Continuous operation and tracing

Similar Questions

• JavaScript does not in FF, but works fine in IE, Chrome, Opera, and Mobile devices

  On this page, the menus javascript (two of them) often do not load. If I click on Ctrl + F5, they can load on the 2nd attempt. This Page works fine in IE, Chrome, Opera and mobile browsers, but not in FF. I cleared FF cache by going to options and have also worked with modules and plug-ins to 'ask to activate '. This problem persists...

  Javascript menu bars sometimes don't show at all, or sometimes will appear, but have empty menu items (menu options do not show).

  http://www.consultapedia.com/international/international_marketing/intl_mrktg_skill101.htm

  I've included a screenshot of how they (don't) appear in FF. Also another screenshot of how they appear in other browsers, or when I click Ctrl + F5 in FF.

  Hmm, there is a lot of content added by scripts on this page after a delay.

  Firefox has several optimizations to speed up the display of pages in the cache which may malfunction under certain circumstances. For example, display a page using the Back button will not necessarily trigger an "onload" event in the page. This article describes how to work around this problem for web developers: https://developer.mozilla.org/Firefox/Releases/1.5/Using_Firefox_1.5_caching

  For end users, it is a difficult problem to solve. A partial solution might be the following:

  (1) in a new tab, type or paste Subject: config in the address bar and press return / enter. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste sess and make a pause so that the list is filtered

  (3) double-click the preference browser.sessionhistory.max_total_viewers and change the value from-1 to 0 (that's a zero).

  (Please change not all other parameters similar to 0-sounding or you can disable the ability of Firefox to save/restore your tabs and windows open).

  Then reload the page problem and trying sail away and back to see if the inserted content is preserved.

  There may be a performance penalty slight for this change, but you probably won't notice it. Firefox will be used in the file cache, it will just go up the page in a slightly different way that often works around this issue.

  Does make a difference to you on this site?

• Satellite M70: Bluetooth toggles continually on and outside

  Satellite M70 - Bluetooth enabled a few weeks ago and Logitech Bluetooth laptop mouse worked perfectly so far.

  Now BT toggles continually on and off - in Device Manager I get 5 items of BT - RFBNEP, RFHID, RFBUS and RFCOMM 5-controller USB from TOSHIBA - then it reverses to 2 points-RFCOMM and USB controller for TOSHIBA 5 - then put it back to the 5 elements and so forth, with Windows 'inserted device' survey and "deleted device" sounds.
  Windows (XP) sometimes displays a message - "USB device not recognized".

  Updated to the latest drivers and it still does the same thing.

  How can I fix it?

  Did you try a complete uninstall and reinstall your bluetooth driver? In addition, it seems to me as if there is a problem with your logitech mouse.
  You can check the mouse on another laptop / computer?

  Because, if this serious fault of the bluetooth continues on other PCs as well, so your mouse is the problem.
  Try it, perhaps this may clear some things.

• continuous measurement and logging, LV2014

  In LabView 2012, I examined how project templates QueuedMessageHandler and the measure continuously and logging (CML). In addition, there are all of a lengthy and detailed documentation for the QMS. There is a much shorter documentation for CML, but readers of mention the QMS, given CML is based on this project template of course.

  I just got LV2014, and I began to consider the continuous measurement and model of forestry (DAQmx) inside LabView 2014 project. There is here a change which is not documented: a state machine additional typedef enum in the loop of paremeter. But there is no change in the QMS 2014 version, while this change is not explained in detail.

  You can direct me to some docs or podcasts more explaining the feature of the new version of CML?

  Also, when I try to run the continuous measurement and model of forestry project (DAQmx), just to see how it works, I see strange behavior: even though I always select "connect" in the trigger section, force the trigger button starts to blink, and two messages begin to iterate through the channel indicator : logging and waiting for release. But I always chose "log" is this a bug?

  I was reading an "interesting debate" since the year last too:

  http://forums.NI.com/T5/LabVIEW/buggy-LabVIEW-templates-amp-courses/TD-p/2298766/highlight/true/page...

  I understand that these models are only starting points, but I'd be very happy for some documentation to understand how to properly use these models (I was quite OK with the original models, but the new ones obtained more complex due to the state machine).

  Thanks for the tips!

