Connection to the local network disabled in Windows 8

Hi team,

I disabled the Local area connection icon in 'control network and Internet\Network connections '. I thought that I can enable it immediately, but now the icon is not available in "network connections".

For this reason, I couldn't create a WiFi hotspot in my laptop. The error message is attached below:

I understand that it is because 'Local Area Connection 14' does not appear in 'my properties to Mobile Broadband' for sharing network.

So, please guide me to activate/create the 'Local Area Connection 14"and help in the creation of WiFi hotspot.

Kind regards

Vasanth G M

Hello Vasanth,

Please keep us updated and my apologies for the late reply.

I suggest you to refer to suggestions provided by AndyWihalim responded on July 13, 2013.

Let us know the result.

Tags: Windows

Similar Questions

  • Why if a system is xp and one system is windows 7 and the two connected to the local network, but file-sharing does not work

    a system is xp, another system is windows 7 basic and both connected to the local network, after you set up shared drive, mowing arrives not

    Hi Abhay,

    I suggest disable you the password protected sharing and check if it helps.

    Networking of computers running different versions of Windows

    Note: Follow the steps in the section "to enable sharing protected by password in Windows 7" and turn off password protected sharing.

  • How can I disconnect from the internet but to maintain my connection to the local network in Windows 7?

    I need to disconnect internet to my PC Windows 7 while maintaining my LAN network. Can anyone help?

    Hello

    If you want to disconnect Internet on the Windows 7 computer, then you can follow the steps mentioned below. These steps would help you to disconnect from the wired connection, while the connection is still active.

    (a) click Start.

    (b) type network and sharing Center in the start search bar and press ENTER.

    (c) in the left pane, click on change adapter settings

    (d) it would be to open a window with the connection to the wired LAN.

    (e) now, right click on the wired LAN connection icon and select Disable. (Provide the password if necessary).

    (f) it would disconnect the computer from Windows 7 to connect to the local network.

  • Connection to the local network not appearing is not in the area of notification on the Windows 7 computer.

    Connection to the local network not appearing is not in the area of notification on the Windows 7 computer.

    Right-click on the taskbar and select Properties, and then click Customize.  Look for the connection and modify to display the icon and notifications.

  • cannot connect to the local network using windows 7

    Recently bought a HP Pavilion laptop (AMD Athlon II P320 Dual - Core) ((G62 - 208CA)). Having a problem connecting to the local network. I have flashing lights on the lan (orange and white) connector.

    Using the ipconfig command, I get an IP address, subnet mask and gateway by default however messages below will appear:

    Tunnel adapter isatap. <578608BD-22EF-4A01-90ED-D709CB81D027>:

    State media: media disconnected

    The connection-specific DNS suffix. :

    Tunnel connection to the Local network adapter * 9:

    State media: media disconnected

    The connection-specific DNS suffix. :

    Tunnel adapter isatap. :

    State media: media disconnected

    The connection-specific DNS suffix. :

    TEREDO TUNNELING Pseudo-Interface tunnel adapter:

    State media: media disconnected

    The connection-specific DNS suffix. :

    Tunnel adapter isatap. our field: *

    State media: media disconnected

    The connection-specific DNS suffix. :

    I tried to turn off the firewall and connect without success

    My network card is a Realtek PCIe FE Family Controller and confirmed that the drivers are up to date

    Any help would be appreciated

    Thank you

    Well Yes! So it was an older version of the bonjour service... thank you Adobe.

    You can find the latest version here:

    http://support.Apple.com/kb/DL999

  • HP OfficeJet Pro 8600: HP OfficeJet Pro 8600, connected to the local network but does not print a printer on the same LAN

    HP OfficeJet Pro 8600, connected to the local network but cannot print printer on the same local network.

    Work tried fixing it but all attempts fail.

    Firewall disabled.

    Printer recognizes the router's LAN.

    Was also pointed out that the port does not communicate, can not remove it; Cannot add another...

    Printer does not print.

    How can I fix?

    Hi @AnnisMonadjem,

    Welcome to the Forums of HP Support!

