Connection e280v2 Sansa problem.

Similar Questions

• Satellite C660 - connection Wi - Fi problems

  Hello

  I have the Satellite C660 with windows 7 64 bit which continually lost the wifi connection. The problem has been compounded in recent weeks. It takes the point a is the only one to connect with a network cable.
  I updated the driver for the current version 1005.23.622.2011 without success. All our other laptop have no problem with the wifi connection.

  Can someone help with this problem of frustasting before I go out a buy a wireless dongle?

  Wayne

  Hello

  Have you noticed this problem with an adapter connected to your laptop computer or power supply battery only?

• I installed AVG 9.0 and now I get the following MSN Explorer pop up of message.__You are unable to connect to your e-mail server. There may be a problem with your Internet connection, or a problem with the mail server. Pleas try again.

  I installed AVG 9.0 and now I get the MSN Explorer pop next message.
  You can not connect to your mail server. There may be a problem with your Internet connection, or a problem with the mail server. Pleas try again.

  Sure.  Analysis of your e-mail anti-virus program:

  • Can slow to receive and send messages, or even fail.
  • Can damage files of storage for messages that you've already sent and received, making it inaccessible messages.
  • Is not necessary.  If you receive an infected attachment and try to open it, the protective device in real time of your antivirus program will block the infection.

  Here are a few web pages accurately:

  Why you don't need your anti-virus program to scan your e-mail
  The other threat email: the Corruption of files in Outlook Express
  Why some antivirus software can change the settings in e-mail programs
  Email scanning - advantages and disadvantages

• I can not connect my sansa fuze to my Vista pc. __

  I can not connect my sansa fuze to my Vista pc.  It works on XP. Apparently looking for a driver.

  Check with San Disk.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  See you soon.

  Mick Murphy - Microsoft partner

• connection with e250 problems

  Hello world! I am completely new to MP3 players, I say that from the beginning, but I am a member of several forums, so I don't know how it works.  I recently bought a refurbed e250 and seem to have problems. I have read the forums for about 2 hours now, but still to come in white, it is so why I write.

  Read here and looking at the back of my drive, it seems that I have a V1. When I connect to the computer, all I get is the pop for 'Autoplay - (L) Removable Disk", to collect my computer is not recognizing my drive.

  Reading the forums that I saw several times change my player mode MSC or MTP mode when the connection, but I do not have these options. When I go into my settings, I have 2 USB modes listed; USB - HID, which, if I get that I have the option of YES or no. Mode USB keyboard, which, if I go home, I have the multimedia Mode options, presentation Mode, Mode or browser or mouse. I went through all that and still get the same pop up on my pc.

  I also read to switch my player to lock (the button next to the headphone jack) and hold down button rewind connecting to the pc force in fashion, and that does not work either.

  I read also to switch to lock, press and hold the record button during the connection to reset the player, and that doesn't work anymore.

  I mention also, Rockbox installed on my drive there.

  I downloaded the firmware driver, and is not fimd my player either.

  Of course, that my drive does not work, I am able to listen to music, I can also listen to music on a memory card. I was not able to display photos or videos on my drive but. If I insert a video on my player, it will play sound but not video.

  So after all it hits, someone has another option, I can try to get my pc to find my drive? Oh yes, I've tried different USB ports as well as with no luck.

  If I leave it to the experts, can someone connect?

  The burning question here is the factor of Rockbox.  Gere most readers see some bizarre information in your message, especially if they are not Rockbox running.

  USB functionality has always been a little unpredictable when Rockbox is at stake.  For awhile, the player has been implemented to start in the original firmware for USB connectivity.  I have a lot of hours with original firmwares, but Rockbox is a bit challenging for me, because I spend the lion's share of my free time to work with the original SanDisk residing in my players code.

  The drive works normally when executing his own?  It seems that you are running in Rockbox.  Was the player shipped to you with the generation of Rockbox responsible?  If Yes, this is the first time I've heard.

  Your best solution is to consult the available user, as well as forums, rockbox.org Guide, the guide is a huge 170 pages , or so, last time I saw it.  The link for the guide to the left of the linked page.

  A word of wisdom is apropos on Rockbox forums, however.  They seem to have taken the phrase RTFM to heart (Note, this is a family forum, once you learn the etymological details of the acronym, you will notice that once you look in the mirror, your hair will be white like Charlton Heston in the ten commandments.)  I saw posters a bit reprimanded for asking what is obvious, but it is quite welcome here for several reasons.  Every day, I learn something that makes me feel Newbie all over again.

