Tecra A4 and the docking station Port Replicator III

Similar Questions

• Computer HP laptop-17-e107nr - docking station/port replicator

  A colleague recently bought a HP laptop, off a QVC shopping channel as a replacement for an older desktop computer.

  She asked for assistance in obtaining its transferred files.  In conversation, she is also looking for something that will allow him to cling easily to its large monitor, mouse, etc. without havin plug them each time.

  The only model number I have at my disposal, right now is 17-e107nr, but I was not able to perform a search that will show me a compatible docking for this model.  She has not yet received the laptop.

  To simplify the transfer does anyone know of a compatible docking for this model or what model HP number this might amount to so I can get better.

  Thank you

  Look under Pavilion 17z-e100 series. It is the designation of the generic template for this material.

  Here is the Service Manual:

  Manual

  This series of model doesn't have a "wink down" port of the docking station, so you'd have to use a plug in the usb 3.0 docking station. Something like this:

  http://www.shopping.hp.com/en_US/home-office/-/products/Accessories/Docking-Stations-and-Stands/H2L61AA;pgid=thRACA_XPwlSRpXnZodi0rKM0000TqBuKBDk;sid=q_Otu3_FkZGquyyeNUP5O6bKLH_nek9ql2dA6j4uLH_nevFE3yILRDGL? HP-USB-3.0-3005pr-Port-Replicator

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• External keyboard works only after the restart with Port Replicator III Plus

  The problem is that when I start the laptop, the external PS/2 keyboard does not work. When I reboot keyboard this one turns around and then I can use it.

  This problem occurs on a laptop Toshiba Tecra with an Advanced Port Replicator III Plus. I used several keyboards, so this isn't the problem. I changed a value in the bios which is used for devices USB (mouse/keyboard). I disabled the option, because I use a keyboard and a PS/2 mouse, but the problem is not resolved. I hope someone has an answer to this problem.

  Hello

  It will be interesting to know what model Tecra you use. Is it perhaps Tecra A6?

• Portage Z30-A-13W connected to the high speed Port Replicator III - USB problems

  Hi all.

  We recently bought a new Portage Z30-A-13W and Hi-Speed Port Replicator III.
  Setting network and graphics work correctly with port replicator, but the USB ports don't work at all.

  I tried the port replicator USB 2.0 and USB 3.0 and I can't seem to work with a keyboard, mouse, USB key or a mobile phone.

  In the case of mobile phones, it is also no output power of the ports that the mobile does not start to load.

  At any one another experianced this problem and what was the resolution.

  Thank you very much

  Jonathan Davies

  Hello

  As far as I know additional drivers are not really needed to use the USB ports.
  This is why I m wondering why don t USB ports work.

  It might be possible that ports high speed Port Replicator III USB are faulty, but to be honest, I can't imagine that all 6 USB ports may bad work at the same time.

  So maybe it s a software problem.
  First of all, I would recommend the default BIOS and check the USB legacy support for keyboard and mouse could be activated.
  After access to the Device Manager and remove / delete the USB hubs and controllers in the list of devices.

  Keep high speed Port Replicator III connected to the computer and restart the device.
  Usually, the system should recognize automatically deleted USB ports and must update the drivers of USB ports.

  I hope that the USB ports don't work after this short workaround solution.
  Keep your fingers crossed.

• What docking station / Port Replicator is compatible for the Satellite P70-A-104

  Hello

  does anyone know what model port replicator (name of Toshiba for docking station?) adapts to Toshiba P-70-A-104?

  Your
  Stephan.

  Hello

  As far as I know that this Satellite has port replicator, so you can use an external device, such as Toshiba Dynadock (universal docking station).
  More info about Dynadock you can find on the pages of Toshiba. As a small preview check please
  http://www.Toshiba.EU/accessories/laptops/docking/universal-docking/pa5082e-1PRP/
  http://www.Toshiba.EU/accessories/laptops/docking/universal-docking/pa3927e-1PRP/

  If you have any other questions you are welcome.

• Dell U2414Hb with Microsoft surface book and the docking station works do not reliably

  I recently bought two monitors Dell U2414H to work with my book surface and surface dock. The monitors to work reliably for a while (sometimes up to 3 or 4 hours) then suddenly one or two will be turned off and the display will switch to the surface for a second book or two and then return to the monitors. Sometimes, the system can go through a unstable stage of switching between monitors and books surface exposure 30 times or more within a period of 5 minutes.

  I have been searching for a solution and found the following page on the Microsoft website that indicates there is a known issue.

