connect the scanner HP scanjet 4200C

Similar Questions

• How to configure a scanner HP scanjet 4200C Vista

  How can I configure a scanner HP scanjet 4200C under vista?

  Hello

  You will not be able to install this Scanner HP scanjet 4200C under Vista.

  Only written HP drivers until and including XP for this model (Windows 95 - Windows XP available drivers)...

  Time for a new Scanner.

  See you soon.

• Scanner HP Scanjet 4200C: cannot upgrade Windows XP to Vista

  After the migration from Windows XP to Windows Vista I can no longer operate my scanner HP Scanjet 4200 C. I installed the original series of scanner HP 4200C software and plugged the scanner via the USB interface. The software starts up, but cannot find the scanner. After reviewing the HP web page I discovered that HP does not provide an upgrade to Vista; the last update they provide is for XP and not Vista-compatible. Everyone had the same problem and found a solution?

  HP has written drivers for their products, not Microsoft.

  If HP has said that there are no Vista drivers for your printer model, it has none.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=60118&LC=en&cc=us&DLC=en&submit.y=6&submit.x=9&lang=en&cc=us

  If it will not work with XP drivers on the link above:

  You will need to consider buying a Vista Compatible Scanner.

  See you soon.

  Mick Murphy - Microsoft partner

• Connect the scanner via TimeCapsule

  I have a Canon LiDE 120 Cancan scanner.  I want to connect to my local network using port USB TimeMachine.  My laser printer works this way, but the utility OS 'Printers and Scanners' preferences won't find the scanner.

  Is it possible a scanner by the TC/airport network for all my computers can "see"?  If so would appreciate any advice on the installation program.

  Note: even if directly connected to a computer the button 'share (printer) on the network' disappears when a scanner is selected.

  Thank you

  Not with a USB scanner. The time Capsule does not support that.

  (144525)

• I have aLEXMARK PRO707, which operats wireless. Wish to connect the scanner to my computer to print and I don't know how to do it. HELP PLEASE

  My computer is an ACER Travelmate 3270.

  The COPIER, LEXMARK PRINTER, SCANNER, COPIER is connected to the computer (wireless).

  Printing is not a problem.

  I would like to connect the LEXMARK to ACER for ANALYSIS and I donot know how to do.

  The LEXMARK is the ACER COMPUTER reading and ask the set up to be.

  Can anyone HELP in this regard.

  Tanks.

  This should help or contact the support technique printer because Microsoft is the manufacturer of your printer.

  http://www.ehow.com/how_5966263_use-Lexmark-ALL_IN_ONE-scanner.html

• Connect the Scanner for extreme

  Can I connect my Canon Canoscan 9000F scanner USB in the extreme I can print or scan from my MacBookAir via my WiFi?

  Unfortunately, only the print function will work in the USB port on the airport routers... If you have a compatible printer.

  Of the advanced features such as copy, scan, Fax, maintenance, etc. are not supported on routers airport on all-in-One devices or stand alone products.

• How to operate the scanner hp scanjet 4400c on windows operating system 7

  How to run the scanjet 4400c operating system windows 7

  The simple answer is that the HP scanjet 4400c scanner is NOT supported with Windows 7 operatingsystem drivers.

  Read the bottom of the page in the link above. It offers links to 3 third-party drivers that can give the features.

• ScanJet N6350 - cannot detect the scanner on our internal network.

  Afternoon,

  Product details:

  ScanJet N6350

  Operating system: Windows XP

  Error: Could not find the network N6350 scanner when you use the HP software.

  Changes: There has been no change to my system.

  Hope someone can help me with this:

  I am trying to add my scanjet N6350 to our corporate network, I have assigned to the internal Ip address bad ETC. and can travel to the scanner internally.

  However, once the installation of the HP software to connect the scanner to my machine, cannot find the scanner on the network.

  Thank - you

  Well, it turns out that:

  Even if it wasn't the error is displayed when you try to connect the scanner, it turns out to be the solution to the problem and I am now able to Scan over the network.

  Before installing the Scanner, follow these steps on the local computer.

  1. Please click Start and select Control Panel.

  2. Click on system and select the Hardware tab.

  3. Click the driver signing, you will be directed to the driver signing options window.

  4. In the window the driver signing options, select the ignore - install the software when even and don't ask for my approval, make this action the system default and click OK.

   

  After these changes, if necessary, reboot the computer so that the changes will take effect, and then try to re - install the scanner software.

• ScanJet G4050: Desktop unable to see the drivers for Scanjet G4050

  I have a ScanJet G4050 that I can't make it work with my desktop computer (HP ENVY 700 - 210xt CTO desktop PC). The Office seems to think that there are no drivers for the device.

  I've recently updated for Windows 10 of 8.1. I had not connected the scanner before update (yes I know) so I honestly do not know if she would have connected before.

  I ran software installation from the disc, and then downloaded and installed software linked from the info Windows 10 on HP website.  Nada.

  My Device Manager Office lists the HP scanner which I assume is due to the installation of the software detects not the scanner because I told

  The drivers for this device are not installed. (Code 28)

  There is no compatible driver for this device.

