Connected but no internet access? ... Help

Similar Questions

• loss of internet connection on windows 7 pro 64. Says connected but no internet access with yellow exclamation point! Help, please!

  I keep losing internet connection, I have windows 7 and every time I connect it to the wireless internet works for 5 minutes, then a little ytellow icon pop up and say its connected without internet access. Its happened to me before and recently started happening to my cpu. I did a FRESH install of windows to see if it can help, but it didn't. IM literally on the point of throwing my processor through the cause of wall, I can't find a solution to this anywhere. Whenever the yellow icon pops up that I have troubleshoot and it indicates the default gateway was unavailable and that fixed it, then I have internet again for about 2-5 minutes and it does the same thing. Ive never had this problem on my cpu and the network has not been changed or anything, so I don't know what that the * could cause this. I literally wiped everything on my cpu and then do a system image to restore too. Ive been messing around with the registry, deletion of things here and there missions that I read, but only thing that happens is losing internet alltogether and must restore from system image. I'm really running out of ideas. Help, please. I have an adapter netgear wn311b wireless pci-express with the latest drivers.

  to detect new updates for network based components on intel:

  http://www.Intel.com/p/en_US/support/detect/?IID=subhdr+dnlds_detect

  You will be asked to download and install active x components.

  After the installation of the small file, click on the "expand all" button

  You can choose to update your components wired network if necessary.

  then re-install your wireless network management software.

  assuming that your wireless network is intact (connected, permits), you can surf the net.

  If the problem persists, troubleshoot more away:

  When the computer is turned off, set again you netgear pci wireless adapter.

  set of antenna for optimal orientation.

  Check if your computer is authorized by your wireless router.

  check the signal strength of your wireless router and the wireless pci adapter.

• Wireless connected but no Internet access

  I have a new (5 months) Acer Aspire 5732Z which works in Windows 7. Wireless connection shows that it is connected (full bars) but I have no internet access (there is a signal of yellow exclamation over bars error). I have another laptop running Windows XP which connects well to the same wireless router and wireless for Acer worked very well so far. I was on the phone with my ISP and they said, because it shows that the computer is connected to the wireless, they cannot help me. Anyone has any ideas that can help me?

  Thank you. I decided to call my Internet provider again and this rep was able to solve the problem without delay. From what I learned, if you get a representative who was not helpful, call again...

• Satellite A-C50-1KQ - WIFI is connected but no Internet access

  Hello!

  Today, I bought a laptop TOSHIBA SATELLITE of C50-A-1KQ and my problem is:

  When I am connected to my Wlan status says I'm "connected" to the Internet and everything is ok, but I don't have an Internet connection. With a cable, everything is ok, but not with Wlan.
  My driver for the card is 10.0.0270 (17.10.2013).

  Can U help me pls?

  Siana

  When you open option networks make sure airplane mode is set to OFF, Wi - Fi on IT and I guess that your WLAN is also in the list.
  You have the signal full force and the State connected?

  What happen when you try to open a page in the Web browser?

• Equium P200 status 'connected' but not internet access.

  I have an Equium P200 and finds it difficult to connect to a wireless network.

  I have the wireless key and all the information is correct.
  Status is connected to the network, but I have no internet access and the message is: connection to the local network only.
  I live with two other people who have access, but I can't access the internet.

  How can I change this?
  Thank you.

  Hello

  Please check in the WLan settings if the TCP/IP protocol settings are set to automatic.

  Usually, the WLan router supports a range of IP addresses and assigns an IP address to the laptop of the range of IP addresses.

  You can find this setting here:
  ->-Connection network WLan-> properties > network connections (TCP/IP) Internet Protocol-> properties

  Also, check if your WLan encryption settings are right!

