Connect to a 4215 sensor

Similar Questions

• The system IDS 4215 sensor no IPLogs

  Can someone enlighten me please?

  I have configured a sensor 4215 running the latest version 4 of the software & signatures.

  I have configure the sensor to use a Pix to help fleeing, the configuration worked for more than a week and I chose some to block on signatures and it works and I can see guests in the red list.

  My problem is that under , there is no listed log files,

  Is this correct?

  In version 3 on a 4210 sensor there are several listed log files, these are downloadable on my local machine, where as soon as I could import them in event IDS Viewer and display all events, this is no longer how it's done in version 4?

  What I can do under , is see the list of events that have been posted through the web page of IDM.

  Any help would be greatly appreciated.

  Concerning

  Mark

  First of all, I think that there is some confusion between the IP logs and alarms logs.

  There are 2 types of log files in version 3.x.

  The traditional log file which contained alarms in a comma delimited format that can be imported into VEI.

  The second was an IP trail which was a log of the actual binary packages that have been observed after the signing of fire.

  The action of "log" on the signature would result in the creation of a file of Log of IP and had nothing to do with or no alarm was recorded in the comma-delimited log file.

  Logging of alarms in the comma-delimited log file was controlled by will loggerd has been enabled on the sensor and if loggerd has been installed as a destination for messages in the destination file.

  In version 3.x, you might download individual logs to your own PC files and open them in IEV or load them into your own database.

  In version 4.x is therefore more the concept of individual alarms for files and the log of the IP on the sensor data.

  The alarm logs have been replaced by a circular buffer called eventStore. It can be compared to a large circular database. The eventStore is 4 GB in size and when it is full will begin to overwrite the oldest alarms with the most recent alarms.

  IP logs have been replaced by a similar circular storage for the journal of intellectual property data.

  The data of the alarm in version 4.x cannot be FTP'd the sensor as a diary of the alarm.

  Instead, you have two options:

  (1) use IDM to query the eventstore and pull the alarms that match some criteria. You can then view messages in plain text format.

  (2) use the command "Show events" CLI to do the same thing as IDM can do.

  3) contact Cisco TAC and ask for RDEP specification which provides the syntax for you to create your own queries to plug into the sensor and fire alarms in a raw XML format that you can then load into your own database.

  (4) If you are a user of VEI then the 4.x VEI has the ability to pull older alarms of the probe.

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/csids/csids10/idmiev/swchap6.htm#604023

  In the device properties simply, with the older start time and VEI will automatically extract in these earlier events of the sensor.

  NOTE: It is not a function import that can import plain text or events XML you would see options 1, 2 or 3 above. SO if you want to see in VEI then use option 4.

  Now for iplogs they can be FTP'd to the sensor using the command copy. But iplogs are the binary packet data and not a list of alarms. They are created only when the action of "log" is selected.

  NOTE: IP logging consumes resources sensor and can slow down the performance of the sensor. It is not necessary to IP Log an alarm to see the alarm itself VEI or other management positions. If the action of "journal" that should rarely be used when the binary packet data are necessary.

• 4215 Java error: when connecting the IPS Event Viewer

  Hello-

  I got a java error trying to connect to my 4215 with Cisco IPS event viewer. It's as follows:

  IOException in Subscription() open: java.security.cert.CertificateExpiredException: NotAfter: Sunday 29 March

  The web server is running on 10.x.x.x:443? Please check the settings of the device communication.

  I can set the date on my pc to last week and everything works very much like b4. I tried to update my java to the latest version and created a new certificate of IPS.

  Any help would be greatly appreciated:

  Thank you

  Hello

  The problem can be solved by following the steps below

  1. connect the sensor.

  2. run the tls - generate the command key.

  3. make sure that the certificate is generated.

  4 Add the device again. It should work now.

  Ref: http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_qanda_item09186a008025c533.shtml

  Whether she helped.