    I understand that you are unable to print to your printer HP Officejet Pro 8600. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    When you say 'LAN', are you referring to the network or you try to share the printer on the network?

    How is the printer connected? (Ethernet/WiFi)

    If you have noticed that the port is causing problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

    What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

    HP has several Officejet Pro 8600 series.

    What is the name and the product number of your printer? How can I find my model number or product number?

    • Update the firmware of the printer.
    • Don't hide the SSID (network name).
    • What type of encryption are you helping? HP recommends WPA and WPA2.
    • You have a double router broadband? Make sure that the two groups were not the same network name.

    If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

    To assign the static IP address, use the following steps as a guide.

    • Print a Page of Network Configuration menu of the printer front panel. Note the IP printer. IPV4 address
    • Type the IP address in the browser to bring up the SAP.
    • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
    • Select Manual IP.
    • Enter your IP address manual (192.168.0.232)
    • Enter 255.255.255.0 for the subnet mask, except if it is different.
    • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
    • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
    • Click on apply.
    • Restart the router, the printer and the computer.
    • Test printing and scanning.

    If the problem persists, download and run this patch rollup: resolving printing issues in Windows 7 and Windows Server 2008 R2

    • Try printing and scanning.

    In addition, if you are still having problems try the steps in this guide, HP printers - "offline" Status Message printer (Windows 7).

    Continue on, if the problem persists.

    Important!   Delete the temporary files and folders by using the disk cleanup utility

    1. Open the disk cleanup utility:

  • Connected to the local network, but can not use internet

    I recently had problems with access to the internet after reinstalling windows 7. Before the reinstall worked very well.

    I can connect to the local network without problem, and it shows that the internet is connected. Yet I can not access the internet. When I disconnect and reconnect, I get a few seconds of internet work before it stops working.

    When a diagnosis in the network and sharing Center, I get the error "default gateway is not available" and occasionally "the connection between your access point, etc. and internet is broken"

    Other computers and devices using the network are working properly, although there was a 'competitor IP address' error on another pc, which, after a reconnection, solved itself.

    I use an edimax 802.11n wireless card and a D-link router

    I tried several things to make it work again, but without result. Any help would be greatly appreciated

    disable TCP/IPv6 had no effect.

    I think I can have fixed me, I installed the driver microsoft before the reinstall instead of the driver edimax and internet suddenly started working.

    Thanks for the help of yor

  • My connection to the Local network is suddenly missing

    Hello

    Suddenly, I found I can't access my LAN port because I can't found the option to connect to the Local network in network and sharing Center. I also looked in Device Manager, but there is also the LAN card is missing. I don't know why it's happening. The only change I made is configured LAN properties as set as--> advanced--> liaison & duplex speed--> 100 Mbit/s/full duplex. Although I don't know if it has nothing to do with my lack of LAN option, but that's the only change that I made before I see my LAN is missing. then I reinstalled my windows 7 with the hope that it will be recovered, but after the installation of a new windows 7 the problem still persists and also I am very sure that my operating system windows 7 is all ok to install all drivers base because I used the same OS disk for countless times.

    Kindly help me how to solve this problem, because I can't use any Ethernet connection in my computer.
    Thanks in advance...

    The total absence of the adapter is a hardware problem.  Is this a desktop or a laptop? If Office on the motherboard or card adapter?  If it is a laptop or onboard there may be an option to enable / disable in the BIOS which might be worth checking out.

  • (Connection to the local network) is not a valid IP configuration when you try to share internet via ethernet

    I shared my wireless network connection to my laptop with my Tower and I tried to change some things static ip and now my turn gets no internet at all. Here is my ip config for my laptop

