Configuration required to use the fingerprint reader

Similar Questions

• Start your computer by using the fingerprint reader is not working - T450s

  It did not help:
  -From the bios feature works...
  -Ability to select in the application "" connection of fingerprints digital use instead of power ".
  -Update the BIOS
  -Updated FingerPrint Manager Pro
  -The placement of the bios 'Legacy First' or 'Legacy' only

  I am grateful for the support.

  You cannot use the fingerprint reader as a replacement for the power button more.

  The former supplier the Authentec fingerprint readers, was bought by Apple some time ago. As a result, Apple holds the respective patents.

• How to use the fingerprint reader in windows 8

  I am currently using HP ProBook s 4230. It had windows 7 installed and then I upgraded to windows 8. How do I use the fingerprint reader, I could use it earlier, but now I don't have a possibility to use as a security tool. any suggestions?

  Hello

  Please go through the article helps HP at the following address and check.

  Troubleshooting a (Windows 7, Vista, XP) fingerprint reader

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c02519007#N742

  Note: Even if the article is for the Windows 7 operating system, the suggestions are applicable to your scenario.

  As well as the suggestions above, to update the Chipset drivers and check if the function keys work fine.

  Please post here with the State of the question and we will be happy to help you further.

• How to configure and use the fingerprint reader?

  I have a Pavilion dv7 - 6157cl laptop with Windows 7 Home Premium 64-bit.  A second person may also use the player?  If this is not the case, the password feature can be used by someone else?  I need a complete and detailed instruction for the fingerprint reader.  What player software that is mentioned in the PDF manual?  No software is given.  I don't know where to start.

  Thank you

  Here's a thread on this, the first part is on the installation, which you can skip, you should already have installed everything, so move on to the configuration section.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/HP-SimplePass-identity-protection-validity-fingerprint-and/m-p/742013

• Portege M700: Cannot use the fingerprint reader after update for Firefox 3

  Hey

  I have a Toshiba Portege M700 Tablet and with the truesuite software on a fingerprint reader and password Bank plugin.

  It's all working fine and dandy with firefox 2.
  Then last night I went and updated for firefox 3 and now I can't log in to Web sites with the fingerprint reader.

  No error messages, nothing. I can say that the truesuite or Bank password software is not detecting firefox 3. I've updated to the latest version that I could find, 2.0.2.0.

  I found this thread by telling me the process of update of firefox it breaks and I should completely uninstall and reinstall firefox, which I did.
  That didn't fix it.

  Then I completely uninstalled and reinstalled truesuite. That did not help either.
  Its still broken.

  Anyone know a workaround or a way to fix this, or should I wait and see if there is an updated version of the password database? (I find it unlikely because this isn't really a standard program)

  Hello

  I think that the new Firefox version is not fully tested and possibly it s not completely compatible with the 3rd party applications.
  I remember the same problems with older versions of firefox. Finally, it has been resolved.

  But why you don t use internet explore? As far as I know the fingerprint works without a problem

  In any case if you want to continue to use the browser firefox 3 so I think that the only solution is to wait for an update.

  Concerning

• EliteBook 8460p: using the fingerprint reader to log on Windows 10.

  I recently picked up this 2nd hand computer laptop for use at home. I was happy to find that it has built in fingerprint reader that will keep my children on my account. This is recognised by Windows 10 on the device as a biometric device manager / Validity Sensor. However, I have no options to activate Windows Hello on my account and found nothing on the Windows support on with Microsoft to respond to my problem. The supplied fingerprint reader will get an updated driver that gets 10 Windows to recognize as supported by Windows Hello? Is it already work? Do I need additional software that the laptop was bought only with its OEM Windows 7 Pro OS installed and nothing else. Any help would be appreciated.

  Concerning

  Rachel

  Install HP customer Security:

  FTP://15.240.238.55/pub/SoftPaq/sp63501-64000/SP63 793. exe

• Question by using the fingerprint reader to connect to Windows 8 on Elitebook 2760p

  Hey all. The fight currently with my 2760 p to use fingerprint for you the reader connect to Windows 8 x 64. I currently have all the other pieces of the puzzle installed, because I found in older subjects, but when at the login screen, sliding my finger does nothing and it only invites me to enter a password with no option for the fingerprint.

  Installed...

  (1) validity sensors WBF driver 4.3.100.0

  (2) HP ProtectTools 8.0.2.1341 (applied the registry patch to get the install to actually work)

  (3) HP SimplePass 6.0.100.252

  It is a new installation of Windows, so no real applied changes.