  Concerning

  Sridhar

• Tecra A11 - 11L - fingerprint sensor does not work

  Hello
  I had a problem with my Tecra laptop. The fingerprint sensor does not work since yesterday. It also disappears from the hardware Manager. I tried to reinstall the utility, but the setup.exe will not run successfully. When I try to install the utility directly from the amd64 Directory installation will be successful, but the software is unable to connect to the fingerprint sensor. I also tried to install the original Windows image, but the sensor does not work.

  You have any ideas?

  Berst cordially
  Thunder1988

  You can try a BIOS update and set the default BIOS. If it still does not appear in Device Manager, the player is maybe defective or there is a connection problem. I'm guessing that the laptop is still under warranty, you may have to send the laptop to a Toshiba repair center.

• Interference between channels using a block of cFP-TC-120, CB-3 connection

  Using a CB-3 with a cFP-TC-120 module connection block for read sensors millivolt. The sensors are pressure with an excitation of 10V sensor. Millivolt signal varies 8mv to-70mv. All have 8 differential channels wired in two of these modules sitting in slots 3 and 4, a slot 4 back on the plain. There is also the 24V in the electrical box used by two modules to relay PSC - 421 driving valves that open, leads at room temperature or in separate the empty rooms they are in slots 1 and 2. Do to the cFP-TC-120 the same and each is affected in the same way, more interference is not only between the same module 120 channels, but also between the modules! If a sensor is vacuum where the millivolt is around 7 mV reading is stable through the following conditional changes. "If a sensor is emptied at room temperature, say channel 6 and channel one is already at room temperature its reading can change by 0.25mv be affected by the evacuation of other channels. This worsens proportional number of channels is ejected by up to 0.5 mV for all other channels that are evacuated. This module is differential and each channel and the module are isolated we don't understand where or how this interference takes place. Help!

  Ben,

  We have done some trouble shooting and isolated in millivolts sensor signal of the NOR. We found that voltage was real and electronics is not the field point. The system runs on 24V except for sensors that have an excitation of 12v. We found that the Commons between these continuous tensions were just that, each have been shared. We have separated the Commons and vola! Perfection.

  Leigh

• inductive proximity sensor with DAQ

  Hello world

  I'm planing to connect my inductive proximity sensor with DAQ of NOR-9215 but won't be sure this thing work perofectly. Also I do not know how to connect my sensor with the BNC Terminal.

  The sensor that I use is Automation direct AM9-05-1A with a voltage of 10 to 30 VDC and output voltage of 0-5 VDC range.

  I want DAQ to monitor my output signal of the sensor.

  It seems that you have two choices.

  1. cut the connector from the sensor and cable drivers appropriate for a piece of coaxial cable with a BNC connector plug (and separately to the power supply).

  or

  2. get a socket that fits the plug sensor cable and its terminals to wire to a coaxial with BNC Plug cable and power supply.

  Lynn

• If the IDS 4215 platform support E4 7.0 (2)

  Hello

  We are trying to upgrade the engine in our IPS and IDS devices. We have a single device IDS 4215 in our environment that installed with engine E3. Please let me know as this engine support E4 with 7.0 platform (2) version. If so, please update me with the name of the .pkg file. Thank you.

  Vinoth salvation,

  The IDS-4215 sensor does not support the version of the IPS 7.0 software. The latest version of the software supported on this platform is 6.0.

  He argues, however, E4 engine in combination with the version of the software 6.0 (6).

  To upgrade your sensor to the E4 engine (and use the latest signatures), improve it with the 6.0 (6) E4 software package pkg file.

