Context between taskflows not connected event

Similar Questions

• System Event Notification service - cannot connect to a Windows Service. Windows could not connect to the System Event Notification service

  I am unable to connect to my network wireless with my laptop Sony, (Vista home premium). This follows an infection in my desktop PC with a Trojan which did not stop, but slow internet browsing. I reinstalled vista windows on the pc and it works fine now bur my still gives mobile me this message. "Unable to connect to a Windows Service. Windows could not connect to the System Event Notification service. This problem prevents limited users to logon to the system. As an administrator, you can view the system event log to see why the service did not respond. "I am the administrator on my pc and laptop. I tried to change the user nothing helps. I use Vista Home Premium Service Pack 1. Intel Core 2Duo T7250 2 GHz. 2 GB of RAM. 32-bit. Sony Vaio FZ31M. If you can give me instructions on how to remedy the situation, it would be appreciated. Thank you, Tony

  Hi 1234Tony,

  First of all, I suggest you that you also scan your laptop for infection by the virus. Second, reset TCP/IP stack Winsock settings. This could correct mistakes involving internet connectivity as a result of problems of installation of network software, due to a virus, trojan or malware infection or even due to disinfection of spyware security software.

  To repair and put back the Windows Vista

  1. Click the Start button.
  2. Type Cmd in start it the search text box.
  3. Press Ctrl-Shift-Enter keyboard shortcut to run command as administrator prompt. Allow elevation request.
  4. Type netsh winsock reset in the command line shell, and then press the Enter key.
  5. Restart the computer

     If please reply and let us know if your problem is resolved or if you need further assistance

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• Windows 7 not connected the system event notification.

  Hello

  I have Windows 7 operating system on my laptop wireless. (it's 32 bit), lately, when I start the computer, it is very very slow and then I get this message that says: Windows 7 has no connection to the system event notification.

  I did system restore, but it did not work. I ran Fixit program but nothing happened. So what is the cause and how to fix it?

  I read a few solutions on the internet, but when I tried to follow them, I can't find certain things on my computer, that are mentioned in the instructions, so I can not complete the step by step instructions.

  Please respond to your first it will be appreciated.

  Thank you.

  Night1

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  I understand that you get the message 'Windows 7 did not link with the event notification system. Let me ask you a few questions to better understand.

  1. When exactly do you get this error?
  2. This error occurs on a specific user account?
  3. You did a significant hardware or software change before this problem?
  4. What security software do you use?

  This conflict may have been caused by some programs launched during the startup process of Windows 7 with the services.

  I suggest you to try the following suggestions and check.

  Method 1: The value Service of event system Automatic Notification.

  To so proceed as follows:

  one), click Start or press the Windows key + R

  (b) type Services.msc in the search box and press enter.

  (c) right click on System Event Notification Service.

  (d) click on Properties , change the startup type to Automatic.

  If the computer stops during execution of the above steps, you can try to put the computer in clean boot mode and check.

  Method 2: Check safe mode

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  If the computer starts quickly in safe mode, check in a clean boot

  Method 3: Perform the clean boot

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Note: See 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 4: Unexpectedly slow start in Windows 7 or in Windows Server 2008 R2

  http://support.Microsoft.com/kb/977419

  You can also check the suggestions provided by Nithyananda J replied on February 13, 2011

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-could-not-connect-to-the-system-event/ce621cf9-577a-407E-86a1-62bbfc3d5129

  After back if still the problem persists. We will be happy to help you further.

  Thank you

• Windows could not connect to the Service Notification of system events

  Yesterday, everything was normal before turning off my computer. However, I saw a message "that Windows could not connect to the Service Notification of system events" after I turn it on now.

  My operating system is "Win7 Ultimate". What should I do to fix this?

  Hi Aporch,

  You can check if System Event Notification Service is enabled and set to automatic.

  Here's how you do it;

  1. Select start > run > and type services.msc.

  2. scroll down until you find System Event Notification Service and make sure that it is running and set to automatic.

