conversion of iosxr ios ipsec configuration
We have a configuration of ipsec work on ios
!
door-key crypto KRING
pre-shared key BA2211RA1.ba.caixa key SeCretBA2211RA1 hostname
pre-shared key BA3618RA1.ba.caixa key SeCretBA3618RA1 hostname
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
life 3600
Crypto isakmp ISAPROF profile
Keychain KRING
FQDN of self-identity
match domain ba.caixa host identity
match domain se.caixa host identity
address - 10.144.0.15
!
!
Crypto ipsec transform-set esp-3des esp-sha-hmac VPN
!
crypto dynamic-map 10 DYNMAP
game of transformation-VPN
ISAPROF Set isakmp-profile
!
card crypto VPN_AG_EBT address Loopback21
card crypto VPN_AG_EBT 10-isakmp dynamic ipsec DYNMAP
!
!
Interface Port - channel1.521
card crypto VPN_AG_EBT
!
IOSXR configuration will be like this?
!
door-key crypto KRING
pre-shared key hostname
! crypto ISAKMP policy 1 3des encryption preshared authentication Group 2 life 3600 ! Crypto isakmp ISAPROF profile Keychain KRING FQDN of self-identity host identity domain match
! Crypto ipsec transform-set esp-3des esp-sha-hmac transform VPN ! Profile of crypto ipsec VPN_AG_EBT dynamic set type PFS group2 Set game of transformation-VPN ! interface of X / Y Crypto ipsec VPN_AG_EBT ! the thing is, part of the configuration of encryption as keychain are supported because they are used in some methods of authentication for routing protocols. true ipsec isn't on the 9 k, the current ucode has no place for this. Next gen it maybe and we are also working on a blade or an adapter that can help with this. I'll try to find an official statement that ipsec on the 9 k is not supported, but the more I Googled it, the more embarrassed, I also get a lot of things 'suggests' it should work. I'm working on the correction to disambiguate. I also check with CRS and XR12K guys what their support for ipsec in hw. Will report to the time where I hear. concerning Xander Tags: Cisco Support IOS IPSEC VPN with NAT - translation problem I'm having a problem with IOS IPSEC VPN configuration. /* crypto ISAKMP policy 10 BA 3des preshared authentication Group 2 ISAKMP crypto keys TEST123 address 205.xx.1.4 ! ! Crypto ipsec transform-set esp-3des esp-sha-hmac CHAIN ! ! Map 10 CRYPTO map ipsec-isakmp crypto the value of 205.xx.1.4 peer transformation-CHAIN game match address 115 ! interface FastEthernet0/0 Description FOR the EDGE ROUTER IP address 208.xx.xx.33 255.255.255.252 NAT outside IP card crypto CRYPTO-map ! interface FastEthernet0/1 INTERNAL NETWORK description IP 10.15.2.4 255.255.255.0 IP nat inside access-list 115 permit 192.xx.xx.128 0.0.0.3 ip 172.xx.1.0 0.0.0.3 */ (This configuration is incomplete / NAT configuration needed) Here is the solution that I'm looking for: When a session is initiated from the "internal network" to the "distance IPSEC - 172.xx.1.0/30 ' network I want the address scheme '10.15.0.0/16' NAT translation deals with '192.xx.xx.128/30' before forwarding via the IPSEC VPN Tunnel. For more information, see "SCHEMA ATTACHED". Any help is greatly appreciated! Thank you Clint Simmons Network engineer You can try the following NAT + route map approach (method 2 in this link) http://www.Cisco.com/en/us/Tech/tk648/tk361/technologies_tech_note09186a0080093fca.shtml Thank you Raja K Need help configuration IOS IPsec to enable communication between the VPN client Hi, I need help with the configuration of IPsec VPN router 2811. I want to allow communication between VPN clients, is that possible? I know that ASA, you can do this by using the command "permit same-security-traffic intra-interface". The fact is that each Client IP communicator installed, but when they tried to call each other, he failed. I guess that's because the connectivity between them is not permitted because of the VPN connection. Thanks in advance... Hello Try this: -. local pool IP 192.168.1.1 ippool 192.168.1.5 access-list 1 permit host 192.168.1.2< vpn="" ip="" addr="" of="" client=""> access-list 1 permit host 192.168.1.3< vpn="" ip="" addr="" of="" client=""> access-list 1 permit 10.10.10.0 0.0.0.255 < lan="" behind="" the=""> ISAKMP crypto client configuration group vpnclient key cisco123 ACL 1< binding="" the="" acl=""> ! --------Done------------- If you do NAT on the router then you might want to exempt your VPN traffic to be NAt had Assuming that the NAT of your router is overload of IP nat inside source list 111 interface FastEthernet1/0 ! ! - The access list is used to specify which traffic ! - must be translated to the outside Internet. access-list 111 deny ip 10.10.10.0 0.0.0.255 192.168.1.0 0.0.0.255 access-list 111 deny ip 192.168.1.0 0.0.0.255 192.168.1.0 0.0.0.255 Above two statements are exempt from nat traffic. access-list 111 allow ip 10.10.10.0 0.0.0.255 any<, permits=""> I would like to know if it worked for you. Concerning M The IOS IPSec VPN configuration Cisco router Hi experts, I have not configured the VPN for a long time on the routers so I want your recommendation on best practices. I need to run OSPF over it, so it must be GRE over IPSec I googled and I see the old type of config that I used to