connecting fax HP 6500

Similar Questions

• Cannot receive faxes officejet 6500 wireless

  Hello

  I suddenly have problems to receive faxes. Alone was able to cross over early today, and as I understand it, it took 8 minutes to my fax machine to connect. I get error reports saying type is "received" and result in "error 244 *.» I tried instructions support on the HP site, and those who, unfortunately, were not very useful. One thing, I thought may be useful was turning power switch on the ECM - however, it is not all the instructions to do it on my model!

  I have the HP Officejet 6500 Wireless

  model E709n

  Running Mac OS 10.7.4

  My Fax is on a separate phone line: it's a VOIP line I've had for quite some time

  Any help is greatly appreciated! Thank you!

  Take a look at the link below, you will find a resolution hopefully:

  http://support.HP.com/us-en/document/c01661987

  Let me know if you need additional assistance. I'm here to help. Thank you!

• New installation on windows 7 pro 64-bit sees not connected wired Officejet 6500 E710a-f

  Hello!

  New installation of Windows 7 Pro 64 bit on a gigahertz 3.40 AMD Phenom II X 4 965 with 8 GB of ram. Printer drivers worked on the same bench while he was running as Windows 7 Pro 32-bit.
  After only install FF, AVG, and Acrobat (almost a clean install), downloaded the software HP Officejet full feature and pilot 2012-10-22, Version: 116,98, 28.8 M - OJ6500_E710n - z_1315.exe and tried to install the Officejet 6500 E710a f.

  The printer has a manually set static IP and can be ping from the host. Clean Windows Firewall is disabled and stopped.

  The web interface using the IP address of the printer comes with all the features works on FF.
  Network status shows connected with IP address, hostname and Mac.

  However, when installing the network audit is no ethernet connection. Even manually enter his public static IP address or hostname does not solve the problem.

  Try the USB, the same question option. I see in Device Manager under other devices HPOfficejet 6500 and 6500 HPOfficejet - Fax with a blue questionmark.
  (In the same "other devices" there are 2 Officejet 6500 with a yellow exclamation point - probably from failed network installation).

  In the printers and devices window, the 6500 is displayed with the correct thumbnail, but with a yellow exclamation point icon. Law and by selecting the convenience store, Windows comes up with the message that no driver is installed and offers a solution.  The correction ends with the error that no drivers not found for the FAX. Re-apply the patch never finds the driver.

  Anyone who has met something similar (and a solution)?

  Thanks for any help!

  Jack

  After trying to do an install clean-install of 100% and once again, the driver software could not find the printer name or IP address.
  Back at each stage, I noticed that I was not using the correct driver! For some reason I D/L the pilot E710n which is for HP Officejet 6500 a Plus e-All-in-One.
  Whatever the difference, when installing the E710n for the model does not detect the printer, or via USB or Ethernet.
  After you download the right driver for the E710a - f HP Officejet 6500 a e-All-in-One Printer (OJ6500_E710a - f_1315.exe) installation perfectly finished in a few minutes and everything goes well...

  You would think, base or USB connectivity network should not be dependent on the specific differences sub-model. I was expecting that a bad driver interrogate the device after finding its IP address and display an error message with useful text.

• Automatic reception of faxes on 6500 a

  When you receive a fax on my 6500 has, the display requires that I accept the printing of b4 Telec.  How can I change this function so that a fax will print automatically?

  Hello mk88

  To proceed, it would be best to try to identify the problem. Since it worked correctly in the place that you have moved since the change would be the place. I see that you have checked the ring both the signal with your provider. If at this point, I would say that to find a friend or a member of the family with an analogue line to test. In this way, we can see if the printer is automatically in response to an analog line.

  You can also check the settings of the cable operator once more. I know sometimes things may change without notification.

• JO HP 6600: HOW TO RESTORE MY COMPUTER TO CONNECT FAX ON MY HP 6600 JO

  HAD AN ICON THAT SHOWED 6600 FAX IN MY DEVICES AND PRINTERS.  HIS PARTY!  HOW CAN I GET THAT BACK?

  Hello

  HP USB would be the best way to restore it.

  Install the driver of HP Universal Fax below:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7529320 & swItemId = ds_146586_2 & swEnvOid = 4192

  Send a print driver for universal Fax HP, Watch dialog box, select your printer and check the box to add a queue for her, once the fax a Fax - HP Officejet 6600 queue will be added.

  Kind regards.

  Shlomi

• Can send faxes on 6500, but not receive them.

  Test said that I need different telephone cord. Went to Best Buy and they said it's amazing how I can send. It used to work when I had Vonage, but now I switched to Comcast phone home and it won't work.

  Don't like to hear you're seen this issue with your fax. Best Buy reps do their best, they have 1000's of products to know...

