Connection lost to ctl

Similar Questions

• Windows Mail telling me connection lost and unable to receive emails.

  original title: How can I receive emails?

  I have Vista home basic system. I use Windows Mail to receive emails. Use for at least 5 years. Recently I get the error message saying my connection lost. Cannot receive emails. I can send.

  It could be your ISP server is on the fritz or your antivirus software has got the update and broke things.  Check www.oehelp.com/OETips.aspx#3 and also check your account via webmail if you can to check what is not not a problem on the server side.  Alternatively, you can try to compact and repair the database to try and solve the problem (see www.oehelp.com/WMUtil/).

  Steve

• I work tech support for an ISP broadband. Get a certain calls lately from connectivity lost on cable connections.

  original title: Refresh TCP\IP Winsock

  Hi all

  I work tech support for an ISP broadband.  Get a certain calls lately from connectivity lost on cable connections (coax to modem, ethernet to the computer).  It seems that some of my old Dos standard TCP\IP troubleshooting commands are outdated.  Could someone please review and criticize the following sequence for accuracy?

  1. START | RESEARCH | ORDER -RUN as ADMINISTRATOR
  2. IPCONFIG/FLUSHDNS
  3. NBTSTAT-R
  4. NBTSTAT - RR
  5. NETSH INT REINITIALIS
  6. NETSH INT IP RESET ... Not
  7. NETSH WINSOCK RESET ... Yes

  Thank you!

  J. William (Bill) Hamill Esse quam videri

  WinSock and TCP/IP update.

  Win 7.

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  Do the same process to refresh the TCP/IP just replace the command typed with.

  netsh interface ipv4 reset Press enter

  netsh interface ipv6 reset Press enter

  ipconfig/flushdns press Enter

  Restart your computer.

  Win XP & Vista

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  The same processes to refresh the TCP/IP replaces the command typed with.

  netsh int reset Press enter

  ipconfig/flushdns press Enter

  Restart your computer.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• ORA-03135: connection lost contact for a single user only

  Hi gurus,

  I am puzzled to this problem, no one else is having problem connecting to the database except a user who always gets "ORA-03135: connection lost contact" when you try to connect to the test and Prod environment.

  Oracle@PATEST > sqlplus user@testDB

  SQL * more: release 10.2.0.3.0 - Production Wed Dec 23 13:21:08 2015

  Copyright (c) 1982, 2006, Oracle.  All rights reserved.

  Enter the password:

  ERROR:

  ORA-03135: connection lost contact

  Get the same error when you try to connect via EDIVIEW (application) or the prompt of commands or cygwin terminal directly.

  tnsping works fine and return connect credentials

  Here's what I did troubleshooting:

  1. make sure that the user is not locked in the database

  2. place the database restricted and provided this user mode access restricted and tried the connection as long as that user, not luck.

  3A bounced the listener

  4A rebounded from the database

  5. some online forums suggest to increase the timeout setting in sqlnet.ora, in our environment, we use the OID and the sqlnet.ora is the central directory. If this cannot be the issue that everyone can connect.

  6. I checked the sqlnet.log file and there seems to be no incoming connection from this user or machine.

  Information system and database

  Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64 bit Production

  Mna3dbts SunOS 5.10 Generic_150400-27 sun4u sparc SUNW, SPARC-Enterprise

  Any advice would be appreciated

  Hello world

  Thanks for everyone came, surprisingly, the problem is solved by simply changing the user password in the database. As soon as the password is reset, I was able to connect using the assigned user name.

• "Network connectivity lost" alert - how to find which NIC is it?

  Hi, we cluster with VCenter 5.5 HA and 2 X ESXi servers.

  Each host has 4 NIC

  One of the host's alert 'Network connectivity lost' that was triggered 02:00 in the morning. Is to verify that NIC is this anyway?

  The events tab says know as NIC.

  Any help would be appreciated, thanks.

  You should see some sort of event in the user interface and the vmkernal.log and vobd.log.

  
  

  VMkernel.log

  ~ #vmkernel.log | grep "link down"

  2014-11 - T 05, 20: 17:20.770Z cpu0:33263) netsched: NetSchedMClkNotify:2329: vmnic1: link down notification

  ~ #vmkernel.log | grep 'link up'

  2014-11 - T 05, 20: 17:33.314Z cpu0:33265) netsched: NetSchedMClkNotify:2321: vmnic1: link notification

  2014-11 - T 05, 20: 17:33.656Z cpu1:33411) netsched: NetSchedMClkWatchdogSysWorld:3786: vmnic1: bind an event received, device operating at 1000 Mbps for the adjustment of the depth of queue to 8646 bytes with bytes 131 expected / us