  I am convinced that, as some versions of Rockbox default USB via the 'OF' (secret word, which means the original Firmware in Rockbox circles), and others may 'dual boot', which means that you hold it< button="" while="" the="" sansa="" powers="" up,="" to="" start="" in="" the="" of. ="" again,="" this="" may="" or="" may="" not="" work,="" depending="" upon="" the="" build="" installed="" on="" your="" device. ="" batteries="" not="" included,="" and="" your="" mileage="" may="" vary,="" as="" they="" say. ="" the="" latest="" rb="" (rockbox)="" builds="" do="" have="" usb="" support="" if="" i="" read="" the="" forums="">

  Yet once, start in the OF can not work as I've described, but a search for 'dual boot' in Rockbox forums should help you.

  Rockbox looks like a lot of fun and there are enough stable ports (as they call it) for the most recent Sansas in the works, but personally, I think that a v1 e200 will be the ideal device to try it soon.  I've just been so busy with the latest machines...

  Uninstall Rockbox is also described in the linked site, and it can be reinstalled at will, you do not have the opportunity to bring your e200 firmware stock 01.02.18 or the 01.02.24, because it is much simpler to operate than with Rockbox, especially when learning how to operate the drive.

  Don't panic and pull the strings too harshly, for lack of a better term; all this will give is a knot tight to unravel.  Search the site for RB on the connection of your device, it will be in the user's Guide.  Perhaps some of the Hards to die here running Rockbox will have a time to chime!

  I am currently tinkering with the latest version of the Rhapsody customer.  Rhapsody has branched out on his own from RealNetworks and there are a lot of little details in this mixture.  I'm the last customer, it performs well its gait with the penetrating RhapPFS Sansas.  I got some errands injectors (Diesel) to build a TDI engine today, so I'll run, experimenting with injector of programming, but I'll pop in now and again.  As many projects and the Sun came out today too.

  Bob

• connection app store problem

  Hello. We are in Iran and we cannot connect to the app store on our idevices. What should we do to solve the problem.please my question answer.

  Best regards!

  What exactly is your problem? I guess mine is the same

• Connection network Mobile problem

  IPhone problem 6 (without lock supplier):

  the phone loses the connection to the mobile network and cannot reconnect more - although in the coverage area of the network. remains in status "Searching" or "no network". Sometimes the settings menu-> carrier disappears as if it were locked provider.

  you have any ideas on the cause of root?

  Troubleshooting of the measures already taken, which do not solve the problem:

  -Restart the phone

  -extract and insert the Sim Card

  -change the SIM (same vendor as a different vendor)

  Troubleshooting steps already taken, that solves the problem temporarily (problem recurs after 3-5 days):

  -reset settings network (settings-> general-> reset network settings)

  -Erase content and settings

  -reapply full of iOS (using recovery mode and iTunes)

  rkopezky wrote:

  IPhone problem 6 (without lock supplier):

  the phone loses the connection to the mobile network and cannot reconnect more - although in the coverage area of the network. remains in status "Searching" or "no network". Sometimes the settings menu-> carrier disappears as if it were locked provider.

  you have any ideas on the cause of root?

  Troubleshooting of the measures already taken, which do not solve the problem:

  -Restart the phone

  -extract and insert the Sim Card

  -change the SIM (same vendor as a different vendor)

  Troubleshooting steps already taken, that solves the problem temporarily (problem recurs after 3-5 days):

  -reset settings network (settings-> general-> reset network settings)

  -Erase content and settings

  -reapply full of iOS (using recovery mode and iTunes)

  That said your carrier for you do not have access to their service?

  is your iPhone carrier supported carrier?  Support of carrier wireless and features for iPhone in the United States and Canada - Apple supported

• iPod connection and synchronization problems classic160GB

  I have a well taken in charge iPod classic 160GB. Worked perfectly until...

  Since the upgrade to the latest OS (iMac), I've been prone to random error when updating of my music. Essentially (1) the device is still connected and there is no apparent way to perform a good ejection process (2) and synchronization fails after many hours and don't care only about 100 songs.

  Thus, it seems that the iPod is ok mechanically. I have reset the device and formatted the HARD drive. This allowed then the synchronization process works correctly. Yesterday I downloaded the songs on the iTunes store and wanted on the iPod - same problems error has occurred.

  Would it not make sense to go back to an earlier version of the operating system? and iTunes? (same iTunes appears unstable now...)

  I see that this timing issue is quite common with this unit holders and it seems to be common, because support was arrested for this camera - I'd be cynical? Why isn't Apple in the face of what it comes to very bad reputation management - total contempt for Affairs of its user base?