  If you do not use the cord supplied HP (which is a 2-wire cord) or the fax hardware test indicates you are not using the correct cord, then we need to purchase another fax machine (fax 2-wire cable) cord

  If the cable you are using is a cord 4-wire (you can tell by the 4 pins on the end) then you will have problems of fax... The extra 2-wire 4-wire cord can cause interference.

  Also... you mentioned that you have changed carriers... If you have a voicemail service active this will disrupt your incoming faxes... There is no work around, you MUST turn OFF your voicemail to receive faxes.

• Windows Server 2008 fax and scanning... .cannot connect fax modem

  Hello

  I am running Windows Server 2008 R2. Recently, apparently after you install some automatic updates when the server unexpectedly shut down several weird errors are produced on the machine. First to be noticed was that faxes were more to be received. While they inspected more, the fax service had stopped working and could not be restarted, such as the Windows event log. After searching for some time, a solution was found here: http://social.msdn.microsoft.com/forums/en-US/windowscompatibility/thread/c75ae899-d05b-411d-a7f2-00fdd33b8589/

  Fix Subinacl.exe described in the post didn't work, but deleting a corrupted windows journal file did, and the diary of events and fax services would begin again.

  I thought that my problem was resolved, but the fax service is still broken.

  Trying to set up the server to receive faxes with Windows Fax and Scan, once more, as he had done very well before, I came across another error. What the first implementation account fax by following the Wizard launched by selecting "new fax" for the first time, or through the tools-> accounts-> options for adding fax, the mistakes of the wizard with this message: "there was an error in setting up the account. Please contact your administrator. " After reviewing several other forums (this issue has been much more difficult to find information on then the first described error), this solution seemed to be what has pointed out several positions:

  http://www.Vistaheads.com/forums/Microsoft-public-Windows-Vista-print-fax-scan/50649-fax-account-Wizard-error-2.html

  This solution involves deleting the registry keys for accounts via regedit. I tried this, and it did not work.

  It doesn't seem to be that much more that I can do. I was ready to try a restore of the system on the server, but apparently there were not a restoration of recorded images, even if this isn't an option.

  Are there any other fixes documented for this?

  Hi JaredGohr,

  I suggest you to send your requests in the link for better support below.

  http://social.technet.Microsoft.com/forums/en-us/winserverprint/threads

  I hope this helps.

• Windows XP Pro does not connect to a 6500 printer (ethernet only)

  I have the printer doesn't work for Windows 7, Ubuntu 10 and Mint 10 but after you run the HP Wizard on the XP machine, it will not see printer. I tried to connect via printer IP and host name using the tip box. I can ping the address of the printer from the box XP and all actions to and from the work of XP box very well.

  Any thoughts?

  Thank you

  yellowpike

  OK, your anitvirus software have a firewall?  Disable it and retest.  Make sure that WIndows is updated and that you have the latest version of the HP software.

  Download the latest version of the software, firmware, manuals, etc. for your printer from the "Support & drivers" link at the top of this page.

• Office Jet 6500 (All in One)-Modem, fax and phone on one line

  How to make connections of cables for that the 6500, the computer (dsl) modem and the phone can share one telephone line?  Instructions for the 6500 show must be connected directly to the phone jack and the other devices are then connected to the 6500.

  Would this work?

  a. telephone jack using #1 port on back on officejet 6500 connect.

  b. connect another line of port #2 to the rear of the officejet and divide it to modem and phone.

  Any help would be greatly appreciated.

  You'll forgive me explained is not setup and operation. When you receive a phone call, your answering machine will answer the call first. Once he does, the fax will listen to the call and hear fax tones. If she hears fax tones, it will pick up the call and start receiving the fax. If she does not hear fax tones, it leaves you alone the phone call. This is why the TAM must be connected to port 2 - EXT and the TAM to answer the call first the value.

• HP Officejet 6500 A Plus E710n: HP connected connection

  I want to configure the printer on a Hotspot of Straighttalk. Is this possible?  Message of the printer is that it cannot connect to the network.

  Want detailed instructions, like what would be given to a newbee.

  Hello @rhousman45,

  Welcome to the HP support forums. I understand that you want to connect your Officejet 6500 has more on a Hotspot.

  This would be very similar to the printer connected to a wireless network.

  Follow these steps to connect the unit to your WLAN 802.11 wireless network.

• OfficeJet 6500 709 a. Interference by fax.

  When you try to print from PhotoShop Elements, the correct printer shows (Officejet 6500), but the prints are sent to the fax (fax Officejet 6500).  Do I need to disable the fax feature (I don't use it more) or is it a problem with the software PhotoShop?

  Hello TZap,

  I don't know how to disable the fax on the all in one (or if it is still possible).