  Hello

  The additional Typedef is necessary to ensure that only data acquisition-task is started.
  This is because the mechanical action is defined as "lock when released. For example, when you press on the
  Start button, then release, the changes of signal from false to true, and then it goes from true to false.
  It would be two events. During the first event, a new Message is created. Now, when you take a look at the "Message loop will vary."
  you will also see an additional type of def. In this VI data acquisition task is created and started. The problem now is the second event.
  Now another Message is created to start an acquisition process. And if another task-acquisition of data is started, you would get a problem with LabVIEW and DAQ hardware.
  But due to the fact that in the loop of the Acquisition, the State has the value of Acquisition with the first Message, the second Message does not start another DAQ-task.

  In the QMH there no need of this, because you don't start a data acquisition task.

  Two indicators during indexing, strength of trigger is set to false. If the program connects
  and force trigger is disabled. After the registration process, the flag is bit set to Wait on trigger
  because, as already stated, it is disabled. Now Force trigger is true once again, and it connects again. This process
  is repeated and the indicator is switching between these two States.
  When you open the VI "Loop of Message Logging", you will see that the trigger for the Force is set to false.

  Kind regards

  Whirlpool

• Synchronize the analog continuous entry and continuous analog output using the unique PCI6024E data acquisition card

  Hello

  I want to generate the continuous signal and at the same time I want to read that signal that I generate using a single card DAQ. I want to generate signal and the received signal is synchronized and in phase.

  I looked at several samples on the sync, but it quiet confusing. One using the same clock of entry while the other use a trigger to start. I use the PCI-6024E DAQ card.

  Can someone help me in this regard?

  In two of these screenshots, the task to HAVE started first (that's what you want, because it is the task of the slave).

  Typically for AO, you can simply write a unique period of your waveform, and then regenerate again and again.  Your waveform would be preset before the task starts.  If you need to update the waveform on the fly according to enter programming during execution of the task, you would disable the regeneration.  In addition, if the wave form is such that it cannot be easily represented by a predefined buffer (for example, it is a strange frequency which is not a same ditch at the bottom of the sample clock), then non-regeneration is the way to go.

  Best regards

• Continuously measure and write waveform using PDM

  Hi all

  I'm doing my thesis by using Labview 2010 (since this is the only version currently available in University ). I need to read and save data from the microphone (currently to simulate a signal because I need to make the program work first) then save and analise IT (has not reached this point yet). I tried to use the structure of the event in order to record and then play tdms files. But unfortunately it saves only a small piece, then I inserted while loop, so it will record continuously but the program is not responding after registration, I push and I can only manually close the toolbar it. Please does someone could help me or suggest that something since I'm not very good for Labview and any comment is welcome. Here's what I've done so now. I tried searching forums for a similar solution but did not find anything useful (some had a much newer version so I could not open). Thank you.

  Hi and welcome to the forums,

  The reason why you can not stop the waveform recording or exit the application is because you have the case of the events set to "lock the table until the end of the matter for this event" (in edition events). This means that LabVIEW will not respond to the user until the end of this structure of the event, but because you have the option to press the while loop stop to complete the structure of the event means that you have a blockage and abandon the VI.

  The architecture of your application is not ideal - I highly recommend everything that takes a long time to execute within the structure of your event for the above reason (obviously you can uncheck lock as a quick fix Panel). I think I have a look at the design of producer/consumer model (events) (new... > model > frameworks) because it would be more appropriate for your application. You can manage your button presses in the structure of the event and have a state machine in the loop at the bottom for starting, running and stopping of your data acquisition.

  The idea is that you don't do very little inside the event structure so it frees up the façade, but the messages (e.g. power acquisition data, quit the application) are managed by another loop.

  I don't know if it comes in LabVIEW 2010, but there are examples of projects that include a project in 2012/2013 "continuous measurement and logging" which may be suitable for your application. There are also examples of the State machines and managers of messages queued.

• Why the continuous measurement and Logging in LabVIEW 2012 Project uses strings instead of Enums and orders from the queue?

  Hello!

  I noticed that the continuous measurement and a project in LabVIEW 2012 Logging using chains instead of enums and orders from the queue. I wonder if there is a good reason for it?

  Kind regards

  Anguel

  First, string vs enum debate is probably the version of LabVIEW vim vs emacs. There are good arguments on both sides, and I doubt that there is always a "winner".

  A brief summary of our reasoning for the current state of the project examples:

  1. We used enums for the state machine because it is self-contained. A state machine will never tell himself to enter a State, he does not know. Knowing (as the programmer) all possible States with the help of an enum allows you to enlist the compiler in order to help us avoid mistakes to change the time (because you can't quite out an enum and LabVIEW can be said if you are not covering all cases to a structure of the case, etc..).

     Enums provide greater protection and rigidity by ensuring all withdrew at the time of publishing. This is often the 'default' recommendation that we do.

