Connect the scanner via TimeCapsule

Similar Questions

• Satellite A60 - impossible to connect the camera via firewire (IEEE)

  Hello

  Have problems with the dv camera connection to
  laptop computer via cardbus IEEE (firewire)
  It seems to be connected, but none noticed and not take at all.

  I think the problem is with the drivers - but what exactly should I install?

  Thank you

  I don't know which cam you use but when the cam is connected and recognized correctly, it will be listed in the Device Manager. So, do you need some software to have access to the material recorded. By using this software you can record the film on the computers HARD drive.

  Later, you can create DVD or do something else. I have more old digital camcorder tape 8 of 8mm inside. I connect the cam with firewire cable too. When the cam is activated, it is recognized and I can copy films of the tape to the computer s portable HARD drive. For this I use Ulead Movie Maker software.

  What exactly do you do with your cam?

• I have aLEXMARK PRO707, which operats wireless. Wish to connect the scanner to my computer to print and I don't know how to do it. HELP PLEASE

  My computer is an ACER Travelmate 3270.

  The COPIER, LEXMARK PRINTER, SCANNER, COPIER is connected to the computer (wireless).

  Printing is not a problem.

  I would like to connect the LEXMARK to ACER for ANALYSIS and I donot know how to do.

  The LEXMARK is the ACER COMPUTER reading and ask the set up to be.

  Can anyone HELP in this regard.

  Tanks.

  This should help or contact the support technique printer because Microsoft is the manufacturer of your printer.

  http://www.ehow.com/how_5966263_use-Lexmark-ALL_IN_ONE-scanner.html

• Connect the printer via the home router

  I have LaserJet CP1525, who has a wireless option... recently I moved my router on the different floor and can not connect to my my wireless home network option trough ethernet cable/router...tried on the printer, but "failed to connect".

  any ideas? Thank you

  Hi BoleczekNieduzy,

  Welcome to the HP Forums.

  I see that you have any questions, set up the printer on the network cable and even the wireless network.
  I will do my best to help you with this problem.

  Cycle power to the router.

  First, we must restore the defaults on the printer.

  Press the OK button on the printer, go to the service, and then select restore default settings.

  Print a printer configuration page to make sure that the IP address and SSID are erased.

  Print a Configuration report.

  Select the method.

  Uninstall the printer software.
  Insert the software CD into the CD drive.
  Follow the on-screen instructions.

  When you are prompted, select the connection through the wireless network.

  If you're still having problems, restore the default values and follow this method:

  Connect the printer to the router with an Ethernet cable.
  Wait about 1 minute and the printer must have a valid IP address.
  Print the configuration page to get the IP address of the printer.
  Type the IP address in the address bar of Internet Explorer which should open the printer's built-in web services page.
  Installing wireless over here now.
  Click the networking, wireless on the left, fill in information about the network and apply the settings.
  After the confirmation, then disconnect the Ethernet cable.
  Now you should have a flashing light on the printer in 1 minute wireless about.

  Run the installation again.

  I have provided a document to configure the wireless connection, or you can follow my different methods provided.

  Installation of the software of the printer on a wireless network or network (Ethernet) cable.

  If the Wireless does not always connect, to view these settings on the router.

  You have a double router broadband?
  If it is set to 5 GHZ network, you may need to change to 2.4 GHZ. (rename the 5 GHz or turn it off)
  The WPA key setting must be on AES to work properly not TKIP.
  If it is set to the 64-bit encryption, then change it to 128-bit.
  Multi flow must be enabled.
  Router firewall must be open for printer ports.
  If you have Mac filtering give you printer hardware to meet the needs of the configuration page.

  Please let me know if this is not the problem.

  Have a great day.
  Thank you.

• connect the scanner HP scanjet 4200C

  Computer Inspiron laptop Windows 8 will not recognize the HP Scanjet 4200 C. How to solve this? The CD for the scanner software was used when I had Windows 98 2nd edition. Would not work. Plugged into the USB 2 port. Current past, green light showing on scanner. Please advise?

  Your CD will not work in Windows8. Try to go to: http://www8.hp.com/us/en/support-drivers.html . Enter the full name of your printer and download and install the necessary drivers/software for windows 8. Hope this helps and if you need any additional aid station and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe."-John Muir

  "When we try to take anything by itself, we find it hitched to everything else in the universe." -John Muir

• Connect the Scanner for extreme

  Can I connect my Canon Canoscan 9000F scanner USB in the extreme I can print or scan from my MacBookAir via my WiFi?

  Unfortunately, only the print function will work in the USB port on the airport routers... If you have a compatible printer.

  Of the advanced features such as copy, scan, Fax, maintenance, etc. are not supported on routers airport on all-in-One devices or stand alone products.

• Can TV 32DL933B - I connect the SKY via RF?

