Monitor does not not on Satellite Pro L10

Similar Questions

• Satellite Pro L10 does not illuminate

  I have a Satellite Pro L10 and it stopped working yesterday. It won't turn on or charge up. No show of lights on the laptop when the charger is connected. I plugged in another toshiba charger but still no luck.

  Does anyone have ideas on what could be the problem with it and if it is easily resolved. The laptop is about 2 years old. Thanks for your help

  Hello

  Seems not beautiful it is maybe something wrong with the electronic power on the card mother s in this case the motherboard must be replaced to solve this problem

  But maybe you are a lucky guy and only the power adapter malfunctioning Yes, I know that you have tested the laptop with another power adapter, but are you sure that the second captain is supported?

  Anyway, in my opinion, nobody here can provide a solution exactly because without diagnostic tests we don t know what could be wrong
  This is why I recommend to contact the technician of the ASP for a help

• Satellite Pro L10 - recovery does not work

  I am currently that use the recovery cd of the product on my satellite pro L10, however when I am with regard to the selection of recover whole hard disk (option 1) then continue and then the following message appears on a black screen:

  For a drive partition error checking - please try again!
  Press a key to continue...

  When you press a key, then I get another white screen like this:

  X:\ >

  X:\ >

  I have no idea what to do about it, or even if it is indeed a problem, any help or advice would be greatly appreciated, thanks

  Hello

  Please format the HARD drive again and remove all partitions on the HARD drive.
  Several months ago, my recovery CD did not work. But after formatting HDD, I was able to perform the installation of the Toshiba Recovery CD.

• Satellite Pro L10: sound card does not support Windows 7

  Hello

  I have a Satellite Pro L10 so I installed Windows 7 on my system, but my laptop cannot support Windows 7.
  I need sound card for Windows 7 update.

  The model of car audio is Conexant CX20468-31 AC97 Audio sound card.

  Please help me

  Hey Buddy

  What to say first of all that you will get not the official drivers for this laptop for Windows 7 or Vista.
  This laptop is oldie and I doubt that pilots will be released.

  By reading this forum threads I've noticed that most of the user using the driver on Win 7 OS Vista.
  Maybe you should google for Conexant AC97 Vista driver and should try a Vista on Windows 7 driver

  Good luck

• Satellite Pro L10-103 - USB ports not working not

  Hi, my Satellite Pro L10 - 103 USB Ports do not work. I tried different things and finally my Advisor rubbed my computer clean of all programs and operating system. After reloading of the set up disc and having lost my dear some programs I am no further forward. It still does not.

  Anyone know if this means that it is a mechanical problem with the computer? (I use Windows XP). Your help would be greatly appreciated.

  Hey Buddy,

  As wrote Akuma did you use the Toshiba Recovery disk or the Microsoft Windows disk?

  After installing XP, make sure that Service Pack 3 is installed. It contains important updates and can be downloaded on the official page of Toshiba.

  In addition, try to remove all the USB ports on the Device Manager, restart the computer. Ports will still be recognized and ready to use once.

• Satellite Pro L10 will not start the system

  Hello!

  I have a Toshiba Satellite Pro L10, which won't work for some reason any.

  The last time that I used it, it worked perfectly fine, but now all I get is a black filtered message on "windows starts do not successfully»

  It indicates that the computer is not responding and asked me to choose one of the five options - safe mode, safe mode with network, security mode command, last known configuration, prompt or start windows normally.

  There is also a 30 second countdown if I do nothing the portable samekh automatically.
  It is, none of these things work.

  Everything that happens with any option is to a thought very much time on things, then it goes to a black screen with a time/processing bar downstairs, then when that ends it turns itself off, samekh, mw windows page shows (with f2 and f4/f10? options) and the process is repeated.

  He did about 50 times now and still nothing.
  I tried the command ctrl/alt/del, I tried to turn if off and try again, I even opened the f options but I don't know enough about computers to do more.

  Help, please!

  If possible I would like to get the computer on long enough to verify what documents I have on this subject before I can back up (if necessary) and restore it to the factory settings (as I predicted), or if this is not possible, I do not think that there is a lot to lose in this respect in any case, am prepared to take it all back to factory if necessary. I have all necessary installation CD and manuals to go with.

  hope this makes sense and I gave you all you need to know.

  Thanks, B

  It seems that the laptop is not able to boot the system, but I m not quite sure if it s because of the defective system or HARD drive corruption.
  If it s just a system problem, the installation of the new Windows operating system should help you to get it resolved.

