OfficeJet 4215 and Windows 7 - scanning

Similar Questions

• OfficeJet 7310 and windows 8

  Does anyone have a work around to complete the installation of Officejet 7310 on Windows 8? Currently goes to this dialog box

  "Device Setup".

  installation of your device

  ___________

  The device installation program doesn't have all the

  Click next to continue the installation

  Comment: when you click "next"... the next screen disappears

  Notes:

  1 Selected win vista load for

  2 Council is 1.6 mHz dual core

  OfficeJet 3 in private IP network

  4 could not find the full base driver only choice suite

  THX

  GK

  San Diego

  Hi sdtechguy,

  There is no full feature software and drivers available for the beta to win 8 consumer Preview. The only option you have is to use the NUMBERS drivers provided by Microsoft. If you use the wireless printer, you will not be able to scan using these drivers of AMENDMENTS. If you install the printer through the USB port, you may be able to analyze the use of the pilot of AMENDMENTS. I hope that answered your questions on the subject with a sweep in WIn 8 consumer beta Preview.

• I have a printer hp officejet j4680 and windows 7. I can't use the cd to install for analysis.

  I have Windows 7 and I have a HP Officejet j4680, I couldn't use the instillation Cd to install the printer, but my computer has found the driver. The problem is that I have to analyze something and scan Windows fax program cannot find the scanner. How can I make the computer recognizes the part scan of the printer?

  Thank you Sandy

  Hi Sandy. I suggest if you could go to this site http://www.hp.com/customercare and find your product here. Once do you it please download the Setup online to re register the printer on your computer system.

  Because if you don't base drivers will not install correctly.

  Thank you!

• OfficeJet J6410 and Windows 8

  I recently did a cleam install windows 8 32-bit.

  I also downloaded the drivers and full software for my all in one.

  Printing was not a problem, but when I tried to scan, I got this error message: "Een benodigd component kan niet worden niet goed geinstalleerd is found." "Installeer bij het expensive geleverde HP Photosmart software opnieuw in try nogmaals you scannen.

  English translation: "a required component is not found or is not properly installed. "Install the HP Photosmart software and try to rescan.

  Details: 8, [(5, 0, 0)]

  I used scrubber to clean the PC, PC rebooted, used Ccleaner to clean up everything and cleaned PC manually from all records, "HP", Purifier used again and then restarted the PC. Software is installed again, no error during installation, but it doesn't scan, same error once again.

  PS. using scandoctor gives the same error.

  New system, pure install win8 then all initially installed the HP software, no problem everything works including the digitization.

  I reinstall the old hope of system that works for.

• OfficeJet 7310 All in One: Officejet 7310 and Windows 10

  A driver Windows 10 will be available for the Officejet 7310 printer?  Not clear about the downloads for this printer page.

  Thank you

  Cory

  The Windows 10 for the Officejet 7310 driver is available for download from HP here.  This is the version 14.8.0, updated December 5, 2015.

• Printing with HP Officejet 6100 and Windows 8.1

  I had no problem with the printer before installing Windows 8.1.  We installed the latest printer drivers from the HP website.  The printer wants to print to the back to the front, even though we clearly specified it to print from front to back.  It is typical for every program I use, but more troublesome for Sage 100 contractor, where I print paychecks and A / P checks.  We tried to uninstall drivers and reinstall them.  I even tried to "back to front" because it seemed he wanted to do the opposite.  He printed back to front.  Dial-up, rebooted and it continues to print at the back to the front.  I contacted HP Support and they don't have a clue as to why this is happening.  Help, please!

  Hello

  When you have reinstalled the printer did you use assistant printer?