  I have my fingerprints stored in SimplePass and I can save to other sites. But, if I block my computer, Windows shows an icon of a keyboard with my username next to him, said to "Verify password" and a place to enter it and another option at the bottom of the login with SpareKey screen. Sliding my finger does nothing. I checked in SimplePass and tick the option to connect to Windows with the reader. Am I missing something? Thanks for any help you can provide.

  A ditch all that HP bloatware and restart. Uninstall everything.
  
  All that I have a clean installation of Windows 8 Pro x 64 was to get the starter edition of Authentec Truestuie. I don't have an elitebook not sure if it's the same manufacturer, but you can get it on the manufacturer's website.

• Where can I use the fingerprint reader?

  Hello.

  Is it possible to use the Thinkpad T61 fingerprint reader, is to remind the user password in windows XP applications.

  As Mozilla Firefox saved passwords Manager or some other programs "who need password"?

  You can use Lenovo Thinkvantage Password manager to remember your passwords and then use fingerprints to log.

  Password Manager can support HTML based Windows Internet Explorer, Firefox, Windows standard applications. It can not support Java-based Web pages.

• need instruction to use the fingerprint reader

  Hello, my name is Thien, call me MT

  I have a problem with my laptop, actually whith my laptop fingerprint reader.
  For these last days, Mc McAfee internet lifesafe secuity continually to make me buy something to protect my PC because it ended, but I don't care about this and keep it jump to the day the day. Until yesterday, my fingerprint reader no longer works,... I did not understand how this happends but it passed. So I looked on the internet how to fix it myself, then I tried to update my laptop mode factoy, download Hp simple pass with fingerprints, .pla reader... pla... pla... but evrething are useless. I really need you guys to help me find the solution, or tell me what wrong whith my Hp.
  Thank you. Ah, forgive me for any error whith my word. English is not my mother tongue ^^

  These should help:

  http://support.HP.com/us-en/document/c03718240

  and

  http://support.HP.com/us-en/document/c03653209

• Cannot use the fingerprint reader to connect to windows 7 64

  I have registered my fingerprint in HP simplepass and for a while, Windows 7 64 was happy to let me sign in using my fingerprint.  Some microsoft later updates and I just don't you the ability to slide my finger print more and need to type my password.  Why is happening.  I checked all my settings and everything is as it should be.  As I said it worked fine on the first so I know my settings are correct.

  Most often when a device is not it's because of a driver.  Try reinstalling your.

  It works for win 7 & 8

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Compaq nc6400 upgraded xp to win 7 can not get the fingerprint reader to work

  I have upgraded xp to win 7, as we will have to do, but can't get the fingerprint reader to work. It appears in the devices that there is one on the machine. I downloaded the drivers for Vista, but they got nowhere.  Read in many places as Vista drivers will work but I seem to need more than that. Any clue?  Thank you!!!

  Hello:

  Yes, for Vista fingerprint reader driver is the only one available, but you must install the software HP protect Manager security tools for Windows 7 from the model which succeeded the nc6400, who was the 6910p.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3357378&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_77198_1%257CswEnvOID%253D4053%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  You must also use the W7 driver quick launch buttons.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3357378&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_78740_1%257CswEnvOID%253D4053%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  If your computer laptop bluetooth, you need the W7 bluetooth software and driver...

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3357378&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_76382_1%257CswEnvOID%253D4053%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  And you can use the version of W7 HP wireless assistant software.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3357378&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_76368_1%257CswEnvOID%253D4053%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  You can also read the manual tools security protect manager, so you can understand how to use the fingerprint reader.

  http://h20566.www2.hp.com/portal/site/hpsc/template.BINARYPORTLET/public/kb/docDisplay/resource.process/?spf_p.tpst=kbDocDisplay_ws_BI&spf_p.rid_kbDocDisplay=docDisplayResURL&javax.portlet.begCacheTok=com.vignette.cachetoken&spf_p.rst_kbDocDisplay=wsrp-resourceState%3DdocId%253Demr_na-c00881344-7%257CdocLocale%253Den_US&javax.portlet.endCacheTok=com.vignette.cachetoken

• Windows Sign-on does not accept the fingerprint reader

  I have a Lenovo ThinkPad W510 running Windows 7 Professional 64 bit.  It comes with the Lenovo Fingerprint Reader software, and I activated it and registered fingerprints.  When I lock the computer, I am able to use the instead of the password fingerprint reader to log on.  Also, when I put the computer into standby mode, I am also able to open a session with the fingerprint reader.  However, when I first turn on the computer, the windows logon screen does not allow me to use the fingerprint reader, but only accepts a password.  No idea what could be wrong?

