnet and gateway. So my question is:

  How should I configure eth2 on the host (debian) system for all incoming traffic on eth2 is filled to the virtual machines?

  Thanks a lot for your help.

  orkano

  PS: Here is my file interfaces:

  This file describes the network interfaces available on your system

  1. and how to activate them. For more information, see interfaces (5).

  1. The loopback network interface

  Auto lo

  iface lo inet loopback

  1. The main network interface

  Auto eth0

  iface eth0 inet static

  address XXX. XXX.226.101

  subnet mask 255.255.252.0

  dissemination of XXX movies. XXX.227.255

  Portal XXX. XXX.224.1

  Auto eth2

  iface eth2 inet static

  address XXX. XXX.246.10

  netmask 255.255.255.0

  dissemination of XXX movies. XXX.246.255

  Portal XXX. XXX.246.1

  Welcome to the forums!

  orkano wrote:

  How should I configure eth2 on the host (debian) system for all incoming traffic on eth2 is filled to the virtual machines?

  You must run ' vmware - config.pl ' to configure virtual networking. Then you choose eth2 as your adapter to fill. That's it for the side host. The customer must have a vNIC, type "bridged" and their own IP configuration valid IP range of the physical network subnet where eth2 is attached to.

  That answer your question, or have I missed something?

  AWo
  VCP / VMware vEXPERT 2009

  = Due to a lack of employees, human beings humans are working here. -Treat it with care, they are rare. =