Connection is disconnecting remote desktop continues

Similar Questions

• Error message when you try to connect to the remote desktop

  I got a set up for a while - Remote Desktop connection, but yesterday, my power is out, turn off my computer while I was on it.  Now, whenever I try to connect to my remote desktop I get the following error Message: "unable to load the ActiveX control terminal services."  Make sure that c:\windows\system32\mstscax.dll lies in the path"I use Windows Vista.  Any help would be GREATLY appreciated! :)

  Hi Kit_b25,

  Try to run the system ("sfc/scannow" command) File Checker. More info...

  Ramesh Srinivasan, Microsoft MVP

• system restart when connecting to the remote desktop

  Hi team,

  I have a system and we mainly by using Remote Desktop connection... We are facing a question like: -.
  Suppose that a person take system through MSTSC, and after some time, if someone else will try to take remote desktop that PC even on this weather system will restart and then only another person will be able to access...
  I did some troubleshooting steps: -.
  System analysis but no virus detected...

  You could someone help me on this...

  Kind regards
  Narendra

  do you want to say that restart the computer, or do you mean that the current user is disconnected when a new user enters the new user credentials.

  If you mean the user is disconnected, keep in mind that XP pro only allows a user to be active at a time.

  Take the example of computer B, computer A and computer C.

  computer A is that B and C are trying to connect to via MSTSC.

  first computer B connects to A loggs, then runs a program. 10 minutes later computer C attempts to connect to A, and loggs on. If the credentials of the user are different from those used by computer B, will be disconnected the session on A and C will start a new session. This means that all of the programs that were running will be closed during the disconnection process.

  the way round, it would be to use the same newspaper on computer B or C on computer A credentials, anything could happen would computer B may be disconnected, and computer C would take control of the session if all running programs should continue to run.

  the other option would be to have all programs running as a service on computer A, but it really depends what you have found computer has to do.

  I hope this helps.

• Connection problems with remote desktop connection

  Good somehow I try to connect to my remote friends computer and it has a windows 7 and I already configured on his computer. I already forwarded Ports on his computer, his static IP, added exception to the firewall, including Norton Internet Security Firewall 2013, so his remote desktop connection is good. But my computer is a Windows Vista Home Premium, but somehow, it wont let me connect it keeps telling in a dialog box with this error:

  Say this 'Remote Desktop disconnected"
  "Try to connect again. If the problem persists, contact your network administrator or the owner of the remote computer.

  But it's is not my friends computer problem, its my computer, I would have never been able to use Remote Desktop on my computer, I have no idea why. I also configured with my router Embarq EQ 660 - R in the NAT rule SUA Port 3389 with my routers IP. But somewhere in my firewall, it doesn't let me use the same TCP 3389 port, it won't let me enter any number of his strange. Well, I have the screen shot a photo so I'll attach the image so you can see what I mean. But I already have my friends computer sent a static router IP configured on him and on his router port everything worked fine, but the problem is mine, don't let me not the port before my router only if I use the NAT option and entering into the rule of SUA, in which I made with port 3389 , and my default gateway static IP.  I also added an exception to my Windows Firewall and also my Norton Internet Security firewall, 2013 including the application, but still somehow, it does not work. On my router, if I try to put the port range: 3389 to 3389. Added the name of Service like RDP, Type of Service: TCP. Also, I made my public computer static IP a little go. A how's my friends computer it works

  Thanks I would really appreciate it

  Hello Cristian,

  I understand that you can not connect to connect to the computer Windows Vista Home premium to Windows 7 computer using remote desktop.

  I wish to inform you that you can not use Remote Desktop connection to connect to the remote computer (host) running the following editions of Windows Vista:

  ·         Windows Vista Starter

  ·         Windows Vista Home Basic

  ·         Windows Vista Home Basic N

  ·         Windows Vista Edition Home Premium

  You can also view the below article for more information.

  Remote Desktop connection: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions#EI

  Connect to another computer using Remote Desktop connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-another-computer-using-Remote-Desktop-connection

  I hope this helps. If you have problems of Windows in the future, let us know and we would be happy to help you.

• Keeps disconnecting remote desktop

  I use remote desktop to 'exploit' my laptop from my desk, when I'm at home.  When I had Windows XP, it worked flawlessly.  Now that I am on Windows 7 Professional (laptop and desktop) is true.

  When I run the desktop connection remote desktop it conscientiously connects to the laptop.  I will then use the DRC to work on my laptop.  I use the DRC in full screen.  I can (and often do) go to work on my laptop via RDC on my desk (check personal emails, etc.), and then return to the DRC (and laptop).

  Periodically, the DRC becomes inadmissible.  I can move the cursor, but I can't select or click on anything whatsoever.  If I move out of DRC and then again, I get a black screen followed a message box that says that the DRC has lost the connection and attempt to reconnect (1 of 20 tests).  Still, he reconnects on the first try.

  Some days it will happen one or two times, but today it happened about 5 times in 2.5 hours.  The disconnection may happen when I use Outlook, Excel, Word, Internet Explorer - in other words, I don't see a pattern when that happens, he is simply.

