connect the two controls of VCS to Call Manager, unity and IM/P by AXL for migration

All,

I'm migrating from physical to VM for my VCS-C/E. can I connect ' my existing physical VCS both my new virtual machines to CUCM, unity, IM/P by AXL at the same time? or should it be done at the during the downtime of the migration?

The new virtual machines are not ready yet... always set up the production.

Thank you

RB

You can integrate physics VCS C/E with CUCM, CUC, IMP from now. Once you are about to migrate to virtual VCS C/E, you can integrate virtualized VCS C/E with CUCM, CUC and IMP and shut down physics VCS C/E.

Tags: Cisco Support

Similar Questions

  • Connect the two spreadsheets through a pl/sql function registered

    Hello
    Need help to connect the two worksheets using a stored function.

    Step 1:
    Created a function * (test_global) Pl/SQL * in which a table * (TWG) global * is inserted with lines based on criteria (via a call to a pl/sql procedure packed).
    The function returns the number of rows in the global table or 0 if no row is returned.
    The TWG was created using "On Commit preserve rows.

    Step 2:
    The function test_global has been saved to the Finder via the "PL/SQL functions to register.

    Step 3:
    Create a spreadsheet calculation - & gt; Sheet1 and included a Calculation (calc_global) that calls the test_global function.

    Step 4:
    Add another sheet of calculation - & gt; Sheet2 based on a query to select lines in the TWG where calc_global & gt; 0

    Step 5:
    Refreshed Sheet1 - & gt; displays the number of rows as * 5119 *.
    Refreshed Sheet2 - & gt; takes some time to run but returns no data

    Tried to:
    ) a calc_global link on Sheet1 with the help of sheet 2 links management, this does not work either
    (b) changed using the Pragma autonomous transaction function; gives an error that says no data returned by 1 sheet Sheet2.

    Please help with a solution, it seems that there are data in the TWG at the time Sheet1 is running need to display data in the sheet2 worksheet.

    Thanks in advance
    SP

    Hello

    You need to call test_global function once on Sheet1 that fit lines within the TWG. In Sheet2, you simply select the TWG and do not have the conditions of anywhere in this form. Try to run Sheet2 without calc_global > 0.

    Rod West

  • What should I do to get my pc to play through the TV? Ive connected the two, but still not getting all of the music television.

    Ive connected the two, but don't know how to get the sound to play through the TV speakers.

    Standard graphics cables don't carry audio, you need HDMI cables to the video with audio. If your PC or TV has no audio HDMI capability must come from the audio output jack on the PC and go to the audio in connector on the TV, which is probably phono, so you'll need stereo Jack 3.5 mm to phono plug lead (or 3.5 mm jack on some audio input of your TV is compatible).

    Tricky

  • When I sign in the two screens come Hotmail. It indicates Hotmail and the other live hotmail. How can I get just a sign, preference of hotmail

    original title: 0

    When I sign in the two screens come Hotmail.  It indicates Hotmail and the other live hotmail.  How can I get just a sign, preference of hotmail.

    This type of issue of hotmail is not supported in these forums.

    Discover the solutions to Hotmail at: http://email.about.com/gi/o.htm?zi=1/XJ&zTi=1&sdn=email&cdn=compute&tm=8&gps=502_360_1277_617&f=00&tt=13&bt=1&bts=1&zu=http%3A//windowslivehelp.com/forums.aspx%3Fproductid%3D1 if you can't find an answer, then click on the link to the Forum and post your problem where Hotmail and Live Hotmail questions specialists will be happy to help you with your problem.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Connect between two different applications. A call to the other application.

    I would like to know if it is possible to connect between two different applications in oracle apex IE appeal one request for the other? If the applications are allowed even say LDAP.

    Yes,

    Refer to the post office, requested by me and answered by fac586

    How to use one login for all applications in one only workspace

  • How to activate the two IPS on VCS starter pack express

    I have the Starter of Cisco Express works with a single IP address using a NAT. This only works inside the LAN. To enable this machine on the internet, I bought the key option to double network interface. I enabled both interfaces, but I don't know how I should configure the two IPS by access from the internet. I tried to activate the static NAT, but it did not work.

    There is only a single default gateway and this is where most of the traffic will be released and which should point to the internet router.

