Connectivity with B210A wireless problem

Similar Questions

• When I try to connect with my wireless laptop will connect only to Local access. If I connect the laptop to the router with the ethernet cable, it works very well.

  VIsta - Local access only

  HI -.
  I recently moved.   I use the same router from my old apartment and I had no problem connection in the past.   Since I moved I have a new Time Warner modem (Cisco) and the modem works fine.

  The router also works very well I'm able to connect with my iPhone and IPad without any problem.

  But when I try to connect with my wireless laptop, it will only connect to Local access.    If I connect the laptop to the router with the ethernet cable, it works very well.

  It's a Dell Studio 15 with Vista.

  The computer is able to connect to wifi to other places without any problem, but for some reason that I can't connect home.   I tried to reset the modem and the router several times, but that did not help.   I tried the option repair & diagnose several times but it doesn't work.

  I tried to look for other solutions online and tried to disable IPv6, and while it helped some and I was able to connect wireless, the computer ran so slowly that it didn't seem like a good solution.

  This has been very frustrating.   Thanks in advance for any help or suggestion.
  Staci

  Hello Staciusa,

  Have you tried to change the wireless channel that your router is running at? There may be interference that could prevent the internet connection:

  Take a look at step 6 in this article that give more details about it:

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx

  If you need assistance to change the settings of the specific router, you will need to contact your router manufacturer or your internet service provider.

• is "is there a connection with the server problem", in El Capitan

  Hi guys,.

  I've tried to sort myself but up to now no joy... :-(

  I'm under El Capitan on a MacBook and for weeks I need to install a specific program through CDROM connected with my old Mac Mini (Tiger) via my WiFi use it as a hard drive external.

  Everything worked fine, but then I get this annoying message "there was a problem connecting to the server...". »

  So far on:

  1. the service of Mac Mini is not listed in the connection points

  2. the Mac mini is no longer connected to my network

  It seems that this message has something to do with my iCloud service, I tried to unplug and deletion and fixed but as soon as I have reactivated iCloud began to burst once again.

  Any suggestion?

  Thank you

  Sebastiano

  Have you tried to remove the software that you have installed as instructed by the developer?

• connection with the printer problem

  Since the evolution of the router, I can not connect with my Epson printer

  Hello

  1 Windows operating system is installed on your computer?

  2. What is the full and exact error message?

  3. what happens when you try to connect to the printer?

  4. What is the brand and model of the printer?

  Method 1:

  I suggest you mention the link and check if it helps.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/en-us

  Also check out the link for the drivers and support of Epson:

  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp

• Windows 7 on ASUS PC - connectivity with router wireless

  A few days ago my computer just stopped automatically connected when I connect to the wireless network.

  The troubleshooter it fixes every time, but if I do not use the internet, it stops again and I have to run again and again and again... Well, you get the picture.

  Can someone help me? I would really appreciate it.

  Bill

  Thank you land... it worked but I had to go into properties, go to the power management tab and remove the check in the box next to "allow this computer to turn off this device to save power".

• Photosmart more B209a_m: Virgin Super Hub does not connect with the wireless printer

  We recently upgraged to a new blank media 3 hub, the printer is connected to a Hp Windows Vista desktop via USB, other devices (laptops and tablets) could access the wireless printer when the computer is turned on.

  I also created the same printer to be used wireless by the other devices without the Office of marketing, it was a pain having to keep it logging on when he fell asleep. The printer had a different name if you are using one.

  After that the hub of the Virgin was installed I can is no longer using the printer without the Office being wireless, the new Center can not find the printer connects as is done before that other laptops, I had no problem with my old hub and a separate router.

  I've tried everything as suggested by Virgin (not much there) and reinstalled my drivers for the printer. Any suggestions what I can do?

  Hi @Confused_Nanna,

  Welcome to the HP Forums!

  I read your post about how you cannot connect your HP Photosmart b209 printer to your wireless network. I'm happy to discuss this issue for you!

  Please, try the steps in this guide, printer is offline (Windows) as well as this guide, the printer is not maintaining the wireless connection.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope that this post helps!