  2. We used strings for messages in queue manager because the producer of message and the message handler could be independent processes that are reused or traded. Channels avoid the need for the compiler to be able to connect the orders and push this responsibility to the programmer. This allows you to develop some sub-components independently as long as you agree to a series of channel commands that you can manage - you need not to share a file 'messages.ctl' or 'states.ctl '. It is conceivable a loop of message management a message it does not, how you can decide to either silently ignore it or will trigger an error (as we do in the model). The strings make it also easier if you want to swap the queues of LabVIEW outside by a TCP implementation for network vacilitate or intra-Processuse communication where the other end may or may not be written in LabVIEW.

     Channels to provide more flexibility (that is, you can add new commands to an existing via plugins system, you can pass parameters as part of the string, etc.) at the expense of pushing her potential errors at run time and to put more responsibility on the programmer.

  3. The actor's gifts frame a 3rd option - using classes such as messages. For me, it combines many of the advantages of these two enumerations (strictly typed, change errors) and strings (flexible and scalable), but with the disadvantage of being somewhat less transparent (you understand OO, be comfortable to navigate through a multitude of screws, legacy of understanding, etc.).

  I don't know there are other reasons, others to the breast OR had or seen as we validated models and examples of projects in-house, but here are my reasons. We know that we can not design for each situation there - our goal is to get useful models against new users to make them aware of what well thought LabVIEW programs are similar to experienced users know their applications better and I hope they do not hesitate to change what we provide or create their own designs, when they feel it's necessary. (On a side note, please share what you come up with - a community of experts sharing models would be really useful to us all LabVIEW users).

  Best regards

  Simon

• I frequently receive notifications "AW SNAP refractory Page" in all browsers, including Internet Explorer, Firefox, Chrome, Opera and Safari

  I frequently get AW SNAP Page Unresponsive notifications in all browsers, including Internet Explorer, Firefox, Chrome, Opera and Safari which seems to me that there is a set of operating system or a computer problem any.  I use one regularly well maintained (security scans, Defrag, CC Cleaner, etc.) of six year for laptop HP Pavilion 8205 with Windows XP Service Pack 3. This thing mended nuts makes me and, worse yet, no one seems to know the cause of it or a cure for it. I have a Microsoft Security Scanner and no infection occurred. Help, please!

  Hello

  -Did you change on your computer before the show?

  I suggest you follow the steps in this link that talks about a similar problem with a possible fix.

  http://answers.Microsoft.com/en-us/IE/Forum/IE9-Windows_7/Internet-Explorer-page-becomes-unresponsive-and-at/92965131-76fe-4f1F-9d93-609f7770fedc?msgId=d14e1569-69c5-41dd-97D7-7d839c5352b8

• Continuous measurement and logging model - Hang-Up of may because of the lost output

  The model of continuous measurement and logging in LabVIEW 2012SP1 has a flaw in the Acquisition and recording loop.

  Stop messages manager ignores all messages in the queue of messages. The note says:
  "Stop - empty the queue of all pending messages 'Connect'. Close the reference of TDMS files. "See the picture below.

  This concept breaks if the output message is issued while the Stop message is being processed. The time gap critical to do this is small, because the issue is posted on the front of the queue. But it depends on the treatment in the case of the Manager to stop. Large or small - it can happen.

  The symptom is the application block in an infinite waiting on the queue of message - all commands have no effect, as the rest of the loops are completed. Break terminates the application. Pause button doesn't work anymore. (see this entry forum)
  This problem may appear only after enforcement has become more complex and the schedule has changed - the fresco made model works and does not reveal the question.

  The cure: first of all I thought to preview the elements of the queue before they are scrapped selectively, one by one in the loop to stop, but that usually is not working either, because the output can happen precicely in the laps of time between overview and dequeue - don't forget no outputs are displayed on the front of the queue.

  I think the best option is to replace the flush of the queue in the Stop messages with a selective messages waiting managers one by one and check if the output is - if so, reseat it in the front of the queue. All other messages are discared. That look like this, have seen interesting parts...

  

  Here is the message loop to stop with the problem highlighted.

  As I'm not mistaken, I think it's better that NEITHER updates the model to avoid this problem.

  

  Here is the case of the resting State in the case of stop message:

  

  Us do not hang the CPU run a constant stream of messages ineffective because we only "Log" enqueue messages when we are in the valid state logging (a State of rest here is again a passthrough).

  

  The worst case, it's that there are number of register requests already in the queue when the system shuts down. After receiving the stop idling message, state transitions and other Log messages become non - ops due to the State.