  Try the following:

  Press enter
  Scroll down to print spooler
  Right-click on the spooler > select Properties
  Make sure that the Startup Type is set to automatic
  Under the service stop status
  Wait for Windows to stop the printer

  Control Panel > open the printer folder
  Right click on the printer icon > select Open
  Do you see the documents listed in the queue for printing?
  Click file > cancel all Documents

  Start > right click on computer > select Manage
  Click on continue on window UAC (Vista, Windows 7)
  Select Device Manager

  Click on the + sign next to Ieeee... compatible printer (Note: some models of printers require an IEEE 1284 parallel port, which allows the rapid two-way communication.)  Do not worry if it is not listed)
  Right-click on the printer driver and select uninstall
  Click on the + sign next to the imaging device (s)
  Right-click on the printer driver and select uninstall
  Click on the + sign next to printers
  Right-click on the printer driver and select uninstall
  Click on the + sign next to Bus USB controllers
  Right-click on the printer driver and select uninstall

  While the printer is turned on, unplug the cable from the rear
  Unplug the cable from the wall outlet

  Wait 5 minutes

  Plug the cable into the wall jack, and then the back of the printer
  Restart the computer

  Go back, and then restart the print spooler

  Try printing again

  Go to the manufacturer's website and search for updated drivers

• OfficeJet K8600 and Windows 7 Professional 64 bit

  My Officejet k8600 printer refuses to print full size 11 x 17 drawings.  Instead of printing a full-size drawing 11 x 17, I get a 8.5 x 11 print.  This only happens with Windows 7 Professional 64 bit.  This printer worked fine with Windows XP.  I really need the ability to print 11 x 17 drawings.  Help, please!

  Never mind.  I fixed it myself.

  I uninstalled hundreds of megabytes of useless HP driver software.

  I restarted my computer with the printer usb cable unplugged.

  When I reconnected the printer cable, Windows 7 loaded drivers from the Windows Update server.

  I can now print documents of size 11 x 17 prints as well as 8.5 x 11.

• OfficeJet 6700 and Windows 2008 R2

  Is there a driver for this OS?

  Yes

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=5058338&cc=us&DLC=en&LC=en&product=5058338&tmp_track_link=ot_search

• OfficeJet Pro 8600 e. problem scanning scanning and Capture App Win 8.1

  OfficeJet Pro 8600 e.  New.

  Installed on HP Envy touch 23. Running Windows 8.1.

  Wireless set in place. Fine prints.  Problem is the digitization of the HP scanning and capture the software App 8.1 Win

  With the help of scanning and Capture App I can scan pictures very well.  They come out clear.  Scanning documents in GRAY has several bands/lines in gray on the entire page vertically running.  Scanning COLOR documents are very good.

  Also, if I scan from the printer directly using the touch screen of the printer, the output of scan is fine.

  I did the Scan utility to discover any errors and it show everything.  I think it is a software error.  I'm going to uninstall the HP scanning application, and then reinstall.  So, I'll do the uninstall/reinstall and accountable.

  Also, I would like to know if there is a program of office for scanning?  I prefer to use it instead of the modern HP Scan and capture App.

  Thank you...

  Hi artrum,

  I understand that you have been scanning your Officejet 8600 problems using the program window of scanning and Capture. I will certainly do my best to help you with this!

  What you explained, I think: you're right, it seems that it is only a problem with scanning windows and the Capture program and as you could scan from the front of the printer you certainly have the HP software installed. I want to make is that you use the HP scanning software, where you must run is no longer in question.

  To access the HP scanning software and be able to access it easily from your Office I would like you to follow the steps below:

  1 go to your start screen and just start typing File Explorer. You should be able to open it then to access the files on your computer.

  2 then open Local (c) disc, followed by Program Files (x 86), followed by HP, then HP Officejet Pro 8600, followed finally by bin.

  3. in the bin folder, you should see HPScan. You will want to right click on HPScan and go to send to, and then select Desktop.

  Now, you should see HP Scan on your desktop and be able to open and browse this request.

  Hope this helps, have a nice day!

• all-in-one Officejet 4215: cannot clear the printer queue in Windows 8.1

  (Sorry if I am double-posting.  "I'm familiar with the operation of the forums.)

  I have a new computer with windows 8.1 and a HP officejet 4215.  I followed the HP instructions to install the downloaded software of the printer and it says to test the printing: pqtestpage.png - it is now stuck in the print queue and will not erase, if it says it is deleting.  I tried to fix it and he just keeps showing me the same problem.  Can anyone help (I desperately need to do my taxes.)  Thank you.

  Take a look at this link from HP.