  Also make sure Remote Procedure Call following the same steps above.

  3. restart your computer.

  If this does not help, try this:

  1. click on the Start button.

  2. type Cmd in the search text box.

  3. press on Ctrl-Shift-Enter keyboard shortcut to run command as administrator prompt. Allow elevation request.

  4 type netsh winsock reset at the shell command prompt, and then press the Enter key.

  5 restart the computer

  If please reply and let us know if your problem is resolved or if you need further assistance

  Aziz Nadeem - Microsoft Support

• Said computers that windows could not connect to the system event notification service

  Said computers that windows could not connect to the system event notification service. Does not connect as an administrator.

  I played the system restore. Solved the problem, but why did it happen?

• Some controls in the container not connected automatically

  Does anyone know why teststand is unable to connect automatically some components of a container?

  Take a look at the image as an attachment: in the configuration of the station, some areas, such as ProberPort to connect automatically, but others, like WetTestHardwareDAQID_1, do not connect.  If you look at the settings, you will see that the two containers (container TestStand and the cluster of VI output) are similar.  So, why the? .

  

  S G

  You get the message as a mapping between elements of cluster and the subproperties of the parameter is not found.  To check this, go to the definition of the type of the variable StationConfiguration.  In the type definition, right-click and select properties from the context menu.  Select the Cluster tab by the way.  In the drop-down list box, select the WetTestHardwareDAQID_1 and see what is the value of the control 'Cluster Label element.  If it is empty, then there are no specified mapping.  Do the same for WetTestHardwareDAQID_2.  To add a mapping, simply enter the element of cluster label that you want to map the property.

  A possible reason for the 'Cluster Label élément' control is empty, it is that someone has made a change to type on these subproperties.  Note that the type column has a button to change the type of the subproperties.  If you click on the button and select a new type, the cluster by the way the information is lost.  It's something we know and will be fixed in a future version of TestStand.

• Could not connect to the service user profile Service.

  I have a little disconcerting problem.  Every day or two, I can not connect to Windows correctly.  When I start, select my account (which is also the unique administrator account) and enter my password, it spends an abnormally long time in the 'Starting Windows' screen, then I get the following message pop up in the notification area:

  "Unable to connect to a windows service.
  Windows could not connect to the service user profile Service.
  This problem prevents limited users to logon to the system.
  As an administrator, you can review... »

  Shortly after this message, I get a windows error message saying:

  "Location is not available.
  C:\Windows\system32\config\systemprofile\Desktop is not accessible.
  Access is denied. »

  This seems just a desktop computer black with only the Recycle bin icon on it, and the old Windows Start button in the taskbar.

  While trying to understand what is happening, I looked into the application of 'Problem reports and solution' in the control panel and found that every time this happens, I also have a corresponding event of "Stopped working" "Routing and remote access.

  I then restart using F8 at startup and choose the one that says something to the effect of "using the last good configuration known."

  I'm not sure what that means at all, but I hope that one of you people can help.

  Thank you!

  Hello any Leafs fan,

  Thanks for posting on the Microsoft answers Forum.

  Looks like you're running only because of using a system restore to get back when your system is running. Now, you want to know what caused it.

  Usually, when the above error occurs, it is due to a corrupt user profile.
  The best way to fix this is to remove the user profile.

  • Go to the Start button
  • Right click on computer
  • Go to the properties
  • Go to Advanced System Properties on the left pane
  • Select the Advanced tab
  • Go to the user profile Section and click on the settings button
  • Find the profile for the that you want to remove and click Remove.  (It's the best way to remove the local profile in Windows Vista).
  • Connection again and you will get a new profile.
  • To get your Favorites return, go to the old profile in C:\users and copy the data manually.

  The only way to identify what caused the error with the user profile is to try to reproduce it.