• EA3500 connection with netflix/google problem

  Hello, I have a weird problem with my router. I can't connect to / have extremely slow access to netflix and Google (all sites of Google, Gmail, YouTube, etc.) using my android phone/Tablet and win 10 desktop. Netflix and Google works great wirelessly with my ps4. On my Xbox which is wired netflix works but YouTube app is very slow. I thought it was my ISP but they ran the diags and advised the service was very good and it could be my router. I reset my router and reinstalled the latest firmware and only these devices mentioned above still can connect to these specific sites. Linksys troubleshooting-made it so without solution. I have had this router for about 3 months without these problems. Help please. Any advice will be appreciated.

  Thank you very much! It worked! Never that. Out of curiosity why seen active IPv6 prevents my devices to connect to these sites? I need it enabled again in the future. Thanks again!

• Data connection with Vibe P1 problem

  My phone is having problem of cellular connection data connection.
  But it was working fine before the last update.
  I don't know if it's a problem of software update.
  I tried many things, I talked with my service provider (BSNL) for hours and tried everything what they suggest, all to nothing does not.
  I even used another SIM (Vodafone) to check if it was the problem of service providers, but no, the phone does not connect even in this case.
  Tried to change the APN, the network settings and so on.
  Kindly guide me and help me solve this problem.
  Thank you very much.

  Have you tried a factory reset? You have mobile data enabled in the settings?

• Connection with the WRT610n problems

  I can't get a wireless connection at all with my new router-WRT610 and my wired connection keeps Goin ' in and out... Any suggestions?

  I called and they understood. Comcast don't suport dual band wireless and so he got all blocked up. I have

• C7180 HP printer goes offline when it is connected with the wireless network

  Hello

  I have a problem which seems to be common, but I can't find a solution simple 'step by step'.  So my apologies in advance for you who are technically much more advanced that I am and know that this has already been answered.

  I have a sony vaio laptop running Windows 7.  At home, I have a printer all-in-one HP C7180 I connected wireless on my home network.  FYI, I have a netgear wireless router.

  Once I have installed the printer on the network, everything works fine until I closed my computer.  On restarting, the printer is detected as offline by my laptop.  Now, my solution is to uninstall the printer and reinstall it.

  If someone would be kind enough to give a detailed set of step by step instructions on how to solve this problem, it would be much appreciated.  I read on the definition of a static IP address rather than dynamic, but I would need one together instructions if this is indeed the way to go.

  Thank you.

  Rich - desperate to finally solve this nuisance.

  Hi rich,

  As you mentioned that the printer goes offline after a reboot, please refer to:

  "Printer is off-line" Message appears on the computer and the HP printer does not print

• WndOws 7 internet connection with multiple users problem

  I just got a new PC running Windows 7.  I have set up the accounts of four members of my family. When you configure access intenet (Verizon DSL) I got a window saying I could not share a connection high speed and had to set up a for each user.  So I set up a connection high speed for each user with the same login information.  The problem is that the first time that a user logs on, it works fine, but as soon as I switch users, the Internet connection is very slow or not there--Explorer said for the page to load, but it is very slow and always interrupted by and windows error message.  the broadband to disconnect and reconnect do nothing to solve the problem.  The only thing that fixes it is to restart the computer.

  Hi HWEng,
   
  This error message do you receive when you try to use internet explore in another account? Also post the exact error message so that we can help you better.
   
  You can run the troubleshooter and check if that helps.
   
  1. click on the Start button and then click Control Panel.
  2. in the search box, type troubleshooting, and then click Troubleshooting. Click View all, and then click Internet connections.
  3. follow the directions in the wizard.
   
  For more information http://windows.microsoft.com/en-us/windows7/products/features/windows-troubleshooting
   
  If you are still having the same problem then, I suggest you to remove the connection parameters to broadband and then turn off UAC (user account control). Now set up a connection broadband for all user accounts and check if it works.
  http://Windows.Microsoft.com/en-us/Windows7/turn-user-account-control-on-or-off

  Internet Explorer does not start or stops responding
  http://support.Microsoft.com/kb/926449
   
  You can also see error messages in the event viewer. If you find error messages after return the exact error message.
   