  I consider the opportunity to post a few screws update

  ~ Simon

• How to make Windows "Operations and phone Bluetooth settings" in windows vista professional?

  When I pair a phone portable Bluetooth, I have windows "Operations and the Bluetooth phone settings", but if I want to open the window even for second time, how to get it. If I right click on the device, I see no option.
  Help, please
  Yogi

  Hello

  ·         What is the brand and model of the computer and the phone?

  ·         Do you use the computer laptop or desktop?

  ·         What application you use to connect?

  I suggest you to contact the software manufacturer / manufacturer of mobile phones for more information on this issue.

  You can check the links below.

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  The problems with Bluetooth devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices 

• I was trying to read a sd card in my phone opera and it stop my computer windows vista laptop.

  Original title: windows vista compatibility?

  I was trying to read a sd card in my phone opera and it stop my computer windows vista laptop. Is their a capacity problem or am I missing something. I have long phone trying to upload photos to save. Have I missed a program?

  Hi Garym.nsb, fl,

  ·         Did you do changes on the computer before the show?

  ·         You receive an error message?

  Follow the suggestions below for a possible solution:

  Method 1: Try to use the SD card on another computer and see if you can access the files.

  Method 2: Performance Automatic troubleshooting of Microsoft.

  Microsoft has automatic convenience store to find and troubleshoot hardware problems. Try the following steps to run the fix it.

  Visit the site and download Microsoft fix and run it with the following success:

  http://support.Microsoft.com/GP/hardware_device_problems

  Method 3: Try to use an external card reader to see if it helps.

  Let us know if it helps.

• When I try to put in operation and open Windows Defender I get one of the following errors: 0x800705b4, 0x800106ba, 0x800710dd.

  Cannot open Windows Defender

  When I try to put in operation and open Windows Defender I get one of the following errors: 0x800705b4, 0x800106ba, 0x800710dd.  What is the solution?

  When I try to put in operation and open Windows Defender I get one of the following errors: 0x800705b4, 0x800106ba, 0x800710dd.  What is the solution?

  You have the MSE, Microsoft Security Essentials, AVG, Norton or McAfee installed?
  If so, these programs are supposed to close Windows Defender.
  This is because they have their own advocates. 2 defenders running on the same computer is redundanr as well as to create conflicts.
  In short, if you have one of the above, you don't need Windows Defender.

  Is there another reason you want to open Windows Defender?

  P.S. Wrong forum for your question. He should go to the security forum.

• Windows vista update 3 of 3 will not set up, computer continuously, stop and restart; Unable to access computer

  Windows vista update 3 of 3 will not set up, computer continuously, stop and restart; Unable to access computer

  The link below has options to solve your problem of loop.

  http://support.Microsoft.com/kb/949358>

  04:17:0407/17/11

• Peripheral Bluetooth disconnects when "Bluetooth Headset operations and settings" window is closed

  So when I connect my Bluetooth headset to my laptop I have at the same time press the 'connect' button on my headset * and * open the Bluetooth Headset operations and settings window, then click on 'Connect' on there also.

  So my first question is:

  Why do I have to do a step totally superfluous alone time I want to connect my headset? It should be the case that once I've set up my headset with my laptop, it will automatically connect when I press the 'connect' button on my helmet. I wouldn't do more than that.

  My second question is:

  Why my headphones does not cut off when I close the Bluetooth Headset operations and settings window?

  It's the same problem that this guy has been seen two years ago:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Plantronics-M100-Bluetooth-headset-disconnects/a79abcf5-2f26-4240-A808-2d2042fe4e01

  Feature: Armel BSH10 Bluetooth stereo headset.

  Hello Teedjay,

  Thanks for posting your query on Microsoft Community forum.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. Going to Headset/Bluetooth Headset before working on this computer?
  2. Have you tried another Bluetooth device on this computer? Has been the result even?
  3. Have you tried the steps suggested in the thread you mentioned in your post? If yes what was the result and that do not try these measures after the method 1.

  Try the methods below and see if it works for you.

  Method 1:

  Run the hardware and devices troubleshooter.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  
  Method 2:

  If the problem persists, try to refer to the procedure described in the following Microsoft article and see if it helps.

   

  Add a Bluetooth device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

   

  Connect to Bluetooth and other wireless or network devices
  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• I paid but expiration date pop-up message continuously. And I called the company, but never responded. Also chat service is not served. What can I do?

  I paid but expiration date pop-up message continuously. And I called the company, but never responded. Also chat service is not served. What can I do?

  Persevering, but make sure that you connect successfully...

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )