Connect to a card with two 8 pins Aurora R1

Similar Questions

• error code 43 usb not recognized when connecting usb (sd card) with asus X55C laptop.

  Hi, I'm 43 error code while the plugin my usb card with asus computer laptop X55C. I tried several methods indicated on the window on the error code 43 site but I have not any solution even took me out of my laptop battery usb recognize, but it did not work. I uninstalled the Device Manager usb driver, but it also does not work please help me.

  Hi Daman,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  You made any hardware or software changes on your computer before the show?

  Thank you for details on the question and your efforts to resolve.

  This problem can occur is because of corrupted USB drivers or incorrect settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run this Microsoft fixit and check.
  Reference:
  Hardware devices do not work or are not detected in Windows
  https://support.Microsoft.com/en-us/mats/hardware_device_problems

  If this does not help, use method 2.

  Method 2:
  Download and update the chipset and drivers USB of your computer from these links and check the issue.

  Driver Chipset
  http://support.ASUS.com/download.aspx?SLanguage=en&p=3&s=117&m=X55C&OS=30&ft=23&F_NAME=Chipset_Intel_Win7_64_Z9301020.zip#Chipset_Intel_Win7_64_Z9301020.zip

  USB driver
  http://support.ASUS.com/download.aspx?SLanguage=en&p=3&s=117&m=X55C&OS=30&ft=22&F_NAME=USB3_Intel_Win7_64_Z103214.zip#USB3_Intel_Win7_64_Z103214.zip

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• E4200 abandons the connection when streaming movies with two players in Blu-ray TV

  Any installation or advice I can do would help. When show us films in different rooms at the same time we drop our connections netflix or vudu. Can I turn on or off all the settings on my router that would help. I love this router have 35 Mbit/s on the internet high speed, so I don't think that's the problem. Range from 35 to 45 Mbps all the time. I don't know how to access my router settings and navigate so just need help on where to go and what to change if I can. You can help if you can. I have 3 laptops, wireless, two blue-ray media connected 1 printer.

  Thank you

  [email protected]

  Yes, there's a 1.0.01 and 1.0.02.  If you use the media server, apparently 1.0.01 is a better bet.  I do not use the media server and 1.0.02 works well for me.

• Best practices for network configuration of vSphere with two subnets?

  Well, then I'll set up 3 ESXi hosts connected to storage shared with two different subnets. I configured the iSCSI initiator and the iSCSI with his own default gateway - 192.168.1.1 - targets through a Cisco router and did the same with the hosts configured with its own default gateway - 192.168.2.2. I don't know if I should have a router in the middle to route traffic between two subnets since I use iSCSI ports linking and grouping of NETWORK cards. If I shouldn't use a physical router, how do I route the traffic between different subnets and use iSCSI ports binding at the same time. What are the best practices for the implementation of a network with two subnets vSphere (ESX host network: iSCSI network)? Thank you in advance.

  Install the most common iSCSI would be traffic between hosts and

  the storage is not being routed, because a router it could reduce performance.

  If you have VLAN 10(192.168.1.0/24) iSCSI, VLAN 20 (192.168.2.0/24) ESX

  MGMT and VLAN 30 (192.168.3.0/24) comments VMs and VLAN 40 (192.168.4.0/24)

  vMotion a deployment scenario might be something like:

  NIC1 - vSwitch 0 - active VMK (192.168.1.10) MGMT, vMotion VMK (192.168.4.10)

  standby

  NIC2 - vSwitch 1 - current (VLAN30) guest virtual machine port group

  NIC3 - vSwitch 2 - active VMK1 (192.168.1.10) iSCSI

  NIC4 - vSwitch 2 - active VMK2 (192.168.1.11) iSCSI

  NIC5 - vSwitch 1 - current (VLAN30) guest virtual machine port group

  NIC6 - vSwitch 0 - MGMT VMK (192.168.2.10) standby, vMotion

  VMK (192.168.4.10) active

  You would place you on VLAN 10 storage with an IP address of something like target

  192.168.1.8 and iSCSI traffic would remain on this VLAN. The default value

  gateway configured in ESXi would be the router the VLAN 20 with an ip address of

  something like 192.168.2.1. I hope that scenario help set some options.