• I need the scanner for hp officejet 4215 for the use of scan software

  I need the scanner software for hp officejet 4215 for the use of scan and when I press the scan button on the printer know any software to scan function.

  Hello

  Please use the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=351106

  Kind regards.

• HP Officejet 6600: HP Officejet 6600 stops during a scan, shows partial scan and expires

  Hello

  My Officejet works fine, but now I can't scan.

  HP provided scanning software (downloaded), I can start a scan and see the preview begins to be filled, but he stops just to scan after about 1/4 of an A4 page.

  My laptop fan starts to increase, and then after 30 seconds or a minute, the officejet abandoned on the scan and returned the material bar scanning in its final position.

  It doesn't matter if I use the flat or the document feeder scanner.

  Its as if the scanning starts very well and scan data arrived to my laptop, but then perhaps a connection problem occurs, and the analysis may not be possible to transfer data more.

  I uninstalled after software hp (all HP programs) and reinstall, but no difference. I can find and configure my officejet without problem.

  Scanning using a USB connection works without any problem.

  I recently moved the printer around my home network, and he has received various static ID. But I certainly gave him the ip address during the installation of the printer. But maybe there is a config file that is in trouble again?

  I stopped my Anitvirus (Ariva) and turned off my windows firewall. It has not made a difference.

  Previously I was optimizing my LAN MTU size, but I've returned all devices (that I can update) at 1500 MTU size.

  Works of fine officejet by using Linux. I can scan over wifi using 14.04 Ubuntu (which uses a size MTU 1452, so I don't think it's associated MTU). Its only if you are using Windows I have a problem.

  Could the previous ip addresses always somehow to use? An uninstall removes really all the config info? What I have to do manual labor of registry also?

  When the scan times out, the scanner software previews empty, and there is nothing to save. I can only "return" or use the Finish"" button.

  I also ran the hp scan doctor. All tests were green except the Scan for Windows (WIA). If I remember correctly, it says that the user has canceled the analysis during this test, but I have big anything. It seemed just to take a lot of time to do this part tests (> 30 years), and then I guess it expired.

  Thank you.

  I solved the problem. It turns out it was my antivirus, Avira program. I had to add an exception so that the web protection is turned off for the IP address of the printer.

  If you are using Avira, watch https://answers.avira.com/en/question/how-do-i-modify-avira-internet-securitys-web-protection-so-that-i-can-scan--27842

• MS WINDOWS 7/HP OFFICEJET 4215

  I have a new HP with Windows 7 computer and an old HP Officejet 4215 printer all-in-one.  I followed the instructions to update drivers, etc. and still can't print... any help would be appreciated.

  HP Multifunction printers may not work as expected after the upgrade from Windows Vista to Windows 7
  http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/a69394ca-7564-419C-87E0-97328d87c8b3

  JS http://www.pagestart.com

• HP OfficeJet 4650: HP OfficeJet 4650 does not print web pages: print from Word etc very well. Using Firefox and Windows 7

  HP OfficeJet 4650 does not print web pages: print from Word etc very well.  Using Firefox and Windows 7

  Œuvres of chrome!  Does this mean I have to give up Firefox?

  Thank you!!!

• HP Officejet H470btw wireless and Windows RT

  Hello

  I'm thinking to a workaround to get my Windows RT to print wireless on my HP Officejet H470btw I have a HP bluetooth USB adapt, but not WIFI we. Even if the printer appears in the control panel - devices and printers via USB and Bluetooth, I get a message that it is "not compatible with this version of windows.

  So I take it while the driver is not available for RT and solution of wireless connectivity that I do, even with AIO Sofware, my printer will never be seen any hardware print server Windows RT ARM tablets.

  Am I wrong?

  Thank you

  Lee

  Hi LeeJenson,

  Elucubration on my part, I guess that

  I did a little more digging and found the following information of this document; Printers for Windows 8 and Windows supported 8.1

  

  Looks like this confirms your original statement.

  "So consider, while the driver is not available for RT and any solution hardware print server wireless connectivity that I do, even with the software AIO, my willingness to printer never seen Windows RT ARM tablets.

   

  I'm wrong.

   

  
  But thanks for taking the time to work with me and hand on the HP Forums.