  In case the HARD disk is defective, you need to replace the HARD drive and reinstall the system.

• Satellite Pro L10: Recovery disk is not available

  HELO,
  I lost my disc of recovery for Toshiba Satellite Pro L10.
  Service in Poland say my only: Toshiba do not have this disc now.
  am I to do now?

  I need to reinstall my system.

  Model number PSL15E-00x009PL, serial number 55016672W

  Sorry, my English is bad.

  Krzysiek

  Hello

  It s very strange because this device is not very old, and as far as I know you can order all recover cd. Toshiba should always have a copy of the CD or DVD. I can t believe that it s is not possible.
  I would recommend asking EPA again or to call other ASP in Poland.

  The second possibility is to install the OS from the Microsoft CD-ROM, and then install the drivers set and tools of Toshiba.
  Such Toshiba things you will find on the page of the Toshiba driver.

• Satellite Pro L10 battery did not reach full charge

  On my Satellite Pro L10 battery only reaches 85% charge if leave all night. Is this likely to be a problem with the supply power, circuits inside the computer or charge the battery?

  I need to know the best place to start to spend money!

  Some experience that may or may not apply to:
  -Battery system is around 2.5 years
  -The battery lasts about 1 to 1.5 hrs that seems fair considering his age and his level of violence (left connected permanently and not recycled periodically)
  -Very recently would not pass, with or without the power adapter connected. Solved by removing AC, then the battery, running on AC, then turn off and reinsert the battery. Everything now works on battery or AC.
  -Over problem, system has been itself decommissioned at random. Since the resolution of the problem of market it was not randomly turned off itself, YET!

  Any help or advice would be much appreciated. Thank you.

  Chris

  HM, sounds to me like a hardware problem. But the problem is to understand where exactly the error, if you have the following options:

  * Contact a service partner chartered for a hardwarecheckup and an accurate diagnosis of your machine ([http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT])
  * You can buy a new battery (since it could be the battery, I guess)
  * You can sell this machine on ebay and buy a new one :)

  Hope I could give you some new and fresh ideas. There is almost no other options or solutions, the it s so your choice.

  Greetings

• Satellite Pro L10 boot password is not the same as in HWSetup

  I recently got a laptop Toshiba Satellite Pro L10 by my employer. I entered a password and then confirm the password again in the configuration of HW from Toshiba in Control Panel of Windows XP. Then I clicked on the recommended option. No string or password was displayed in the box under Registered.

  Since then, I was not able to boot up the laptop as the password that I entered Setup of HW is not recognized by the laptop started upward. I tried to type the password with caps lock, shift, and numlock on also. Are there any bugs or fault with defining a password for starting in the HW configuration utility? If there is a fault or a bug I would have preferred that the portable computer password is removed under the guarantee.

  If I have to pay a Service partner.

  Hi Geoff

  On this path, it is not easy to tell what's going on exactly, but I assume that your employer has implemented BIOS password. You can enter the BIOS settings by using the F2 key at startup?

  The BIOS password removal is not part of the guarantee and it must be paid. In my opinion, you must bring the laptop to your employer. He probably has Admin rights and it can set up passwords on the right track.

• Can not get my Satellite Pro L10

  I have a satellite pro l10, I tried to put my recovery disk in and she said keeping key c down when I start my computer but it does, nt work, how do I get this drive to work does anyone have an idea, s Please

  Hi James,

  Press and hold the 'C' key is a specific shortcut of Toshiba to allow the laptop to boot directly from the CD. However, you can also select the CD-ROM as boot device in the BIOS, just press the F12 key when you see the Toshiba start screen for power over the process and you will be presented with a menu of the device selection. Tab just down to the CD-ROM and press to enter. The laptop computer should now boot from the CD.

  Kind regards

• HP monitor does not display "DVi signal.

  My HP LP2275w monitor does not display "DVI signal" when connected with a DVI cable (supplied), but when it is connected via a VGA cable and adapter DVI/VGA (both supplied) it works but no BIOS screen. It begins immediately with the logo of the VICTORY.

  I just bought new HP Pavilion 500-158eg, Intel Core i5-4440, with AMD Radeon HD8570, 2GB processor, running on WIN7 Pro 64 b. VGA and another port of the motherboard are initially blocked so I can connect the monitor only via the output HDMI or DVI on the graphics card.