  Tuesday, June 24, 2014 19:16, vctl [email protected]>

• Unable to connect to the internet with the NETWORK card and Windows Millennium Edition.

  Hello

  I turned on my old computer yesterday, who has installed Windows Millennium Edition. At the back of the computer is an Ethernet port which is marked as LIEN ACT. The NIC with this port is Realtek 8139 PCI Fast Internet Adapter. I spend two hours on the Internet configuration and I did and finally got connected, but then, a few hours after, something went wrong and the Internet and the NETWORK card has stopped working! And the card has disappeared from the Device Manager, but he's still showing in network in Control Panel. I opened the computer and I reconnected it to the slot, but it did not help. At the back of the computer next to this port are two LEDs - green indicates the power that lights up when I plug the Internet cable and the other orange indicates actual connection. But now these two LEDs are not indicating something even when I plugged in the cable to the Internet, which comes from my router. In the computer a Dial Up connection PCI is installed too, but I disabled it. I used Dial-Up in 2002. So, I need help.
  But I know that I can connect with this Ethernet card to the Internet because it worked for 3 hours, I've loaded the pages and downloaded programs.
  Please don't point, should I upgrade Windows!
  Thank you.

  Hi friend,
  You can try a Bing search on connectivity to Win ME, I don't know there are still a few old sites that are not taken down you will find a few FAQ on.
  I saw not a ME machine in too many years to count!
  Good luck on your adventure.
  B Eddie

• VMware device with 2 network cards claiming the same IP address with two MAC addresses

  Hello.

  I see messages intermittent my gateway network two MAC addresses associated with a virtual machine running on a 5.5 ESXi host for the same IP address.

  The virtual machine is a MiTel 3300 controller for a VOIP system. the system is configured with two IP addresses, one on the local network and another with a public IP address in the DMZ. In the network configuration of the 3300, I assigned the address LAN IP at 00: 0C: 29:30:B2:B2 and the DMZ IP at 00: 0C: 29:30:B2:BC (Mac for network devices presented by the ESXi host virtual machine).

  On the host, I configured a vSwitch with exclusive access to two physical network adapters on the host machine. The vSwitch is configured with two machine virtual port groups, LAN and DMZ, with access to the physical network interface cards. Tab grouping of groups vSwitch port NIC, I replaced the order of failover of the switch to activate an active NETWORK card only for the Group of LAN ports and the other card NETWORK only for the DMZ port group. (I don't know how the content of the column of networks is determined. Neither is correct for the traffic on the physical switch. If these are configurable, please advise and I'll change the settings). The relevant parameters of vSwitch, groups of ports and VM are distinguished below.

  On the virtual machine itself, through the VMWare host, I assigned 00: 0C: 29:30:B2:B2 for the Group of LAN ports and 00: 0C: 29:30:B2:BC to the DMZ group port (best I can tell, anyway, since the MAC address field annoyingly obscures the last two digits of the MAC address - break if I invert the mapping) (, but all seems OK).

  The goal here is to make sure that MACs of ports vSwitch the 3300 is listening and sending always correspond to the physical ports that are VLAN Tag by the physical switch to ensure the routing. Generally speaking, it seems that what is happening but, intermittently, we cross one-way calls that suggests a problem of routing between us and our SIP trunk provider; coinciding with these incidents, I get an email along the lines of "the security in the network device has detected a conflict of IP address with two or more devices. The period of INVESTIGATION "DMZ. DMZ. DMZ. DMZ' is claimed by the following clients with MAC addresses: ' 00: 0C: 29:30:B2:B2' ' 00: 0C: 29:30:B2:BC'. »

  I did something in the configuration that would lead to this kind of collision intermittent? Have a hacked together a way to do something that could be accomplished in a way that is simpler and more reliable?

  Thanks for any idea that you can offer.

  Kind regards

  J.