    Windows IP configuration
    Name of the host...: Piro-PC
    Primary Dns suffix...:
    Type of node...: peer-to-peer
    Active... IP routing: No.
    Active... proxy WINS: No.
    Wireless network connection Wireless LAN adapter:
    The connection-specific DNS suffix. :
    ... Description: Atheros AR5008X Wireless Network adapt
    Physical address.... : 00-1F-3A-8E-D9-DC
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Address IPv6 local link...: fe80::a11b:747:8de1:c32a % 11 (Preferred)
    IPv4 address: 192.168.1.113 (Preferred)
    ... Subnet mask: 255.255.255.0.
    Lease obtained...: Saturday, November 10, 2012 18:52:10
    End of the lease...: Sunday, November 11, 2012 19:14:35
    ... Default gateway. : 192.168.1.1.
    DHCP server...: 192.168.1.1.
    DHCPv6 IOOKING...: 218111802
    DHCPv6 DUID customer...: 00-01-00-01-13-C9-24-20-00-17-42-BC-C1-D3
    DNS servers...: 75.75.75.75
    75.75.76.76
    NetBIOS over TCP/IP...: enabled
    Ethernet connection to the Local network card:
    The connection-specific DNS suffix. :
    ... Description: Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller
    Physical address.... : 00-17-42-BC-C1-D3
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Address IPv6 local link...: fe80::283a:df5d:cf7a:d0ae % 10 (Preferred)
    Autoconfiguration IPv4 address. . : 169.254.208.174 (Preferred)
    ... Subnet mask: 255.255.0.0.
    ... Default gateway. :
    DHCPv6 IOOKING...: 234886978
    DHCPv6 DUID customer...: 00-01-00-01-13-C9-24-20-00-17-42-BC-C1-D3
    DNS servers: fec0:0:0:ffff:1 1%
    FEC0:0:0:FFFF:2 1%
    FEC0:0:0:FFFF:3 1%
    NetBIOS over TCP/IP...: enabled
    Tunnel adapter isatap. {B2EC9B12-C460-46DE-A9CC-9B8551AF0AF3}:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Microsoft ISATAP adapter
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    Tunnel adapter isatap. {E818BF11-C224-432F-B7C0-3F2949FAADF8}:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Adapter Microsoft ISATAP #3
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    Card tunnel Local Area Connection * 16:
    The connection-specific DNS suffix. :
    Description...
    . : Teredo Tunneling Pseudo-Interface
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    IPv6 address: 2001:0:9d38:953c:1893:f6:e7eb:e988 (Preferred)
    Address IPv6 local link...: fe80::1893:f6:e7eb:e988% 23 (Preferred)
    ... Default gateway. : ::
    NetBIOS over TCP/IP...: disabled

    Ethernet has no default gateway so he does not know where to look for information.  Its IP address indicates he can't get an IP address to the router, or the external DHCP/DNS servers.

    Go to network & share > change adapter settings > Ethernet > properties >... Enter the IP Address of the gateway by default even in wifi.

  • I can connect to the local network, but not to the internet

    Why in an internet connection, I can connect to the Local network, but not to the Internet.
    I have valid IP address and configuration is good.

    I recommend you read some threads here in the forum about similar issues.
    If this problem occurs using the WiFi network, then check if you can use the connection to the local network.
    Using the WiFi network, you must check if the common WLan parameters are favourable;
    Check if the encryption key is right; turn off filtering by mac address, check the TCP/IP protocol settings if it has been set to automatic, disable the firewall settings, rest you WLan router, check if you connected to the right SSID.

    Good bye

  • Connection to the local network not appearing is not in network connections

    A month or so I reinstalled Windows XP SP2 (have since updated to SP3), and ever since then the LAN connection icon does not appear in the network connections window, and even when I plug the ethernet cable it does not automatically turn on the connection to the local network. My wireless connection works perfectly well. I went to the HP website to download all the drivers and also visited if the Device Manager on my computer to make sure that all drivers are in place. Even with all the drivers, it still does not connect to the local network. Help, please!

    Hi rawkous,
     
    Follow the steps listed in this article to resolve the problem:
  • A cable is not plugged into the network adapter 'connection to the Local network.

