controllers

Similar Questions

• Wireless game controllers?

  Hi there, people

  Can I use a third-party wireless gamepad that is NOT certified IFM, that is to say, an XBox 360, One, PS3, PS4?

  How about PDP AfterGlow PS3 wireless controller?

  What is the minimum Bluetooth protocol for connectivity: 2.0 and more?

  No such thing as a wireless game controller?

  Can you add a Bluetooth adapter to a wired remote?

  There need to be a driver of software installed on the AppleTV?

  Thank you for your time, James

  N ° you need a controller of the IFM. Other controllers will not interact with Apple TV. There is no facility to add drivers to Apple TV. Take a look at https://afterpad.com/mficontrollers/.

  TT2

• Official list of the supported (governed > MIDI controllers)? (10.2.2)

  Hello

  the most recent release notes of logic to say:

  New features/improvements

  • Logic offers now a new preference pane (control surfaces > MIDI controllers) which allows the automatic assignment of the controls for supported devices to control USB MIDI be enabled and disabled.

  Another place I found:

  

  Where can I find the list of controllers official up-to-date?

  Hello

  All this help?

  Automatically assign buttons of the MIDI controller, sliders and other controls with Logic Pro X 10.2.2 - Apple Support

  TDC

• Satellite Pro C650D - problems with the audio and game controllers

  Hello

  I recently had problems with my microphone and speakers/headphones and game controllers.
  Sometimes the microphone stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.

  Stakeholders sometimes still work when I connect headset.
  Some of the sounds are still coming through the speakers while some coming through the headphones.

  I have a usb game controller which also did not work everything properly.
  If I assign buttons in the program that they do not work in the game.

  All these devices are in Device Manager in a group that makes me think it's sort of annoying update doubtful that messes with them.

  Any body have similar problems or know what to do better?

  See you soon
  Laurin

  Hello

  Can you please send some details on the laptop model and the system you are using?

  With regard to the issue of sound/mic:
  > The microphone sometimes stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.

  Are you talking about internal microphone or external? This only happens using Skype?
  In your case I would test the microphone using different applications to make sure that is not a Skype related issue.

  > Yet sometimes the speakers work when I connect headset.
  I recommend this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65295

  The user has had a similar problem, but this phenomenon was linked to the Realtek HD Audio Manager settings.
  She wrote:
  + In the upper right corner, there is a small yellow folder called "Connector settings" in my version. +
  + There, finally I could re-enable the setting "enable popup dialog box, when the unit is plugged. +

  + So now when I plug an external speaker or headphones, it appears, and I select the option "helmet" (instead of "line-in"), and then the sound only through the headphones/ext.speaker.+

  Regarding the game controller:
  > I have a usb game controller which also did not work everything properly.
  > If I attribute buttons in the program, they do not work in the game.
  I put t think its problem of laptop in my opinion, you must make sure that the controller is compatible with the games you play and also recommended to check some info provided by the manufacturer of the game controller.

• Windows failed to update for HP - Bus USB and Ports, display controllers - HP w2408 widescreen LCD

  I have a new HP M9402 desktop with monitor Hp W2408 Summit.  I get a message to update windows for HP - Bus USB and Ports, display controllers - ACL from HP w2408 widescreen, but the windows download always fails.  I tried several times to download this update.

  Any help would be greatly appreciated.

  Hi all

  The solution to my problem of not being able to make updates to the window was to spend in an HDMI instead of VGA cable.

  BR / / JJG

• Compaq 15 laptop: USB bus controllers

  Hello all, I have problem with 'USB bus controllers', in Device Manager, there are the yellow triangle in the "other devices" section, only 1 of the three usb ports on my laptop work I assume that these two problems are related? I installed win7 x 64 don't bit (uninstalled win8) motherboard no CD 22 93.2F BIOS F34. Could someone please help, point me in the right direction where download the driver from, I tried to update driver, but no driver not found. Thanks in advance.

  Hello

  Still do not know what is your machine, please try:

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207

  Kind regards.

• Regarding the problem with network controllers

  Hello every1!
  
  I had a problem with the network controllers. I recently installed new windows in my laptop. Ultimate(64-bit) Windows 7 is. Everything was fine, except the LAN drivers. I got a drivers pack solution for drivers. We updated all the drivers except the network controller.

  When I bought my new hp Pavilion g6-1201tx a few years, I had a backup of my DVD players. But, due to virus attack, it has corrupted me n later when I tried to reinstall my windows, I had no option but to the install from the cd of windows 7.

  Now, my problem is that in the notification of networks, it shows that "network controller not installed driver. Even my bluetooth does not detect my wifi personal connection he used to before you reinstall windows. I am not able to find the appropriate driver from the hp site configuration too. His humble request to help me solve my problem regarding.

  Thank you.

  You are the very welcome.

  Here are links to the drivers you need.

  Wireless:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108905-1&cc=us&DLC=en&LC=en&OS=4063&product=5163244&sw_lang=

  Bluetooth:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-101174-1&cc=us&DLC=en&LC=en&OS=4063&product=5163244&sw_lang=

• PROFINET for cdaq controllers

  Hello

  Anyone know if the c-Series of Profinet slave module will work on the cDAQ programmers (RTOS)?  It is explicitly listed as compatible with the cRIO, but I can't find evidence that it will work on the cDAQ controllers.