do with the use of the crypto map. Then I see config with profile Ipsec that is applied to the interface of tunnel (tunnel protection). I also see on the manual on isakmp profile... Is there an example of configuration that you can provide? This is site to site VPN with PAT most basic on the interface for the remote desktop for surfing the Internet. My routers are fairly recent. One is 2821 with new 12.4 T code and another 2921 router. Thank you Hello! I didn't have a corresponding exactly to your needs, but I did a. I set it up by hand while there might be errors in config. Flexible Netflow with IPSec configuration Hello I'm trying to configure netflow/flexible netflow on some 887 branch site routers, which have an IPSec tunnel to the main office. It is my understanding that the router will not encrypt the traffic it generates itself, so the standard netflow will not work. The workaround I've seen is to use nonstandard and flexible netflow. I tried to set up flexible netflow with the following configuration; exporter of workflow EXPORTER-1 destination 192.168.10.1 source Vlan1 9996 udp transport time-out of 60 model data flow meter FLOW-MONITOR-1 exporter EXPORTER-1 active cache timeout 60 netflow-original record dialer interface 1 FLOW-MONITOR-1 controller for the IP stream entry IP FLOW-MONITOR-1 output flow controller However this doesn't seem to work and our monitoring server receives all the data (I've used network monitor to capture traffic to see if the router sends traffic or not) When I check the flow seems not collect data (either incidentally, the site has a lot of users). CRF-R-DUM-001 #sh flow monitor FLOW-MONITOR-1 hidden Streams added: 164825 CRF-R-DUM-001 #sh flow statistics exporter EXPORTER-1 Statistics of the customer send: CRF-R-DUM-001 #sh flow Dialer interface 1 Interface Dialer1 FNF: monitor: FLOW-MONITOR-1 Direction: entry Traffic (IP): on FNF: monitor: FLOW-MONITOR-1 Direction: exit Traffic (IP): on I was wondering if someone could confirm that I am along in the right direction in terms of configuration, or am I missing a step which must be configured or if it has other commands that I can use to check the netflow exports Thanks in advance Brian Hi Brian,. Make sure you have the 'exit function' option added to your workflow exporter. For more information, see this blog: http://blogs.ManageEngine.com/netflowanalyzer/2011/04/01/NetFlow-data-export-over-IPSec-tunnels/ Kind regards Don Thomas Jacob NOTE: Please note the messages and close issues if your query answered Hello We have configured our PIX as below. Here, I would like a clarification on implecation access lists. I joined 'infinet1' crypto map and 'acl_out' - list access to the external interface, if any traffic entering under "infinet1" of the lists of access such as 101, 102, 103 etc. will again suffer conditions of access 'acl_out"list or not? We have seen that this is not the case! the conditions of "acl_out" work correctly with the rest of the traffic which is not under the control of IPSec accesses-lists. I need to enforce these conditions "acl_out" IPSec traffic too... How can I do? Concerning K V star anise Here is the configuration of my PIX: PIX520 # sh config : Saved : PIX Version 6.1 (1) ethernet0 nameif outside security0 nameif ethernet1 inside the security100 nameif ethernet2 security10 failover nameif ethernet3 dialup security80 Select xxxxxxxx passwd xxxxxxxx hostname xxxxxxx domain ciscopix.com fixup protocol ftp 21 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sqlnet 1521 fixup protocol sip 5060 fixup protocol 2000 skinny No fixup not protocol smtp 25 no correction 1720 h323 Protocol <--- more="" ---="">
names of access-list acl_out permit icmp any one acl_out list access permit tcp any host 10.21.1.42 eq telnet acl_out list access permit tcp any host 10.21.1.43 eq 1414 acl_out list access permit tcp any host 10.21.1.44 eq 1414 acl_out list access permit tcp any host 10.21.1.34 eq smtp acl_out list access permit tcp any host 10.21.1.34 eq pop3 acl_out list access permit tcp any host 10.21.1.34 eq 389 acl_out list access permit tcp any host 10.21.1.34 eq 1414 acl_out list access permit tcp any host 10.21.1.45 eq 1414 acl_out list access permit tcp any host 10.21.1.59 eq telnet acl_out list access permit tcp any host 10.21.1.34 eq www acl_out list access permit tcp any host 10.21.1.57 eq 1414 acl_out list access permit tcp any host 10.21.1.56 eq 1414 acl_out list access permit tcp any host 10.21.1.55 eq telnet acl_out list access permit tcp any host 10.21.1.49 eq ftp acl_out list access permit tcp any host 10.21.1.49 eq ftp - data access-list 101 permit ip 10.21.1.32 255.255.255.224 10.36.1.64 255.255.255.224 access-list 102 permit ip 10.21.1.32 255.255.255.224 10.36.1.32 255.255.255.224 access-list 103 allow ip 10.21.1.32 255.255.255.224 10.9.1.32 255.255.255.224 <--- more="" ---="">
