Configuring simple doesn´t work! (Wi - Fi)

Similar Questions

• Tecra R10 - 10W PCI configuration simple controller-Wireless manager

  I have a Toshiba Tecra R10 - 10W. I installed win7 and in Device Manager, it cannot find the driver for "PCI configuration simple controller.

  Also when I try to use the Wireless Manager Toshiba for 3 g it is said that the radio is off, but in reality the trigger and the WiFi works.

  Perhaps these two errors are connected.

  Thank you

  Hello

  I think you need the driver Intel AMT controller (Intel Active Management Technology).

  As far as I know, you can download this driver Toshiba driver European page or the page of the Intel driver.
  In this case, you will need to search for Intel Management Engine Interface driver

  > Also when I try to use the Wireless Manager Toshiba for 3 g it is said that the radio is off, but in reality the trigger and the WiFi works.

  WLan is not 3G use Fn + F8 to toggle the WiFi, Bluetooth and 3G.
  I think you have to press this combination of button several times to get the right setting

  Welcome them

• Qosmio F30 doesn't work anymore - white screen

  Good evening.

  I seriously need help with a problem with my qosmio F30.
  For some unforeseen reason, he decided to stop working and I am struggling to think of any reason why.

  He is able to enter the laptop itself and when you press the power button the surrounding blue light also, however, that's all, that's all that happens. The cooling fan comes after 30 seconds as planned, but the lights on the front do not indicate the hard drive, kicking in, or actually the any lights on the front, other than the power.

  All I get is a blank black screen. I use my neighbors pc right now which is annoying and I could seriously do with a Board of experts on ho to fix this problem because it is now out of its warranty

  Kind regards

  Hello!

  Just a simple question: you see an image on the monitor of extenral? I ask this question because theoretically the internal monitor may be defective.

  If the outside monitor doesn t work too I think that it s that a hardware malfunction and you should go to an authorized service provider. Technicians can check the laptop's motherboard or the CPU may be defective.
  Here, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good bye

• LAN and WLan doesn't work on Satellite L40 - 18W

  Hi all

  I have TOSHIBA Satellite L40 - 18W and my 1 - wireless problem not knitting & wired lan does not work.
  I download driver and everything is ok, but it doesn't work (when I search by wireless I can't find any network.) My router works fine)

  Please help me

  Hello

  It is difficult to understand what you mean by not working do not.
  Does that mean exactly?
  You are not able to connect to the internet or what?

  Usually, if the wireless network card and LAN card have been properly recognized in Device Manager, then the drivers are working properly and the problem could be related to the router configuration bad or maybe some active firewall, etc.

  First I recommend that you check the router settings. Check if the router has been configured with the right data from ISP and if all other options have been properly set.

  The laptop supports the Realtek Wlan and LAN card.
  Check if the wireless card uses the same standard WLan as the WLan router and if the right encryption has been used too.

• touchpad doesn't work on my laptop. I can't find that everything about the touch pad in Control Panel. can you help me please?

  touchpad doesn't work on my laptop.   I can't find that everything about the touch pad in Control Panel.  can you help me please?

  Hello

  It's material is not a Windows problems.

  / Settings (BIOS/CMOS) often F2 as you start then look at the screen - make sure that is it
  is a toggle the TouchPad that it is enabled.

  Check with support of the manufacturer system, documentation online or forums that there is probably
  Shortcut keys that enable and disable the touchpad functions.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad
  entries) and some have a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary and the TouchPad makes its appearance in Device Manager: (make sure that you have restarted at least
  only once if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  ==========================================

  This utility also allows to control the TouchPad:

  TouchFreeze
  http://code.Google.com/p/TouchFreeze/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Interpolation: copy / paste doesn't work is not on a particular Tween properties

  Hello

  I do very simple tweens with 'new' (non-conventional) method.

  I want the object to move only after a while so I'll try to reproduce the starting position to a keyframe later but, for some reason, it doesn't work on my project while working on a test file.

  I have copy and paste properties of the first image to another key image, but it is not applied at all.

  1 = the starting position

  2 = keyframe with properties stuck but the position is still the same (between 1 and 3)

  3 = end position

  Any reason why it wouldn't work. Thank you.

  Solved!

  I added some ease before trying to move keyframes and this is why it does not work.

  Thanks for your tip Kglad!

• ADF simple security App works not

  I created a simple application to try to get a simple security scenario works, but I'm either missing something or there is a security bug.
  
  In my application, I have a user (user/password), an application role (BasicUserRole) and a page/taskflow (main page). I put in security as a result of the tutorial below. When I run the app, I am prompted with browser authentication dialog box. I enter the credentials (username/password), but authentication fails and I get redirected to the page "error 401 - Unathorized."
  
  I have attached my simple application. If please take and look and let me know if I did something wrong or if I hit a bug.
  