  If I connect my sky box to a 2nd TV using the rf to TV 32DL933B socket. I can settle in the DTT channels, but I can't get the sky channels.
  Is it a question of connection settings or tv?

  Unless your 'Sky box' has output of the box itself, you will receive the 'TNT' channels despite the box, not because of the box.

  Most of the boxes for reception satellite feed their signal via a HDMI or composite or component video, power supply, which must be selected via the button "entry" on the TV remote control.
  Check your manual for the 'Sky' box to see if it produces a RF signal out, or simply "pass by" the Federation of Russia of the antenna, it should tell you so anyway

  donhe7

• Unable to connect the client via vsphere ESX host

  Dear team,

  Once I tried to connect to client host via vsphere ESX I m getting following error.

  

  VCenter version: 4.1.0 345043

  vSphere client: 4.1.0 345043

  ESX Version: 4.1.0 721871

  You help me on the same request.

  concerning

  Mr. VMware

  It is usually advisable, but not an obligation, to have the build of your version of vCenter client correspondence.

  You can see the Interopabilty matrix for supported configurations

  http://PartnerWeb.VMware.com/comp_guide2/SIM/interop_matrix.php

• Connect the airport time capsule to telstra NBN

  Grateful for the help with the required parameters to set up my time capsule airport with Telstra NBN via Telstra condition max modem router gateway, I want to use the TC as my router and for backups, I understand that I need to be able to use the TC as a router and connect the TC via an ethernet cable to the gateway I need to put the door in Bridge mode, thanks in advance

  Double post.

• Satellite L650-11F - how to connect to LCD via an HDMI cable?

  Hello world

  I have the Satellite L650-11F with ATI 5650 and HDMI port and I want to connect the laptop via HDMI lcd screen so that I have some office using 2 * ATI Catalyst * and * software HydraVision, but ATI sites said that Toshiba notebook is not supported (Please check with your mobile phone OEM for support of the drivers for these laptops).

  So, how can I connect my laptop to LCD screen to get 2 workstation?

  Sorry for my bad English :)

  Hi thebluewriter,

  I think you need to check only the other discussions of the forum on the connection for laptop LCD screen. You will find enough about it!

  In any case, most recent display driver you can download on the official website of Toshiba, but usually it s preinstalled on your laptop.
  If you are using a HDMI cable, use just FN + F5 key combination to switch between monitors. All that s! :)

• ScanJet N6350 - cannot detect the scanner on our internal network.

  Afternoon,

  Product details:

  ScanJet N6350

  Operating system: Windows XP

  Error: Could not find the network N6350 scanner when you use the HP software.

  Changes: There has been no change to my system.

  Hope someone can help me with this:

  I am trying to add my scanjet N6350 to our corporate network, I have assigned to the internal Ip address bad ETC. and can travel to the scanner internally.

  However, once the installation of the HP software to connect the scanner to my machine, cannot find the scanner on the network.

  Thank - you

  Well, it turns out that:

  Even if it wasn't the error is displayed when you try to connect the scanner, it turns out to be the solution to the problem and I am now able to Scan over the network.

  Before installing the Scanner, follow these steps on the local computer.

  1. Please click Start and select Control Panel.

  2. Click on system and select the Hardware tab.

  3. Click the driver signing, you will be directed to the driver signing options window.

  4. In the window the driver signing options, select the ignore - install the software when even and don't ask for my approval, make this action the system default and click OK.

   

  After these changes, if necessary, reboot the computer so that the changes will take effect, and then try to re - install the scanner software.

• Connecting two routers via a static route

  I have a relatively simple configuration involving a Wireless-N Router and a wireless-B router (several years).  The N wireless router is connected to the internet (via DSL modem) and accepts several DHCP clients without problem.  Wireless - b router is connected to the Wireless-N router.  To do this, I connected the WAN port on the router wireless - b to a port on the router Wireless N ethernet (did not use the uplink). I have a PC connected to the router wireless - b, so I want him to be able to hit the internet, but also be accessible to DHCP clients on the Wireless N router.  The PC connects to the internet successfully, but it does not find clients on the network supported by the Wireless-N router.  It's about my setup:

  B 192.168.55.1 wireless router (LAN) 192.168.56.102 (WAN)

  PC 192.168.55.10 (active dhcp)

  Wireless N 192.168.56.1 (LAN) x.x.x.x (internet)

  (several clients dhcp... 192.168.56.100...)