access-list 104. allow ip 10.21.1.32 255.255.255.224 10.40.1.32 255.255.255.224 access-list 105 allow ip 10.21.1.32 255.255.255.224 10.64.1.32 255.255.255.224 access-list 106 allow ip 10.21.1.32 255.255.255.224 10.59.1.64 255.255.255.224 access-list 107 allow ip 10.21.1.32 255.255.255.224 10.59.1.32 255.255.255.224 access-list 108 allow ip 10.21.1.32 255.255.255.224 10.47.1.32 255.255.255.224 access-list 109 allow ip 10.21.1.32 255.255.255.224 10.5.1.32 255.255.255.224 access-list 110 permit ip 10.21.1.32 255.255.255.224 10.5.1.128 255.255.255.224 access-list 111 allow ip 10.21.1.32 255.255.255.224 10.5.1.96 255.255.255.224 access-list 112 allow ip 10.21.1.32 255.255.255.224 10.42.1.32 255.255.255.224 access-list 113 allow ip 10.21.1.32 255.255.255.224 10.42.1.64 255.255.255.224 access-list 114 allow ip 10.21.1.32 255.255.255.224 10.17.1.32 255.255.255.224 access-list acl_dialup allow icmp a whole acl_dialup list access permit tcp any host 192.168.2.9 eq 1414 acl_dialup list access permit tcp any host 192.168.2.9 eq 1494 access-list 117 allow ip 10.21.1.32 255.255.255.224 10.1.1.32 255.255.255.224 access-list 118 allow ip 10.21.1.32 255.255.255.224 10.38.1.32 255.255.255.224 access-list 119 allow ip 10.21.1.32 255.255.255.224 10.49.1.32 255.255.255.224 access-list 120 allow ip 10.21.1.32 255.255.255.224 10.51.1.32 255.255.255.224 access-list 121 allow ip 10.21.1.32 255.255.255.224 10.15.1.32 255.255.255.224
access-list 122 allow ip 10.21.1.32 255.255.255.224 10.53.1.32 255.255.255.224 <--- more="" ---="">
access-list 123 allow ip 10.21.1.32 255.255.255.224 10.27.1.64 255.255.255.224 access-list 124 allow ip 10.21.1.32 255.255.255.224 10.27.1.32 255.255.255.224 access-list 125 allow ip 10.21.1.32 255.255.255.224 10.27.1.128 255.255.255.224 access-list 126 allow ip 10.21.1.32 255.255.255.224 10.21.1.96 255.255.255.224 access-list 128 allow ip 10.21.1.32 255.255.255.224 10.27.1.96 255.255.255.224 access-list 130 allow ip 10.21.1.32 255.255.255.224 10.24.1.128 255.255.255.224
access-list 132 allow ip 10.21.1.32 255.255.255.224 10.24.1.32 255.255.255.224 access-list 134 allow ip 10.21.1.32 255.255.255.224 10.24.1.96 255.255.255.224 access-list 135 allow ip 10.21.1.32 255.255.255.224 10.34.1.64 255.255.255.224 access-list 136 allow ip 10.21.1.32 255.255.255.224 10.34.1.32 255.255.255.224 access-list 137 allow ip 10.21.1.32 255.255.255.224 10.55.1.128 255.255.255.224 access-list 138 allow ip 10.21.1.32 255.255.255.224 10.55.1.64 255.255.255.224 access-list 139 allow ip 10.21.1.32 255.255.255.224 10.19.1.32 255.255.255.224 access-list 140 allow ip 10.21.1.32 255.255.255.224 10.13.1.32 255.255.255.224 access-list 198 allow ip 10.21.1.32 255.255.255.224 10.0.0.0 255.255.0.0 access-list 197 allow ip 10.21.1.32 255.255.255.224 10.21.1.64 255.255.255.224 access-list 191 allow ip 10.21.1.32 255.255.255.224 10.21.1.128 255.255.255.224 access-list 115 permit ip 10.21.1.32 255.255.255.224 10.57.1.32 255.255.255.224 pager lines 20 opening of session <--- more="" ---="">
timestamp of the record recording console alerts monitor debug logging recording of debug trap debugging in the history record logging out of the 10.0.67.250 host interface ethernet0 car Auto interface ethernet1 Auto interface ethernet2 Auto ethernet3 interface Outside 1500 MTU Within 1500 MTU failover of MTU 1500 Dialup MTU 1500 IP outdoor 10.21.1.35 255.255.255.224 IP address inside 172.16.22.50 255.255.255.0 failover of address IP 192.168.1.1 255.255.255.0 dialup from IP 192.168.2.1 255.255.255.0 alarm action IP verification of information alarm action attack IP audit <--- more="" ---="">
failover failover timeout 0:00:00 failover poll 15 ip address of switch outside the 10.21.1.36 IP Failover within the 172.16.22.51 failover failover of address ip 192.168.1.2 failover ip address 192.168.2.2 dialup failover failover link history of PDM activate ARP timeout 14400 Global 1 10.21.1.62 (outside) Global (dialup) 1 192.168.2.10 - 192.168.2.20 NAT (inside) 1 172.16.150.1 255.255.255.255 0 0 NAT (inside) 1 172.16.150.2 255.255.255.255 0 0 NAT (inside) 1 172.16.150.3 255.255.255.255 0 0 NAT (inside) 1 172.16.150.110 255.255.255.255 0 0 NAT (inside) 1 172.16.150.150 255.255.255.255 0 0 NAT (inside) 1 172.16.150.151 255.255.255.255 0 0 NAT (inside) 1 172.16.150.153 255.255.255.255 0 0 NAT (inside) 1 0.0.0.0 0.0.0.0 0 0 <--- more="" ---="">
NAT (dialup) 1 192.168.2.0 255.255.255.0 0 0 public static 10.21.1.43 (Interior, exterior) 172.16.150.2 netmask 255.255.255.255 0 0 public static 10.21.1.44 (Interior, exterior) 172.16.150.3 netmask 255.255.255.255 0 0 public static 10.21.1.34 (Interior, exterior) 172.16.12.50 netmask 255.255.255.255 0 0 public static 10.21.1.42 (Interior, exterior) 172.16.150.151 netmask 255.255.255.255 0 0 public static 10.21.1.59 (Interior, exterior) 172.16.3.251 netmask 255.255.255.255 0 0 public static 10.21.1.45 (Interior, exterior) 172.16.150.1 netmask 255.255.255.255 0 0 public static 10.21.1.57 (Interior, exterior) 172.16.7.151 netmask 255.255.255.255 0 0 public static 10.21.1.56 (Interior, exterior) 172.16.13.50 netmask 255.255.255.255 0 0 public static 10.21.1.47 (Interior, exterior) 172.16.22.200 netmask 255.255.255.255 0 0 public static 10.21.1.55 (Interior, exterior) 172.16.22.2 netmask 255.255.255.255 0 0 static (dialup, external) 10.21.1.46 192.168.2.3 netmask 255.255.255.255 0 0 static (inside, dialup) 192.168.2.9 172.16.150.2 netmask 255.255.255.255 0 0