  Link to the Page of MS

  I tried searching the dell website, but can't find anything on this problem.

  I'm trying to find out

  1. If it is something Dell know and respect that I live the known problem.

  2. is it likely to be a solution in a reasonable time

  3 should I return the monitors and buy something different.

  Any suggestion would be appreciated

  Simon

  Problem =
  * When the Surface book is anchored and double are connected using DisplayPort multistreaming (daisy chain), one or two screens will not be recognized after restart or power cycling the book surface. In both cases, the resulting no video appearing on external displays.
  * Some displays will expose rip video on the secondary display, what installation using DisplayPort multistreaming (daisy chain).
  * A view not to return to video mode displayed after recovering from power save mode.

  Workaround short term =
  Surface CDM Dock on--> Dell mDP to DP cable--> #1 off DP (DP 1.2) monitor
  Surface book CDM on--> Dell mDP to DP cable--> #2 off DP (DP 1.2) monitor

  Long term = solution
  We still see a lot of questions with our instructors and Surface products. Microsoft is supposed to work on a special connector dongle that enhances the process of link training to increase the power of the signal has negotiated with external monitors. As to when this will be available, which is unknown by Dell.

• Tecra A8 and Adv Port Replicator III - no audio output from the port replicator

  I have a Tecra A8 anchored on an Advanced Port Replicator III. All ports (network, USB, video) with the exception of the AUDIO ports seem to work well. I can get sound from the headphone jack on the front of the A8, but nothing since the station docking ports. Is there a docking station driver or something I need to install to get the sound from the docking station not the laptop?

  Hello

  The Advanced Port Replicator III supports the line and line port left.
  As already suggested by user above; Check if you are using the command-line output port!

  Welcome them

• Tecra S3 Advanced Port Replicator III more: video output, analog & digital

  I have a Tecra S3 in association with Advanced Port Replicator III.
  I can't get the two graphics cards to work together.

  The analog and digital video output should work together.

  It works on a Tecra S2, but not on the S3?
  Does anyone have an answer?

  Hello

  You want to use both outputs DVI and VGA on Advanced Port Replicator III graphics more simultaneously?

  Advanced Port Replicator III more supports the use only if the computer system unit laptop itself also supports the simultaneous use of RGB & DVI.

  So that would mean that the backs of Tecra S3 not supported this feature

• W530 and Mini Docking Station - monitor not displaying at boot time

  I have a W530 (2441A 53) and I just the mini docking station for it (433835U). We are using PGP Desktop, then when I start my laptop, it prompts me for a PGP password. The monitor does not display it for me at all. I have to go to the laptop, open it and enter the password (well, actually, I think I can probably get on the keyboard that I use with the monitor, but I don't see what is happening, and the docking station is in an uncomfortable situation). Once I get the password, and the machine gets more in the boot process, and then the screen finally shows what happens, and it's very well after this point (well, not exactly - it is not about taking advantage of the resolution of my screen - but I am not concerned about it right now).

  Is there a setting I should do in the BIOS, Control Panel, etc., so that the monitor can function during startup?

  In the BIOS, set the graphic display to the detection of Optimus discreet and set to 'disabled '.

• Toshiba high speed Port Replicator III - use of 2 x 4 k monitors on 60 Hz

  Dear Toshiba support.

  Is it possible to run 2 x 4 monitors k on 60 Hz on the Port Replicator Port Hi-speed Toshiba III (dockingsation)?
  He says he has Display port 1.3 (supports 4 k monitor the 60 Hz.) and a 2.0 HDMI (which also supports monitor k 4 on 60 Hz.).

  With sincere friendships.
  Augurkie

  PauPau wrote in this thread on the high speed Port Replicator III
  https://Forum.Toshiba.EU/showthread.php?83052

  DisplayPort supports the following resolutions:

  Resolution - Refresh Rate (HZ)
  640 x 480 - 60,72,75,85
  720 x 480-85
  800 x 600 - 56,60,72,75,85
  848 x 480-60
  1024 x 768 - 60,70,75,85
  1152 x 864-75
  1280 x 720 - 50,60
  1280 x 768 - 60,75,85
  1280 x 800-60
  1280 x 960 - 60,85
  1280 x 1024 - 60,75,85
  1360 x 768-60
  1366 x 768-60
  1400 x 1050 - 60,75
  1440 x 900 - 60,75,85
  1600 x 1200-60
  1680 x 1050-60
  1920 x 1080 - 24,25,30,50,60
  1920 x 1200-60
  2560 x 1600-60
  3200 x 2000-60

  But it seems the resolution also depends on the GPU built in the notebook

• Tecra M3 and Advanced Port Replicator III: not recognized as docking station

  Hello!

