Conversion light AP1230B AP?

Similar Questions

• Conversion light wireless AIR SAP 1602

  Hi, we have many points of access AIR-SAP1602I-E-K9 who are currently working in stand-alone mode, we have now a 2504 Wireless LAN controller so is possible to convert the AIR-SAP1602I-E-K9 in light mode?

  Yes you can. Make sure you have at least 7.4.100.0 version on WLC in support of the AP of 1602.

  1. for the conversion of LWAP, use the recovery image. First download the rcvk9w8 software from this link.

  2. then, you copy the IOS to your TFTP server to your access point.

  3. the order, must be registered to the AP, is: archive download-sw/over tftp: / / /.

  Check these procedure:

  http://www.Cisco.com/c/en/us/TD/docs/wireless/controller/7-4/configurati...

  http://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/

  https://www.YouTube.com/watch?v=Fiv76UpStKI

  Concerning

  Remember messages useful rates

• Problem with Hello.

  Sometimes, when I tried to initiate or participate in a conversation, light of my integrated webcam has happened; but no image of me or others appeared. At other times, the light of the webcam has not turned on; No image of me or others appeared. Same results with firewall disabled.

  Detail said

  Sometimes, when I tried to initiate or participate in a conversation, light of my integrated webcam has happened; but no image of me or others appeared. At other times, the light of the webcam has not turned on; No image of me or others appeared. Same results with firewall disabled.

  This is what allowed to cure the problem: I had to disable Flashblock on the Web page.

• Conversion of Cisco Aironet 1130AG light in stand-alone mode

  Hello

  I just bought AIR-LAP1131AG. Unfortunately, I want stand-alone and not lightweight fashion.

  Yes, is there a procedure to convert to "AIR-AP1131AG?

  Thank you.

  Hello Michael,

  Yes, please follow this procedure for TFTP Re-imaging

  / * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman", "serif" ;} "}

  1) Go to your Computer and from the tool menu -> folder options ->uncheck the hide extensions for known file types option. 

  2) Download the IOS image ( you can get this ios image from cisco.com) on your desktop.

  3) Rename the image into c1130-k9w7-tar.default

  4) Give your computer Ethernet an address in the range 10.0.0.2 till

  10.0.0.30

  5) Run the tftp server on your computer.

      - Make sure that the directory of your tftp server is the desktop.

      - Specify the AP address on the tftp server if needed.

  6) Connect the AP to the computer with Ethernet cable.

  7) Remove the power from the AP.

  8) Press and hold Mode button on the AP, and insert the power jacket in the AP.

  9) Keep pressing on the Mode button for (20-30 seconds) until you see RED Led.

  10) Wait until the image installed and all led lights return to green 

  doesn't make sure that no firewall or antivrus is running on your computer.

  I hope this helps.

  Kind regards

  Talal

  =============

  Please note the answers that will help you

• Green flashing light on the Magic Mouse

  I thought that a green light flashing on the Magic Mouse 1 (not rechargeable), means that the necessary batteries replaced or recharged.  I put new batteries in, and yet the green light continues to blink.  This is a new mouse, sent to replace their defective Magic Mouse.  The defective mouse works, but I can't get the new one to work.  I can't get support to help me with this. I tried to use the conversation, and they have disconnected while I was writing my question. RRR

  Anthony,

  Look at my answer to the other thread.   It may be better to keep all questions here at the moment.   The other thread is no longer.

• Lights up turn of the computer - monitor remains blank

  • About 5 days ago, I was using my computer as usual. I have a game, was talking to some people and play music, everything works fine. Out of nowhere, my screen locked up, I thought he was just a typical gel, so I waited a minute or two while trying things like the Ctrl alt del and alt + tab, none of these things, do nothing at all. To speed up the process, I turned off the computer manually and turned it back. After back on the screen remains empty. When the device is turned on and that everything is working normally, the light on the power button on the monitor to blue. When the computer is not turned on but the monitor is, or when the computer is in "standby", the power button goes orange. After turning on the actual computer monitor screen remained pure black, and that the switch remained orange. The computer itself seems to turn on normally, the green light in the back turns on and remains solid, the two fans inside the Tower lights up and there is the noise of typical general snoring from the computer. Since then, I tried to unplug drain all the power and turn it back on, I reinstalled the RAM, I checked the card plugged into the VGA port has been completely connected (it was a problem in the past after sending in my computer when the VGA port had been fried. The symptoms at the time were essentially the same ones they are now corrected again when an operator HP had me check if this card was plugegd, it was not completely, I pushed it and it worked fine.) Anyway, this time I tried this card verification. I pushed a little more to check if that was the problem, it doesn't change anything. I tried another monitor (with a different cable), that doesn't change anything. My warranty on the computer turns off, so my only way to contact HP for help is with the online chat, and this conversation has done me any good. They had me try all the things I had already tried and then just told to take it into a store.
  • The computer in question is a HP Pavilion Media Center TV m8020n PC
    http://h10010.www1.HP.com/wwpc/ca/en/Ho/WF06b/12132708-12133156-12133158-12133158-12133158-79681383-80144481.html
  • The operating system is windows vista Home premium
  • I don't have something new installed recently, the only thing I can think anywhere near it at all in the last few weeks would try to load a camera to plug into a USB port on the front and put the memory card from the respective device in one of the memory of the computer on the front card readers.