  The problem is resolved. It was a misunderstanding on my part. By clicking on the "Change user" button, I could see the scanner as a connection option. Once I used once the fingerprint reader, which then became the default user and now presents itself whenever I connect. If I want to return to the use of the password, I can do so using the button 'change user '.

• How can I disable the fingerprint reader? I use an HP Envy 15-k064nd laptop.

  Nice day

  I just bought and Im the proud owner of a HP Envy 15-k064nd laptop.

  I would like to disable the fingerprint reader, because he keeps asking codes while I type on the keyboard. Could you please help me telling me how I can disable the fingerprint reader please?

  Thank you

  Anne-Els

  Please follow the steps as indicated below to solve the problem

  Disable the biometric identifiers:

  Delete the biometric login option:

  Control Panel > biometric devices > change biometric parameters

  Uncheck the BOX "Allow users to log on to Windows using their fingerprints"

  Save the changes.

  To remove the biometrics data for all users, click the option button (round) "off biometrics.

  Clear validity sensor driver:

  Validity sensor driver controls the fingerprinter material.

  SimplePass software manages the password database.

  You can disable the device.  The fingerprinter work not long until the device remains disabled.

  Control Panel > Device Manager > biometric devices > right-click on Validity Sensor > disable

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• How to use the fingerprint for the newspaper on.nnneed reader software win7

  What should I do to get my player fringer Siu

  ThinkPad T1500

  Make sure that the correct driver and software for the fingerprint reader is installed from the manufacturer of the computer.

  http://support.Lenovo.com/en_US/downloads/default.page?selector=expand

• Re: Tecra Z40, Win 8.1 - malfunction of the fingerprint reader

  DESCRIPTION OF THE PROBLEM:

  My Tecra Z40 arrived with Win 8.1.
  From the beginning I couldn't use the fingerprint utility.
  When you access the utility won't happen for a while and then the error: "Could not connect to the fingerprint reader" has finally popped up.

  I could also not use the actual construction of fingerprints 8.1 Win (error: this device has biometric devices is not suitable). (PS mind that this built in function is now integrated into the subway and no device biometric parameters are not now present in the control panel to 8.1 win!)

  The problem has persisted despite the last fingerprint utility (which comes with the drivers) have been installed to win 8.1. 64-bit directly from the website of TOSHIBA and despite that a biometric device was still present in the Task Manager ("this device is working properly").

  SOLUTION:

  After literally weeks of research (including getting help from the shop and service Toshiba), I could finally solve the problem.

  I uninstalled the driver and the reader of fingerprints from the Device Manager (then only fingerprint reader drivers really disappear).
  Then I cleaned the registry (I used CC cleaner software) (or install new wasn't a reason any).

  Finally, I installed a Fingerprint Utility equivalent and the driver for Tecra Z50 (fp - sw - 20140605164020.zip) (which I expect to be using the exact same sensor)... and since then everything works fine.

  I can now access the utility of fingerprinting and fingerprint log on in Windows.

  SUGGESTION OF CORRECTIVE MEASURES:

  It seems the driver on Toshiba support website (I think for me it was the Poles) for my exact machine (made by TOSHIBA - detector.exe) is incorrect.
  To make matters worse the driver does not communicate useful information on his miss - fit in the Task Manager! If I had to recalculate, in money, as long as I have and a whole lot of support persons had spent on it, there really meaning to improve this list of drivers!

  (PS: one of the files in the same directory online regpatch has a virus (VIRUS A Yes) it has been recognized by Antivir!) -Toshiba, you can communicate with someone responsible for the Polish support site!)

  OUTSTANDING ISSUES:

  No fingerprints, login is possible in Mozilla or Internet Explorer despite the appropriate plugins have been installed as well as the utility of fingerprints, where the web password option has been activated. (no suggestion seems to appear to reach the service fingerprints for the sites that require passwords, maybe that your service gets blocked by popup blocking browser protection?).

  I'm really looking forward to this feature.
  Make sure that the plugins work correctly with the latest browsers.

  Greetings

  Hey thanks for this interesting thread and a detailed description.