  If you have not installed the update of Windows, then you can go to Windows updates and see what are the updates must be installed and manually download them and install them one at a time. Between the installation of the system, make sure you have a restore point that you can go back to if necessary. Once an update is installed, then close and open a session back (or reboot if required by the software update) and see if you get the error user profile. If the error occurs, then go to Services and see if the user profile service is running and set to automatic.

  If you are not able to do anything when the problem occurs, then try to start in safe mode using the F8 key and see if the problem occurs in safe mode.

  You can also look in the event viewer to see if there is no dealing with event profile user or Windows Update errors.
  To get to the event viewer, you can type in eventvwr.msc in the box start the search. This will bring up the event viewer and you can view the summary logs and see what kind of errors you encounter.

  Please post with your results and if you need further assistance.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Sky wireless broadband does not connect with Vista

  I just changed my BT broadband to Sky.It works fine on my Mac but not connecting with my roommates PC that uses Windows Vista.After calls long with sky they said there is a problem with the DNS. I tried to call Microsoft, but they want to charge me which I am unwilling to do. I can connect to the internet on the pc with the thin Ethernet cable. In the center of network share, I have a cross between the network and the help of Internet Icon.Please as it should be sorted as soon as POSSIBLE and I cannot believe with such a company big as the sky that has thousands of customers, they say that it is a known issue and there is nothing they can do... So basically they say that anyone with Vista cannot use their wireless computers!

  Help, please...

  Hello pookieboy140,

  I suggest that you start with the management of Network Diagnostics on the computer that will help you in error, like why you are not able to connect to the Internet.

  You can refer the link that will give you information about this below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-Windows-Network-Diagnostics-event-logs-to-solve-network-problems

  Since you are not able to connect to the Internet, the best way to solve this problem is to contact your service provider.

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• Peripheral USB does not connect to the guest operating system

  Hello

  I installed VMware Server 2.0 on windows server 2K 3 Enterprise. I also installed a new guest OS win 2 k 3 standard.

  My question: during the attempt of USB connection in the comments, it does not connect. It shows the error like: "an error occurred while trying an operation connecting an USB device between the host and the guest. Please check the Device Manager of Windows for the current state of the USB devices attached to the host. "in the events.

  but the usb device works fine in the host operating system win 2 company 3 k. the log shows that:

  16:23:58.671 Jan 08: vmx | USB: Device connection 0 x 400000409306545

  16:24:43.578 Jan 08: vmx | VMXVmdbLoadUsbDevices: New series of 0 USB devices

  16:25:03.421 Jan 08: vmx | USBG: CONNREQ: corresponding request head after 123675 ms for the name: Toshiba\ DataTraveler\ 2.0 vid:0930 pid:6545 path: 1/4/4 speed: high family: storage

  16:25:03.421 Jan 08: vmx | Msg_Hint: msg.usb.win32.connectionError (sent)

  16:25:03.421 Jan 08: vmx | An error occurred while trying an operation connecting an USB device between the host and the guest. Please check the Device Manager of Windows for the current state of the USB devices attached to the host.--

  ---

  explored in the vmware communities but in vain.

  Roline

  See the entries related to USB in my computer FAQ - link is in my signature

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• This cable or accessory is not certified popup while not connected iOS 9.3.4

  I've updated to 9.3.4 iOS on my iPhone 6 more this morning. Now, this afternoon, I get a popup every few minutes saying "this cable or accessory is not certified and may not work reliably with this iPhone." I'm not connected to a cable or accessory. Support Apple advises to do a hard reset, which I did. After a few minutes I received once again the context menu. Not plugged into anything.

  Never received that message before today. The only thing I know that has changed is the software update 9.3.4 (G 13, 35).

  Similar experiences please mark as I have this issue too. I saw another post here, a user with an iPhone 5 with this exactly the same problem.

  Kind regards

  Charles Cavanaugh

  Hi ccphd,

  I understand that you get an error that the accessory is not certified, despite not having anything that is connected to your iPhone. I know it's important to have your device works reliably, so I am pleased to provide you with tips to help with this.