  Measures to check the application event log:
   
  1. click on start.
  2. in the search box type eventvwr.msc, and then on enter.
  3. now, click Application in the event viewer (local).
  4. now locate the event log on the right side of the event viewer window.
   
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer 
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
  Hope this information is useful.
   
  Umesh P - Microsoft Support

• Oracle Discoverer 4i (Portal db - oracle 8i) connectivity with database 11g problem

  Hi all

  We have oracle discoverer 4i with Portal db (oracle 8i).

  Connect to external databases by using links in the portal db db and reports will use the link db to retrieve data from views in external databases.

  External databases, we have been connecting is oracle 10g version and now we have improved these databases to version 11g.

  Now I have a created a new database link to this 11g database and I have created a new EUL in the portal to connect to this database 11g.

  But when I try to create a report using the discoverer of this new EUL after login for the discoverer we get an "Unable to connect to the database" error.

  We all have the privilege of necesscary to the user and the new database link works perfectly well. (when we try to query directly using SQL as database portal using this db link the query works perfectly).

  I'm not sure if it is a compatibility issue in accessing an 11g database since oracle disk 4i.

  Can any advise if this is the case and if there is no work around for this?

  Kind regards

  REDA

  You say that you are having problems with a link of database from 8i to 11 g (pl exact position of 4-digit versions)? If so, expect as database of links between these two versions are not supported. Is there a reason you can't pass the portal of databases of at least 10 g 2?

  See MOS Doc 207303.1

  HTH
  Srini

• Interruption of the connection with the WIRELESS network and network LAN adapters

  After a virus attack that I got from a USB key, I lost contact with the WLAN and LAN network cards. Manage to clean your computer of viruses, but cannot access the network LAN and WLAN cards. They do not appear in Device Manager. Tried restoring the system to a point of backup in the time before the event, but it does not help. Tried to download and install the drivers, does not work either. Vista should find the network adapater after reboot normally, but this does not happen.

  * original title - lost contact with the WLAN and LAN network adapters. They does not appear in the device even Manager after restarting Windows Vista. I tried to download the drivers, but it does not either *.

  Hello

  You can use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope that information was useful

• Internet connection with creative cloud problem

  When I try to download a trial of Photoshop Creative cloud I constantly get an error of no Internet connection (this is not the case). Can anyone help

  paulmoynagh,

  Solution #1

  Check the "hosts" adobe entered into file. If you see entries adobe here follow the below mentioned steps.

  1. go to the location of the file "Hosts".

  WIN: C:\Windows\System32\drivers\etc

  MAC: Go to the menu finder on top > go to files > type '/ etc', press return.

  2. move the file hosts on the desktop.

  3. open.

  WIN: Open it with Notepad.

  MAC: double click on it.

  4 remove all entries of adobe, that it does not obstruct your machine to connect to the Adobe's Activation Server.

  5. rear move "/ etc" folder.

  Solution # 2

  1. check if you are using any kind of firewall (network/system) / proxy.

  2. turn off firewall / proxy.

  #3 solution (should work)

  Go to deployment: http://www.adobe.com/devnet/creativesuite/enterprisedeployment.html.

  If nothing works, contact Adobe technical support to the: http://helpx.adobe.com/support.html

  Kind regards

  Atul Saini

• HP dv7-6c27cl with a wireless problem. Missing wireless network controller.

  I reinstall Windows 7 64bits, any other driver works correctly except wireless. Missing wireless controller. I tried all the driver available for download in the section of the driver, nothing has worked. The light is still orange orange. I can't turn on and no option in the bios to turn on too... This is the string in the device for the network controller Manager. can you point me to the correct driver to download? Thank you

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01
  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C
  PCI\VEN_10EC & DEV_8176 & CC_028000
  PCI\VEN_10EC & DEV_8176 & CC_0280

  Try to download the HP Support Assistant and run it. It can detect the drivers you need and install them for you.

  Here is the link: http://goo.gl/YJpGD

  Let me know if it works for you or not.