Connect my Ohaus Scout Pro scale to Labview without using the continuous setting of the printer

Similar Questions

• OfficeJet Pro 8600 Plus: can not get the printer to function after installing new wireless router

  I recently changed routers from D-Link to a Netgear R6400.  I could get my desk, the laptop and the i - Pad to connect to the new network, but not my HP Officejet Pro 8600 more.  When I try to change the IP address, which is what I think I do, the screen indicates "this feature has been locked by your system administrator or the one who put up the system."  I'm the only one using this printer and I put in place originally, but I do not remember 'locking' anything.  Will you please tell me how to solve this problem, so I can use the printer again.

  Hello

  Thank you for using the HP forum.

  A suggestion that we recommend is to uninstall and reinstall the software FULL of features.

  Alternatively, you can try the doctor print and Scan?

  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

  Hope that helps.

• what I need to connect my macbook to my iMac, so I can use the larger screen

  what I need to connect my macbook to my iMac, so I can use the keyboard and the bigger screen

  What MacBook and iMac what do you have?

  Use your iMac as a display with the target - Apple Support Display Mode

• If I'm going to Win 8 pro. I have to use the stupid face desktop phone or can't I actually run as if it were a real computer (like XP or Win7).

  If I'm going to Win 8 pro. I have to use the stupid face desktop phone or can't I actually run as if it were a real computer (like XP or Win7).

  There are many third-party programs that will probably do what you want:

  http://www.AddictiveTips.com/Windows-tips/best-Windows-8-start-screen-modifiers-start-menu-apps/

• HP officejet pro k550 will not print a test page using the printer buttons.

  How to print a test page to make sure that this printer is still operational?

  I tried all the instructions release possible jams printer, deleted and reinserted the printheads and clean the rollers.  When you press the keys on the front of the printer, it will not print a test page.  and no led error display.

  The printer has been connected to another computer and stopped working last summer.  The printer does not respond to commands from the computer, nor would he respond to the keys on the front of the printer itself.  I can get the printhead to move using the controls on the front of the printer, however.  The printer is not currently connected to any computer and the nearest computer has not installed the appropriate drivers.  Initially the printer is connected to a desktop computer Dell Windows XP (sp 3).

  Here's how to print a self-test of the control panel page.

• How can I connect to Windows XP Pro without using the user name and password?

  I received led optiplex 745 and they all two windows pro installed but I can't open windows pro because I don't have the previous user password.
  How to open windows pro without usin the previous username and password
  Help, please

  Unfortunately, we do not know if you are allowed access to the operating system or someone trying to hack illegally into.

• Satellite Pro A200-16N: can I use the recovery CD after upgrade to Vista

  HII!

  IM thinking of upgrading to windows vista on my Satellite Pro A200-16N and I ran the pre-upgrade of windows vista from microsoft website and it says that my system will be in charge of windows vista so im ok about it.

  The problem is that if my laptop was to break or something like that at some point, will my recovery CD provided by toshiba to work always on the laptop with windows vista?
  They will return the laptop for windows xp or from my laptop has another operating system they will not work?

  Also...
  What's the deal with BIOS? : S
  I don't understand!
  If I were to upgrade to windows vista should I upgrade my BIOS before or after the upgrade to vista?
  As I download the new drivers before upgrading Yes?

  Thank you!

  The restore CD will of course work.
  The recovery CD will always set the laptop back to the factory settings. This means that the whole HARD drive will be formatted and the image of Toshiba will be installed.

  > What's the deal with BIOS? I put t understand!
  > If I were to upgrade to windows vista should I upgrade my BIOS before or after the upgrade to vista?
  To my knowledge, that this laptop was already shipped with Vista, so you need not update the BIOS if you want to reinstall Vista.

  Some series Satellite A200 needs a BIOS update if you want to use the XP.
  In such cases, it s advisable to upgrade the BIOS to version XP first, then install OS X.

  Best regards

• Satellite Pro C870-172: how to use the Fn keys by pressing the FN key

  I recently bought a Satellite Pro C870-172 and I found that the FN key is used by default.

  I mean that if I need to use the normal F1 or F2 key, I have to press "FN" + F1 or F2 etc... otherwise I get the function of toshiba. which would be fine, but in a lot of technical programs, I need to use the normal F1 F2... touch!

  is there a way to reverse the default system so that when I press the F1 key, I get the F1 function and when I press FN + F1, I get the toshiba service?

  Thank you

  M2

  Yes, go to the BIOS by pressing F2
  Now switch to the Advanced tab, and then open the System Configuration.
  Here you will see the option called: mode of the function (without pressing Fn first) key
  This option should be disabled.

• Satellite Pro A300D-131 - how to use the S-Video TV output

  How configure you output to a TV LCD TV S-Video output jack? I tried everything I can think but cannot make it work.

  Hello

  That s easy.
  You must use a 4-pin s-video cable to connect the TV to the laptop.
  Connect both devices, then turn on the laptop, then TV, use the FN + F5 key combination to switch to the external device (TV).