  I always use what is apparently a good piece of hardware, but I'm extremely frustrated as a user. Any body found the corrective action? If so, what is it?

  LAST: I left Apple and bought a Sony HD camera. Why? as a result of these frustrations. I'm now evaluate whether to consider other Apple devices that are close to replacement (viz, Ipad, MacBook Pro (17 "), iMAc) with non-Apple devices. This is how frustrated and I'm in a bad mood.

  Please, if you know a solution, I am very willing to try that.

  Problems with synchronization is often caused by a hard drive which becomes unreliable.  Hard drives are mechanical and ends by fail, computers and iPods.  I have much older iPods (4th gen, 3rd generation and iPod mini) that are more than 10 years at this point.  They still work perfectly fine with the latest version of OS X and iTunes.  I replaced the fragile hard drives in three of these iPods with Compact Flash card or an SD card on an adapter.  For the 5th generation and later iPods, you can look here for more information

  https://www.iFlash.xyz/

  I see that this synchronization problem is quite common with this unit-holders...

  It's not just 'common good' considering there are millions of iPods (with storage on hard disk) still serving there.  However, if you see more cases of these days, the reason is obvious.  They age, on average.  The iPod classic model was released back in 2007.  Old things tend to start fault for various reasons, including defective hard drive.

• HP ENVY 17-j005tx Notebook PC: network card wireless Intel N 2230 sporadic but recurrent connection Wi Fi problems. Which driver to use?

  I have an old HP Envy computer of 12 months with a 2230 Intel® Centrino® wireless-N wireless adapter.

  In the last 6 months, the PC has suffered sporadic but recurrent problems of WiFi connection with the failure of the connection or drop-outs. The PC connects to the router, but fails to obtain or maintain an IP address. It has been with Intel driver version 15.12.0.6, pilot day February 25, 2014, installed by Windows Update, on June 16, 2014.

  When I contacted HP support on January 9, 2015, I have been instructed to download the software from the HP Web site. This driver has an HP publication date of 1 November 2013 and installed the driver version 15.10.0.12 with a release date of June 25, 2013.

  Updated Windows ran later that day there and I wanted to install the drivers updated Windows 8.1

  • Important update - update the Intel driver for Intel® Centrino® wireless-N 2230 published on 17/10/2013, 2.4 MB
  • Optional update - update the Intel driver for Intel® Centrino® wireless-N 2230 published 07/10/2014, 101.9 MB

  If Windows Update has been set to automatic the provided HP driver would likely have immediately deleted by Microsoft update.

  The Intel Web site offers the 15.14.0.1 or 15.14.0.2 driver version as the last driver for the adapter N-2230 but Intel "recommends obtain you and use the software provided by the manufacturer of your laptop. (even if it's more than a year to date)

  It's very complicated to have the latest version on the Intel site, older versions installed by Microsoft Update and even older versions on the HP website.

  If the user must install the OEM version, how the user to treat Microsoft Update overwriting the OEM version?

  Which driver should be used?

  Why didn't the driver software HP Support was updated to resolve known issues with this wireless card driver?

  HP would provide only a pilot who has been tested on the device that is installed on a particular type of material.

  Intel would release the driver first, but then it would take some time for HP to the test pilot and release it to the public for use on their units. Some customizations can apply in order to get the driver to work on the material.

• After years of using firefox, is suddenly not connected to the internet. Internet Explorer connects without a problem.

  I use a WIFI connection and have had no problem for many months. All of a sudden, I get the "problem loading page"; "Firefox can't establish a connection with the server. MS Internet Explorer works fine.

  My firefox is the same as everyone elses, firefox made help ever read these strings or simply hope their users figure out on their own?

• Satellite L50-B-1GL - connection WI - FI problems

  I bought a Toshiba Satellite L50-B-1GL

  I'm having problems with the WiFi signal reception, I found that it is that in this book because I have an another older toshiba and receives the signal also correctly correctly receive the signal in the cell, the problem is with this laptop, low signal of a Bay and up to two or three at the most, sometimes gives even me the message that there is no sign , do not work with the battery, I am plugged into the mains.

  Please can you help me, or I have to send for repair.

  Thank you.

  Message has been translated

  Hello

  I think you have some connection problems Wi - Fi because that card LAN of the laptop that is Intel 802.11ac + agn supports WLan standards (AC, A, G, N) probably there is a problem of compatibility between the router and the especially WLan card if the WLan router has been configured for 802.11 B or G only.