  You can download this update from the link below:

  http://tools.cisco.com/support/downloads/go/PlatformList.x?sftType=Intrusion+Prevention+System+%28IPS%29+System+Upgrades&mdfid=278244333&treeName=Security&mdfLevel=Model&url=null&modelName=Cisco+IDS+4215+Sensor&isPlatform=N&treeMdfId=268438162&modifmdfid=null&imname=&hybrid=Y&imst=N

  If you are currently using version 6.0, you will just need the "IPS-engine-E4-req-6.0-6.pkg" file to upgrade the engine, if you are on an earlier version of the software, you will need to download "IPS - K9 - 6.0 - 6 - E4.pkg"

  Be sure to read the readme file before the upgrade:

  http://www.Cisco.com/Web/software/282549759/32618/IPS-Engine-E4.Readme.txt'

  Let me know if you have any other questions.

  Best regards

  Stijn

• Sensor not known version of the IDS MC

  The system IDS 4215 sensor is version: 1.0000 S47. The MC of the IDS (version 1.2) does not have this version and recommends an update of the signature.

  I downloaded the file IDS-K9-min-4.1-1-S47.rpm.pkg to the web site of Cisco and attempt to update the signature in accordance with the instructions in the ReadMe file.

  I received the following message:

  "Failed to update the object. The provided update package seems to be corrupted, or refused permission to read the file. Please check the contents of the update package and try the operation again. »

  I checked the downloaded file's MD5 signature, and it's OK. I tried to download the file again and I got truncated versions (size about 256 KB).

  I use the correct file? How can I get the correct version of the file? Am I missing any parameter?

  Thank you for your help.

  What you have is the package of real update to the sensor itself. If you use MC to push updates, you need the package from the following location:

  http://www.cisco.com/cgi-bin/Software/Tablebuild/doftp.pl?ftpfile=cisco/crypto/3DES/cw2000/mgmt-ctr/ids/ids4updates/IDS-K9-min-4.1-1-S47.zip&swtype=FCS&software_products_url=%2Fcgi-bin%2Ftablebuild.pl%2Fmgmt-ctr-ids-ids4updates&isChild=&appName=&tbtype=mgmt-ctr-ids-ids4updates

  It contains the files needed for the update of MC and the real update package will be pushed to the sensor.

• OfficeJet 4215 and Windows 7 - scanning

  I bought a new Windows 7 computer.

  I connected my Officejet 4215 all-in-one.

  The functions of printer perfectly under Windows 7 came with all the drivers etc so that it works normally.

  BUT it won't scan anything. All images HP management software and icons are missing.

  When I press the scan button it says "you must install or run device...". »

  I try to do an installation of my original disc and it says that the device is already installed.

  I can't find anything in these forums to help me then... what should I do?

  Your printer is older and not fully supported on Windows 7.  Here are workarounds.

• Difference between line and liabilities of ips mode

  Hi I'm new to ips. I got a 4215 sensor ips who says she can define control interfaces it is in passive mode, in which it can read packets directed to it by a switch. now since it is an ips when he reads a packet that triggers an alarm and action game goes to zero it will require a pix or a router to block traffic from the attcker or it may hang on its own since it a FPS. I'm not sure about that. can u pls guide me on this. At latest

  concerning

  Assane

  Hi... the main difference is that Supreme or passive mode provides reactive protection. It can be configured to reset the connection to the attacker, IP blocking, and registration of intellectual property, but it cannot stop the initial attack on the objectives. The reason is that packets which he controls have been copied and transmitted by sessions SPAN or promiscuosly listening to traffic on a segment.

  When the sensor is on inline mode, traffic must pass through the interfaces of the probe (pair). Traffic is inspected, tested against the signatures and then if OK, then transmitted to the destination. This approach offers preventive protection because the sensor can stop an attack BEFORE it reaches the target which is something that IDS (passive sensors) can not do

  In summary, I suggest you try to use your sensor in inline mode... It offers not only the same perfect for ID but additional protection against attacks.

  I hope that helps... Please note this!

• problem mouse USB

  Hello

  I bought Tohsiba satellite a50-106.

  for this model, I bought the optical mouse A4 Tech AK-5, but after you have connected to comp, it doesn't.
  technicly mouse it's ok, I checked on my desk.