  No, the second port works do not means that the embedded video is disabled. Here's a video explaining how to remove the video card. It has a tab, that you must move to release the card. Scroll down and you will see the different models.

  http://support.HP.com/us-en/document/c01177594

  It could still be the video card. Try to remove the card completely and the embedded video. Since your unable to see the screen, you can not enter the bios to see if the edge can be activated but sometimes when the card is to remove the edge can activate itself. If no luck, try another video card.

• How to defeat Google play Services taken in charge not error after conversion (reconditioning) apk for bar

  Hi guys,.

  Recently I converted (reconditioned) our app Android to Blackberry App (apk-> bar) using their recommended tool. The conversion was done successfully with Code signing. But after installing the bar, resulting in the camera, it shows Google play Services not supported error. I understand that Google play Services is Android specific operating system and not be supported directly by BB. But our needs of the application needs of Google Services play to run background location API services.

  After a little research had found an option to patch the APK file and remove game services coupled into that and then convert the striped apk / patched in bar file. Anyone can throw some light on this? Since I was looking for the apk to convert with the basic functionality (location Services) in the BB. Can it be replaced by similar location services, or something similar without changing the code? If Yes please let me know.

  Thanks in advance.

  Nice, one of the few to actually get an answer here.

  The only way to solve the problem, is to go into the source code of the application.  Find and delete all references to the Google Services play and/or include the services of alternatives (in rare cases, an alternative is available).  Keeping in mind, what specific BlackBerry will be * only * works on BlackBerry - so get ready to manage a separate version and the branch for your application goes forward.

  In any case, after however many hours it forces you to rewrite all the code sections that are facilitated by the Services of Google - play you can then try and repackage and submit your application on BlackBerry.  Moreover, assuming that you take someone elses APK and reconditioning without permission - which represents about 75% of the APK for BAR conversions in BlackBerry World today - the only solution is something like that.

  When you do that, you will have the privilege of working with the BlackBerry test team - who will probably reject your application a few dozen times for some reason, they may make up ("I've had them rejecting applications because a URL Pointant to http://appworld.blackberry.com ' has not used the name recommended for BlackBerry World - as Hello, it's not my URL to change).  But I digress from the topic, hope that helps.

• convert a light 1602i to stand alone?

  Someone has a link that explains how to convert a 1602i AP light standalone mode?

  Thank you!

  Joe

  Try these:

  By using a TFTP server to revert to a previous version

  http://www.Cisco.com/en/us/docs/wireless/access_point/conversion/LWAPP/upgrade/guide/lwapnote.html#wp160918

  http://www.YouTube.com/watch?v=QQ_NuxdRhQ4

  https://supportforums.Cisco.com/docs/doc-14960

• A stand-alone 1252 can be converted to AP light?

  I received incorrectly an AP 1252 (AIR-AP1252AS-E-K9 model number) and hope to convert to a light AP. But in the documentation for this device is missing in the list of devices that can be converted.

  I am also unable to find a tool to upgrade for this model.

  Is it possible to convert this device?

  Someone on the forum used the last upgrade tool and siad, he was able to convert the LWAPP 1252. You can try it, otherwise here are the steps of another Member on the conversion of these ap:

  Here is a method to perform the conversion.

  * Method 1: (Mode key) *.

  1. install an external tool of TFTP for example tftpd32 from http://tftpd32.jounin.net/ tool

  2. assignment of IP address in the range of 10.0.0.2 -.254 (Ex: 10.0.0.3) to the TFTP (your laptop or pc).

  3. download the IOS lwapp image on the tftp root directory. Use http://www.cisco.com or

  http://tools.cisco.com/support/downloads/go/IPCheck.x?defAdv=N&sftAdv=N&image=c1250-rcvk9w8-tar.124-10b.JA3&filepath=/swc/esd/02/crypto/3DES/281235915/guest&filename=c1250-rcvk9w8-tar.124-10b.JA3&advUrl=null&isk=Y&defInd=N&mdfid=281235915&sftType=Autonomous%20To%20Lightweight%20Mode%20Upgrade%20Image&optPlat=&relVer=12.4 (10B) JA3 & starts = 271159 & treeMdfId = 278875243 & tree_name = wireless

  4 rename c1250-rcvk9w8 - tar.124 - 10B .JA3 c1250-rcvk9w8 - tar.default

  5. make sure that you set the IP address on the IVB of the AP interface if it is not set. Set it in the 10.0.0.x range default is 10.0.0.1.

  6. connect the Ethernet port on the AP to your server TFTP (laptop)

  7 press and hold the mode button and power off of the AP.

  8 power back the AP while constantly maintaining the button mode for 20-30

  seconds.

  * Method 2: (Archive command) *.

  1. install an external tool of TFTP for example tftpd32 from http://tftpd32.jounin.net/ tool

  2. assignment of IP address in the range of 10.0.0.2 -.254 (Ex: 10.0.0.3) to the TFTP (your laptop or pc).

  3. download the IOS lwapp image on the tftp root directory. Use http://www.cisco.com or

  http://tools.cisco.com/support/downloads/go/IPCheck.x?defAdv=N&sftAdv=N&image=c1250-rcvk9w8-tar.124-10b.JA3&filepath=/swc/esd/02/crypto/3DES/281235915/guest&filename=c1250-rcvk9w8-tar.124-10b.JA3&advUrl=null&isk=Y&defInd=N&mdfid=281235915&sftType=Autonomous%20To%20Lightweight%20Mode%20Upgrade%20Image&optPlat=&relVer=12.4 (10B) JA3 & starts = 271159 & treeMdfId = 278875243 & tree_name = wireless

  4. make sure that you set the IP address on the IVB of the AP interface if it is not set. Set it in the 10.0.0.x range default is 10.0.0.1.

  5. connect the Ethernet port on the AP to your server TFTP (laptop)

  6. at the point of access, type archive download-sw / overwrite/force-reload tftp: / //c1250-rcvk9w8-tar.124-10b.JA3

  ****************************************************************************************************************************************

  The other direction (lwapp to stand alone)

  http://www.Cisco.com/en/us/docs/wireless/access_point/conversion/LWAPP/upgrade/guide/lwapnote.html#wp161272

  ****************************************************************************************************************************************

  If you must manually 'Prime' the LWAPP:

  Ap #lwapp AP ip address

  AP #lwapp ap ip default-gateway

  Ap #lwapp AP controller ip address

  Hostname ap AP #lwapp

  (optional)

• LWAPP: upgrading a 1242AG in light mode

  Hello

  I'm trying to upgrade a stand-alone gateway AP-AIR1242AG lightly, but evertime I start tool, the process is stopped, because the tool cannot reach the regulator. The tool recommends that I should allow Telnet, but it is already authorized.

  I can reach the management interface of ping, but something else (web, ssh, telnet) does not work

  the ap has the version 12.3 (7) JA1

  controller (wlc 5508) 7.0.98.0

  Upgrade tool 3.4

  12.3 (11) image JX1

  Can someone help me solve this problem?

  If it's a 1242 AP latest I just manually load the image Conversion LWAPP.

  by using this command

  Archives/force-reload download-sw / overwrite tftp: / //c1240-rcvk9w8-tar.124-21a.JA2.tar

• Coverting 2602 light to stand alone (for the site survey)

  Hello

  I have a conversion problem 2602 light on its own.  It will not start to standalone IOS.  The following is what I did.

  AP: value 10.0.0.1 IP_ADDR

  AP: the value of 255.255.255.0 subnet mask

  AP: tftp_init

  AP: ether_init

  AP: flash_init

  AP: tar - suchftp://10.0.0.5/ap3g2-k9w7-tar.152-2.JA.tar flash t:

  extraction begins

  After the extraction process.

  AP: set BOOT flash;/ap3g2-k9w7-tar.152-2.JA

  AP: start

  Please see attached figure of the AP.

  Thnaks

  If you have another image in flash you must remove it and try again to load the stand-alone image

  When you remove the capwap image file, you must delete each file inside this folder, and then delete

  empty the folder as a result using the rmdir command.