    If you have addresses of internall more than 'LAN', you can simply add additional routes via the administration console.

    As if LAN is connected to LAN2 192.168.150.0/24 and you 192.168.175.0/24 your home and where your laptops

    router for tha is 192.168.150.1 you would add that, on the road to xcommand, add the command:

    xcommand RouteAdd
    

    *h 'xCommand RouteAdd'
    

    "Adds and configures a new IP route (also known as a static route)."
    

    Address(r): "Specifies an IP address used in conjunction with the prefix length to determine the network to which this route applies."
    

    PrefixLength(r): <1..128> "Specifies the number of bits of the IP address which must match when determining the network to which this route applies. Default: 32"
    

    Gateway(r): "Specifies the IP address of the gateway for this route."
    

    Interface: "Specifies the LAN interface to use for this route. Auto: the VCS will select the most appropriate interface to use. Default: Auto"

    for the example given, it would be (user admin via ssh):

    xcommand road add an address: 192.168.175.0 LG: gateway interface 24 192.168.150.1: LAN2

    But to be honest I'm not sure jabbervideo it works well with the highway espress in

    a lan environment double anyway.

    As with a vcs - c / e deployment you have the model of the internal and external with vcs

    different hosts where he tries to get funding and then depending on who gets the data

    for the record. It may be that in any case only get you external IP of the vcs-e.

    I would therefore simply deploy a DMZ where the outside and inside can reach the starterpack with

    the same address or even external ip using a NAT that is hosted in LAN1 put directly on a public ip address in a dmz...

  • I bought an iPad mini4 specifically for use with a pro Phanton3 drone. It will NOT connect the remote control with the drone. They say it's a problem of software iPad mini 4 9.3.3. How can I remove and reload it.

    How can I uninstall 9.3.3 an mini iPad iOS 4 and reinstall? I bought it specifically for a ghost Pro 3 drone, and it does not work with the drone. Someone had luck with uninstalling/reinstalling. At this point, I lost a LOT of money.

    Apple frowns on a decline in the ratings.

    While Apple allows, try downgrading to 9.3.2.

    For a limited time Apple will return you to the previous version.  Do not hurry.  This period takes up to a week.

    See brownox second post here:
    https://discussions.Apple.com/thread/6545455
    and
    http://www.GottaBeMobile.com/2014/09/17/downgrade-iOS-8-to-iOS-7/

    see which versions are allowed:
    http://API.ineal.me/TSS/status

    --------------------------------------------------------------

    See the arizonacat post and others on this topic.

    https://discussions.Apple.com/thread/5337442?TSTART=0

    arizonacat notes these sites:

    --------------------------------------------------------------

    See the second procedure in reloading the software from scratch.

    Re-boot ipad.

    Press on and press and hold the sleep/wake button until a Red slider appears, and then drag the slider. Press and hold the sleep/wake button until the Apple logo appears.

    https://support.Apple.com/en-us/HT201559

    Force power down if above give it trouble you.

    At the same time hold the sleep/wake button and the Home button. Ten seconds or more.  Keep until the Apple logo appears.

    more information on the re-start:

    http://iPad.about.com/od/iPad_Guide/SS/how-to-reboot-your-iPad-power-off.htm

    This these tips from MichelPM to improve performance:

    https://discussions.Apple.com/message/29504169#29504169

    https://discussions.Apple.com/message/29504311#29504311

    Restore factory settings by loading the latest version of the ios that will support your machine:

    (1) make a full backup of your device if necessary.  Is two times better - cloud and computer.

    https://support.Apple.com/en-us/HT203977

    (2) three methods of restoration of your ipad.  [simple as abc]

    2.a) "you can use iTunes to restore your iPhone, iPad or iPod touch to factory settings and the latest version of iOS."

    http://support.Apple.com/kb/HT1414?viewlocale=en_US & local = en_US

    2.b) be a little more insistent: "you can put your device iOS in recovery mode, then restore it via iTunes.:

    http://support.Apple.com/en-us/HT201263

    3.c) as a last resort, you might consider DFU (Device Firmware Update).  This could void your warranty.

    http://www.IMore.com/Tip-put-iPhone-iPad-DFU-mode

  • is it possible to establish a direct connection between two computers, one running on windows xp sp2 and other running on windows xp sp3?