  

  

  

  I probably don't fully understand your configuration, but it seems that you are not interested in using the collection of NETWORK adapters in the virtual switch of the VM MiTel 3300.

  If it is correct, why not create two virtual switches, each with a group of port (LAN and DMZ) unique and with a separate connection of (vmnic2 and vmnic1)?

  In general, collection of NETWORK adapters may be used to share traffic between uplinks and ensure that if one of the uplinks connect fails, a virtual machine still has access to the network.

• 5.1 ESXi management no connectivity network with two network adapters connected

  IBM H chassis equipped with blades HS22

  Blades use Broadcom 5709 s dual gigabit NIC

  ESXi 5.0, system worked very well with both NICs connected (static IP) in network management parameters (able to ping in and out). Completed the upgrade to ESXi 5.1 preserving VMFS datastore. After the reboot, management network shows two NICs connected to static IP always assigned but I have not any (impossible in our out ping) network connectivity. If I disable one of the network cards and restart the management network, I can immediately ping inside and out.

  I took a spare blade and tested by passage of 5.0 to 5.1 and 5.1 installation clean, the two producers same results. A host with two active network cards 5.0 (if static IP or DHCP) can ping inside and out. A host with two active network cards 5.1 (if static IP or DHCP) can not ping in our out. 5.1 host cannot obtain DHCP address, but fails to APIPA.

  I found the problem. For some reason, both switches must be actively connected on the same network for observed networks provide correct information for the collection.

• My old iphone 6s is completely broken, it does not or registry that it is connected when plugged into a computer. I'm able to recover photos from the SIM card with an adapter USB SIM card or through any other way?

  My old iphone 6s is completely broken, it does not or registry that it is connected when plugged into a computer. I'm able to recover photos from the SIM card with an adapter USB SIM card or through any other way? I also do not save anything with AllAccess, icloud, or through my computer as you would with a digital camera.

  The photos are not stored on the sims, sorry.

  You can always try the Recovery Mode, little to lose at this point. If it doesn't, I suggest taking it to an Apple Store for testing.

  Recovery mode:

  Turn off your iOS device.

  Plug charge cable to the computer only (not to the device yet).

  Open iTunes on your computer.

  Hold the button to power on your device and do not let go.

  Plug the cable into the device while keeping the power button.

  Wait for the computer to detect the device and wait that he eat.

  Restore as New first, then restore sauvegardΘ if you wish.

  https://support.Apple.com/en-us/HT201263

• I just changed my internet provider and can connect with two of our cell phones, but the third said no identified network/no access to the internet.

  I just changed my internet provider and can connect with two of our cell phones, but the third said no identified network/no access to the internet.  I tried all of the obvious solutions.  Windows 7

  Original title: unidentified network

  Hello

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, you are having problems with the unidentified network error message.

  Perform the steps from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/network-connection-shows-that-it-is-connected-but/52e60042-2666-4EAF-80be-193b26db10be

  Answer to us if you are having problems with the unidentified network or any other issue of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• ASA with two internet connections

  Hello

  I want to connect an ASA with two ISPS for internet traffic, one for the VPN S2S, there is a router VPN dedicatet on the second link.

  In case of failure of the first link, the second must be enabled.

  route outside 0.0.0.0 0.0.0.0 10.20.20.1 1 track 1route backup 0.0.0.0 0.0.0.0 10.20.30.1 254
  
  route backup 192.168.0.0 255.255.0.0 10.20.30.1
  
  Is this configuration working?? 

  Hello

  You need to configure the 'als' monitor configuration to monitor some destination on the main IP address ISP for the ASA whether the connection works. Probably an IP address on the public network.

  SLA 1 monitor

  type echo protocol ipIcmpEcho outside interface

  NUM-packages

  timeout

  frequency

  SLA monitor Appendix 1 point of life to always start-time now

  You will also need a configuration related to 'track' of the order

  track 1 rtr 1 accessibility

  Route outside 0.0.0.0 0.0.0.0 10.20.20.1 track 1

  Backup route 0.0.0.0 0.0.0.0 10.20.30.1 254

  The above combined with the routes you mention should be enough about the delivery. Naturally for each remote VPN L2L network you will always need a specific static route on the SAA to the backup ISP device.

