Connection of the media to 24D3433DB
Hi people
First of all, anyone know of Toshiba support email?
I have the above TV which has WiFi and USB connectivity.
If I plug in a HARD drive in the USB port, I would be able to pick up all the media on this drive?
Thanks in advance
Bob
If I am not wrong it must be formatted in fat32 so that it works
Tags: Toshiba
Similar Questions
-
The problem arises when a Norton message requires a reboot. It does not get me beyond the point when Windows prompts for a password. The words appear on screen reboot problems ' Customer Service Group Policy has no connect. " "The media is write protected."
I cause the phone to crash in order to activate the Windows repair program. It works but the custody of Norton is disabled. A program Norton Repair heals so that the fault.
I had several chat sessions with Norton, but they now point me to Microsoft saying that it is a Windows program that is related to Norton.
Hi ColinAW,
Your computer is connected to a domain?
The question could be linked to the program Norton himself. I suggest you try the following steps:
Step 1: Disable Norton Security software; Follow the steps mentioned in the link below
Disable antivirus software
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Important: Activate security software once everything is done.
Step 2: The computer in the boot and a test
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
Continue with the remaining steps to pin-point on the third party service.
After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.
Important: n ' forget not the computer to start normal follow step 7 in the link.
If this problem occurs only updated Norton software, of course, the problem is related to the Norton software, and you can check with Norton again for any patches to address this issue.
http://www.Symantec.com/Norton/support/index.jsp
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I keep losing my connection to the Media Center on my D-Link DSM 750
I keep losing my connection to the Media Center on my D-Link DSM 750 when you try to view the video library. Music photos and everything else works fine?
Hi Ghostrider457,
Are a. When you facing this problem?
B. you get errors?
C. recent changes made on the computer?
Method 1
Try temporarily disabling the firewall/antivirus software and check if the problem persists.
Turn on the firewall / antivirus after you check the status.Method 2: new user account
1. open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.
2. click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
3. click on create a new account.
4. type the name you want to assign to the user account, click an account type, and then click on create an account.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
Try and tell us the result.
Bindu S - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think -
Xbox 360 will not connect to the Media Center after that PC has been asleep
My Xbox 360 connects to my Media Center as an Extender initially. When it works, it works very well. However, after my PC has spent time in a suspended state, it is at 75% chance that my Xbox won't be able to connect to the Media Center. Sometimes it will work, but more often it won't.
Restart my PC will allow the Xbox to connect immediately, but this isn't an ideal solution. I wish I could have my PC of a suspended state wake and correctly connected to the Xbox media extender.
Hello
(1) did you make any changes before the show?
(2) is the specific question when the computer wakes from sleep?
This problem may occur when the power is suspended in the media extender. I would have you go through the articles that might be useful.
Method 1: Tips for solving problems with Windows Media Center Extender Setup
Method 2: Windows Media Center Extender: frequently asked questions
Reference:
Set up Windows Media Center on the Xbox 360 (Windows 7)
Let us know if that helps.
-
I have to keep the center of the media on channel 3, and the decoder controls the channel I want to watch or record. For example if I want to record channel 631 21:00 to 23:00 I would say the MC to record channel 3 for as many programs they broadcast between 9 and 23:00. This process does not allow registration of the MC - guide as it was planned. I have to use the channels on the cable box only and always have the Media Center on channel 3. Is it possible to come back with the MC TV Guide and record by this guide as it was designed to do, while still using the cable set top box or some other Descrambler for replacement by the cable operator? Basically, the decoder is a decoder which makes us put all our TV on channel 3. But the cable ready TV I hear do not need the box, they can use another device. The computer can do the same? Nobody seems to have no answer to this problem. Help!?
I read your question. I asked you what happened when runningTV Setup and specifically want to know if the TV Setup detected your set topBox/decoder and it happened. If Media Center does not automatically detect your decoder,have you tried the manual method to learn codes? I'm trying to help youfeatures of Media Center EPG.You must ask the FIOS people if they have the equivalent of a DTAoffered in the world of cable and OTA.BarbMVP - Windows/entertainment and connected homePlease mark as answer if that answers your question -
I have a Windows 7 Media Center box, and an Xbox 360 that I use as an Extender. The two connections to the same wired router. Everything worked fine until I went on my old router (failed) and put in a WNDR4300. After the new router has been installed, I didn't have the Extender work then, deleted from the media Center and re - he added. It worked but after I shut off/started the xbox, no link. It is repetitive: I can make a new connection, but then it didn't reconnect after reboot of the xbox.