    Hello
    I connected two computers, one running on windows xp sp2 and others running on windows xp sp3 via com using RS232 port via link Modem DFM-562E ++.
    I am able to dial numbers from a PC successfully.
    But when I do a direct link between them (one as a host, the other guest) through the com port, I get error 777.
    Is this because the two PC's using different service packs?
    Help, please.
    Thank you & best regards
    Ravi

    It is not the service pack - although you should have installed sp3 now.

    Your message is not clear: have you been able to connect successfully computers using your modem D-Link?  How did you do that?  Will there be a modem in the second computer?

    What cable are you using to establish a direct connection between the com ports on both computers?  If you have purchased this cable online, please provide a link to the site where you bought it.

    Please describe the physical connection between the two computers.  For example, this is how you connect to the Internet by dial-up services:

    computer 1-{(9 broches) RS-232 serial port}-{RS-232 cable supplied with the modem}-{modem}-{phone cord (RJ-11 modular plugs at each end)}-{telephone wall jack}

  • Hybrid services and connector on VCS - Cloud Collaboration management - features and Workflow management

    Hello community,

    I have a few questions about the hybrid Service on the CV:

    -We have just a VCSE over the WAN. How we deploy hybrids? Or to buy a VCS? Is eunogh eval vm?

    -What are the features with just VCS? Are we able to connect remote employees or better B2B solution?

    -What are the requirements? We have just VCSE, TMS, TMSPE and MCU. Is it possible to use something with this infrastructure at the service of the hybrid? I just saw a requirement is webex we have Don t. What kind of Webex solution they want?

    -How communication works (just SSL?)

    Thank you very much.

    Kind regards

    Marco

    Hi Marco,.

    Patrick was probably the best link for documentation available for Services most hybrids Spark.

    You are right with a VCS Expressway, it would not allow set you up the service, but - you can run a VCS control keyless configuring the hybrid Services / features to the calendar.  The virtual machine would essentially exist just for the features of the Services hybrid and requires no licenses or keys.

    -Jonathan

  • the upgrade from Win 7 to Win10 (upgrade Assistant) and get stuck on 99% for 8 hours.

    my laptop is acer aspire 5560 G with 6 GB of Ram DDR3, 750 GB HDD and amd quad - core processor A8 - 3500M with turbo core 2.40 GHz.
    and I have 250 GB of free space on the disk (C).
    can anyone help please?
    Thanks with regards.

    If the Upgrade Wizard of Windows 10 becomes blocked or unresponsive to 99%, wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.

    If you encounter an error about enough space to perform the upgrade, see the instructions:

    How to install Windows 10 on devices with limited space

    Task of pre-required

    When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

    Retry the upgrade manually:

    Option 1: Using the media creation tool

    Download the media creation tool

    Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

    Note: How to check if you are downloaded or installed the update Windows 10 November

    Select upgrade this PC now and then click Next

    Option 2: upgrade using the file ISO for Windows 10.

    Task of pre-required

    When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

    then

    then

    • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
    • Reboot several times, and then try again.
    • Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
    • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
    • Support your default BIOS reset BIOS.
    • Check if there BIOS updates available for your system, and then to apply them.
    • If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
    • Perform a clean boot, restart, and then try again.
    • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
    • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
    • If this does not work, try using the. ISO file to upgrade if possible.
    • If you are connected to a domain, go to a local account.

  • What is the best way to connect the two interactive reports?

    Hello

    =================
    Set of bottom-up
    =================
    I created two interactive reports - report on the project on the project page and report of tasks in a task.
    Project report on the project page can contain several projects.
    Report of the tasks in a task can contain several tasks.
    A project can have several tasks.
    But a task can have only one project.


    =================
    What I'm trying to reach
    =================
    When I click on a project name, it must pass The ID of project of work page and view jobs that are established for the project.
    When I create a new task, past project ID must be mapped to the task.


    =================
    Challenges
    =================
    1. How can I pass Project ID of the project page on the task page while clicking on the project name in the project page ?
    2. How can I get the project name in the page of work based on the project ID goes from the project page ?
    3. How can I view jobs related to the name of the project ?
    4. How can I take project ID passed to the task page and map it to a new task?