public static 10.21.1.49 (Interior, exterior) 172.16.22.10 netmask 255.255.255.255 0 0 public static 10.21.1.58 (Interior, exterior) 172.16.10.58 netmask 255.255.255.255 0 0 Access-group acl_out in interface outside acl_dialup in interface dialup access-group TCP 0 1414 permitto tcp 1414 permitfrom tcp 1024-65535 has established external route 10.0.0.0 255.0.0.0 10.21.1.41 1 external route 10.0.0.0 255.0.0.0 10.21.1.50 2 <--- more="" ---="">
external route 10.0.0.0 255.0.0.0 10.21.1.33 3 Route inside 172.16.0.0 255.255.0.0 172.16.22.243 1 Route outside 202.54.63.221 255.255.255.255 10.21.1.41 1 Route outside 203.197.140.9 255.255.255.255 10.21.1.41 1 Timeout xlate 23:59:59 Timeout conn 01:00 half-closed 0: 10:00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 sip 0:30:00 sip_media 0:02:00 Timeout, uauth 0:05:00 absolute GANYMEDE + Protocol Ganymede + AAA-server RADIUS Protocol RADIUS AAA server Enable http server http 172.16.25.2 255.255.255.255 inside http 172.16.25.1 255.255.255.255 inside SNMP-server host within the 10.0.67.250 SNMP-server host within the 172.16.7.206 No snmp server location No snmp Server contact
CMC of SNMP-Server community SNMP-Server enable traps no activation floodguard Permitted connection ipsec sysopt <--- more="" ---="">
No sysopt route dnat Crypto ipsec transform-set esp - esp-sha-hmac mumroset Crypto ipsec transform-set esp - esp-sha-hmac mumroset1 infinet1 card crypto ipsec isakmp 1 correspondence address 1 card crypto infinet1 101 infinet1 card crypto 1jeu peer 10.36.254.10 infinet1 card crypto 1 set transform-set mumroset1 infinet1 map ipsec-isakmp crypto 2 correspondence address 2 card crypto infinet1 102 infinet1 crypto map peer set 2 10.36.254.6 infinet1 crypto map peer set 2 10.36.254.13 infinet1 card crypto 2 set transform-set mumroset1 infinet1 map ipsec-isakmp crypto 3 correspondence address 3 card crypto infinet1 103 infinet1 card crypto 3 peers set 10.1.254.18 infinet1 card crypto 3 peers set 10.1.254.21 infinet1 card crypto 3 peers set 10.5.254.5 infinet1 card crypto 3 set transform-set mumroset1 infinet1 map ipsec-isakmp crypto 4 correspondence address 4 card crypto infinet1 104 <--- more="" ---="">
infinet1 card crypto 4 peers set 10.36.254.41 infinet1 card crypto 4 peers set 10.36.254.22 infinet1 card crypto 4 set transform-set mumroset1 infinet1 map ipsec-isakmp crypto 5 address for correspondence 5 card crypto infinet1 105 infinet1 crypto card 5 peers set 10.51.254.33 infinet1 crypto card 5 peers set 10.51.254.26 infinet1 card crypto 5 set transform-set mumroset1 infinet1 map ipsec-isakmp crypto 6 correspondence address 6 infinet1 card crypto 106 infinet1 crypto card 6 peers set 10.51.254.42 infinet1 card crypto 6 set transform-set mumroset1 infinet1 map ipsec-isakmp crypto 7 address for correspondence 7 card crypto infinet1 107 infinet1 crypto map peer set 7 10.1.254.74 infinet1 card crypto 7 set transform-set mumroset1 infinet1 map ipsec-isakmp crypto 8 correspondence address 8 card crypto infinet1 108 infinet1 crypto card 8 peers set 10.36.254.34 infinet1 crypto card 8 peers set 10.36.254.38 <--- more="" ---="">
infinet1 card crypto 8 set transform-set mumroset1 infinet1 map ipsec-isakmp crypto 9 correspondence address 9 card crypto infinet1 109 infinet1 crypto map peer set 9 10.5.254.14 infinet1 crypto map peer set 9 10.5.1.205 infinet1 card crypto 9 set transform-set mumroset1 infinet1 card crypto ipsec-isakmp 10 correspondence address 10 card crypto infinet1 110 infinet1 card crypto 10 peers set 10.5.254.10 infinet1 card crypto 10 set transform-set mumroset1 11 infinet1 of ipsec-isakmp crypto map correspondence address 11 card crypto infinet1 111 infinet1 11 crypto map set peer 10.1.254.54 card crypto infinet1 11 set transform-set mumroset1 12 infinet1 of ipsec-isakmp crypto map correspondence address 12 card crypto infinet1 112 card crypto infinet1 12 set peer 10.36.254.26 card crypto infinet1 12 set transform-set mumroset1 13 infinet1 of ipsec-isakmp crypto map
correspondence address 13 card crypto infinet1 113 <--- more="" ---="">
crypto infinet1 13 card set peer 10.1.254.58 card crypto infinet1 13 set transform-set mumroset1 14 infinet1 of ipsec-isakmp crypto map correspondence address 14 card crypto infinet1 114 infinet1 14 crypto map set peer 10.5.254.26 infinet1 14 crypto map set peer 10.5.254.29 card crypto infinet1 14 set transform-set mumroset1 15 infinet1 of ipsec-isakmp crypto map correspondence address 15 card crypto infinet1 115 crypto infinet1 15 card set peer 10.51.254.21 crypto infinet1 15 card set peer 10.51.254.18 card crypto infinet1 15 set transform-set mumroset 16 infinet1 of ipsec-isakmp crypto map correspondence address 16 card crypto infinet1 198 infinet1 16 crypto map set peer 10.1.254.46 card crypto infinet1 16 set transform-set mumroset1 17 infinet1 of ipsec-isakmp crypto map correspondence address 17 card crypto infinet1 117 infinet1 17 crypto map set peer 10.2.254.6 card crypto infinet1 17 set transform-set mumroset1 <--- more="" ---="">
18 infinet1 ipsec-isakmp crypto map correspondence address 18 card crypto infinet1 118 infinet1 18 crypto map set peer 10.36.254.17 infinet1 18 crypto map set peer 10.36.254.14 infinet1 18 crypto map set peer 10.36.254.21 card crypto infinet1 18 set transform-set mumroset1 19 infinet1 of ipsec-isakmp crypto map correspondence address 19 card crypto infinet1 119 infinet1 19 crypto map set peer 10.36.254.30 infinet1 19 crypto map set peer 10.36.254.37 card crypto infinet1 19 set transform-set mumroset1 20 infinet1 of ipsec-isakmp crypto map correspondence address 20 card crypto infinet1 120 crypto infinet1 20 card set peer 10.51.254.6 crypto infinet1 20 card set peer 10.51.254.13
card crypto infinet1 20 set transform-set mumroset1 21 infinet1 of ipsec-isakmp crypto map correspondence address 21 card crypto infinet1 121 infinet1 21 crypto map set peer 10.5.254.6 infinet1 21 crypto map set peer 10.5.254.21 <--- more="" ---="">
infinet1 21 crypto map set peer 10.5.254.25 card crypto infinet1 21 set transform-set mumroset1 22 infinet1 of ipsec-isakmp crypto map correspondence address 22 card crypto infinet1 122 crypto infinet1 22 card set peer 10.51.254.10 card crypto infinet1 22 set transform-set mumroset1 23 infinet1 of ipsec-isakmp crypto map correspondence address 23 card crypto infinet1 123 infinet1 23 crypto map set peer 10.1.254.114 infinet1 23 crypto map set peer 10.1.254.110 card crypto infinet1 23 set transform-set mumroset1 24 infinet1 of ipsec-isakmp crypto map correspondence address 24 card crypto infinet1 124 card crypto infinet1 24 set peer 10.1.254.117 card crypto infinet1 24 set peer 10.1.254.125 card crypto infinet1 24 set peer 10.1.254.121 card crypto infinet1 24 set peer 10.1.254.161 card crypto infinet1 24 set peer 10.1.254.157 card crypto infinet1 24 set peer 10.1.254.113 card crypto infinet1 24 set peer 10.1.254.145 <--- more="" ---="">
card crypto infinet1 24 set peer 10.1.254.141 card crypto infinet1 24 set transform-set mumroset1 25 infinet1 of ipsec-isakmp crypto map correspondence address 25 card crypto infinet1 125 infinet1 25 crypto map set peer 10.1.254.142 infinet1 25 crypto map set peer 10.1.254.138 card crypto infinet1 25 set transform-set mumroset1 26 infinet1 of ipsec-isakmp crypto map correspondence address 26 card crypto infinet1 126 infinet1 26 crypto map set peer 10.1.254.150 infinet1 26 crypto map set peer 10.1.254.162 card crypto infinet1 26 set transform-set mumroset1 27 infinet1 of ipsec-isakmp crypto map address for correspondence 27 card crypto infinet1 197 infinet1 27 crypto map set peer 10.1.254.130 infinet1 27 crypto map set peer 10.1.254.118 infinet1 27 crypto map set peer 10.1.254.126 infinet1 27 crypto map set peer 10.1.254.153
card crypto infinet1 27 set transform-set mumroset1 28 infinet1 of ipsec-isakmp crypto map <--- more="" ---="">
address for correspondence 28 card crypto infinet1 128 crypto infinet1 28 card set peer 10.1.254.146 crypto infinet1 28 card set peer 10.1.254.137 card crypto infinet1 28 set transform-set mumroset1 30 infinet1 of ipsec-isakmp crypto map correspondence address 30 card crypto infinet1 130 crypto infinet1 30 card set peer 10.27.254.49 card crypto infinet1 30 set transform-set mumroset1 31 infinet1 of ipsec-isakmp crypto map correspondence address 31 card crypto infinet1 191 infinet1 31 crypto map set peer 10.27.254.45 card crypto infinet1 31 set transform-set mumroset1 32 infinet1 of ipsec-isakmp crypto map correspondence address 32 card crypto infinet1 132 crypto infinet1 32 card set peer 10.24.1.60 card crypto infinet1 32 set transform-set mumroset1 34 infinet1 ipsec-isakmp crypto map correspondence address 34 card crypto infinet1 134 infinet1 34 crypto map set peer 10.1.254.154 infinet1 34 crypto map set peer 10.1.254.158 <--- more="" ---="">
card crypto infinet1 34 set transform-set mumroset1 35 infinet1 ipsec-isakmp crypto map correspondence address 35 card crypto infinet1 135 infinet1 35 crypto map set peer 10.51.254.38 card crypto infinet1 35 set transform-set mumroset1 36 infinet1 of ipsec-isakmp crypto map correspondence address 36 card crypto infinet1 136 infinet1 36 crypto map set peer 10.1.254.26 infinet1 36 crypto map set peer 10.1.254.29 infinet1 36 crypto map set peer 10.51.254.34 card crypto infinet1 36 set transform-set mumroset1 37 infinet1 ipsec-isakmp crypto map correspondence address 37 card crypto 137 infinet1 infinet1 37 crypto map set peer 10.51.254.30 infinet1 37 crypto map set peer 10.51.254.14 infinet1 37 crypto map set peer 10.51.254.17 card crypto infinet1 37 set transform-set mumroset1 38 infinet1 ipsec-isakmp crypto map correspondence address 38 card crypto 138 infinet1 infinet1 38 crypto map set peer 10.51.254.46 <--- more="" ---="">
card crypto infinet1 38 set transform-set mumroset1 39 infinet1 of ipsec-isakmp crypto map correspondence address 39 card crypto 139 infinet1 infinet1 39 crypto map set peer 10.5.254.33 infinet1 39 crypto map set peer 10.5.254.30 card crypto infinet1 39 set transform-set mumroset1 40 infinet1 of ipsec-isakmp crypto map correspondence address 40 card crypto infinet1 140 infinet1 40 crypto map set peer 10.5.254.18 infinet1 40 crypto map set peer 10.5.254.22 card crypto infinet1 40 set transform-set mumroset1
infinet1 interface card crypto outside ISAKMP allows outside ISAKMP key * address 10.36.254.10 netmask 255.255.255.255 ISAKMP key * address 10.36.254.6 netmask 255.255.255.255 ISAKMP key * address 10.36.254.13 netmask 255.255.255.255 ISAKMP key * address 10.1.254.18 netmask 255.255.255.255 ISAKMP key * address 10.1.254.21 netmask 255.255.255.255 ISAKMP key * address 10.5.254.5 netmask 255.255.255.255 ISAKMP key * address 10.36.254.41 netmask 255.255.255.255 <--- more="" ---="">
ISAKMP key * address 10.36.254.22 netmask 255.255.255.255 ISAKMP key * address 10.51.254.33 netmask 255.255.255.255 ISAKMP key * address 10.51.254.26 netmask 255.255.255.255 ISAKMP key * address 10.51.254.42 netmask 255.255.255.255 ISAKMP key * address 10.1.254.74 netmask 255.255.255.255 ISAKMP key * address 10.36.254.34 netmask 255.255.255.255 ISAKMP key * address 10.36.254.38 netmask 255.255.255.255 ISAKMP key * address 10.5.254.14 netmask 255.255.255.255 ISAKMP key * address 10.5.254.10 netmask 255.255.255.255 ISAKMP key * address 10.1.254.54 netmask 255.255.255.255 ISAKMP key * address 10.36.254.26 netmask 255.255.255.255 ISAKMP key * address 10.1.254.58 netmask 255.255.255.255 ISAKMP key * address 10.5.254.26 netmask 255.255.255.255 ISAKMP key * address 10.5.254.29 netmask 255.255.255.255 ISAKMP key * address 10.1.254.46 netmask 255.255.255.255 ISAKMP key * address 10.2.254.6 netmask 255.255.255.255
ISAKMP key * address 10.36.254.17 netmask 255.255.255.255 ISAKMP key * address 10.36.254.14 netmask 255.255.255.255 ISAKMP key * address 10.36.254.21 netmask 255.255.255.255 ISAKMP key * address 10.36.254.30 netmask 255.255.255.255 <--- more="" ---="">
ISAKMP key * address 10.36.254.37 netmask 255.255.255.255 ISAKMP key * address 10.51.254.6 netmask 255.255.255.255 ISAKMP key * address 10.51.254.13 netmask 255.255.255.255 ISAKMP key * address 10.5.254.6 netmask 255.255.255.255 ISAKMP key * address 10.5.254.21 netmask 255.255.255.255 ISAKMP key * address 10.5.254.25 netmask 255.255.255.255 ISAKMP key * address 10.51.254.10 netmask 255.255.255.255 ISAKMP key * address 10.1.254.114 netmask 255.255.255.255 ISAKMP key * address 10.1.254.117 netmask 255.255.255.255 ISAKMP key * address 10.1.254.125 netmask 255.255.255.255 ISAKMP key * address 10.1.254.121 netmask 255.255.255.255 ISAKMP key * address 10.1.254.161 netmask 255.255.255.255 ISAKMP key * address 10.1.254.157 netmask 255.255.255.255 ISAKMP key * address 10.1.254.113 netmask 255.255.255.255 ISAKMP key * address 10.1.254.145 netmask 255.255.255.255 ISAKMP key * address 10.1.254.141 netmask 255.255.255.255 ISAKMP key * address 10.1.254.142 netmask 255.255.255.255 ISAKMP key * address 10.1.254.138 netmask 255.255.255.255 ISAKMP key * address 10.1.254.150 netmask 255.255.255.255 ISAKMP key * address 10.1.254.162 netmask 255.255.255.255 <--- more="" ---="">
ISAKMP key * address 10.1.254.130 netmask 255.255.255.255 ISAKMP key * address 10.1.254.118 netmask 255.255.255.255 ISAKMP key * address 10.1.254.126 netmask 255.255.255.255 ISAKMP key * address 10.1.254.153 netmask 255.255.255.255 ISAKMP key * address 10.1.254.146 netmask 255.255.255.255 ISAKMP key * address 10.1.254.137 netmask 255.255.255.255 ISAKMP key * address 10.27.254.49 netmask 255.255.255.255 ISAKMP key * address 10.27.254.45 netmask 255.255.255.255 ISAKMP key * address 10.24.1.60 netmask 255.255.255.255 ISAKMP key * address 10.1.254.154 netmask 255.255.255.255 ISAKMP key * address 10.1.254.158 netmask 255.255.255.255 ISAKMP key * address 10.51.254.38 netmask 255.255.255.255 ISAKMP key * address 10.1.254.26 netmask 255.255.255.255 ISAKMP key * address 10.1.254.29 netmask 255.255.255.255 ISAKMP key * address 10.51.254.34 netmask 255.255.255.255 ISAKMP key * address 10.51.254.30 netmask 255.255.255.255 ISAKMP key * address 10.51.254.14 netmask 255.255.255.255 ISAKMP key * address 10.51.254.17 netmask 255.255.255.255 ISAKMP key * address 10.51.254.46 netmask 255.255.255.255 ISAKMP key * address 10.5.254.33 netmask 255.255.255.255 <--- more="" ---="">
ISAKMP key * address 10.5.254.30 netmask 255.255.255.255 ISAKMP key * address 10.5.254.18 netmask 255.255.255.255 ISAKMP key * address 10.5.254.22 netmask 255.255.255.255 ISAKMP key * address 10.1.254.110 netmask 255.255.255.255 ISAKMP key * address 10.5.1.205 netmask 255.255.255.255 ISAKMP key * address 10.51.254.21 netmask 255.255.255.255 ISAKMP key * address 10.51.254.18 netmask 255.255.255.255 part of pre authentication ISAKMP policy 18 encryption of ISAKMP policy 18 ISAKMP policy 18 sha hash 18 1 ISAKMP policy group ISAKMP duration strategy of life 18 86400 Telnet 172.16.0.0 255.255.0.0 inside Telnet 172.16.0.0 255.255.0.0 failover Telnet timeout 10 SSH timeout 5 Terminal width 80 Cryptochecksum:c7d3741007174e40b59a5b4e3c86fea7 PIX520 #. The fact that you have: > permitted connection ipsec sysopt in your config file means that any IPSec packet is allowed in and ignores all the normal safety rules. You can delete this order, but you will then need to add a bunch of lines to your acl_out