Check/change:
-J' changed to a static IP xbox
-There is no part 3 a / v or a firewall on the support center
-L' on the media center network adapter is 'home '.
-The network card on the media center * fact * show the xbox 360
-The event log after the xbox is restarted shows:
event ID 538: installation of media center extender does not like the Extender has been detected on the network, but for the Extender upnp search failed (timed out after 20000ms)
-How long before it, I have found that the service IS running upnp device host (and set to auto)
-J' checked 4300 router wndr and UPnP is enabled (advertising set to 30 minutes)
question, any ideas what configuration will solve this problem?
Hello
I suggest to look and ask here:
https://support.Xbox.com/en-us/browse/Xbox-360?XR=shellnav
http://www.thegreenbutton.TV/forums/
See you soon,.
J
-
Windows XP Media Center 2005 cannot connect to the Internet
Dear all,
I'm having a problem with Windows XP Media Center 2005. The problem is that when I connect the cable from the modem to the laptop, I only send packets without receiving. The IP address I get is also 169.254.207.207, which is not a valid IP address to connect to the internet, and so I guess that something is blocking the laptop to get the IP address. Another thing I noticed is that when I turned off the modem and restart it, I have connectivity maybe 5 seconds and then return to no connectivity.
You guys can tell me what is the problem, and if I have to download something but in addition to the internet so that I can get my laptop to work. That said, I can connect to wireless with no problems.
Thanks for your help and your time
Martyna
Hello
Sorry for the question but what modem did you mean?
A simple analog modem or DSL (broadband) modem that supports support a LAN connection.
If you mean the second then I would check the TCP/IP settings in the properties of LAN card. The settings should be set to automaticYou should also check that you firewall settings.
-
Mac mini as a media server connected to the hi-fi amplifier
Hello
I am considering a Mac Mini to replace my old Lacie Cinema player as my media center. It will be connected to television and, ideally, analog hi-fi amplifier for sound.
Here are my questions and special needs:
-want to browse my music library and control the Mac through my iPad or iPhone. Don't want to use the keyboard or the physical remote. Do something like plex installed on ipad control files that reside on the Mac mini (or external hard drive connected to the Mac Mini)?
-as my amp is analog (with RCA plugs) I guess I have to convert the RCA plugs to the digital amplifier. A Mini Mac USB RCA DAC exist?
I think that's it! Thanks for any help.
marcospt wrote:
Hello
I am considering a Mac Mini to replace my old Lacie Cinema player as my media center. It will be connected to television and, ideally, analog hi-fi amplifier for sound.
The Mac Mini are very small computers.
(for me, it almost seems like a waste to use as only a media center. I use my media center and an office at the same time)
-want to browse my music library and control the Mac through my iPad or iPhone. Don't want to use the keyboard or the physical remote. Do something like plex installed on ipad control files that reside on the Mac mini (or external hard drive connected to the Mac Mini)?
Not sure about this one. I am a user of office and control my media from there.
-as my amp is analog (with RCA plugs) I guess I have to convert the RCA plugs to the digital amplifier.
Everything you need for an analog RCA connection is a stereo 3.5 mm to RCA cable.
example > http://www.amazon.com/Dynex-Mini-Stereo-Audio-Cable
-
Hi I have a problem connecting to the internet. When I click on the internet it goes straight to windows media player.
HI Maria,
If you are using Vista, go to http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-windows-vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/ and scroll down to EXE and click or double-click it to run the program to restore EXE file associations. Once done, do the same for LNK entry. This should restore your programs and get the Internet icon to go to the internet rather than WMP. If you use Windows 7, go to http://www.sevenforums.com/tutorials/19449-default-file-type-associations-restore.html. If you are using XP, go to http://www.dougknox.com/xp/file_assoc.htm.
If this does not work and it started recently, try a system restore to a restore point BEFORE the problem started. If you use Windows 7, see:http://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, see:http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, see:http://www.bleepingcomputer.com/tutorials/tutorial56.html. If the first attempt fails, try an earlier point or two because the problem may have started before you noticed.
I hope this helps.
Good luck!
-
Successfully connected to SOPCAST, but Windows Media Player 11 cannot read the media.
I've successfully connected to SOPCAST, but Windows Media Player11 cannot read the media. I am running XP Professional, Internet Explorer8. Are there settings I need to change to enable P2P?
Hello
Try the tool Microsoft Fix It to the article below and check out them.