  However, this link seems to solve the problem you are experiencing. I wonder if the solution can help you as well

  Printing output always goes to fax | Photoshop Elements 9

• 6500 a plus does not connect again wireless router

  I have a new wireless router. I can not connect with the 6500 has more via the WPS button or PIN. I also tried such and pass phrase nothing helps. I know wps works because she works with other devices. What that other router settings should I watch. ?

  I tried to change to the WPA + WPA2 WPA2 security. Same result.

  Print network test says everything is fine but no IP address.

  Try channel 1, with security.    If no go, change in the router in 'mixed' mode, 20 Mhz only.

• OfficeJet 6500 problems in order to correct the fax number

  I tried several times some documents to a fax number.  This is the correct fax number.  When he composed it said connects, faxes THEN connected to an unknown number.  How can I fix?  I can't use my fax machine if I can't have connect the correct number.  I checked with the company I'm fax too and even if it is the correct number, they do not receive my faxes.  I called the number for which my faxes were sent, and it is a person at random.  Thanks for the help.

  Hi liwarren,

  I would like to help.  You can answer a few questions?

  1. Have you tried a hard reset?  Click here to see the steps to perform a reset.  That makes a difference?
  2. On the printer, under Setup , then reports, you will find a Printer Status Report.  Can you print the report (the report) and situation to give me the product # and the Version of the firmware of the printer?
  3. Find on the printer Setup , then Tools, Run the Test Fax.  If you select and run the test, all pass?
  4. HP has a number of fax for tests.  If you send a fax to him, and he is received, a fax will be automatically sent to you.  It may take a few minutes to receive the return fax.  If you send a fax to this number, what happens?  You receive a fax from HP?  The fax number is 1.888.473.2963.

• Cannot connect 6500 all in one

  I have problems connecting an Officejet 6500 has (Officejet 6500 E710n-z). It's on the wireless network and at one point, oh so momentarily seen iMac (OS X 10.7). I can't get my old macbook to see any longer either. The printer is on and connected and works with other computers in the House. I tried to install the software without him seeing the printer, which installed, but it will not always see it. I can access the printer via its IP address, but when I try to set up in this way (adding an IP printer using its address), it returns the error message

  An error occurred while trying to add the selected printer.
  client-error-not-possible

  Any ideas?

  Hello

  Please perform step your screen printer to print the below network configuration page

  Press the right arrow - icon - touch report Touch Network Setup page touch - key

  Please check the IP address and the name of the network to print configuration page

  To check the connectviity between the Mac and the printer

  Open the new web browser - type the IP address in the address bar and press ENTER, if you are able to open the printer in the Mac information page, then it means that the connection is established if not

  then click on the wireless icon resistance to the top right of your screen Mac computer - check what network name got the box, select the host network

  If the question presists then follow the step below

  Turn OFF the printer - turn off the router, wait a few seconds, then WE the first tower and printer router then

  Open window Print / Scan and do the step to remove the entries of the printer print and Scan below

  Press and hold CTRL on the keyboard, while holding the Contorl key, click the entry for the printer appears in the left pane of the print and Scan window - select Reset Printing System, entry printer everything will be missing in the left pane of the window for printing and scanning

  Then try to add the Hello multifunction printer in the print and scan window

  Open the printing and scanning

  (Click the icon Apple - system Prefeence - printing and scanning)

  Click on the sign more, wait a few minutes, you will see printer listed as Hello kind product

  Select it and then click on add

  Try to print

• Office jet 6500 a Plus: Office jet 6500 Scanner does not work on iMac

  I have a printer, scanner, fax Officejet 6500.  Before the update of my modem, printing and scanning wireless worked perfect.  After a new modem only the printer works.  Bought a USB cable to connect to iMac running OS - El Capitan.  Printer works fine but the scanner does not work.  I uninstalled HP applications, printer deleted from system preferences.  Restart the computer.  Reinstalled with the latest drivers and add printer in system preferences.  Printer works fine but still no scan.  During the call to the top of the scanner/printer in system preferences, I see two options, one for print and other to analyze.  Queue only appears.  Any suggestion would be appreciated.

  Hey @Tg2020,

  Welcome to the Forums of HP Support!

  I see that you are not able to scan from your Officejet 6500 a Plus e-All-In-One to your computer Mac OSX 10.11. I can help you with that.

  To resolve this issue:

  1. Unplug the USB cable from the printer.
  2. Click on your Apple icon, system preferences and printers and Scanners.
  3. Hold down the CTRL key and click on the image to your printer on the left side.
  4. Click on reset printing system.
  5. Click on the button "+" in the corner.
  6. Select your printer from the list.
  7. Click in the box next to and select your printer.
  8. Click on Add.

  At this point, you should be able to scan your printer wireless. If you are unable to do so, please let me know what happened following my directions and I should be able to help more.

  If it solves your problem, please let me know by clicking on accept Solution below my post. Also let me know if you have any other questions. If not, have a great day!