  2014-11 - T 05, 20: 17:33.735Z cpu1:32808) netsched: NetSchedMClkNotify:2321: vmnic1: link notification

  2014-11 - T 05, 20: 17:33.736Z cpu0:36689) netsched: NetSchedMClkWatchdogSysWorld:3786: vmnic1: bind an event received, device operating at 1000 Mbps for the adjustment of the depth of queue to 8646 bytes with bytes 131 expected / us

  ~ #

  ~ #vmkernel.log | grep "NIC link is Down"

  2014-11 - T 05, 20: 21:25.915Z cpu0:33267)<6>e1000: vmnic5: e1000_watchdog_task: NIC link is

  ~ #vmkernel.log | grep "NIC link is Up"

  2014-11 - T 05, 20: 21:41.660Z cpu1:33268)<6>e1000: vmnic5: e1000_watchdog_task: NIC link is up 1000 Mbps Full Duplex, flow control: no

  vobd.log

  Just did a test for you.

  ~ # tailvobd.log

  2014-11 - T 05, 20: 17:33.418Z: [netCorrelator] 620684191us: [vob.net.dvport.uplink.transition.up] Uplink: vmnic1 is in place. Affected dvPort: 5/a6 eb 07 50 28 7 b c8 5 a - a0 a6 99 e8 ad b 8, 95 6. 1 uplinks to the top

  2014-11 - T 05, 20: 17:33.418Z: [netCorrelator] 620684194us: [vob.net.dvport.uplink.transition.up] Uplink: vmnic1 is in place. Affected dvPort: 5/a6 eb 07 50 28 7 b c8 5 a - a0 a6 99 e8 ad b 8, 95 6. 1 uplinks to the top

  2014-11 - T 05, 20: 17:35.000Z: [netCorrelator] 622285373us: [esx.clear.net.dvport.connectivity.restored] network connectivity restored on DVPorts: ' 5/a6 eb 07 50 28 7 b c8 5 a - a0 a6 99 e8 ad 8 6th b 95', ' 5/a6 eb 07 50 28 7 b c8 5 a - a0 a6 99 e8 ad b 8, 95 6. Vmnic1 physical NIC is in place

  2014-11 - T 05, 20: 17:35.000Z: [netCorrelator] 622285495us: [esx.clear.net.dvport.redundancy.restored] redundancy Uplink restored on DVPorts: ' 5/a6 eb 07 50 28 7 b c8 5 a - a0 a6 99 e8 ad 8 6th b 95', ' 5/a6 eb 07 50 28 7 b c8 5 a - a0 a6 99 e8 ad 8 6th b 95', ' 5/a6 eb 07 50 28 7 b c8 5 a - a0 a6 99 e8 ad b 8, 95 6. Vmnic1 physical NIC is in place

  2014-11 - T 05, 20: 21:26.094Z: [netCorrelator] 853350673us: [vob.net.vmnic.linkstate.down] vmnic linkstate down vmnic5

  2014-11 - T 05, 20: 21:27.001Z: [netCorrelator] 854286718us: [esx.problem.net.vmnic.linkstate.down] vmnic5 of the physical NIC linkstate is down

  2014-11 - T 05, 20: 21:42.149Z: [netCorrelator] 869405317us: [vob.net.vmnic.linkstate.up] vmnic linkstate upward vmnic5

  2014-11 - T 05, 20: 21:43.002Z: [netCorrelator] 870287321us: [esx.clear.net.vmnic.linkstate.up] vmnic5 of the physical NIC linkstate is in place

  2014-11 - T 05, 20: 24:38.723Z: [netCorrelator] 1045972218us: [vob.net.vmnic.linkstate.down] vmnic linkstate down vmnic5

  2014-11 - T 05, 20: 24:39.000Z: [netCorrelator] 1046284854us: [esx.problem.net.vmnic.linkstate.down] vmnic5 of the physical NIC linkstate is down

  2014-11 - T 05, 20: 24:42.230Z: [netCorrelator] 1049478491us: [vob.net.vmnic.linkstate.up] vmnic linkstate upward vmnic5

  2014-11 - T 05, 20: 24:43.001Z: [netCorrelator] 1050286523us: [esx.clear.net.vmnic.linkstate.up] vmnic5 of the physical NIC linkstate is in place

  * Reminder to implement Syslog.global.logHost (software) advanced creation collection newspaper and magazine.

• ORA-03135: connection lost contact

  Hello
  
  I encountered the error: ORA-03135: connection lost contact if I let on during connection > 30 minutes (or so I think)
  
  I'm actually access the data through a dblink.
  