  PS: You have to choose the right channel of TV (s-video must be enabled)

  All that s

• Open built in the workspace Addons in LabVIEW application using the API

  I do Veristand project who uses a lot o custom code for additional features (database Custom logging, several preconfigured stimulus profile running on action of the user, custom logging datafile, customized SCADA-like display of the State of the system (pipes, valves, pumps, etc.)). On any other user of hand interface for the control of the program must be simple, because operators use (the only options, no change in operation) and similar to the previous system solution (which was HMI, touch screen with multiple monitors).

  I plan to do LabVIEW custom application for GUI which communicates with the gateway Veristand and target using API functions.

  However, I want to implement some already existing in the workspace tools in LabVIEW code, such as monitor of the alarm. There are "Open workspace tool" API functions in the labVIEW Veristand API function list. This function requires the toolpath to workspace as an argument. How can I set path for those built in the workspace tools? I'm not managing to find with the simple search.

  You may want to consider this topic

  http://forums.NI.com/T5/NI-VeriStand/open-workspace-tool/m-p/2253154

  Concerning

  -Eric

• LabVIEW: The VI is not executable. Most likely the VI is broken or one of its subVIs is not found. Open the VI in LabVIEW by using the file > > open and make sure it is executable.

  When you try to run a sequence on a deployment computer I get this error. When I pass the adapter in the system of development the problem disappears however I don't have the luxury to keep the full Labview development on the test computer. Is there a fix for this problem and what is the cause of this error. This is the software and versions that I use. It seems that the vi which are broken using Invoke and nodes of property in their breast, I don't know if this is a coincidence. It seems that it is more related to invoke than the property node node. Any help is greatly appreciated. Why is it that everything works fine until you try and deploy it on a test computer. This is not the first time that I had these problems using Software Instruments of the Nation.

  LabVIEW 8.2.1

  TestStand 4.0

  I solved the problem. I had a couple of files with the same name stored in 2 separate places in the 8.2/vi.lib a Labview has been found in vil.lib/printing and the other was found in the vi.lib/addons/vi.lib/printing. I don't know how it has been duplicated, but since I deleted the vi.lib file in the addons directory there are no more problems.

• Automing instruments LabVIEW without using specific and coding drivers for each instrument?

  Hello

  I'm new to programming in labVIEW, but I had a few questions about its use in automation and remote controlling several instruments.

  It is an ideal software for automation of various instruments remote control/test. Assuming that I have several different companies spectrum analyzers, I understand that labVIEW drivers of instruments or special VI who would control these instruments. But if I wanted that all these spectrum analyzers to say, to display on another computer using the remote control, but I wanted to use the same program for effeciency, is it possible to do so universally for all instruments using labVIEW? Or do I have to adapt this program for each instrument to instrument drivers cause?

  If labVIEW can do that, is - anyone had good success for such scenarios in other programming languages?

  Thanks in advance for your help.

  Look for the Abstraction Layer material (that you can implement with LabVIEW, even if it's a slightly advanced topic).

  The idea of having a specific Test and be able to enforce it against different Instruments, decided at run time, is the kind of situation that LabVIEW and use of HALs was designed to facilitate.

  The concept is to 'Levels of Abstraction'.  When you create a test, you can design it for an abstract Framistan, since all the Framistans are supposed to be able to measure Vorbels in the range of 0 to 100, so you just plug a generator of Vorbel to generate Vorbels in a certain sequence of Test (linear, random, quickly, slowly, pulsatile, continuous, you decide), measure your Abstract Framistan records readings and compare with the results you expect write the results in a nice report.

  Of course, Framistat of OR uses Ethernet as the means of communication, while HP uses a serial port (depending on the model, series settings can change) and uses of the Intel one. DLL to communicate with the low-level API.  So you also need to develop, for each specific instrument, an "interface" between its API and the Framistan abstract (not everyone uses Vorbels as the input unit, for example).

  So the good news is that it can be done, the bad news is that one of the best ways of handling this type of question on the programming is to use OOP (OOP).  A number of languages (LabVIEW, C++, JAVA) support OOP, but LabVIEW might have the advantage when it comes to interact with the material.

  I you are looking for Hardware Abstraction Layer?  Add LabVIEW to the search query and you should find some nice presentations by Elijah Kerry...

  Bob Schor

• OfficeJet Pro 8600 Plus N911G: Cannot use the Scan to PC, option on my printer

  I recently updated from Windows 8.1 for Windows 10 and had to reinstall my printer drivers and software.  Since doing so, the office of my printer scanning function did not work.

  When I use the option on the printer, I get the message that no computer I'm done to open the HP printing software, select the scanner actions and select manage the scan of the computer.  The only thing is that twhen, I go to the HP folder in my Start menu, there is no installed printer HP software.

  I went to the page support and download the complete software solution for my printer and ran the installation, but I still do not have anything that will allow me to select the actions of scanner, and then select manage the scan of the computer.