  After connection to the optical sensor usb in the mouse does not light, but there is new message device to find, then comes another message, which is device may not work correctly. Does not install the mouse drivers.

  When I get out the slot usb mouse comes another problem. USB slot is inactive (not see). When I connect diferent peripheral (floppy drive) system not to see too.

  I need to uninstall & then install the drivers for the usb hub.

  If any 1 know whwt 2 so that the work of memo please help me.

  Hello

  Do you have a few with this mouse driver CD? You have the same problem with all three USB ports? Can you also check the BIOS settings if there is option called the pointing device settings. There are a few options. You can change it with the space bar. I don't know, but there must be option called simultaneous or something like that.

• Qosmio G20-102 TV TUNER: how to get this to work - what cables are required?

  Hey everybody,

  I just installed vista on my laptop QOSMIO G20-102 (PQG20), I have media library now.
  My laptop came not like MEDIA CENTER EDITION, it came under the home edition of Windows XP (laptop purchased in July 2005).
  I got 3 cables which I have no idea how to use...
  laptop was purchased in Dubai/Emirates and I live in Malta

  These are the cables >
  http://img399.imageshack.us/img399/7189/dsc00780gi6.jpg

  Now for my question (s):
  1 which of these cables do I need? Im just trying to figure out how to get my satellite tv or digital cable to work on my laptop.
  2 antenna adapter (see picture) is not for coaxial cable, what can I do?
  3 I did WINDVR more due to the upgrade of vista, Media Center Gets the job done but I don't know what to do... This guide has confused me even more > http://www.microsoft.com/windowsxp/mediacenter/using/setup/settop.mspx
  I don't have IR control cable, I do not have a remote sensor (but I have some sort of built in the remote sensor on the front of my laptop.

  I'm looking for advice as for example buy this, get rid of it, install this etc...
  Please, anything that can help is appreciated!
  If you need information more just ask, I am here ;)

  Yours sincerely
  Ishmael

  Hi ismael,.
  I'll try to help with that, but it's a long way to the road...
  I don't know what Tv system is used to Malta (Pal)?

  The best way to set up your TV's with Media Center 2005 edition.
  Cables:
  Check the back of your cable TV installation box and find the composite or SVHS output. If you have only the composite, you can use the composite cable of the posted image. If your TV decoder has the SVHS, so you should use, to the better image than composite. You must obtain a SVHS cable for this.
  Look for the audio output rca, too. Mix with the composite cable for the audio Qosmio.

  But you must have:
  1 control cable IR, for media center 2005 configuration as well as your TV decoder. It is cable connected to the remote sensor (see fact sheet on the back).

  2 sensor for your remote control and configure it with the remote control of your TV decoder. In this way, you can control the receiver cable channels, using the remote control for your Qosmio G20 media center edition.
  Recovery: you can change the channels on your TV decoder using the qosmio remote control.

  3. remote control for you media Center 2005, one that came with your Qosmio g20.

  Open the TV on Media Center 2005 configuration and follow all the steps required for installation.
  You must follow the guide, as is explained in the image you posted:
  http://www.Microsoft.com/windowsxp/mediacenter/using/Setup/SetTop.mspx

  If you have all these cables, you can use the Qosmio player to watch TV. It is not tied to windows OS.
  Here, simply connect the coaxial cable and let the Qosmio player search for available channels in your area. Qosmio player has the opportunity to set the colour TV system in any part of the world. all NTSC regions in all PAL regions.
  If you have the remote control for your Qosmio, TV keys will work directly with the Qosmio remote sensor on board, without needing the external sensor of Microsoft.

  I hope this helps you
  Francisco

• USB modules of NOR?

  
  

  Hello riotmus

  I think I understand your situation. You want to know if it is possible to connect the two USB sensors to your cDAQ so in this way the use of a USB port from your PC, am I right?