  Please indicate where I could check to see if it is a matter of settings
  
  TKS & rgds

  Hello

  Check the SQLNET. EXPIRE_TIME in sqlnet.ora on client-side, or when you connect from, and it is not set, then set it to recommneded in 9i

  For more information, see this document for 9i http://lbdwww.epfl.ch/f/teaching/courses/oracle9i/network.920/a96581/sqlnet.htm

   SQLNET.EXPIRE_TIME=10 
  

  Concerning

• Apple Store is not up-to-day - network connection lost

  Hello

  I have a MacBook Pro with OS X El Capitan installed and allows you to connect to the Bank of the United States, where I bought the laptop. I moved to the New Zealand a few months ago and changed the NZ store, and for the last two weeks that I'm not able to update the software through the Apple Store, I always get the message "the network connection has been lost", even if the network is OK:

  

  My account is active, no problem. I even "bought" a free app just in case and it's all good - I could add to my list of software and download it.

  Any thoughts on how to proceed?

  Thank you

  Fabio

  More info: I already followed the instructions to "If you can not connect to the iTunes Store - Apple Support.", everything is OK - no firewall issues, DNS or key ring...

• Internet connection lost of Airport Express

  I have an Airport Extreme bought July 2013 connected to a modem cable my ISP, Cox. I use an iMac running El Capitan. An ethernet cable to connect the modem cable to the Airport Express Terminal. Lately I lost my internet connection. I have set using the diagnostics of the network in the preferences, network, which brings me to restart the cable modem. That works, but it can last all day, or just for a few hours, and then I lose the internet connection. I called Cox Tech support and the guy said that as long as my cable modem lights remained on the balance, then it must be a problem with Airport Extreme. It also suggests to connect the modem cable directly to the computer. I have already happened up to 14 hours at a time and have not lost the internet connection. This leads me to believe that the problem is with the Airport Extreme. I can do about it before buying another Airport Extreme? Thank you.

  What is the brand and model of the modem provided by Cox Internet? Is this the same modem that you use when you first installed AirPort Extreme? ... and, if so, it has had problems before connecting or just started to happen as shown in your post.

• Satellite Pro U400 - network connection lost after suspend

  I have a Toshiba Dynadock. My network is connect directly in dynadock.

  When suspend my Satellite Pro U400 and after reboot to continue working I lost my network connection. Then I shut down my computer and disconnect/connect Dynadock I can continue working.

  What is the problem?
  Dynadock software version is 2.0

  Hello

  I see that you have switched from Vista to XP.

  First of all I recommend you update the BIOS.
  As I m not wrong on the European driver Toshiba page, you should find a newer version of the BIOS.

  You will need to upgrade Win XP to the last State.
  The XP must be up-to-date and all service packs, hotfixes and patches MS must be installed in your laptop.

  Access the Device Manager, and then score in each USB hub root, you must disable the option called allow the computer to turn off this device to save power
  You can find this option in the properties-> tab power management

• Internet connection lost when power is removed Probook s 4330

  HP probook 4330 s

  Windows 7 Ultimate + service pack 1 64-bit

  Driver: Microsoft 3.0.0.41 RALINK driver (up to date when I do a search)

  When I remove its internet external power is lost.  The wireless connection always seems to be in place, but there is no traffic.  I can't ping anything in this case.

  The only way to get this up and running again is to

  1. Insert the AC power

  2. restart the service dhcp client (sometimes required to conduct more than once).  The service has not stopped, but for some reason, it becomes it running.

  I also tried to disable the 'allow the computer to turn off this device to save power ".  But that did not help.

  Have spent a long period of problems, have almost tried everything and am at the point where I am considering the purchase of a new laptop computer.

  Kind regards

  Paul

  fixed by updating with the latest wifi driver

• TCP/IP, the connection lost?

  I'm talking with a supply of California Instruments MX15 using the TCP/IP protocol. I downloaded their GUI to control the power supply remote so I could familiarize myself with its operation. The user interface works fine without any connection problem. I'm now trying to make my own driver (the driver download that they provide on their site does not work) to control remote electric power. I have attached the VI that I try to send just the * IDN? command and query an answer back. If I can get this working, I have no problem to find the rest. However I tried to figure this out for the last day or two and nothing helped. I'm new to TCP/IP, but now I understand the bases because of all my google work many hours:

  I have attached my VI to watch. As you can see I tried to use the VISA function as well as the TCP service. The TCP function works fine without error returned, but returns nothing in the buffer and expires. The VISA function however opens communications on the electric network but when I try to send a command to the power it gives me this error:

  Error 1073807194 has occurred at an unidentified place

  Possible reasons:

  VISA: (Hex 0xBFFF00A6) the connection of the given session has been lost.