  I've added a static route in the hope that a computer on the network of the Wireless N router would be able to hit the PC, but nothing helped. I've added a static route as such, on the Wireless-N router, which was the only way that that would enable the web interface:

  Destination LAN 192.168.55.0

  Subnet mask 255.255.255.0

  Gateway 192.168.56.102

  I tried to place the router without wireless - B gateway mode, then router and changed mode, then return.  I can connect to the web interface of the router wireless - b from the PC, and I can connect to the internet from the PC.  Also, the PC is able to reach customers on Wireless N, but the reverse is not true, i.e. clients on Wireless N can't find clients on the wireless - B network. Also, I turned on the port forwarding on the router wireless - B so that it points to the PC, in the hope he would lead all traffic to the PC, but still cannot access PC.  How to configure both routers (or both set up as access point?) so that clients on the Wireless N Router can talk to customers on the wireless router - B?  For now, all customers are on DHCP, but finally, I would like to create static entries for at least two or three of them.

  Thanks in advance

  Are Linksys routers teas? If so what model is router B? It may not supported for a DHCP client port forwarding. Even if you can get the port forwarding to work for a client on router B, it will not work for several clients.

  In addition, if you have the option in router B, disable the SPI Firewall. It is the cause of the problem, in my opinion. If you do this, you should port forward.

  Is there a reason that you connect the routers via the WAN port on the router B? You could uplink using an ethernet port on the B to an ethernet port on the N and avoid all this... You can always configure router B as a point of wireless access for specific customers.

• Windows 8 does not recognize the scanner

  I have two printers on network, a brother MFC9840CDW and a HP Photosmart Premium C410.  Both are multifunction devices and both are recognized by Windows 8 as Printers , but not the scanner. I uninstalled the drivers for the HP and reinstalled the but the scanner is still not recognized.  I can't reinstall the Brother drivers because the brother website says it uses the native player of Windows 8 and therefore does not download.  I have tried both Photoshop and Adobe Acrobat Pro to address scanners and neither of then is recognized by both programs.  Using Windows 7 machines on the same network, however, both are recognized as scanners, so clearly, it's a matter of Windows 8.  In addition, HP and brother have Windows 8 'apps', HP Scan and Capture and Brother Print and Scan, respectively.  The fact HP application recognize the scanner HP; application of brother do not recognize the scanner Brother.  I'm confused and need help!

  Don't forget to directly connect the scanner to the computer of victory 8 to test scan. Scanner-printers on network that are connected to another computer on the network can share the printer but not sharing the scanner. Scanners should be connected directly and use the software on a computer to scan. The exception is a network Wireless scanner-printer connected to the network router.

  Your printer HP scanner will scan with windows 8 if it is attached to the computer in windows 8, since the drivers are available HERE Connect that one to the computer that you use most for scanning and sharing the printer with other computers. And the Brother machine is also compatible with the drivers from This SITE , it is also presented as a printer scanner wireless network that you can connect to your router and share it on the network. Get directions to connect to the router of brother.

• HP officejet Pro 8600 cannot connect to the scanner

  HP Office jetPro 8600 NG11a, Windows 7 OS, connected to the network via an ethernet connection

  I've only had the printer for a few months. Initially, had problems with the network connection that has been resolved by manually inserting the IP address outside the DHCP range.

  I now keep getting a scanner mesagesaying is not available. I try and turn it back on, but it does not work

  I have run the analysis doctor and followed the instructions but it is unable to solve the problem.

  I uninstalled and reinstalled drivers and who does not.

  Here is mention of the IP address, but as I had all the problems before I am reluctant to interfere with the IP that the printer itself is OK.

  Nothing has been changed on my system, I have not actually used the scanner to date but notice all of a sudden the error message on my toolbar and then found that the scanner will not work.

  I would be grateful for any help.

  Much thanks 2DX

  2DX

  Thanks for responding.

  I worked my way through all the suggestions and nothing worked.

  For the moment everything is OK, I've installed a new driver of network and turn on the printer before starting the computer well.

  I cross my fingers, but it is very worrying that I had all these problems of network with a new printer.

  Cordially 2DX

• I connect to the internet via the modem broadband datacard. After 2 minutes, the tab displays like this 'exception unknown software exception (0xc00000fd).

  Svchost.exe - application error

  I use windows xp professional edition. I connect to the internet via the modem broadband datacard. After 2 minutes, the tab displays like this
  "The exception unknown software exception (0xc00000fd) occurred in the application at location 0x5b8787ad.
  Click OK to terminate the program
  Click on CANCEL to debug the program.

  If I clicked on ok and cancel, it disconnects Internet. the message again after the computer restarts and the connection with the internet. and also the internet Explorer does not open I tried several times but it doesn't work. What can I do to slove this problem. Please help me.

  Hello

  ·          When the issue started?

  Step 1: Try to scan the computer using Antivirus software because this problem can occur if the computer is infected with the virus. You can use the Microsoft Security Analyzer by clicking on the link: http://www.microsoft.com/security/scanner/

  Note: once a virus is removed, you will need to reinstall some software, or restore lost information.

  Step 2: Check if the problem persists in Mode without failure.

  A description of the options to start in Windows XP Mode: http://support.microsoft.com/kb/315222