Solve the problems of Windows Media Player video and other media or library
http://support.Microsoft.com/mats/windows_media_player_diagnostic/ -
Original title: I'm having a problem trying to connect to a Windows XP SP2 to a wireless secure with WPA2, had this error "Windows Media could not find a certificate to connect to the network.
Not Applicable
Hi StheveOses,
As Cameron O have rightly said, you must have Service Pack 3 and other important updates installed. If you continue to experience problems with the connection to the wireless network, you will have a quick glance at this article.
How to troubleshoot wireless network connections in Windows XP Service Pack 2
(Works for Windows XP SP3 as well)
I hope this helps.
-
In my office, we have 2 internet connections in the 1 come from media for Cisco router converter and then switch and 1 other comes through router dlink Media Converter and then to the same switch since 1 connection uses the gateway 1 and another 2. In this scenario when the system windows xp or Linux system if uses gateway 1 net will properly and in a way even when windows xp system attempts to use gateway net 2 will come not wat is not here in this scenario pls help me...
original title: network problemHi Manas,
Since you are still facing problems, you can ask your question in the Forums TechNet's Windows XP for assistance.
-
Windows Media Player says does not connect to the internet.
I keep trying to get the media guide and open my information center for my songs and Media Player says that its work offline. I went and checked to make sure that work offline mode has not been verified and is not, and I even checked and unchecked it.
Hi tinytim32927,
1. what version of Windows Media Player?
2. don't you make changes before the show?Try these steps and check the result.
a. start Internet Explorer.
b. click on the Tools menu and then click Internet Options.
c. click on the Connections tab.
d. under numbering and VPN settings, click the broadband connection, click settings and then click on automatically detect settings.
e. click OK.
f. check if the problem persists.See programs Internet in Windows XP can not connect to Internet
Visit our Microsoft answers feedback Forum and let us know what you think.
-
My computer recognizes my 4g Zune mp3 as being connected but the Zune software or the Windows media Player syncs with him.
Hello Closryder,
Thank you for your message. Sync your Zune with Media Player is not supported. To the troubleshooting steps for your Zune to sync with the Zune software, click on the link below.Please let us know if it did or did not help to solve your problem.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
Media Player cannot connect to the server - Original COOD2EE7 error code
Tried media player - tools - options-network. Cannot configure the Protocol / the proxy settings. Streaming proxy settings area is empty.
Hello Adelek,
Thank you for posting. It seems that you may have a firewall problem. I that you would suggest to check your firewall settings to see if it's to allow access of media player. I've also included some basic information about this error.
Please let me know if this helps you.
You got the C00D1198 error message when you use Windows Media Player. The following information can help you resolve the problem.
Unable to connect to the server
Windows Media Player cannot connect to the server that hosts the content you want to listen to. You may encounter this error message for the following reasons:
The name of the server that hosts the content is not valid. If you typed an address Uniform Resource Locator (URL) in the open URL dialog box, verify that the file name is spelled correctly and that the path to the file is correct, and then try again. If you clicked a link on a Web page, the link isn't valid.
The server is not available (for example, the server is busy or not online). Try again later.
For Windows Media Player proxy server settings are not configured correctly. Verify that your proxy server settings are correct.
To check your proxy server settings
Click the arrow below the now playing tab, and then click More Options.
Click the network tab.
Check your settings in the Streaming proxy settings area.
Note
If you don't know what your proxy server settings should be, on the network tab, select a Protocol, click on configure, then select Autodetect proxy settings or use the the proxy settings of the browser (available for HTTP protocol only).
Zack
Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Where can I find Epson scan v3.2.4
I had to do a clean install and I lost my Scan.app of Epson. Epson no longer stand 10.8 OS so that they are without help. I'm trying to find download Epson Scan 3.2.4. Thank you
-
Okay, so Ive had my Compaq Presario A916NR scince, 2007, however, recently, optical drive always leaves errors output (so I can't use any cd/dvd or anything) and my hard drive crashed and broke, I managed to get my important files and photos off, how
-
Hi Support Team, 1) Since I installed El Capitan I can't 'wipe free space' on my MacIntosh HD by 'Utility Disc': 'Erase' it is blocked. 2) How do I unlock (enable) the function "Clear space" in "disk utility"? Jona li
-
I have a laptop G72 and it will start, but Windows 7 does not start. On using diagnostic tools in the start menu, my hard drive and my departure fail their tests, with both giving me this error code: UCUFWF-56C81D-XD003G-60WF03 No idea what this mean
-
Reinstall Windows XP without removing the entire program
PC was loaned to my daughter, went back and see that many programs are gone, can I reinstall WinXP on remaining programs?