    Thank you
    Guy

    1. How can I pass project page ID of the project to the task page while clicking on the project name in the project page?

    Create point hidden in a task, for example: P2_PROJECT_ID. That the link on the column to the task page:
    Interactive report-> column change-> link.

    2. How can I get the project name in a task based on the project ID password page of the project?

    There are two ways you can create a function that will return the name of the project by id or you can post the name of the project to the task page (the second way is dangerous, you can miss some parts of your project name if you have a symbol ',')

    3. How can I view the tasks on behalf of the project?

    In the interactive report source add condition to your query, for example:
    and task_table.project_id =: P2_PROJECT_ID

  • connecting the remote control as sysdba

    Hello

    in 8.1.7.4 on Win 2003 machines
    from a remote machine, I have problem to connect as sysdba:


    SQL > connect sys/***@mydb as sysdba
    ERROR:
    ORA-01017: name of user and password invalid. connection refused


    SQL > connect system/***@mydb as sysdba
    ERROR:
    ORA-01031: insufficient privileges

    SQL > connect user1/***@mydb
    Connected.

    What must be defined in order to be able to connect as sysdba.
    Thanks for the help.

    The following works on Unix. The process should be similar under Windows. Really, you should switch to a supported database.

    The init.ora parameter remote_login_passwordfile EXCLUSIVE value

    Create a password file: -.

    orapwd file = password$ ORACLE_HOME/dbs/orapw$ ORACLE_SID entries = mysyspassword = 5

    Published by: Robert Geier, Sep 24, 2008 11:18

  • Connect the Monitor Control Panel program

    Try to use the workspace edit CS5.5 in first Pro CC (2015). I have inadvertently undocked from the program monitor Panel but can't seem to get it to dock once again. Window/workspaces isn't an option restore workspace. What Miss me?

    Hi Frank,.

    Go to Documents and rename the folder 'Adobe' to 'Old.Adobe '.

    It resets the older preferences and resets the settings back to default.

    Kind regards

    Navdeep Pandey

  • JavaScript to connect the two textfields

    Have a form with 2 text fields, txt1, txt2. The user must enter a code between 01 and 99 in txt1. If the code entered in txt1 is between 71 and 84, txt2 must be completed by entering a code between 01 and 73 or 85 to 99.

    Wanted to, that when the code was found txt1, if it was from 71 to 84 txt2 fill color change to yellow, highlighting to a code entry. When the user has entered the fill color code would disappear. Also, if they have mistakenly entered a value in to txt2 from 71 to 84, the fill color change to red or a warning message. If a range value good code has been so concluded txt2 disappears the fill color.

    Can someone help me?

    In the event of txt1 output put:

    If (this.rawValue > = 71 & this.rawValue)<=84)>

    txt2. FillColor = "225,225,0";

    }

    else {txt2.fillColor = "255,255,255" ;}

    In the event of txt2 output put:

    If (this.rawValue > = 71 & this.rawValue)<= 84)="">

    this.fillColor = "255,0,0";

    }

    Else if (this.isNull) {}

    this.fillColor = "255,255,0;

    }

    else {this.fillColor = "255,255,255";

    }

  • My husband is the only administrator on the computer and he told me the password and parental and visualization of the activity control. How can I replace it and become an administrator?

    I NEED TO BECOME AN ADMINISTRATOR ON MY COMPUTER. MY HUSBAND IS THE SOLE DIRECTOR. AND IT ME AS A STANDARD USER AND PUT SAFETY ON ME. I CAN'T DO ANYTHING IN THE COMPUTER WITHOUT PASSWORD WHICH IT WONT GIVE.IS THERE A WAY TO SUBSTITUTE ME FOR HIM AND TO BECOME AN ADMINISTRATOR OR FIND HIS PASSWORD? IT IS JUST ANOTHER FORM OF CONTROL AND IM TIRED OF IT. Help!

    http://support.Microsoft.com/default.aspx/KB/189126

    "Microsoft's strategy concerning lost or forgotten passwords"

    Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

    http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

    Read theBANNING of cracking of passwords information tools information provided in these forums in the thread above posted byBill fill MSFT, moderator

    See you soon.

    Mick Murphy - Microsoft partner

Maybe you are looking for