  Unfortunately, NEITHER does not have a module of USBs and there are other methods like the use of the USB ports of the chassis (according to what frame you own), but it could be much more complicated.

  I can think that you can try is to use a USB HUB, the only thing, is that the bandwidth will be shared between the three components in this case, but according to the flow rate you use, this could be a good approach.

• USB-6211: analog input signal affecting another of the same map AI

  Hello

  I use the DAQ-nor-6211 map and DAQmx features to read a hammer and a signal of the accelerometer and then use other LabView functions to make the FFT of these analog input signals. However, it seems that the analog inputs where the hammer and the accelerometer are connected generate a kind of noise or influence in other entries of this data that is not connected to any other sensor acquisition board.

  I've had different experiences in order to check if the problem is with reading the card: put the accelerometer and hit the dog in another table where the DAQ card table was located (to avoid the vibrations on the map and a possible noise), ai1 entry was logged on the differential mode on the dog and the ai4 of entry is connected to the output (z axis) of the accelerometer. The other 2 ai2 and ai3, entries that can also be read by my LabView program, are open (i. e., any other sensor is connected to the card). When the structure where the accelerometer is located is struck by the hammer, the signal of ai2 ("x axis" seen in the first attached document) has a curve (on the time domain) which initialize almost at the same time that the hammer and the a3 of entry has a weak signal, but with the swing as well as the signal of ai4. The document "hammer ai1 + z_axis connected_ _x_axis disconnected ai2 + y_axis ai3 ai4" images that I captured the chart created in LabView. On these graphs, it is possible to check on the FFT the ai3 signal and ai4 has the same behavior (with different intensities), and enlarged figure of time domain image, we can see that the signal of ai2 increase almost at the same time of the signal of the hammer (ai1). The signal picked up by the sensors are probably creating a sort of noise on open entries ai2 and ai3.

  Another experiment was conducted to check if the signal from a single entry that may affect the signal read from each other near the entrances: the DAQmx task Create channel had a physical channel has changed: ai3 entry has been modified by ai7 (maintain the same connection mode: differential), and the results are visible on the second attached document. In the graphs obtained in this experiment, it seems that the entrance of the hammer (ai1) affects the signal of input ai2 and ai7, which are not connected. And the ai4 signal does not seem to influence the other inputs, because he has a different curve on the graph of the FFT.

  The same experiment was conducted using the CSR connection (change threads and create the DAQmx Channel Configuration), but the results were the same as those found using differential connection.

  Finally, if the output of the accelerometer is connected on the ai2, the signal of the other open entries ai4 and ai7 seem to be affected by the signal of the accelerometer on ai2 (last document attached).

  Could you tell me if the problem I encounter is caused by the DAQ card with this information that I gave to you? And if the answer is Yes, do you know if there is a way to avoid this noise create in one entry on the other hand, it please?

  Thank you

  Maybe Ghosting or crosstalk? Just an idea.

• Pavilion dv7-6b63us: update Bios

  I have a Pavilion dv7-6b63us laptop.  I went into the Windows in file Explorer folder, msinfo32.exe entries in the search block and found that my Bios version is dated F.02 03/10/2011.  Then, I went to the section drivers and downloads for HP software and clicked on the Bios, and they showed a version of Bios F.1C dated 18/02/2016.  I downloaded the version F.1C and save my download folder.  It is safe for me to install this version of Bios on my laptop?  I read somewhere that you could be in a lot of trouble if you install a version of Bios that is not intended for your computer.  Can someone make sure it's OK to go ahead and install the Biso F.1C version?

  If the fan does not work, then it sounds like a bad fan sensor or a bad connection going to the sensor.

  The upgrade of the BIOS will not solve the error message fan you are experencing. In addition, it is not recommended that you upgrade the BIOS if the fan is malfunctioning under the fan kicks in full throttle during the upgrade as a precaution. If the fan does not work and you upgrade the BIOS and overheating of the computer will power off computer and will be probably corrupted BIOS and brick your computer.