  I should note that on my old machine without a name with the graphic upgrade ATI Radeon, there is no problem and I used the same cable. There was an electric shock that causes the collapse of the motherboard so I can't even re - check on the old machine. I can't verify if there is a problem with the DVI cable because all laptops in our housing have only the VGA output...

  All solutions?

  Concerning

  Disco96, welcome to the forum.

  The specifications for the computer show that they run win 8 64-bit.  Downgrade you for Win 7?

  Here's what the quick reference Guide shows for the monitor:

  Model: (LP2275w) product #: video (KE289A4) standard: (WSXGA +) Native resolution: Aspect ratio (1680 x 1050): (16:10) types of connectors: (DVI - I, (support HDCP) DP) cable/s included: (DVI - D to DVI - D, DVI - I VGA, DP USB,)

  Also, here are the i/o ports of back on the computer:

  Figure 2: Rear i/o ports

• Firefox has only display problems in the upper left region of only my Dell U3011 monitor; the monitor does not have these problems with any other application

  Some parts of the Firefox window are translucent, allowing the image of the desktop to show through. These regions are anything but great internet site central image which behaves normally. Unless the desktop is completely black this problem makes reading the tabs, address bar and the bookmark are difficult if not impossible. I encounter this problem only on my new Dell U3011 monitor. Firefox is the only application that has this issue on the Dell monitor. The monitor built into the laptop that animates the Dell monitor does not exhibit this problem. The laptop is a Lenovo W540 running Windows 7 64-bit. Thank you very much for your help. Steve Schupbach

  Hello stevesch

  first see : problem with Firefox going transparent troubleshoot and find a solution

  then with patience to see:

  questions/940393

  questions/940389

  questions/940374

  questions/940377

  questions/940384

  questions/940395

  Thank you

• F1503 - led blue monitor does not power available. Unable to turn

  Hello

  I had my f1503 monitor into storage for a while and it finally worked its use. Properly connected all power and PC connections and changed the tension but no blue led light work and impossible to turn on the monitor. Checked the power adapter - green led on the power and 12,33 volts transformer showed at the end of the output of the power supply monitor.  The monitor plug was inserted into the grip. Help, please?

  That the monitor has a fuse that needs to be replaced?

  Hello Bruce123456,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are having problems when your flat screen HP Pavilion f1503 monitor does not come. The problem you describe seems to be a physical problem, and I think it would be better if you contact HP Support for service options.

  I want to thank you for display on the HP Forums. Have a great day!

• Primary monitor does not work after last nights updated

  • I'm running Ultimate.
  • I have two monitors.
  • My primary monitor does not work.
  • I checked the VGA cables. This isn't the issue.
  • Edit: Just realized that my main monitor is a monitor "Westinghouse". -Who is a "Plug-in-and-play" monitor, there are no drivers.
  • Reinstalled the ATI drivers, did nothing.
  • SYSTEM RESTORED, still nothing.

  I ran the most recent update for final last night, then fell asleep. Everything worked before that date, but when I went to turn on my computer this morning, only my HP [my second monitor.] w17e worked. He said he was installing updates from last night, so I had no problem with him and thought it might show something once like this on the login screen.

  Once that has happened to the login screen, it showed it for a fraction of a second before disappearing. I entered my password and it connected as usual. After login, I turned off my monitor, and then back on, and it showed my normal desktop for a moment, [enough for me to close two-three programs] before she returned empty.

  Hello
   
  I recommend you to update the graphics drivers and see if it makes a difference. You must be logged on as administrator to perform these steps.
   
  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, locate the graphics card and then double-click the device name.
  3. click Driver tab, then click on set to update driver and follow the instructions.

  Now, try to follow the link provided to update a hardware driver that is not working properly and check the question below.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I also suggest that you please check how to set up two monitors and frequently asked questions on how to set up multiple monitors in Windows 7 from Microsoft mentioned below, items

  ·    Setting up dual monitor is easy in Windows 7 http://support.microsoft.com/kb/976064
   
  ·    Multiple monitors: frequently asked questions http://windows.microsoft.com/en-US/windows-vista/Multiple-monitors-frequently-asked-questions
   
   
  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• PC health check-up according to my monitor does not have the minimum required display settings and change the DPI by default survey

  Original title: DPIdefsault level

  I am trying to install a pc health check-up for my laptop but it says my monitor does not have the minimum required display settings and change the default DPI level.  How do I do that?

  What version of Windows?  You can change the DPI on Windows XP but right click on your desktop, choose Properties, selecting the tab settings, clicking on advanced and change the dropdown to DPI.  Other versions of Windows have similar steps.