  I searched the forums for that, and while others seem to have this problem, no one has a solution that worked for me.  Some responses suggest firewall problems, but because most of the time I can connect and use it, I'm not sure that the firewall is the problem.  In any case, the two computers using the standard Windows Firewall and are on the same network behind the same router.  Both allow the DRC in the firewall.

  Under XP I never had this kind of 'random' disconnects.  In Windows 7, I get throughout the day (with enjambements more some days than others).

  Anyone have any suggestions on how to fix this?

  The wireless signal goes directly to another machine, or obtain other machines via a wireless router?

  Have you seen this?

  " When I reduce the desktop connection dialog box remote, my screen becomes white. .

  Using a password protected screen saver can cause this. Not to reduce Remote Desktop Connection dialog box if you have a screen saver password protected, or not to use a screen saver password protected. »

  The problems of desktop remotely
  http://Windows.Microsoft.com/en-AU/Windows-Vista/troubleshoot-Remote-Desktop-problems

  http://www.Google.com.au/search?q=remote+desktop+troubleshooting+Windows+7&SourceID=IE7&RLS=com.Microsoft:-to the: IE-address & ie = & oe = & redir_esc = & ei = ukogT87PLe7EmQX0g8iyDg

• Cannot disconnect remote desktop background user

  Running 3.8 remote desktop. My clients usually run 3.8.5, and all have an Admin account I can connect without disturbing the user.

  Host computer running OS X 10.11.4, clients are on a variety of versions of the OS.

  Recently, I started getting the following message when you try to log on to this account Admin:

  The account that you selected is not available.

  Check your network connection and try again to the user account. If you are connected to the network, ask your administrator to help system.

  If you click on the OK button, which is the only button available, you are listed on the desktop of the admin account. This leaves you stuck in the Admin account. I don't like it in abeyance.

  Has anyone seen this error before?

  It seems to be a new problem with the 3.8.5 update. Returning to 3.8.4 on the target mac resets the connection.

• I have problems connecting to the remote desktop on Windows Server 2008.

  I have many positions of work XP trying to connect to our servers to Server 2008 Remote Desktop, but get the message, "because of a security error, the client could not connect to the remote computer".

  When I check the version of remote desktop it uses, it is 5.2.3790 in program Files\Remote Desktop

  Now, if I go to Windows\System32, I find mstsc.exe and can connect to the same server perfectly.  But if I go to save the connection, RD is up to version 5.2.

  How can I remove the old version and just use the newest one?

  Thank you.

  Original title: a different version of the remote desktop

  Hi msenior,

  Thanks for posting your query in the Microsoft Community.

  Method-

  I would have you post your query in the TechNet Forums because it caters to an audience of it professionals.

  Your query will be better addressed there.

  Check out the link-

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  We know if you need help. We will be happy to help you.

  Thank you.

• Can I use windows RT to connect to the remote desktop on your desktop of windows 7?

  I want to use the function to my surface of microsoft remote desktop to connect to my home computer while I'm in college. Anyone know if this is possible?

  Hey there,

  The short answer is, if you want to remotely connect to your PC using your Microsurf, then Yes. If you want remote connect your Microsurf using your PC, then no..

  If you need assistance with details, so let us know.

  Hope that helped,

• By connecting to a remote desktop at the top of the entire screen except the ip address so dark. Help!

  I use my remote desk top.  After entering the password ect.  It puts me in but the screen is black.  I can see the IP above, but there is no button to start or do anything.  How can I fix this.  Can someone please.

  Thank you

  Sheila

  Hi Sheila,

  You can check the following links and controls if you can solve your problem:

  Troubleshooting specific remote desktop problems

  http://social.technet.Microsoft.com/forums/en/w7itprogeneral/thread/70276a19-6972-4f9b-B852-663b0b279df3

  Hope this information is useful.

• I can't connect to the remote desktop through VMWare on my windows vista with IE9.

  I need to set up a remote desktop access in a remote installation. I got an ID and a personal password to access their desktop remotely, but I can't get to the portal clinet vew VMWare server. I am able to set up access on my other computers with windows XP IE8. and Windows 7 IE8, but not windows Vsta IE9. I tried to download enhanceie.com/dl/IE8v.reg but when I click on the icon to access the portal I get a «Cannot find the file specified...» meeage "does anyone have a solution to this problem?

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Vista on Technet. Please post your question in the Technet forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/category/windowsvistaitpro

• Windows 7 Clipboard stops working when it is connected to the remote desktop

  The two machines are Windows 7 SP1 with the latest updates.  Remote configuration is configured with the selected share clipboard.  The Clipboard works on the host machine until the remote desktop is started.  The Clipboard of the remote computer works without any problem.  Clipboard on the host machine starts working again when rdpclip.exe is interrupted on the remote computer.  If rdpclip.exe is restarted on the remote computer, the Clipboard of the host machine then stops working again.

  I had similar problems with Clipboard in the past, but getting the two machines on a fixed day.  It seems more recent updates have created a new problem.