  I even tried to use HP Print and scan v4.7 doctor.  He said full software solution is not installed on my computer and it gives me a button to click to download the software, and it is said that it downloads all the 123 file meg, then it gives me an error download failed message and offers try again immediately, but it fails every time.

  My printer is connected to my PC via my WIFI router.

  Hey there,
  Try the next step, I believe that this will help you overcome the problem.
  1. remove the printer driver of "devices and printer" which is located in Control Panel.
  2 Download this file (http://ftp.hp.com/pub/softlib/software12/COL40120/bi-108858-4/OJ8600_1315-1.exe), which is the solution full HP JO 8600 series.
  3. extract the contents of the file.
  4. open the "Utils" folder and choose the folder 'x 64', inside you should be able to locate a file called "RemovePreInstalledDrivers" > once you open this file black screen opens, wait for it to close, then move to the next step.
  5. go to the main folder where you have already extracted the software and right click on the file x 64.msi (name is most likely your printer model), then choose the Option "repair". > Subsequently, you will be asked of preformed a reboot. (Incase you will get a Messege saying "this action is only valid for products that are currently installed" simply double-click the file instead)
  6. after the restart, the head disk Local C/ProgramFiles/HP/PrinterModelFolder/bin/USBSetupLuncher and double click it.
  7 start the installation, choose the wireless option.

  Who should add the scanner to your imaging devices.
  Best Of luck ~

• HP Officejet Pro X476dw. Message: problem with the printer or ink system. 0xc6fd0213 error code

  HP Officejet Pro X476dw purchased June 2013.  Windows xp operating system.

  Printer does not.  In a "print order" function, by modem or button copy to printer, gives me the error message: the printer failed.  There is a problem with the printer or the ink system.  0xc6fd0213 error code.

  Sometimes spits out a blank sheet of paper.

  Hi people, as @Bryan_P has said - Please contact the HP support by phone on this error message. The below listed phone numbers...

  http://welcome.HP.com/country/us/en/wwcontact_us.html

  Can you please post back to let us know how you go?

  Thanks, Ciara

• HP Officejet Pro 8610: Unclear Instructions online, using the phone fax configuration, how to print envelopes

  Terminology used in the instructions I'm not familiar with.

  Hi @chazz85,

  I'd be more than happy to help you with your configuration envelopes and printing of fax.

  Are there specific terminology that you want me to explain?

  Let's start with the implementation of the fax machine.

  The best market-well because it is in this document to set up a new Fax.

  For me to simplify this configuration for you, I would need to learn more about the installation of your home Tel/fax line.

  • Is he a dedicated phone line? Only used for faxing.
  • Or is it a shared phone line? Phone and Fax.
  • Is your analog phone provider (typical telephone lines) or digital? (Cable connection)

  If the row is shared;

  • You have the distinctive ring service? 2 numbers, same phone line that present different ringtone profiles to indicate the type of incoming call
  • You have an answering machine? An answering voice calls in the same phone number you use for fax calls.
  • You have voicemail? A subscription to voicemail service using the same phone number as the fax.

  The (Simplified) recommended configuration would be;

  1. Telephone jack in the wall (RJ11) connected to line 1 on the printer using the cable provided in the box with the printer

     Then, if any;

  2. Port 2 - EXT on the back of the printer connected to the answering machine (using a phone cable)
  3. Your phone will then connect on the answering machine (once again using any phone cable)

  Once I have more information about your setup I can help you further.

  Now for printing the envelope.

  I recommend the user to the 8610 Guide to show you how to correctly load an envelope. I copied the steps here for you;

  NOTE: If your printer has a second tray (tray 2), do not insert the envelopes for printing in this slot.

  1. remove the main input tray. Remove all existing paper from the tray.

  

  2. Insert the envelopes facing print down and charge according to the chart. Make sure that the stack of envelopes does not exceed the lower line of the marking in the status bar. For more information, see the diagram engraved in the status bar.

  

  NOTE: Do not load envelopes while the printer prints.

  3. slide the paper width guides in the tray until they touch the edge of the stack of envelopes, then re-insert the tray.

  

  4. remove the output tray extension until the planned paper size is reached.

  

  I need to know what program you are trying to print from. If it's Microsoft Word, I find this document print an envelope very useful.

  If it's another program, you can try the manual suggests.

  1 load the envelopes face to print down in the status bar.

  2. in the menu file in your software, click print.

  3. make sure that your printer is selected.

  4. click on the button that opens the Properties dialog box. Depending on your software application, this button can be called properties, Options, configure the printer, printer, printer or preferences.

  5. Select the appropriate options.

  • Under the layout tab, select Portrait orientation or landscape .
  • On the paper/quality tab, select the paper type appropriate media drop-down list in the area of selection of the status bar, and then select the appropriate, print quality in the quality settings area.
  • Click on the Advanced button in the paper/output box, select the size of paper in the paper size drop-down list.

  6. click OKand then click print or OK in the print dialog box.

  Please let me know if these steps solved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you