  If you want to establish the WiFi connection, you must ensure that the road and the wireless network adapter supports the same WLan standard.
  For example: the router + wireless network card must be set to 802.11 A or G or N because these standards are supported by the WLan module.

  For the wireless network adapter, you will need to check / change the settings in:
  -> WLan card device manager-> properties-> Advanced tab

  On the Advanced tab, you'll find settings and options that must be controlled and configured.

• Satellite L40 - Wi - Fi connection after restart problem

  Hello

  My sister had a Toshiba Satellite L40 (PSL40E - 04501DDU) and a few days ago I installed a wireless router at home.
  Wi - Fi worked within 2 minutes, but when I restarted the laptop he couldn't find any Wi - Fi networks (whereas before I restarted, I found 4).

  It took me about an hour to make it work again
  -Turn off/on Wi - Fi
  -several reboots
  -deletion of a Wi - Fi connection - configs
  -switching between Vista Wi-Fi-tool and without configuration by Toshiba
  -updated drivers
  -etcetera...

  I don't know which of them did the trick, but after going through all these actions it seemed to work again.
  I thought I had conquered the problem, but only today (after only 1.5 days) my sister contacted me saying that the Wi - Fi 'fell down' again.

  Does anyone know what could be the problem?

  When I look in this forum I see about 1200-forum topics on the problems of Wifi on Toshiba laptops, so I guess it's a recurring problem with several models of Toshiba.
  Most of the subjects also speaks a Wifi works very well and doesn't work anymore after restart/sleep/hibernation.

  Laptop: PSL40E - 04501DDU
  OS: Windows Vista 32-bit (latest updates + latest drivers)

  (Please, no answers like: "is your DHCP on?") or "the router is compatible with the Wi - Fi device?")

  Hi crazysoul,.

  I understand that you don't know the answer to that, because you are not always there when the Wi - Fi fails, but if the laptop is not looking upwards * all * networks, the same as before?

  What WLAN driver version is installed on this laptop? The most recent is 7.6.0.164.1, it can be interesting to update. Also, forgive me if you already checked, but under network adapters Device Manager, find the device wireless and in the Properties window, if there is a power management make tab you unchecked the checkbox to turn off the device to save power.

• Connection to computer problems

  I can't regularly use internet explore, only 64-bit, I can also not connect to Skype or MSN because of a "connection problem" but I tried to connect my internet on different computers and programs work very well.

  I have troubleshooted, played a bit with the firewall settings and I've also changed internet providers but always encounter the same problem. When I got to my laptop that I could use the normal internet Explorer and I managed to connect to Skype a couple times but then something happened and now it cant.
  Can anyone help?

  We are unable to discuss on this path.

  What model of laptop do you have?
  What operating system do you use?
  Are you using the original preinstalled recovery image?
  What connection are you using (LAN/WLAN)?

  For a better understanding, send us more info on your mobile and connectivity.

• Wireless - connection Portege 4010 problem

  I have a 4010 Portege (PP401A-024FMP), who refuses to connect through the mini pci wireless lan card. It identifies when there are wireless networks autour, but does not connect. I even created my secure and open wireless network to see if it was a security issue nothing works.

  The laptop is running a new copy of Windows XP SP3, including relevant drivers from Toshiba Web site.
  In addition, I also tried a fresh copy of Ubuntu 8.10 to see if it's XP causing the fault - Ubuntu do not connect any.

  There is no problem in (XP) Device Manager wireless card is faulty even if it displays the wireless networks?

  Any help is appreciated!

  Are you sure that's not because of false settings on your router?

• NB200-10Z connection external monitor problems

  Hello

  I tried to connect my NB200-10Z to my LCD TV using a VGA - DVI connector. Now, I have connected my DVI cable into the socket, then the TV.

  For some reason any TV is not recognized by the netbook. I tried the FN + F5 key and it only shows the lcd - associated with the netbook screen.

  I thought that maybe I need an update of the display driver, but it seems that I have the latest version (6.14.10.4926)

  Rebooted the system, no effect.

  I used to have my other laptop connected to the TV before, so the problem must be with this netbook.

  Any idea?

  Enjoy your thoughts...

  See you soon,.

  Richard

  Are you running XP or Windows 7 starter edition? With Windows XP, right-click on an empty spot on the desktop and click Properties and click the resolution tab and there you can set the second monitor, sometimes you need to use the icon next to the clock that is the video properties intel to extend the monitor...

  If you are unning Windows 7 Starter it does not support the extended monitors only mirrored...

  HTH,

  The f