  Hello

  Thanks for posting your query in Microsoft Community.

  The question could arise if the process is damaged and should be revoked on the remote computer to restore operation. I suggest you to try the following steps on the remote computer and check if the problem persists.

  1. Open Task Manager (right click taskbar and select Task Manager)
  2. Go to the process tab
  3. Select rdpclip.exe
  4. Click on end process
  5. Go to the Application tab
  6. Click on the new process
  7. Rdpclip type
  8. Click OK

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• VPN connection to the remote desktop

  My company has recently introduced a new VPN system for remote access to the desktop. The old VPN worked well with my computer at home. Now I thought that "Critical Patch KB2115168 must be installed" in order to connect remotely. Many other patches were also shown as being mandatory. My company seems unable to solve this problem that many employees know when they attempt to connect remotely with the office. Please notify.

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://social.technet.Microsoft.com/forums/en-us/winserverNIS

  It will be useful.

• Use FTP fails, disconnect remote desktop, XP Pro

  Windows XP Professional SP3, Application in VB6 using WinInet FTP, remote access from Windows 7 to XP pro.

  I had problems with one of my VB tasks.  It has worked fine for years and now is a failure because it downloads only the partial files FTP.

  It seems to have started failing after May 22, 2012.

  A symptom that I can reproduce, is that when the FTP task attempts to run he hit me offline my Office remotely.  Sometimes the FTP download works, sometimes files are truncated.

  Hi WWS_SS,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  I hope this helps.

• Home network works great, remote desktop will not connect.

  I have a Windows 7 laptop and a Vista laptop. They are connected to a secure wireless network. Both work very well as standalones. When I try to connect via Remote Desktop or connect with each other. My 7 is in a homegroup with a single name. My Vista is in a WORKING group with the same name. I can't connect either using remote desktop. Computer for both names are names of a single word, 'XXXXXX', not the format xxx.xxxxx.xxxx and I can't figure another way to their name. I spent 2 days serching various tech forums and tried what they suggested.

  Hello

  Homegroup is a unique feature of Win 7. It uses IPv6.

  As you connect to Vista you must configure Windows 7 to the home network.

  ------------------------------------

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  ------------------
  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Remote Desktop connects then stops after a few seconds

  I have two laptops to Windows 7.  We run OpenVPN which I will refer to the VPN server.  The other is the Client and with me on trips.  Open VPN is configured on the Client and the VPN server, and I can connect from inside and outside the network without any problems.  I also have an Open VPN Client with another port configured on a server QNAS.  I can connect without any problems.

  I want to run the OpenVPN server on one VLAN separated to prevent users to see my internal network and only sees another NAS.  I also use the VPN to offer our few users (3) the ability to connect and use my static IP address.

  I have a router TP-Link-ER-6120.  I can configure the three ports to run in 3 separate VLANS.  When I configure the VPN server works on my regular network to exploit the VLAN1 and VLAN2, I can always connect to OpenVPN and all I want to do works (NAS and Internet access with my static IP).  However, when I try to establish a Session to the VPN server computer remote desktop, I get the login and enter my user name and password.  I see the remote desktop window, open and usually see the remote desktop wallpaper and loading the desktop icons.  Then it crashes.  If he does until I can see the desktop, it automatically attempts to reconnect.  If she makes it that far, it stops with a window that says Remote Desktop connection has been disconnected.

  If I come back in the configuration of the router and change the configuration of VLAN for the server VPN is on the same virtual network, I can connect and the remote desktop connection is successful, as long as the customer is located on my network.  If I connect the Client to the VPN server from outside my network in this configuration, the remote desktop will always fail in the same manner described above.  I also have a QNAS on my network with OpenVPN configured and operational.  If I connect the Client computer to the QNAS, I can connect to the VPN server until the VPN server is placed in its own VIRTUAL LAN.

  Thus, work Desktop connections to local computers.

  However, since a remote off-grid remote office connections begin to work, but are stopped when connecting.

  -J' I ping the VPN server during connection attempts and never lose the connection.

  -J' used telnet to Server VPN 3389 port and it connects.

  -J' turned off the firewalls on both sides and went up to remove Symantec on the VPN and BitDefender server on the side side Client to use Windows Firewall on both.  And then disabled Windows Firewall as well and still no joy.

  Is there a setting in Windows I'm missing that allow the desktop connection remote on the LAN, but not enable during login remotely even if I can ping, telnet and usually access the rest of the network?

  Is it maybe a configuration problem on the side of the router?  Installation side route is a very simple graphic interface.  I configured for the VPN service roads and they remain in place (one for the QNAS) and one for the OpenVPN server.  I set up a static route (virtual server) for port 3389 go directly to the IP address of the VPN server, but that did nothing.

  Miss me probably something simple, but it launched my ass for weeks now.

  Any ideas?

  Hello Michael,

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  By the description, I understand that the problem with remote desktop connects and then stops after a few seconds on the system.

  Certainly, I understand your concern and will try my best to help you.

  To get more information about it, we have a dedicated forum where these issues are dealt with and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the best support.

  http://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.