  Also you must naturally maintain the translations on the SAA. Seems that your ISP links have in mind a separate device that contains public IP addresses. So am I right in assuming you pass all traffic from the LAN links for links to PSI via the ASA without any type of NAT, and leave these routers from the private to the public NAT?

  -Jouni

• URGENT! Two physical network with two subnets completely - no bridges - interface cannot connect both

  This is my urgent problem:

  I have a physical machine with two physical network interfaces. I have a VMWARE player and a virtual machine that must use cards on two different subnets, a public directly to the router and an intranet within the company.

  How can I just say a net card to go on this submarine and the other on the public void?  Go crazy. Help, please.

  Thank you

  P.

  Use the virtual network editor VMware Player, create an additional bridged VMnet and bind each bridged to a different physical network... card VMnet on a virtual machine, create a virtual network adapter on each subnet and bind each virtual network adapter to an another VMnet jumpered.

  For additional help with virtual network Editor, check this KB: VMware KB: using the VMware Workstation virtual network editor

• When I click on to develop, a blue rectangle appears, with two lines connecting opposite angles.  I was able to get a picture in this window.  Can anyone help?

  When I click on to develop, a blue rectangle appears, with two lines connecting opposite angles.  I was able to get a picture in this window.  Can anyone help?

  Hello

  Please open Lightroom and click on Preferences.

  Once the preferences window opens, go to the performance tab, and please make sure 'Use graphics processor' is unchecked.

  After unchecking the option restart Lightroom, and it should deal with the issue.

  Please let me know if it helps.

  Kind regards

  Tanuj

• Issue in RPD with two pools of connections

  I created a RPD with two pools of connections for OBIEE 11 g
  
  and created two business model
  and two field in the presentation area
  
  I am able to update the data and the number of lines in the physical area
  
  but after the deployment of the RPD
  in the responses to the second topic I get error this table or view does not exist

  If the details of connetion for the connection pool is not even then you must create physical database objects 2 and then to create pools of separate connections under him...

• Connections of graphics cards

  On a new installation of the graphics card I must "...". connect the two 6-pin PCI Express powerconnectors. "my diet provides one such connector... should I use and connect the other end by the adapter combined with the motherboard? Would appreciate any guidance of the more enlightened.

  Hello

  You will need to use one of the dispatchers of PCI - E Y 6 pins as a second source of power for your video card.

  Your diet has 4 pins molex connectors to use with the Y-splitter to spare?

• Satellite A500 - 15 M: unable to connect to the TV with HDMI

  Hello

  I have a Satellite A500 - 15M. I recently tried to connect to my TV so I could watch certain shows online on my Hannspree Xv HD ready TV.
  The HDMI out does any record on the TV - the TV displays a message "not supported" and remains off (as if there is no signal) - display settings on the PC it does not recognize the TV... actually it [Intel Graphics and Media Control Panel] indicates that the TV/monitor settings are not supported.

  But I can connect via the VGA output - although I have to delete the display settings to 1024 x 768 to show on TV. In addition the display on the TV then is mainly pink and red, even if my pc display peak is most often blue. -start of the Toshiba screen displays on the TV, without any problems and one or twice the login screen was displayed too much, but then sometimes it isn't...
  I know that's not the VGA cable as I can connect to the TV with it on netbook advent my wife without any problem.
  Are there drivers, I need to update / download? Or I need to change the settings?
  How can I get my screen on my TV?

  Any help would be greatly appreciated. Thank you

  Hello

  First, you must connect the two machines (laptop and TV via HDMI) when the two devices are turned off. After turn on the TV and the laptop.

  You must choose the HDMI on TV channel and should then use the FN + F5 key combination to switch the video output to the TV.

  If this does not help, try updating the graphics card driver.
  It seems that your laptop supports the Intel graphics chip. Therefore, you can see the Intel page for new drivers.

  Welcome them