  Learn the steps of troubleshooting we have for this message here:

  If your iPhone, iPad or iPod touch won't charge - Apple Support

  If an alert says that your accessory is not taken care of or certified

  These alerts can appear for several reasons: your iOS device could have a port of loading dirty or damaged, your loading accessory is defective, damaged or not certified by Apple or your USB charger is not designed to load devices.

  1. Remove all debris from the charge on the bottom of your appliance socket.
  2. Restart your iOS device.
  3. Try another USB cable or charger.
  4. Make sure you have the latest version of iOS.
  5. Contact Apple to set up the servicesupport.

  Thank you for using communities of Apple Support, cheers!

• I do not use sync and am not connected? Why my favorites are synchronization?

  My desktop computer has a series of bookmarks that I use at work. My home PC has another, different set of bookmarks that I use at home. I do not use sync and am not connected to sync on each PC. Why my favorites are the synchronization between two PCs? For example, I noticed several bookmarks near the top of my bookmark menu over a line of separation that I do not have to work. I deleted them. I come home and find those missing same bookmarks from my PC at home. I do not want to synchronize anything between the two computers, why what is happening?

  Maybe an add-on is the sync these for you.

  Refresh (called "Reset" in older versions of Firefox) can solve a lot of problems in restaurant Firefox as his default factory while saving your bookmarks, history, passwords, cookies, and other essential information.

  Note: When you use this feature, you will lose all the extensions, toolbar customizations, and certain preferences. See article Firefox Refresh - reset modules and parameters for more information.

  Refresh for Firefox:

  1. Open the troubleshooting information page using one of the following methods:
     • Click the menu button

       

       click Help

       

       and select troubleshooting information. Should open a new tab containing your troubleshooting information.

     • If you are unable to access the Help menu, type Subject: support in your address bar to bring up the troubleshooting information page.
  2. At the top right of the page, you should see a button that says 'Refresh Firefox' ('reset Firefox' in older versions of Firefox). Click on it.
  3. Firefox closes. Once the update process is complete, Firefox will display a window with the imported information.
  4. Click Finish and reopen Firefox.

  This corrects the problem? Please report to us!

  Thank you.

• El Capitan screen sharing does not connect to less than the firewall disabled

  I reinstalled my Mini to El Capitan server and I can not connect via screen sharing. Screen sharing is enabled and the application firewall indicates incoming connections to it are allowed. But the customer never connect unless I turn off the firewall. Sniffing the network says that port 5900 is the problem, but I see no way to specify ports in the application firewall. I do not use the Adaptive firewall, and I don't see anything in the config of pf which would block 5900. This machine is on the public network, I can't throw without a firewall, but I can not understand how to sort goes with her.

  Firewall of Apple's specific app, not specific port

  using a network utility or the wall of the fire out of 3rd?

  If so, uninstall them to test.

  If this isn't something else between your mac and their computer may contribute to cause as the public network itself.

• Ink advantage 2545: changed the name of the wireless router and now ink advantage 2545 does not connect and I'm out of ideas

  I have a Toshiba laptop 64 bit running Windows 10 Home, 8 GB, 1 t hard drive.

  Router is a Samsung phone using Android because it was the only router that I could find which would take the wireless signal.

  I live very pastoral, no neighbours for miles, so I never saw the need for a password on my router.

  Now, some people are installs in less than 400 feet from me, and I think they're piggybacking on my Wifi because my access speed has slowed considerably since they moved in.

  So I decided to change the password of the router, unfortunately, I can not put in any password I want.  It gives me the opportunity to have a predefined password.  So I changed the name of the router I could do without problem.

  My computer very quickly without any problem, however, my printer which worked great for a year with the old router name does not connect on the new name of the router.

  Here is what I tried:

  I had hoped he would ask me for a new name / password, but it did not.

  Then I plugged a cable between the printer and the laptop in the hopes that it would produce a different kind of results.  It has not changed anything.  There is no screen menu on what that be like this on the printer.