  Thank you

  Wes

  Hi Wes,

  The PROFINET cRIO module requires the use of LabVIEW FPGA.  For this reason, it is not compatible with the cDAQ chassis without worrying if they are running an operating system in real time.

• How to re install the IDE controllers?

  I actually when I put any CD or DVD on my laptop it will slow down just at the moment when I opened my computer to check if its connected or not, and at least his deon can't connect, or my windows can read and when startup too because when the DVD inside the laptop its is not starting , but when I take wide windows suddenly start normally, I looked for a solution and I found this one on curtis:

  Open the Manager of device on your PC.
  
  Uninstall your two located under IDE controllers IDE channels.
  
  Reboot, let windows re install the IDE controllers and all should be good.

  And everyone was saying of his work, but I don't know how to do!
  
  Help, please!
  
  "" I need the DVD to repair my windows 7, bad ".
  
  .. .and at least it is not connected!
  
  

  Hello Mazinho.  I understand that you're curious how uninstall/reinstall your IDE controllers.
  
  I assume you are using Windows 8 based on your screenshot.  The steps should be similar for other versions of Windows as well.  Try the following.

  1. Using views of the subway or Office Windows + X key combination.  This opens the context menu.
  2. Select Device Manager.
  3. Expand the section of "controllers IDE ATA/ATAPI.
  4. Right click on "IDE controller' listed here and select"Uninstall ".  If you are prompted only remove the driver.
  5. Reboot the laptop.
  6. Loading Windows must be reinstalled the software for the device.

  If you have additional questions, do not hesitate to ask.  I wish you a great afternoon!

• Pilots and controllers missing

  Hi all. My HP Pavilion g6 crashed a week ago and had to change the hard drive. Download Windows 7 Home Premium. Now my laptop is missing drivers & controllers. I suspect these d & c have been installed at the factory as I got no recovery disk when I bought the laptop. My laptop is running on a 64-bit system.

  The missing drivers & controllers...

  PCI device

  ID: PCI\VEN_10EC & DEV_5209 & SUBSYS_3567103C & REV_01

  Error code: 28

  SM Bus controller

  ID: PCI\VEN_1022 & DEV_780B & SUBSYS_3567103C & REV_13

  Error code: 28

  Standard-VGA-Grafikkarte

  ID: PCI\VEN_1002 & DEV_6760 & SUBSYS_3567103C & REV_00

  Error code: 10

  Please is - can someone HELP me with these questions or direct me to where I can get the missing drivers for the computer laptop brand and moddel.

  Thanks in advance!

  Hello:

  Install the AMD chipset driver and restart.  You want the 49.7 MB file.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  Graphics card:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103101-1&cc=us&DLC=en&LC=en&OS=4063&product=5198288&sw_lang=

  Card reader:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103100-1&cc=us&DLC=en&LC=en&OS=4063&product=5198288&sw_lang=

• CompactDAQ controllers

  Hello

  I have a question about CompactDAQ controllers. Is it possible to access it remotely through an internet connection?

  As is - this program start run after the power is on or the user must manually switch? Is it possible to Setup to do it automatically?

  If it's bad advice, please recommend where I can ask this of?

  Thank you!

  Sorry for the late reply. I just thought I'd do some tests on a cDAQ-9139 here in the office (since we do not have here a 9132).

  I found that if I unplugged the power supply from the chassis while he was running (windows, in my case) and then reconnected the power, the frame automatically rebooted again. So, it would seem (from a test) you would not have to travel the 100 km to only press the power button. If you select a request of VI or LabVIEW file to open during the startup of the operating system that is installed on the stand-alone cDAQ, she should be able to automatically begin data acquisition.

  However, in my opinion, I want to emphasize that drops of current sudden can damage the power supply into the chassis. Thus, I advise to use an inverter (UPS) interruption that is changing a battery power if the source falls suddenly. Not only it would protect your device better, but it also means that any operation that is already running on the cDAQ would not be interrupted.

• Upgrading memory on the PXI-8105 controllers and PXI-8106

  Hello

  I've recently upgraded the memory of three PXIs; one with a PXI-8105 controller and two with the PXI-8106 controllers.  Both the 8105 and 8105 can have a maximum of 4 GB (2x2gb) DDR2-677 (PC2-5300) (see links below).  However, on the three systems, both the BIOS and the o/s only see 3.3 GB.  No idea why this might be the case?

  I tried to Flash the BIOS (v1.4 on the two PXIs), but without success.

  We use COTS memory (i.e. not purchased NOR) but I would be badly pushed to believe it is the cause of the problem.

  Thank you.

  Links;

  • The PXI-8105 http://sine.ni.com/nips/cds/view/p/lang/en/nid/202630 max memory capacity
  • The PXI-8106, http://sine.ni.com/nips/cds/view/p/lang/en/nid/203442 max memory capacity
  • Update BIOS page: http://digital.ni.com/public.nsf/allkb/9C9362590B05CD6E86256B270082164A

  I don't know about the BIOS reports less than 4 GB. Here's a blog post that best describes what I wanted.