  Watching the news on the events tab for the device, it is said

  USB\VID_03F0 & PID_4605\CN48JCB18105 device has been migrated.
  
  Device's last Instance Id: USB\VID_03F0 & PID_4605\CN48JCB18105
  The class GUID: {6BDD1FC6-810F-11D0-BEC7-08002BE2092F}
  Path:
  Migration status: 0x0
  Present: false

  I guess ' present: false "means that the device is not seen by Device Manager.

  Just in an act of desperation, I switched the USB cable in case it was bad, nada.

  OK, I'm completely and totally frustrated... and ideas.  If someone can point me in the right direction I would really appreciate it.  Pay $99 for technical support of time on a $180 scanner is not really profitable.

  @ErinContour

  OK, well - the information on the pages of the Web site support has been around since at least 2006 - so if the scanner is not believed, it seems at least some support information has been around for some time.

  I don't have the answer...

  ErinContour wrote:
  

  This scanner is aged a year... so little vintage. I mentioned, I installed the scanner, I installed the complete software off the drive before you download and update the software using the Windows 10 link on the HP site. I have the guide to the user, which in the circumstances is singularly useless.

  Still not clear. I guess I misunderstood - do not remove the existing printer software before installing the replacement defined on HP website.  Assuming you have done this, then 'all good '.

  Maybe it's nothing other than Windows 10 no no not necessary routines in place to support the scanner software.

  User guides vary - most recently, I think the documentation has improved substantually.  Unfortunately, in my opinion, a lot of the old guides (this one circa 2006) are not as including the type of information desired by many users / owners of the devices.  NOTE: This is a personal opinion only; I speak NOT of HP.

  There is a tool that you can try:

  HP Print and Scan Doctor for Windows

  No idea if the doctor will know what is happening.  Although imperfect, it is a good program...

  ----------------------------------------------------------------------

  If the scanner is connected physically and that the computer is aware of this connection and know the type of material, then you might be able to use a software program of scanning solution.

  Options of the digitization program

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Windows 8 does not recognize the scanner

  I have two printers on network, a brother MFC9840CDW and a HP Photosmart Premium C410.  Both are multifunction devices and both are recognized by Windows 8 as Printers , but not the scanner. I uninstalled the drivers for the HP and reinstalled the but the scanner is still not recognized.  I can't reinstall the Brother drivers because the brother website says it uses the native player of Windows 8 and therefore does not download.  I have tried both Photoshop and Adobe Acrobat Pro to address scanners and neither of then is recognized by both programs.  Using Windows 7 machines on the same network, however, both are recognized as scanners, so clearly, it's a matter of Windows 8.  In addition, HP and brother have Windows 8 'apps', HP Scan and Capture and Brother Print and Scan, respectively.  The fact HP application recognize the scanner HP; application of brother do not recognize the scanner Brother.  I'm confused and need help!

  Don't forget to directly connect the scanner to the computer of victory 8 to test scan. Scanner-printers on network that are connected to another computer on the network can share the printer but not sharing the scanner. Scanners should be connected directly and use the software on a computer to scan. The exception is a network Wireless scanner-printer connected to the network router.

  Your printer HP scanner will scan with windows 8 if it is attached to the computer in windows 8, since the drivers are available HERE Connect that one to the computer that you use most for scanning and sharing the printer with other computers. And the Brother machine is also compatible with the drivers from This SITE , it is also presented as a printer scanner wireless network that you can connect to your router and share it on the network. Get directions to connect to the router of brother.

• I was using WIA in Photoshop Elements because of problems with my scanner HP ScanJet sudden 4200C window. With the help of my scanner HP through WIA worked very well. Now I have problems analysis with either WIA or the window of the HP scanner.

  When I finally tried to solve the initial problem scanner HP in resettlement of the disk to scan, I kept getting the message that it was not compatible with Windows 95 or 98. But I have Windows XP.  So I finally downloaded and installed scanner drivers, software and upgrades on HP website. Well, the works of scanner, but now there are new problems.  1 - once the hp scanner window is displayed by clicking on import through Scanner HP, most of the menu at the top of the window items is not available. For example, I go to settings and all that is now available is to scan in color. There are 5 other options I should be able to click on, for example, resolution.  And I need that.  I thought, no problem, I'll just use WIA as before, as well as the WIA window came much faster than the HP one.  Problem 2 - in elements, I can go to WIA, but it says "NO compatible WIA devices have been detected."  That's happened?  I tried to go into Panel, scanners and cameras, add a device... but he could not find the scanner and of course, he cannot read the HP disc because of the inconsistent message of windows 95-98 (on my Windows XP computer!).  Can - I just uninstall my scanner and if I make the WIA will be able to find it after that?  I do not understand how I could use WIA and now I can't.  I know it has something to do with that I downloaded and installed at HP, but what?  I hope someone can help.  I have a huge project that I'm trying.