  I pressed the wireless button that has the flashing blue light and nothing happened.

  I pressed the button, don't know what it is, but it has a white light, and nothing happened.

  I went on the HP site and followed the instructions but he just said do not connect the cable until told to do so.  So I disconnected everything, lights out and turned back on and still no connection and no invite to plug whatever it is.

  Y at - it everywhere where I have being a novice could get instructions on how to get this working?

  I appreciate any help you can give me.  Thank you.

  Hello

  I think you are talking about SSID. Please, think of it as a new router and use the following ways to correct:

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html
  
  Kind regards.

• 6 s iPhone Bluetooth will pair with El Capitan Mac but does not connect

  My employers very kindly gave me a brand new MacBook Pro running the most recent version (10.11.4) of Mac OS X.  What finish set up I need to pair my iPhone staff 6 (running iOS 9.3.1) to the computer I want to use MacID to secure my computer when I'm away from him.  While the phone would pair (pairing being initiated by the Mac) it would be briefly apply status 'connected' before going to "not connected".  When I then tried to establish a connection, I received the following message on the iPhone:

  Connection failure

  'MacBook Pro' is not supported

  and the only option to close this dialog box click the device forget .

  I therefore looked on my personal Mac which had previously been paired with the phone to find that he was is no longer listed in the devices Bluetooth, but when I looked in the settings for MacID running on my Mac it says "Looking for iPhone 6 s.  I tried to re-pair 6s iPhone to my personal machine and had the same results.  When I called in my TI guru we tried with his iPhone 6 (also installed 9.3.1) and had the same results.  As it's been a few months since I used MacID on my computer that I don't know when the link has been broken - after an update iOS or OS X update.  Bluetooth linking to my Apple Watch still works perfectly.  I was unable to try this out with any other Mac, I was looking for one with an older version of Mac OS X.

  Everyone is aware of this problem or have an idea for a fix?

  TIA

  An iPhone will not pair Bluetooth with a computer (Mac or Windows) for one use other than personal hotspot and it will only do that if the carrier is supported. However, there are a number of things will be using Bluetooth between the computer and the iPhone where the devices are NOT matched. More information in Bluetooth: why can not connect my iPhone or iPad with another iOS device or my computer?

  The following link for MacID support site has instructions on how to do the installation. It requires Bluetooth to be turned on in the computer and the iPhone, but the rest of the configuration/connection is done inside the MacID app on each device, not normal Bluetooth pairing as follows: http://macid.co/help/?c=Setup & sc = Pairing % 20A % 20device

• Satellite Pro c660 does not connect to another wireless after format

  Hey all,.

  I have a Satellite Pro c660 and bought a copy of windows 64 bit with him - the laptop come with many software from toshiba on what I wanted really, I therefore installed windows 64 bit (fitness in the process).

  After the Installation I had some problems connecting to my wireless home (he was missing drivers, but have now install) but finally got it works.

  After having taken it round my friends last night, I could not connect to its wireless - the password has been good and I could see the network, but he just kept constantly defect - its network was on it, because his cell phone he was performing. -The only difference between its network and the spirit (that I can see), it's that she was using the TKIP encryption to connect, while I was using AES (my network card is Atheros). -Even when I tried to configure a network profile and have it automatically connect (using the same information she used, including the TKIP encryption) - it was always not.

  The ideas people? More missing drivers?

  PS - I really don't want all that toshiba nanny software on the laptop.

  Thanks in advance!

  > Any ideas people? More missing drivers?

  If you can see the Wlan network then it means that the WiFi adapter driver is correctly installed and the problem is between the router configuration problems WiFi and wireless network card.

  Are you abele to connect to other networks wireless at home?

  Please disable encryption settings in the Wlan router and try to connect to the Wlan that is unprotected.
  But note; This must be done only for testing purposes!

  You should also check if the MAC address filtering is disabled in the settings of the router.