• Nodes cDAQ controllers hardware front panel

  cDAQ controllers have a display port: so the panels before lapping screws can be displayed!

  Well, we know that LV RT cannot manage the property nodes réaccouplés façade elements (especially because the screws that typically run on an RT target do not have an active façade at run time).

  Is this always true with controllers cDAQ providing a display port? (for example, 9132)

  If you want to act on the Panel controls front of a VI running on this kind of material (for example, disabling and grizzled CTL,...), it'll work?

  What OS should I chosse to do?

  Hello

  You're right, previously, it was not possible to access the properties of the façade on RT systems. Our new generation of equipment based on LInux RT integrates a HMI "emulator" that allows you to interact with your façade.

  This first link provides info on the new DAQ Compact controllers generics:

  http://www.NI.com/white-paper/14029/en/

  This one shows what operating system is supported with which harware:

  http://digital.NI.com/public.nsf/allkb/35F1FD98520D6E0E8625783A005AF557

  And the last of them explain how to create a GUI for your system:

  http://www.NI.com/white-paper/12602/en/

  Kind regards
  Karine

• Derives from the system time when calling OR-Motion screw on PXI controllers

  Hello

  Just an email to avoid others wasting time when they are facing in this fantasy bug:

  We use PXI systems with Controllers NI PXI running Windows 7 and the 7340 family cards (PXI-7344). We have noticed that when the calls when it's through screws OR-Motion to question the different registers of the State (e.g. position, ADC value, general axis or the reference state) axis, the (Windows) system clock runs FASTER either. OR-Motion calls most are performed per second, faster windows clock works. When you get into the status for 4 axes 10 times per second (lines 100 ms rate), the drift is greater than 5%!

  I include here an example of program that reproduces this behavior.

  It is an essential question, for example if save you data with or from the timestamps, and it gets even worse if Windows is configured to periodically synchronize its own clock to a server via the NTP Protocol (it's how we noticed this problem in the first place). In this case, you see large discontinuities in your data every once in a while. Our systems must be running automatically and record data continuously throughout the year, so this bug is a real challenge.

  People at NOR been able to reproduce this bug too and are working on it (no idea of any CAR # yet). Note that this problem has not been seen on a DC non - OR Office running Windows 7 64 bit...

  The exact configuration is the following:

  Chassis PXI-1036

  PXI-8101 (or PXI-8102 on another system) controller

  4 PXI-7340 axes into the Groove 4, no physical connection for this test

  (PXI-6221 in slot 2, not used in this sample program)

  Windows 7 Enterprise SP1 32-bit English

  LabVIEW 2011 SP1 32-bit English

  OR-Motion 8.3

  2.6.2 PXI platform services

  (all software OR additional distribution 2012 DS1)

  Controller BIOS: improved 1.3.1 to 2.0.1f0, problem given the two versions of the BIOS

  I'll try to post here as soon as we receive news of NEITHER.

  Kind regards

  Vincent

  Hi all

  I wanted to let you know that the driver OR Motion 8.4 coming should solve this problem.

  Best regards

• CRIO controllers can be configured to accept several SNTP IP addresses?

  cRIO controllers can be configured to synchronize the SNTP servers using the following in ni - rt.ini:

  [TIME SYNCHRONIZATION]
  source_priority = sntp; RTC;
  source. SNTP. Enable = true
  source. SNTP. Address = 10.0.58.1
  source. SNTP. Interval = 60
  source. SNTP.port = 123
  source. SNTP.verbose = false
  source. SNTP.log = false

  However, more than one IP address be specified, in which case one of them goes down? I tried to use a semicolon-delimited list, but it does not work.

  Also, I wonder if the cRIO controller can be configured to accept broadcast SNTP from a remote machine, rather than send periodically SNTP requests to a remote machine.  Is this possible?

  Thank you for your help,

  Chris

  Chris:

  Unfortunately, the ini file can use an IP address to synchronize with the server. If you are looking for a method switch to a new address, your best bet is to change the routing/port forwarding IP of some material RIO is connected to. Alternatively, it may be possible pass by program files nor - rt.ini, but this requires the controller to restart.

  The cRIO does not accept remote broadcasts, either. I think the main reason is that it is not as consistent (from a deterministic point of view). The behavior and the calendar is more predictable, when the controller uses a method of request/receive, rather than waiting on a broadcast packet. The former option requires less CPU resources.

  I hope I was able to do at least some light on your question. Good luck!

• 2 replicated domain controllers or clone 1 DCs as cold standby

  Hi guys,.

  I don't know if this is the right forum to ask this question or maybe someone can divert my question. Any involvement of a Windows 2008 Server cold waiting without any network connection for a period of time, tombstone question? and the reason that I asked for, it is I think to perform replication from domain controllers 2 where 1 fail and 2nd DC to support, or just to clone standby and connect the network whenever the 1 domain controller fail.

  Appreciate any comment.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it