  Thank you
  Mike
  
  My sample application
  http://www.4shared.com/file/119388127/446c7d88/TestSecurity.html
  
  Tutorial that I'm following
  I'm looking at the section "Configure ADF security and create a user"
  http://www.Oracle.com/technology/products/jdev/11/cuecards111/adf_set_18/ccset18_ALL.html

  Hmm I downloaded your app and changed the password of your user named user account and ran the app and the page came fine. I used the user/eu1

• bought iphone7 pluse Qatar facetime doesn't work for the sim card of the India

  Hello Sir,

  I bought iphone7 pluse in qatar that the facetime doesn't work for the sim card of the India. and also before 2 years I bought the iphone 6, as well as in the same countries qatar, but that works perfectly and facetime works for me. the difference what I unbox my 6plus in indai, I unbox my 7plus in qatar and I put the sim card of sri lanka first and tried to India sim then and facetime disappear from the home screen. at the point where I insert my card sim of qatar is worrking. Please I need help. If I buy another piece of 7plus and bring it in sri lanka or India my facetime work? or what? I'm totally confused plese answer me as fast as you can

  FaceTime is forbidden by the law in Saudi Arabia and the UNITED Arab Emirates and is removed from iPhones sold in other countries of the Middle East, if they are used outside the country where they were originally sold. If you plan to use an iPhone outside the Middle East, then don't buy it in the Middle East. The one you bought there FaceTime was illegally imported from another region and sold it.

• Since macos sierra my isight FireWire doesn´t work with Facetime

  Until El Capitan works my FireWire iSight without problem with Facetime. After the upgrade to sierra, my iSight FireWire doesn´t work with Facetime, only with Photobooth!

  Fact the iSight camera please about this Mac-> System Report-> Firewire? What is the year/model of your Mac?

• WiFi doesn't work do not

  A year and half ago we bought a new Mac and the Time Capsule (TC) to go with it. I tried to set up at the start and think about this topic, I do not think that it has never worked properly. I say this because we got a new modem without router because time Capsule has an inside, and we are unable to connect to wifi. I have a TB Ethernet connection and if I can get online in this way, but the WiFi does not work. Last night, I went through and set up and the WiFi worked, but today it no longer works and I can't seem to do it again.

  The indication of WiFi signal says I'm connected, on my Mac and on our phones, but when you disconnect from data it no longer works. It's very frustrating because I don't want to have to go back to a modem/router of the rental of our cable company.

  We have just upgraded to OS X El Capitan 10.11.6

  When it worked last night I created everything from scratch. But I do not think that I would have to do every time I need to use the internet. I also tried to create a WiFi with a custom DNS but that doesn't work anymore.

  Any help would be appreciated.

  Thank you.

  Amazing!

  I am so embarrassed but understand that I would update in the case where everyone does the same thing.

  When I put in 1.5 years ago I went from ethernet cables. The Ethernet cable from the modem was connected to the LAN port and the Ethernet cable from the Mac was connected to the WAN. Once I put the cable from the modem to the WAN everything has worked.

  Sometimes, just come back to square one.

• with firefox 43 yahoo and yahoo mail doesn't work does not correctly

  With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

  I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

  Thanks for the help!

• Mailto doesn't work after updating FF 42.0

  Mailto doesn't work after my last update. The entrance of mailto is not under Tools > Applications and there is no drop-down list to add an entry. My default e-mail program is Windows Live mail.

  Hmm, mailto certainly should not be missed.

  Sometimes, the file that stores these actions of the Manager/download application is damaged. As it is difficult to change, when there is a problem, we offer usually when you rename the file and allows Firefox to rebuild the Windows registry. Who cannot help if mailto is missing from the registry, but I think it's worth a try:

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Break while Firefox finishing his cleaning, then rename the mimeTypes.rdf to mimeTypes.old (or another name of your choice, in the case where you decide to roll back this experience).

  Launch Firefox back up again and return to the Options page to specify your preference. Mailto appears once more?

• I can't update itunes. then my iphone doesn´t work on this computer.

  I have an iMac 9.1 10.5.8, 2.66 GHz processor and 2 GB of memory. He already has snow leopard, but I can't update to other software and I can not update itunes. then my iphone doesn´t work on this computer. What is the latest software that it supports and what are the steps to update the software and itunes?

  < re-titled by host >

  This machine can run the latest version of Mac OS X (10.11). You cannot update directly from 10.5, however. If you have already upgraded to Snow Leopard and have used the software update to get updated (10.6.8), then you should be able to install El Capitan from the Mac App store if you have enough disk space.

  It would be wise to upgrade the RAM of your machine before attempting it, however, that 2 GB is barely enough to run the OS, never mind all the applications.

  This machine can be maxed out at 8 GB of RAM.

• Why transfer doesn't work?