    Hi, I am using a Dell Inspiron E1505... OS: Vista... 32 bit... IE 9... I still use dial-up "Conexant HDA D110 MDC V.92 Modem" connection connected to the internet without any problem... the problem is when I asked someone to download a program "MS Office Home Student & 2010"(acheté le logiciel àle staples)... the person downloading the program via an Ethernet connection on my laptop... "." I never use the Ethernet connection to connect to the internet... Open to the top of my "Network connections" window and noticed my 'connection to the local network' has a red X and says "network cable unplugged"....." "" Broadcom 440 x 10/100 integrated controller. My toolbar in the bottom right of the screen displays an icon of two monitors with a red x as... I have made several attempts to fix using the "Microsoft fix - it Center... didn't help me..." also "diagnose and repair" on my laptop... no positive results... In the window "Network & sharing" "also shows a red X... Please advise... Best regards, John

    Hello

    Reading between the lines a bit here, it is my understanding...

    1. Never use Ethernet, probably because you don't have broadband for some reason any?
    2. Due to the size of the download, you asked someone else to do it with no broadband?
    3. As a result, which is two screens with a red X icon, but never used to be there?

    This icon with the red X is only informative. If you do not use Ethernet then you won't have connected cable, which means that the information you see on "network cable is unplugged" is correct. If you don't like this icon, you can hide...

    • Right-click on an empty part of the taskbar, and then click Properties
    • Click the Notification area
    • You will see a check box for the network, there uncheck and then click OK to hide the icon
    • Reverse this process, if you want to display the icon

    Or is your problem you can connect is no longer with dial upward? If this is the case...

    • Click Start, type inetcpl.cpl and press enter
    • Click the Connections tab
    • 'Never make a connection' values? If this is the case, always select "default connection" (or "Number using whenever a network connection is not present")
    • Click OK

    Tricky

  • No Internet access, the 'Connect to the Local network' and 'Wireless network connection' are "Local only".

    I'm portable computer maintenance of the customer, a Toshiba Satellite L305-S5885, under Vista Home Premium x 86 SP2, with infections by malicious software and internet connection problems. I have managed to get rid of all of its 251 infections and I am now addressing the connectivity problem. I'm unable to achieve on its ethernet or a wireless connection to Internet. The two network status of connections 'Unidentified network', and also ' access: Local only ' all other machines hooked up to my router via CAT5e and some via 802.11 g/n, have excellent speeds with internet connectivity, so I know that the problem is limited to his machine. I tried the following:

    Deactivation and reactivation of these two connections: FAIL.

    "Diagnose and repair" on the two connections: FAIL.

    Under dynamic I.P. type to static/static to the dynamic: FAIL.

    Uninstalled all network via Device Manager devices, then restart: FAIL.

    Manually uninstalled all the drivers and utility and installed the latest versions: FAIL

    The command ipconfig/all text follows:

    ----------------------------------------------
    Microsoft Windows [Version 6.0.6002]
    Copyright (c) 2006 Microsoft Corporation. All rights reserved.

    C:\Users\Brooklyn's>ipconfig/all

    Windows IP configuration

    Name of the host...: Brooklyns-PC
    Primary Dns suffix...:
    Node... type: broadcast
    Active... IP routing: No.
    Active... proxy WINS: No.

    Wireless network connection Wireless LAN adapter:

    The connection-specific DNS suffix. :
    ... Description: Intel (r) Wireless WiFi Link 4965AGN
    Physical address.... : 00-21-5C-31-87-95
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Autoconfiguration IPv4 address. . : 169.254.174.235 (Preferred)
    ... Subnet mask: 255.255.0.0.
    ... Default gateway. :
    NetBIOS over TCP/IP...: enabled

    Ethernet connection to the Local network card:

    The connection-specific DNS suffix. :
    Description...: Realtek RTL8102E Family PCI - E Fast Ethern
    and NIC (NDIS 6.0)
    Physical address.... : 00-1E-33-4E-2E-F7
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Autoconfiguration IPv4 address. . : 169.254.74.29 (Preferred)
    ... Subnet mask: 255.255.0.0.
    ... Default gateway. :
    NetBIOS over TCP/IP...: enabled

    Card tunnel Local Area Connection * 6:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: isatap. {C41651CC-0B3D-411D-8187-745214 C 69}
    B4B}
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    Card tunnel Local Area Connection * 11:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: isatap. {816357D 3-D 8-494C-AA09-F622AE861 44}
    0FA}
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    Card tunnel Local Area Connection * 14:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Teredo Tunneling Pseudo-Interface
    Physical address.... : 02-00-54-55-4E-01
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    C:\Users\Brooklyn's >
    --------------------------------------------------

    Guys, I'm really hitting my head against the wall on this one, and I would be VERY happy for any help through this. Thank you!