ACL to ensure that ISAKMP (UDP 500) and IPSec (IP prot 50) are allowed in each peer IPSec individual, more add incoming versions of all your ACL crypto. Cisco IOS IPSec failover | Route based VPN with HSRP I can find the redundancy of vpn IPSec using policy based VPN with HSRP. Any document which ensures redundancy of the road-base-vpn with HSRP? OK, I now understand the question. Sorry, I have no documents for this task. I can see in the crypto ipsec profile that you will use under the Tunnel interface configuration to enable the protection, you can configure the redundancy: How to configure IPSEC to encrypt all traffic form one end of your network to another Create an access list 'Interesting address' and call this access list in your crypto config file. HTH > Copy the IOS Aironet configuration I created a 1041 AP running IOS autonomous. No controller. I have three that I want to copy the configuration of the installation on others. I have the right document, but need someone to help tell me what commands will get my set of AP configuration a FTP'd to my computer and how to copy this configuration back to another model of the same access point. This way I don't have to change a few more settings of the AP instead of starting from scratch. Thanks in advance, Kirk What I am referencing begins under article 20-10 http://www.Cisco.com/en/us/docs/wireless/access_point/12.4_10b_JA/configuration/guide/scg12410b.PDF HI Kirk, To copy the configuration of AP to PC, you can run the command below. My preference would be to use tftp instead of tftp. copy: the execution of the system-configftp://x.x.x.x/ap.txt or copy running-config tftp://x.x.x.x/ap.txt t Top of page PC of AP copy, you could use command below. copy tftp://x.x.x.x/AP.txt startup-config (where x.x.x.x is the ip address of the tftp server and ap.txt is the name of the configuration file) Make sure that you are able to ping to the ip address of tftp to the AP before trying the copy procedure. Hope that helps. Concerning Najaf Please rate when there is place or useful! Pitfalls of Logging IOS - default configuration? Log configured by default on IOS 12.1 and above traps? If so, the default debug value? for example, if you don't see 'logging trap' in the config file - this does not mean logging is NOT enabled. Opening session, logging traps are by default configs - logging in buffered memory is not. Answer please if you can confirm this - thank you! Hello Logging settings can vary with the version of IOS. I can tell you, "logging console debugging" is enabled by default in most of the IOS versions. 'consignment of information trap' and "no logging not stamped" may be the default with most of the versions. Rather than trying to look for documentation see what that default value to recovery with different versions parameter record, well, we recommend that you use the command 'Show log' to check the status of the different types of logging and it will look something like this. Journal of #show R1 Syslog logging: activated (0 messages fell, 1 messages limited rate, 0 flashes, 0 overruns, disabled xml) Recording console: level 34 messages saved, debugging, xml disabled Monitor logging: level 0 messages saved, debugging, xml disabled Logging buffer: disabled disabled xml Logging size Exception (4096 bytes) County and logging messages timestamp: disabled Logging trap: informational level, 38 lines of journaled message All of the above settings are by default in this router running IOS version 12.2. HTH Sundar A Site at IOS IPSEC VPN and EIGRP Hello I have a connection of remote site to base via a VPN IPSEC router. I don't want to run EIGRP accoss VPN. Howerver I want adverstise the rest of the network from the router of core of the subnet to the remote site. The remote VPN subnet is managed as a route connected on the router base? Configuriguring a statement of network to the remote site on the router base will cause EIGRP announce the road? You are right. RRI (reverse Route Injection) is the correct way to announce remote routes as static routes on the HUB, and all what you need to do is redistribute static in EIGRP, so she is redistributed in your EIGRP. Here is an example configuration: http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00809d07de.shtml (It's about OSPF and IPSec VPN dynamics, however, the concept is the same for ipsec site-to-site and redistribution in EIGRP) Hope that helps. PIX, IOS ipsec troubleshooting commands I'm checking isakmp and negotiate IPsec between a PIX 535 and a router in 1711, but do not have knowledge of the command to check the Phase 1 and Phase 2 on both devices. They ping each other, then connectivity is not a problem, but I have no evidence of the negotiations going on on the other end. Does anyone know what the ' see the #' orders are to check active negotiations of Phase 1 and Phase 2 between these boxes? Thank you Marc Hi Marc, The basic display orders are ' show crypto isakmp his ' ' show crypto ipsec his ' to show active sessions in search "QM-IDLE" on the isakmp his and active incoming and outgoing his on ipsec. Debugs is