  Hey, guys! Hoping someone here can help me. I am the proud owner of a Macbook (early 2015) of the retina, and I love it. I want to say that it was no problem, but I Can not - transfer does not work!

  I logged in iCloud by using the same Apple ID on my iPhone (iPhone 6 s, iOS 9.3.3) and when I log in Messages on my Mac, I keep seeing in the left panel under 'Preferences' that my account is inactive. Whenever I try to send a message to someone, the name comes in red and I'm invited to sign it - except when I hit the sign in button, I'm actually still signed in and the account is activated! I take a glance settings iMessage on my iPhone and noticed that there is no option for transmission of Message text, so it was not possible to activate this feature.

  I called Apple Support and they also found it strange that he did not work, they find more strange was that "I had all the ingredients, but it does not work" - which means, I am connected with the same ID, my number appears in the preferences of Message on my Mac, I signed with my identifier Apple to use iMessage on my iPhone... it's weird. The next day, I noticed that some aspects of the transfer procedure worked.

  Every time I open Safari on my iPhone, it appears in the Dock on my Mac and vice versa. It goes the same for mail. I also noticed under "phone settings" on my iPhone, I had the opportunity to receive calls on my devices to iCloud, which listed my Macbook. I thought: 'very well! an improvement! "Later, I invited to enter a PIN code of my Mac on my iPhone and voila! Transfer text messages was there, I entered the code and then prayed. Back to the start box, Messages on my Mac refused to work. I kept getting the same problem as above. I must point out that Safari, Mail and phone were still working through transfer.

  Today, I noticed nothing work - no mail, no phone and no Safari by transfer. The option to respond to calls on other iCloud devices have also disappeared.

  When I contacted Apple, I was put with a counselor... but I have not heard yet return. He was also puzzled over there (but very useful). The impression I get from Apple, this is a problem at the level of the device. I'm not so convinced, I'm thinking it was to do with my account on the end of Apple (perhaps the Server/service level?). To my knowledge, Apple Support and specialist have not looked into this.

  Here is what I tried:

  1. Turning iMessage/Facetime on my iPhone on and outside.
  2. Signature on my Apple ID for iMessage and Facetime and then signing back in.
  3. Disconnection and signature in Messages and Facetime on my mac.
  4. Signing in and out of the iCloud on my iPhone and Mac.
  5. Restart both devices when they are disconnected from the internet.
  6. Tried the signature using the App password. (did not work)
  7. Off the two-step verification. (that is, one more time)
  8. Signature on all of my Apple ID account by using only my email domain iCloud.
  9. IPhone restored like new.
  10. Recovery of the Internet on Macbook.
  11. Checked my iPhone automatically sets the time zone.
  12. To ensure that the region iMessage/Facetime and iPhone/Mac were the same (United States)
      1. I must emphasize that the region of my ID Apple is set to Barbados (where I'm from) so that I can use my local iTunes/App Store purchases credit card but I don't see how or even why it would affect the transfer procedure
  13. At the request of the Senior Adviser, I called my provider wireless (flow Barbados) to understand if they support the text Message Forwarding (they didn't know what I was talking about, first, that they said no encryption, it wasn't like call forwarding, and then when I explained to them, they said they were not sure and contact Apple even once).
  14. I don't know if this has nothing to do with it, but I find my iPhone refuses to connect to my MacBook via bluetooth after mating, my MacBook would say connected and my iPhone say not connected, and finally he would be dismissed. But sometimes it does not work when I use the Handoff... weird apps. Also, I can't seem to get AirDrop works, does not detect my devices between them. Just said that I would mention this in case it helps.

  Honestly, this has me has raged for a few days now and I'm really at a loss as to what I should do.

  Any ideas or suggestions? Whatever that either would be appreciated.

  UPDATE: transfer of telephone, Mail and Safari doesn't work again... still no luck with Messages.

  I have a few updates with screenshots, hope they help.

  So, I get this message when I connect using the same Apple ID on iMessage on my iPhone and iCloud/Messages on my Mac.

  

  When I signed, what happened. I was able to sign properly.

  

  As you can see here, my ID Apple is connected and my number is recognized. Note, it continues to tell me that iMessage inactive (red underlined).

  

  When I try to send a message to myself (even with other known users iMessage), this is what is happening.

  

  For some reason, the recipient turns into this red box, where is my Apple ID is the box and I am being asked to activate my account of iMessage. When I click the activate option, I see that I am connected and the ID is activated.

  This continues to baffle me.

• When I'm on a Youtube video that is running and I want to move to a different tab, Ctrl + &lt; number of tab &gt; doesn't work, is this intended functionality?

  When I'm on a Youtube video that is running and I want to move to a different tab, Ctrl + < number of tab > doesn't work, is this intended functionality?

  This can happen when the video player (Flash plugin) has focus.
  In this case the plugin consumes all key presses.
  You will need to click with the mouse on the page or in the UI to work keyboard shortcuts.