• Connected but no internet access (E1200 with laptop Acer Win 7 x 64)

  Whenever I come back from a stay in a motel, there are problems to be connected again to the House.  This time, I show that connected to the network wireless 2, but no. Internet access connection.  Yesterday, I figured it out and got things, but today it happened again and I don't get it.  See network properties properly, including appropriate security key.  When I ran Win 7 Network Diagnostics, he returned that I didn't have a valid IP address.  I have reset the router and even unplugged for a minute.  All this time, the ' currently logged on: "network in the sys bar icon showed the Summit he was trying to connect my network name to the internet (downstairs, the network showed as connected, probably by a router).  Another thing I did was to support IP services and disable and stop, then after restart it a few minutes.  Nothing.

  But wait!  As I finished typing the last sentence, about an hour after I started the laptop, the first time, I opened center network & sharing once more and suddenly between the name of my computer and the Internet has shown the name of the network, instead of "no internet access."

  So, what could be going on here?  (1) why should he take 50 minutes to make the connection?  (2) why do I have problems every time after the use of wireless network from a motel?  Thank you

  Update: resolved for now.  I started using the safe mode with networking, which required the implementation of msconfig as F8 does not work.  Which required a repair of the system, and then restore it, and finally I was able to follow the instructions at http://forums.techguy.org/networking/950031-cant-get-valid-ip-address.html.  Solved.

• Ethernet or wireless is connected but no Internet access

  My laptop OS is Win 7 64 bit. My laptop able to connect to the internet, but it suddenly can't connect to the internet via the Ethernet or wireless. I tried to system restore and it worked fine, but after I stopped, the problem was took place again. I don't know if because of the McAfee antivirus or window updates because it has some errors (to McAfee) and Skype has been updated before I had this problem (no internet access).

  McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

• Strong wireless connection but no internet access

  I am able to connect to the internet via a cable modem, but when I try to use my wireless router I don't get access to the internet none despite the excellent signal strength. My information on the two devices match. I can pick up other signals fine just not my router wireless.

  2010-06-17 13:51, primer McCapps wrote:
  > * I am able to connect to the internet via a cable modem, but when I
  > try using my wireless router, I get a no Internet despite
  > excellent signal strength. My information on the two devices match. I have
  > can be challenging other wireless signals very well just not my own router.*
  >
   
  What do you mean by "information"?
   
  What do you mean by "just not my router? Do you mean that you do not have
  see same SSID of your own router (network name) in the list of available
  wireless networks? If so, connect to your router with an Ethernet cable,
  Enter the router configuration utility and make sure that the SSID
  broadcast is set to 'enable '. If your router is already configured to
  broadcast its SSID, and you don't see it well be able to see the other
  near wireless networks, the portion of your router wireless is
  cut or broken.
   
  Generally, symptoms such as you describe are caused by a defect of
  to authenticate to the router, usually due to a mismatched
  password encryption.
   
   
   
  --
  LEM
   

• WiFi connected but no internet access

  Good so far, didn't have any problem with internet on my mac mini.

  It connects to my ADSL hotspot and mobile phone, but I can't access the internet or browse.

  In Network Diagnostics it says "internet - failed" and "Server - failed".

  These connections work on my laptop and mobile.

  I tried several times to change the DNS, reset the modem and fiddling around with everything I can that could possibly help without result.

  I forgot to add that the internet is perfectly fine in recovery mode

• T510 - wireless question - connects to the local network but no Internet access

  Hi all

  I have a laptop Lenovo T510 with Windows 7.

  Network adapter: Intel Centrino Advanced - N 6200 AGN with the version of the driver 13.2.0.30.

  I am facing problem seroius in wireless connection at home, I am able to connect wireless instead of office and friends.

  Wireless Networks are detected and I can connect to WiFi by the way of the key. And the status is indicated and is connected but no internet access.

  Please help me to get this resolved.

  Thank you

  Pavan K

  Thank you all for your support and your help... its working fine after re-starting the router

• Satellite L455-S5045 laptop Realtek8187B wireless 802. 11b / g connects to a d-link router, but not internet access.

  PC laptop Toshiba Satellite L455-S5045, Realtek8187B wireless 802. 11b / g connects to a d-link router, but not internet access. go to google.com and States page cannot be displayed, I ran diagnostics and reports, everything is configured properly. the wireless signal that d-Link has is 802.11n with a WiFi Code and running XP, I have WIN 7. Do I need to driver 802.11n, if I do, why I can not download it

  Hello

  To help you better, please answer these questions.