  Any help is appreciated, thanks in advance.

  You send a character of endpoint with MAX, but not in your VI. Don't forget to click with the right button on the constant and activate '-' code display.

  VISA server isn't essential.

• sudden loss of battery power, connection lost, lose all power from power supply disconnected, does not recognize battery

  I have a Sony VAIO & use the largest of the battery (extended life) since I bought it 3 years ago fighting.  I was always able to automatically switch the power supply of the battery by simply unplugging, or computer plugging in AC on leash.  And, I was always able to see the battery down icon to the left of the screen (taskbar) & it would show % battery remaining.  Now, all at once, as soon as the power supply cord is UN-plugged the laptop turns off completely, no reserve power at all & I can't find the info of the battery. anywhere on the computer.  Icon no longer appears in the lower left corner & when I go into the power settings, the "Battery 1" icon is grayed out, so it seems that the computer is not finding all the batteries.  It happened so suddenly.  Could battery comes essentially lost all its power & become non-existent to the computer, or is this a computer problem, battery not recognize.  Not sure if this puts some I can fix somewhere, or if I need to have a computer repair man to fix the real computer.  Please HELP, I am desperate to solve this problem, as a laptop does not really serve its purpose if it must be connected to the hard power all the time!  TX in advance for a help, suggestions.

  Yes, most things are cheaper to replace than to trouble.

  But if the laptop seems to work ok otherwise, he might just be easier to see if there is a recall on the faulty battery or if it is still under warranty.  In addition, sometimes you can add a little more memory to the old system and see some performance improvements

  on the other hand, replacement of the laptop can be problematic because the old machine has all the programs installed on it, registered product keys and has accumulated years of personal files.  and sometimes old expensive programs won't work on newer versions of windows.

  the argument would be to close the new machine on the standards you eventually accept.

  DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann

• Wireless connection lost after update

  Last night I downloaded and installed the February Patch Tuesday updates from Microsoft on my WinXP netbook. When I rebooted the computer, wouldn't my wireless connection. My other computer of Windows XP (not yet updated) worked very well. I did a restore of the system on the netbook for just before the updates, and now my Internet is back. No idea of what happened and what I should do next? I would like to install the security updates... Thank you!

  Thanks for the suggestion, Halima. I don't even think to look here so far, as I never received an email informing me that I had a response. What I ended up doing after the restoration of the system is to reinstall two updates at once. And this time everything went well. I still have no idea why I lost my wireless connection, first.

  JO-Anne

• Connection lost with printers in Linksys EA8500 (EA8500)

  I have a HP officejet 8500 a more printer

  my router previeus more than a day ago was great to work with the printer.

  Now on this new router and my printer keeps losing the connection to my mac cable

  Printer is wifi 2.4 GHz only (or wired = do not use for the moment)

  I booked an address of the printer, but still lost conection.

  I tried 20 MHz only = same result

  I've implemented the new connection to the printer = same results

  I tried Auto and g/f = only the same results

  I tried 2 channels = same results

  WPA2Personal

  same name as the old router

  Evertime I change something in the settings wifi it works then minutes can not find the printer.

  Please notify

  My IP address of the printer does not change when my computer can not find her pinter.

  I think that I thought about it.

  I reset the network connection to the printer. then used the configuration on the printer wizzard and his works always.

  If that was the problem so I blame this router Asus leftover junk that was in my printer.

  I tried the wizzard configuration before and used a static IP address.

  If you don't hear from me, the cure was = on the printer to reset the network connection.

  Also please can I have the menu advanced for this router?

  Not that I want to change anything, I'm looking for more information about the network.

  Thanks to you all!

• Internet connection lost

  All of a sudden I lost my internet connection to the access point and have been unable to rebuild.

  I use a WRT300-N router connected to a cable modem and my main desktop computer.  On the wireless network access point is a WMP300N installed Win XP HP Office in my Entertainment Center.   This set up has worked well for a few years with only few intermittent problems.

  The access point shows a strong signal of 270 Mbps or more, but the wireless connection on the desktop icon is showing "acquiring network address".  When I try to repair the connection Wireless using Windows, repair hangs indefinitely on the "acquisition of IP address.  Icon connection Wireless poster send but not receive data packets.  I think that the configuration is for an automatic IP address (from the DOS command ipconfig for function) and safety is PKP no WEP and that seems fine.

  The HP is an older model without the WZN function to automatically configure the wireless connection.

  I can't determine if the problem is with my network wireless LINKSYS or something in the computer with the establishment of a wireless internet connection.

  Any help is appreciated.

  Chris

  Honolulu

  Problem solved, an update of drivers for access to remote WPN300 did the trick for me.