  Just install my new M3 and Advanced Port Replicator III. Everything works fine, but the Port Replicator is not recognized as a Docking Station (No disconnect in menu button start XP; pressing disconnect button on the Port Replicator itself has no effect either).

  Is TI WHEREAS behavior?
  Thank you in advance.

  Hello

  You reinstall the unit with the recovery CD?
  As far as I know that the TOSHIBA Mobile Extension3 for Windows XP is responsible for the good condition of the market of the docking station.
  Well, I recommend to reinstall this driver and utility.
  Perhaps the installation of the new driver will solve this problem.

  Good bye

• Tecra M11 - 17V - identify the serial port on the docking station

  I have a laptop Toshiba Tecra M11 - 17V, which I often use with the docking station that accompanies it.
  There is a DB9 serial port at the back of the docking station, but I don't know what COM Port.

  I use Windows 7.

  In the device, COM9 Manager - COM22 are identified as Port BT (bluetooth). Com7 - COM8 are RIM Virtual Serial Port v2, COM17 is Prolific USB-to-Serial Comm Port and COM18 is USB-Serial CH340.

  I thought that COM17 or COM18 were the most likely candidates, but have not been able to get to answer using one of them.

  I connect a Psion 5 (Comms app) to him and have developed ports and the Psion 8bits, 19200 baud, no parity, 1 stop bit.

  Hello

  > There is a serial port DB9 on the back of the docking station, but I don't know what COM Port, it is

  I think you have misunderstood something wrong
  COM ports in Device Manager are virtual com ports
  There is no link between a serial port and a virtual com port.

  I have a question: what docking station you have exactly?

  I had an express port replicator and this device required an additional serial port driver installation.

• Tecra M9 longer works with the Advanced Port Replicator III

  Hello

  I have the Advanced Port Replicator III Plus (PA3474E-1PRP), and it works very well with my M5 (M3 and M200). For example I connect my laptop through it to my monitor/mouse/keyboard/external DVD/hard drives, sound, webcam etc...

  Now, I'm to assess what should I buy as my next laptop and the M9 (PTM91E-03000MEN) seems good.

  Question: * the M9 will work with my plu III advanced port replicator? *

  Otherwise, * y at - it another docking station option that will allow me to connect a M5 and an M9 * please? (of course not at the same time).

  If there is no solution that allows a single docking station for the M5 and M9, then I might as well choose a laptop from another supplier... Main reason to stick to Toshiba all these years is the docking station compatibility that I move older models to the newest...

  All thoughts welcome...

  See you soon
  Daniel
  --

  Tecra M9 and Tecra M5 do not have the same docking connector.
  This means Tecra M5 is the APR III +, Tecra M9 has Express Port Replicator.
  You need the correct docker for each system.

  May it is a solution to be able to use the Toshiba Dynadock. It's USB based:
  http://www.dynadock.com

• Tecra S1 stops when you use the Port Replicator III

  Hello

  I ve you have a problem with a Tecra S1 Notebook and Port Replicator III. When I anchor the portable station, it turns off immediately. It doesn´t so serious I m in Windows or not. The same notebook works in a Port Replicator II without any problem. My first thought was, the Replicator III may be damaged, but I tried with an another Tecra S1 and it worked! Can someone help me with this?

  Thx a lot!

  Mathis

  Hello

  AFAIK that should not be any problem as Tecra can be used with the two PRs. The only thing I can recommend is to reinstall the Toshiba Mobile Extensions.

  Good bye

• Tecra Z50-A-12 X is not properly connected to the Port Replicator III

  Hello

  I just bought a TECRA Z50-A-12 X with HI-speed III 120 replicator Port Replicator.

  It works but the computer is not stable and I fear that this will eventually damage the port see me problems when using.

  Indeed, the PC sits well in the Replicator.

  Is there a solution or did not have this app?

  Thank you for your response.

  Nice day

  Hello

  Please don't get me wrong, but you should clarify this with Toshiba directly. Here on this forum, you can hear some useful opinions and comments, but I think you should get info straight from Toshiba directly.

  You can also do is to contact the nearest Toshiba service provider and ask for help. You can visit ASP and demonstrate how it works and I hope that you will get a professional opinion on this problem.

  Long ago I had a Tecra laptop with port replicator, and he was well in place and really does so port replicator he not there no danger of damage to the small port located in the lower corner.