  Hello Hotrodgrandma,

  Thank you for your message.  It seems that when you have downloaded and installed the driver from the HP website, you cannot have downloaded and installed the updates as well.  Click HERE to open the HP website and download the appropriate files.  Below, I will give an overview of what you need to download and install in order.
  1 ScanJet 4200C/Cse/Cxi PrecisionScan LT software/driver
  2 HP PrecisionScan LT for ScanJet 4200 c Scanner update. This update allows the parser to work under Windows XP.
  3. all three updates, in no particular order.
  Please let us know if this is or is not to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• ScanJet G3110 - 'unable to communicate with the scanner' error message

  This Scanjet has worked well over the years.

  I don't remember making any changes, but now when I click on any option (for example copy or scan to email... all options) I get the error «unable to communicate with scanner» HP

  When I click on "Preferences of the Scanner", the Apple preferences page with a popup that reads:

  To use the "HP Scanjet", preferences preferences pane system must leave and reopen it.

  I click OK and system preferences change to 'Preferences system (32-bit)'

  I click on the HP icon and it opens to "no value / not connected".

  I have reset the scanner; have you checked all connections... no change.

  I put on computer.

  The scanner scans noise when it starts up.

  But when I press the "scan" button (or any button) on the scanner itself, nothing happens.

  Using OS X 10.6.7

  Any ideas?

  Hello nikhil_gupta

  The Scanjet series of scanners is of commercial products. I suggest you post in the HP Business Support forum for a better chance to find a solution, because it's the boards of HP for the consumer and there are people less familiar with this product range.

  You will find the Board Commercial Scanjet here.
  HP Business Support Forum: Scanners

• Photosmart HP 7520: scan hp connects to the scanner

  I have a new MacBook Pro that came with installed Yosemite.  I think that HP Scan frequently does not connect to my scanner HP Photosmart 7529 using my wifi.  I get an error indicating that the scanner... is currently unavailable.  I called the service of HP and their only solution was to do the following in order: 1. turn off the router, 2 disable the 7520, 3 put the router 4 switch 7520.  Now, it works but it happens regularly and frankly is quite a pain and I'm sure is not how it is supposed to work.

  The scanner worked well with my previous MacBook Pro (OSX Lion).  The scanner also works through preferences, but that method has very limited functionality.  How can I get this problem?

  Hi @normka,

  Welcome to the HP Forums!

  I'm sorry to hear that your HP scanning does not connect to your HP Photosmart 7520 scanner. But I'm happy to help you!

  Please have a look through this guide to scanning, "computer no. has detected" or a Message appears "connection error" for HP Photosmart e-all-in-one 7520 Printer series.

  This guide may also help HP Scan software done is not open or stops responding in Mac OS X.

  I hope these guides will solve your problem and I thank you for posting!

• HP officejet Pro 8600 cannot connect to the scanner

  HP Office jetPro 8600 NG11a, Windows 7 OS, connected to the network via an ethernet connection

  I've only had the printer for a few months. Initially, had problems with the network connection that has been resolved by manually inserting the IP address outside the DHCP range.

  I now keep getting a scanner mesagesaying is not available. I try and turn it back on, but it does not work

  I have run the analysis doctor and followed the instructions but it is unable to solve the problem.

  I uninstalled and reinstalled drivers and who does not.

  Here is mention of the IP address, but as I had all the problems before I am reluctant to interfere with the IP that the printer itself is OK.

  Nothing has been changed on my system, I have not actually used the scanner to date but notice all of a sudden the error message on my toolbar and then found that the scanner will not work.

  I would be grateful for any help.

  Much thanks 2DX

  2DX

  Thanks for responding.

  I worked my way through all the suggestions and nothing worked.

  For the moment everything is OK, I've installed a new driver of network and turn on the printer before starting the computer well.

  I cross my fingers, but it is very worrying that I had all these problems of network with a new printer.

  Cordially 2DX

• M1212nf MFP: M1212nf MFP cannot connect to the scanner

  When you try to scan a document using the scanner in the HP folder or readIris or paper port 14, I get a could not connect to the message scanner.

  Have tried on/off switch, unplug everything and updatingthe drivers and firmware from the HP site and still nothing.

  Configuration on PC does not bud in a long time and the scanner was working a few weeks ago, but now I get the error message.

  HP support is virtually non-existent, and their software diagnostice did nothing either.

  Also.   I noticed on the LCD Panel there are 3 lights left... Triangle of green yellow continuous top on), with exclamation mark in the middle (at large) and an orange blickinglight next to what looks like a box with a bunch of circles inside (flashing continuously). (I can't find what this icon/light. I suspect he might tell me to clue somehting which is related to the problem, but not what it means.

  Can anyone help me please with this problem.

  Thanks in advance.

  Garry

  Hi @Big-Gee,.

  Welcome to the HP Forums!

  I understand that you can not scan with your printer HP Laserjet M1212nf on Windows 7, and you see the flashing lights on the printer. I'm happy to consider these questions for you!

  To check the printer hardware is functional, are you able to make copies using the printer scanner glass? Overview of the copy.

  In the meantime, please see page 196 in your printer, User Guideand follow the steps.

  I hope this helps!

  "Please click the Thumbs up icon below to thank me for having responded."