  1. don't you say no Internet access in the notification bar?

  2. what diagnosis you have to run?

  3 did you do changes on the computer before the show?

  To solve your problem, try the provided items.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can check the link:

  Troubleshooting Wizard

  Reference (my computer can not connect to Internet)

  http://support.Toshiba.com/support/troubleshootSelfService?PRDTYPE=computers

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• 8 win having address IP & gateway, but not Internet access

  This laptop is IPv4 address 192.168.1.13 (valid for my setup) and gateway 192.168.1.1 (even), but no Internet access? What is going on??

  I've implemented a number of victory 8 machines, but this laptop that I just got and win update 8, now, will not connect to the internet?

  All my other machines, phones, computers, iPad, android tablet, all to connect to the router and have internet access.

  I searched this problem and tried a few suggestions to no effect:

  1. drivers of device updated for lan and WiFi and restarted and still NOGO!
  2. has run a few commands cmd for ipconfig

  What is going on??

  Thank you very much for any help you might be able to provide!

  -Brian

  Brian

  Please download this app from the
  Run it
  Download output to a drive or any file sharing service
  Put a link to them in your next post
  Please enter each of them in a command prompt high after you run the above and save the file

  ipconfig/flushdns

  ipconfig/registerdns

  ipconfig/release

  ipconfig / renew

  NETSH winsock reset catalog

  NETSH int ipv4 reset reset.log

  NETSH int ipv6 reset reset.log

  Output

• My computer says I am connected but my internet says cannot display this Web page

  Vista connection problem

  I have windows vista Home premium. my computer says I AM connected but my internet says cannot display this Web page. This isn't the site because I tried other websites

  Hello, Scottyookiss00,

  Launch IE without Add-ons

  Start > type Internet Explorer

  Select Internet Explorer (No Add-ons)

  You are able to access the site now?

  If so, reactivate the modules one by one to determine the origin of the problem.

  Try the steps here:

  http://support.Microsoft.com/kb/956196

• IPv4 and IPv6 connectivity says no Internet access

  My computer says that it has access to the internet but when I use a browser it does not work. Also Ipv4 and Ipv6 connectivity says no internet access, and at the launch of the troubleshooting, it indicates that the DNS server is not responding. So there are a lot of problems.

  Hello

  Internet works with IPv4.

  I can't give a targeted response as you have not provided technical information on how you connect to the Internet and devices that are involveved.

  In general.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  It still does not work, try this too.

  Firewall software.

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall Windows Firewall should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly, or uninstall it completely allowing the clean flow of traffic on the local network. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Reset the network stacks .

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  Do the same process to refresh the TCP/IP, just replace the command typed with.

  netsh int ip reset

  Restart the computer.

  Jack, MVP-Networking. WWW.EZLAN.NET

• My wireless connection says "no internet access.

  Original title: Network question

  Hello
  I noticed a change in my system. My wireless connection says "no internet access. The other connection, presumably one wired, is OK.
  I have no problem on internet and computer my son who is temporarily connected to the same router is also online.
  But I wonder what can happen to change that, and what I can do about it. I noticed this when a little yellow exclamation point appears on the network icon in the systray /taskbar.

  I spent a lot of time with the guidance of the internet, Cisco install CD, ipconfig and its switches, update drivers for the network adapters, uninstall the card network wireless and relocation, etc.. But the situation remains the same.

  I will link to some images what I mean (hope it works).

  Thanks a lot for your suggestions.

  Jack

  https://SkyDrive.live.com/redir?RESID=BF9482F6B726F60C! 133 & authkey =! AMKjZQs1wxoJ6ac&ithint=folder%2c.png

  Hello methacrylate.

  Yes, you are right. See my response to PML. I guess I got both wireless and ethernet capability all along and didn't understand why.

  (My system is a desktop computer).

  But the problem is solved.

  I appreciate your response.

  Jack