    I thought about it, there was a corrupted installation of Norton 360, the origin of the problem. I've used the Norton removal tool and voila! Internet! Thank you.

  • Network Diagnostics says "connection to the local network 2 has no valid ip address.

    Dear Sir/Madam,

    I use the computer dell laptop windows 7 Home premium 64-bit. Usually, I connect my laptop to the internet through wifi modem. It connects automatically to him and there is no problem. But suddenly, the connection is not showing this wifi but signal showing other signals. I plugged the cable, but not showing also no internet access, then I used the diagnosis then he showed "connection to the local network 2 has no valid ip address" other devices such as my phone, etc. are connect to this wifi normally.
    As there is no internet connection on my laptop, I downloaded "microsoft fix it" and installed in my laptop to another computer but it does not work, he showed me 3 tabs IE to read, etc. to fix it it is opening chrome Web site as there is no internet facility, displays "cannot display page" Web page
    so, please help me with this problem. feel free to ask all the necessary questions.
    Thank you
    Vandenplas, infant.

    Hi Vandenplas,

    Method 1

    Follow the advice given by Meghmala Feb 17,2010 on the thread: http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/local-area-connection-does-not-have-valid-ip/72c61d55-4d20-48bd-80bf-cb25f7b95cb6

    Method 2

    Check the steps on the thread: http://windows.microsoft.com/en-IN/windows/network-connection-problem-help#network-problems=windows-7&v1h=win81tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

    Also check the discussion on the thread:'t-have-a/43ea076e-5210-4194-80d8-cb4681e852a0 http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/issues-found-local-area-connection-doesn

    If nothing helps, you can try to contact your ISP and ask them to reset the settings.

    Hope this solves the problem. If the problem persists, you can write back to us and we will be happy to help you further.

    Thank you!

  • WIN 7 does not have the net driver for Asus A2D WHAT CAN I DO. I HAVE THE CONNECTION TO THE LOCAL NETWORK.

    WIN 7 does not have the net driver for Asus A2D. or I'm unable to find it.
    WHAT I CAN DO. I HAVE THE CONNECTION TO THE LOCAL NETWORK.
    Thanks for any idea, address etc.
    DragMil
    You can wito to * address email is removed from the privacy *.

    Try an older driver installed in compatibility mode

    To run in compatibility mode do the following:

    Click with the right button on the installer > properties > compatibility > choose OS

    http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows?SignedIn=1

Maybe you are looking for

  • HP EliteBook 840 G3: Why BIOS version 01.07 (sp76235) is pulled? (G3 EliteBook 840)

    Anyone know why the BIOS version 01.07 (sp76235) for EliteBook 840 G3 is taken? Link to the BIOS:http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_167436_1 & swEnvOid = 4054 The date is 1 January 3000 so he has obvisoly something wrong and

  • Toshiba TL938 fails to display Greek subtitles, USB movie playback

    Hello The Toshiba media player play well the videos that are in the usb port, but is unable to correctly display theGreek subtitles. Even if they are charged, these characters appear wrong. I tried to convert the srt file to UTF - 8, but it made no d

  • Using the same control appeal return of different tabs

    Hello I am fairly new to this bare with me for a second... I have a situation were I use several tabs with the same exact command buttons in each of them.  Given that the buttons have the same function I want to use the same reminder.  I understand t

  • Driveguard, HP does not work after update to 8.1 win

    Hello I have Pavilion notebook 15-n228us. When I bought it, it came with Windows 8 and the HP driveguard logo was on the taskbar. Now that I put to update Notepad Windows 8.1 logo is never there and Driveguard Control Panel is gone. I have no errors

  • camera assistant software

    My Gateway Laptop crashed. The fixers of the machine made a "restart/reload," that wiped out all data on the hard drive, including the camera Assistant toolbar. Download Camera Assistant Software for Gateway laptop and place in the OFFICE. How do you