also useful for establishing where a problem might ask. "debug crypto isakmp" debug crypto ipsec' ''(router only) engine debug crypto. The following doc is a good source of info. http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_tech_note09186a00800949c5.shtml Good luck Paul. FB4.5 iOS package configuration to use AIR 2.7 Hi all I want to update my Flash Builder to make mobile connections Manager for Android and iOS uses the new AIR 2.7 SDK. How can I do this? I downloaded the AIR SDK 2.7, but the instructions say I need to use the command line - but I would like it is integrated into my version of FB4.5. Please notify. Thank you! According to this article, Adobe will release the update of real FlashBuilder this month... http://blogs.Adobe.com/flashplayer/2011/06/Adobe-Air-2-7-now-available-iOS-apps-4x-faster. html Simple IOS VPN IPsec HUB and Spoke failover HUB Hi all I have a nd architecture VPN Hub spoke with Asit, IKEv1 and IPsec. My hub is connected to a single service provider. I wish I had a hardware redundancy for my hub. Instead of creating a double tunnel in each Department, I would like to use my router 4000ISR failover protocol. Is it possible to simply achieve? If I use IOS IPsec failover that I need to deploy my changes on the two router or (such as ASA) I can set the active router and allow the watch to receive the chenges? Thanks to you all. Johnny If your ISP connection is one that has a routed block and you can connect two routers same in it, you can then configure HSRP. The source of the Tunnel becomes the HSRP address. Rays may not know that there are two routers. Easy failover. Alternatively, you can have a single tunnel with hubs double (if you do not use HSRP). You don't have to borrow the double tunnels. IOS router VPN Client (easy VPN) IPsec with Anyconnect Hello I would like to set up my router IOS IPsec VPN Client and connect with any connect. It would be perfect to give the user the choice of SSL or IPSec protocol. And the user needs that the Anyconnect Client. I think it's possible with a Cisco ASA. But I can also do this with an IOS router? Please let me know how if this is possible. Also is it true that the IOS routers are not affected to hear bug bleed? SSL VPN and SSL VPN with Anyconnect page is also save? http://Tools.Cisco.com/Security/Center/content/CiscoSecurityAdvisory/CIS... But I am in any way interested in using IPSec and SSL VPN on a router IOS... It's true - CCP does not yet offer the options to configure a VPN IPsec with IKEv2. The configuration guide (here) offers detailed advice and includes examples of configuration. I can't access some websites using Firefox. Pages say "File not found" or in the case of Yahoo and Facebook, they resemble the on-screen text files. No problems with my computer and it is not the case with my browsers IE and Chrome. Already deleted a I forgot my iCloud I d and password HI, I forgot my id and password [email protected] iCloud helpme pleace Downgrading from Vista to Windows XP Home in Satellite P200-16 b Hi people! I wonder if someone has already tried to downgrade from Windows Vista to Windows XP. I have a Satellite P200-16 b.I was check in the support Web site and I found most of the pilots it but I think not all. Please post your comments here.Tha What is original style of font size in Notepad in vista I made a goof and must return to the original default values in Notepad. I am running Vista... Help! Logging of e-mail to the mail via tunnel server I have problems to set up e-mail logging on an ASA 5510 to my system remotely. We are connected through the VPN site-to site. I have the SMTP server defined on our server of mail on the main site, but traffic does not through the tunnel. I can remoSimilar Questions
Cache type: Normal
Cache size: 4096
Current entries: 11
High Watermark: 403
Flow of years: 164814
-Timeout active (60 seconds) 22720
-Timeout inactive (15 seconds) 142094
-Aged event 0
-Watermark 0
-Aged 0 emergency
Exporter of flow EXPORTING-1:
Packet statistics send (cleared last 6d05h there):
Successfully sent: 69071 (13068236 bytes)
Client: Flow FLOW-MONITOR-1 monitor
Records added: 164840
-sent: 164840
The bytes added: 8736520
-sent: 8736520
cisco(config)#crypto ipsec profile VTIcisco(ipsec-profile)#?Crypto Map configuration commands: default Set a command to its defaults description Description of the crypto map statement policy dialer Dialer related commands exit Exit from crypto map configuration mode no Negate a command or set its defaults redundancy Configure HA for this ipsec profile responder-only Do not initiate SAs from this device set Set values for encryption/decryption
cisco(ipsec-profile)#redundancy ? WORD Redundancy group name
cisco(ipsec-profile)#redundancy MRT ? stateful enable stateful failover
I suggest that it is the same as redundancy card crypto. But no documentation or examples found...
(where x.x.x.x is the ip address of the tftp server and ap.txt is the name of the configuration file)
Is it possible to configure an IPSec and SSL VPN Client on IOS router? I use for example a 1841.Maybe you are looking for