  -----------------------------------------------------------------------------------------------------

  Please don't forget to rate correct answers

• Light wireless Cisco to Converion autonomous on AP Cisco2600/2700

  Dear team,

  I have these two Access Points "AIR-CAP2702I-C-K9" and "AIR-CAP2602I-C-k9" and I need to convert them into Standalone/autonome Mode. Please let me know if it supports the conversion of light weight in standalone Mode?

  Is there any document detailing the same for Cisco 2602I/2702I Access Point?

  Kind regards
  Farhan.

  Please let me know if it supports the conversion of light weight in standalone Mode?

  Yes, stand-alone mode is supported.

  Is there any document detailing the same for Cisco 2602I/2702I Access Point?

  By using a TFTP server to revert to a previous version

• How to convert an AP 1700 / 2700 light mode to standalone mode?

  I know that support AP1700/2700 unified by version 15.3.3 mode.

  http://www.Cisco.com/c/en/us/TD/docs/wireless/access_point/15-3-3/configuration/guide/CG15-3-3/CG15-3-3-Chap1-overview.html

  But I couldn't change the mode because of the following error.

  AP1c6a.7a92.5468 #CAPWAP autonomous ap

  Convert a stand-alone image. Move forward? (yes / [No.]): Yes

  No found stand-alone image! The conversion failed.

  Why this error message displayed? Please tell me how I can solve this problem.

  Thank you.

  Atsushi

  According to me that ap1700 can start using a light image which is on the page of downloading software for AP2700/3700.  Is this correct?

  Yes, that's correct, according to this 1700/2700/2600/3600/3700 all have the same image starting with "ap3g2-xxx '.

  http://www.Cisco.com/c/en/us/TD/docs/wireless/access_point/iOS/release/notes/RN-15-3-3.html#32237

  Ap3g2

  1700I 2700I/2700E, 2600I/2600E, 3600I/3600E, 3700I/3700E

  HTH

  Rasika

  Pls note all useful responses *.

• The light yellow on the F12 key when I start my new HP computer

  Original title: not working f12 key...

  Dear Sir, I have purchase new computer hp laptop with OS back free... and I'm upgraded 8 victory... I am facing problem with the key f12... he had a small red light bulb and it is always on... I can't stop it... I do not use conection wifi wifi.disabled... but it does not stop... so please tell what to do now?

  .

  Hello Ben,

  Thank you for visiting Microsoft Community.

  According to the description, I understand that you bought a new HP laptop and Windows 8 is installed. Now when you start your computer the F12 key on the keyboard has a light that turns on automatically even when you are not using a Wi - Fi connection.

  New and most advanced laptops have OneTouch features. The F12 key with a yellow light on computers laptops HP are one of the main OneTouch for Wi - Fi. To turn on Wi - Fi, just press this button and it lights with a white light instead of orange (red) during a Wi - fi is disabled. Also when you turn on Wi - Fi even from network settings this turn key with white light.

  There is no problem with your laptop, it is the functionality of your new computer.

  For more information, you can view a conversation in a HP thread below:

  How can I activate (turn on) on my Envy laptop wireless?

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/how-do-I-enable-turn-on-wireless-on-my-envy-laptop/TD-p/858735

  Hope this information is useful. Feel free to write us again if you have any further questions or for any further assistance with Windows, we will be happy to help you.

• Color casts in the nuances of light on open images from Lightroom CC to CC PS.

  I notice strange color casts in the nuances of light on the images, I open Lightroom cc to CC PS.

  My monitor is calibrated, and two color management applications on. The files are RAW of Nikon since a D810.

  
  

  I get a separate green/blue dominant showing on paper background (grey seals) in the shade, and where the main light goes off around the subject. When I with the pipette sample there is a small amount of extra blue in RGB but not otherwise in other parts of the backdrop - so I think (hope), is a display problem only.

  
  

  When I choose to test in sRGB, the casting, disappear when I choose to work in CMYK, it persists. I wonder if the PS may be using labour CMYK to display my image on the screen - if so, how to spend it to sRGB or is there an alternative?

  OK, as long as you can trust what you see, it's good.

  In all cases, the fundamental problem is the same: somewhere along the chain of (the conversion of source in display profile profile) display color management, something breaks down and does not have the right result on the screen. It is usually the profile, but it could also be the conversion of profile itself, such as calculated by the GPU.

  Turn off travel, the logic of color management back to the CPU, GPU, which is much more robust and reliable.